Any advice on dialog control slow path?

Similar Questions

• My laptop that is running windows xp does not recognize the computers on the network running windows 7. Any advice?

  I recently created my home network again.  It consists of a laptop running windows 7 Professional 64 b, b Office windows 7 Professional 32 running and a netbook under windows xp home.  Two computers running windows 7 recognize each other and share correctly, but the netbook will not recognize the other computers on the network at all.  They can see it, but then say they can't access them when you are trying to access.  They are all on the same workgroup.  Computers that run windows 7 discovered the network, file and printer sharing, and public folder sharing all lit.  Password sharing is disabled and windows manages the homegroup connections.  Any advice would be appreciated, I need to use computer dvd players 7 on the network to install some things on the netbook.

  Hi mahmorc,

  ·         You get the error message?

  Follow these methods.

  Method 1: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  http://support.Microsoft.com/kb/308007

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Update the latest drivers for the network card.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• When I open a PDF file, I get the following message "invalid plugin detected Adobe Acrobat reader DC will leave" I reinstalled Adobe DC but still the same problem, it happens with all PDFs. Any advice much appreciated.

  When I open a PDF file, I get the following message "invalid plugin detected Adobe Acrobat reader DC will leave" I reinstalled Adobe DC but still the same problem, it happens with all PDFs. Any advice much appreciated.

  Hi Stephen39,

  Do you have any 3rd party plugin installed for Adobe Reader? If not, close all instances of Adobe Reader running and delete the entire folder to: C:\program Adobe [version] \Reader\plug_ins.

  Now go to control panel > programs and features. Locate the entry for Adobe Reader X and choose to repair the installation.

  If you do not have a 3rd party plugin installed, try to uninstall them and see if the problem is related to the same. If it works, let me know what plugins have been the origin of the problem so that I can have a look.

  If all goes well, this should fix things.

  Thank you

  Nicos

• Is there any fix planned for the slow lingering and pervasive in LR6/cc?

  LR6, Win7, 6 GB of ram

  Is there any fix planned for the slow lingering and pervasive in LR6/cc? I disabled the GRU.  I cleared the cache.  My catalogs are updated to LR 5.7.1.  Everything is slow.  It doesn't matter what it is.  Its takes twice as much time to do something.  LR will freeze for 5 to 15 seconds at a time without apparent reason.  The use cases are to go "Not responding" are numerous and vary widely.  I check the CPU during these events Nn sensitive usage and its pretty much slowed down.  I have check the disk usage and its also generally inactive.

  I thought it might be VSCO plugins, but it's not.  LR5.7.1 is always screaming fast while LR6 is an old slow cow.

  Here is an example that I saw that is repeatable:

  (1) start an import

  (2) choose the photos from an SD card

  3) click the + to add them to the catalog

  4) appears to enter a catalog name

  (5) start to type in the dialog box.
  (6) after may entered 8 letters, LR goes "Not responding", 10 seconds

  (7) after LR starts responding again, emphasis on catalog name field has been lost

  There is no reason for a freezing here.  The CPU does nothing.  The drive does nothing.

  There are things like that in every sense.

  Another example.

  (1) develop the Mode

  (2) select a photo

  (3) left and right panels are hidden

  (4) browse the side panel right of the mouse so that it will pop-out

  5) LR freezes for 5 seconds

  6( ) when the right panel opens, click on the number of exposure (0) and try to type in 1.25.

  7( ) after after graduating 1,2, LR hangs for 10 seconds.

  8( ) when LR answers once again, finishing by typing in the 5 other (1.25) and press to enter.

  9( ) the image immediately illuminates as expected.

  Yay!  They have updated LRCC/6 today.  The slowness and latency seem to have disappeared! Yay!  I can get back to work!

• Someone else has Apple Airplay jumping and drop outs when streaming music?  WiFi is not the problem, and there is nothing around the units of airtime to interference.  Impossible to listen to music.  Thanks for any advice.

  I've recently updated several broadcasts in my house from V1 to V2 in the hope of resolving a constant jumping and abandonment problem I always had when playing music with Airplay.  I have a unit of airtime plugged directly on my stereo receiver that feeds music throughout my house.  My WiFi connection is not the problem and there is nothing to cause interference.  Airplay modules are not more than 15 feet distance modem or range Extenders.  Someone else has this problem and, hopefully, a solution?   I'm tired of doing factory reset all the time.  Many thanks for any advice.

