Any ideas why BrowserManager takes me to the top level domain?

Similar Questions

• Replace old hard drive with an SSD.  Nowsome keys on the keyboard no longer works.  Ex 'e' and 'b' keys no longer work?  Any idea what could take place in the disc replacement?

  Replace old hard drive with an SSD.  Now some of the keys on the keyboard stopped working.  Ex 'e' and 'b' keys no longer work?  Any idea what could take place in the disc replacement?

  Probably nothing, it's probably a fluke. Try resetting the SMC and the PRAM by iMac Intel SCM and reset the PRAM. If this does not work, try a USB keyboard to test, if it works then your original keyboard has failed and must be replaced.

• When I try to highlight text on any page why it automatically scrolls to the top? Very frustrating problem just occurred, was not there before.

  Curiously, an error just for me that was not there until tonight (I have nothing new installed on my firefox). When I try to highlight text on any page why it automatically scrolls to the top? Very frustrating problem, no matter whether on gmail on an email, facebook or a web page regular when I try to select my browser text is now scroll upward on its own literally as soon as I'm going to highlight, that means I end up selecting everything on the page when it scrolls upward. Can anyone shed some light on how I can solve this problem suddenly?

  Thank you

  I am pleased to learn that you have been able to solve your problem of Firefox.

  I reported this problem to the addon developer, in the hope that they will be able to patch the issue soon.

  Please use the Mozilla Support Forums. We hope that you will continue to sail with us.

• The short films that I do in Windows Movie Maker fail to run after about 1 minute, regardless of the format, I save in (WMV or AVI) any ideas why or what I am doing wrong?

  The short films that I do in Windows Movie Maker fail to run after about 1 minute, regardless of the format, I save in (WMV or AVI) any ideas why or what I am doing wrong?

  I'm just looking to add the opening titles to the pieces of film of aprox 3 Germans, but everytime I try and save files for uploading to Youtube, then fail shortly after a minute. The sound and picture freeze while the counter continues until the end of the file.

  am driven crazy by this so any advice would be welcome...

  Hello

  My friend John Papa - MVP - is the expert on Windows Movie Maker.

  PapaJohn.org
  http://Papajohn.org/

  PapaJohn - online tutorials
  http://www.Papajohn.org/mm2-online-tutorials.html

  Windows Movie Maker Tutorials - see the menu on the left and others on the main screen.
  http://www.windowsmoviemakers.NET/tutorials/

  Windows Live Movie Maker Forums are good sources of information:

  Windows Live Movie Maker that works on Vista and Windows 7, see the link under Windows Live Essentials.
  http://windowslivehelp.com/

  Windows Live - Movie Maker Portal - official support Site - see also the Forums of the right part of the page
  http://windowslivehelp.com/product.aspx?ProductID=5

  ====================

  These might help:

  Getting started with Windows Movie Maker

  Import video, photos and audio on Windows Movie Maker

  Import video from a videotape

  Get a movie in Windows Movie Maker

  Make a movie quickly in Windows Movie Maker (AutoMovie)

  Publish a movie in Windows Movie Maker

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I updated to windows 10 and installed items 14 64 bit.and is set by default to open .jpg files. When I click on an element of the photo opens but the photo is not. Then I have to open it manually. Any ideas why and how to sort gratefully receiving

  I have updated to 10 Windows and installed the 14 64-bit elements and makes it the default program for opening .jpg files. When I click on