  I've recently updated several broadcasts in my house from V1 to V2 in the hope of resolving a constant jumping and abandonment problem I always had when playing music with Airplay.

  By "Airplays" what are you actually refers to... Base station airPort Express, Apple TV, or something else?

  ... and "V1 to V2" do you mean you replaced a 1st generation 802.11n AirPort Express with a 2nd generation?

  Airplay modules are not more than 15 feet distance modem or range Extenders.

  When steaming audio with AirPlay, the flow goes first to the device host to iTunes to the router Wi - Fi, this unit is connected to. From there, he will travel to the AirPlay "speaker". A president could be an AirPort Express, Apple TV or an AirPlay device ready another manufacturer. If you use line extensions, the flow must go through those as well... so there is potential bottlenecks between the host and the speaker. One of these could be the cause of the issue you found.

• My iphoto does not open. When I click on the circle still turns but nothing happens. I tried to open it with option to order and reconstruction, and nothing happened. I have version 9.2.3. Any advice will be greatly appreciated.

  My iphoto does not open. When I click on the circle still turns but nothing happens. I tried to open it with command + option and reconstruction and nothing happened. I have version 9.2.3. Any advice will be greatly appreciated.

  If you recently updated to El Capitan, your version of iPhoto is not compatible with this OS.

  What version of Mac OS X are you running?

• Submit an RSS feed to itunes, but I keep getting a message saying 'cannot submit your feed. There is no description tag in your diet, or the description tag is empty. "Any advice on how to solve this problem?

  Our podcast is released through Libsyn, who confirmed to me that our RSS feed is valid. I talked to two Libsyn and itunes support or knew what it is I do. Thanks a lot for any advice you may have.

  RSS feed: http://enslavedbythebell.libsyn.com/rss

  I went and tweaked your workflow slightly.

  Try to send back you your feed now.

  Rob W

  libsyn

• On March 28, my ipad 2 use osi 9.2.1 air would not allow internet browsing so I updated to 9.3... I always have the same question. Any advice?

  On March 28, my ipad 2 use osi 9.2.1 air would not allow internet browsing so I updated to 9.3... I always have the same question. Any advice?

  Unfortunately, this is a common problem.

  Try turning off JavaScript under settings - Safari - Advanced.

  You can find more information at the link:

  For those having issues with the iOS 9.3 update please read...

  New construction of iOS with the latest bugfixes 9.3 is now available for download

• New Iphone 6s says the latest version of itunes that I have. any advice?

  I'm trying to set up my new 6 s. when it's plugged in it says that he needs the latest version of itunes that I have (11.4). I can't synchronize my computer nor the iCloud. any advice?

  It is not latest version of iTunes he. What version of Mac OS X on your Mac? Most likely, you need to update your OS X in order to install the latest version of iTunes.

• When I print a table (multiple pages) the text box under the table seems to be moving under the table and prints with the table of this overlap. My only solution is to push the text box further down the page before printing... Any advice?

  Im having problems shaped a text box so that my table does not print right on top of it. I want it inside of my table (it's 'tems and conditions' budget)

  Any advice would be great.

  I face the same problem as well. Would like to know if there is a better way to get the text box to move with the table instead of the effect that overlap. Have to manually adjust the layout, whenever I want to get a reasonable print of a document (or export it to PDF) seems counterintuitive, especially when it causes the document seem ill-disposed on screen.

  I am running version 3.6.2 of the numbers in the case where that matters.

• Someone at - it encountered problems with the iPhone 6 if weak reception. the phone goes crazy on his own? I have two employees in the SoCal area having this problem. Both have updated to IOS 9.2 to see if that helped. Any advice would be great!

  the phone goes crazy on his own? I have two employees in the SoCal area having this problem. Both have updated to IOS 9.2 and on the Verizon network. Any advice would be great! «The phone cut, connects during a call to Conference of someone else in (the phone chooses who to call), it basically starts random on the phone stock selection as if someone is trying to use it.»  It puts not only calls on mute.  The keyboard for contacts has been absent for a while, but is now back. "That's what they live. We tried to reset hard phones, the last option that we have not yet tried is wipe it off and start over, but I don't see that as a solution, since one is nine and the other is about 6 months with the same problems accurate.

  Hello FergusonChris,

  Thank you for using communities of Apple Support.

  I understand that your business has iPhones whose screens are behaving erratically.  Given your description of the issue, it seems that the screen may be dirty or there is the screen protector/case that interferes with the screen.  To further support this issue, please see the link below.

  If the screen of your iPhone, iPad or iPod touch does not respond to touch

  Take care.

• Install Windows 8 on Windows XP. Any advice?

  I wonder on what experience others have had to install windows 8 and remove windows XP from my computer. I have an IBM IntelliStation M Pro with 2 GB of Ram, processors Intel Duel refurbed. 26 GB of space on the hard drive internal, I think to upgrade my computer at home because of the expense of buying a new computer and have to buy all the software that I'm done again.

  Windows 8 settles on old machines with problems minimum? What an experience someone had done this? Any advice?

  I want to spend more time using some programs such as Sony Vegas Movie Studio, software editing and production of video film. My machine has been able to manage this software in Windows XP SP3 without problem.

  Actxiom

  I know they will say "We couldn't get your programs to transfer through."

  You have this question in all cases.

  You can't do a straight "upgrade" from XP to Windows 8 "»  You would have to do a clean install ("custom Setup") of Windows 8, copy your data (documents, pictures, music, etc.) of a file Windows Easy Transfer or other backup offline and install all your programs from original installation media (CD/DVD/download install file).  Some older programs need new versions... which may or may not be freely available.

  Frankly, Windows 8 is a pretty big jump from an old XP system (and with a hard drive Go 86, your system is probably more than 5 years) and it is likely that you will not be able to find drivers for some of your hardware for Windows 8 and Windows 8 features do not work on your hardware at all.  Windows 8 may, indeed, works on any older hardware.

  On this page: http://windows.microsoft.com/en-us/windows-8/upgrade-to-windows-8

  If I were you - and this is based only on what I've read rather than personal experience - I would try to find a new computer with Windows 7 pre-installed (rather than Windows 8).  If you really want Windows 8, you should probably get a new computer.  Whatever it is, however, you will have the same problems of re-setup described above (it is not a direct upgrade from XP to Windows 7, either).

  PS: I wouldn't go to Best Buy, either... but it's up to you.

• NO access to 1.90 MB 2 GB Sansa M250 Player/Any advice appreciated

  Hello!

  Thank you for reading my question.

  I have a sansa m250 2 GB with reader, but when I put in there songs I can only

  access to 230 MEgabyles!. Once he reached 230 MB, I get an error message that the other songs cannot be copied.

  How can I access the partition with 190 MB?

  Before you copy and paste the pieces inside, I look in 'My computer' and click on 'no' which appears is a completely blank disc. The meter is set to MSC.

  I went from the MTP MSC several times, this caused a problem?

  Also, I reformatted the player sansa several times to address this issue. At I have accidentally delete stuff >

  Before this reformatting when I clicked on 'sansa player' in 'My Computer', there were 2 folders in the folder of the Sansa.

  When I look at the player sansa MSC in computer management it's a sound record of 1.90 GB.

  I formatted the disk by right-clicking on the drive and also via the computer management by clicking on the partition and formatting here.

  Any advice would be greatly appreciated,

  Thank you

  .

  Hi I seemed to have solved my own issued and write the fix.

  I downloaded the update from sansa and followed the instructions and it installs the software/firmware on my sansa m250.

  Then, I had access to more than 203 MB, so it's resolved.

• When I click on any icon in my control panel, a black window opens and C:WINDOWS\system32\rundll32.exe is what's wrong with the system

  When I click on any icon in my control panel, a black window opens and C:WINDOWS\system32\rundll32.exe is what's wrong with the system

  {Assuming the rundll32.exe file is not found}

  See if them can restore the file rundll32.exe:
  http://support.Microsoft.com/kb/812340 Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• 90DATK-6G96PE-MFGKOK-6OX103. I had this error on disk 1. any advice?

  90DATK-6G96PE-MFGKOK-6OX103. I had this error on disk 1. any advice?

  Hello

  It is the test of the DST with the id of failure message. This message just means that the HARD disk is dead. One option: replace the HARD drive.

  I'm sorry.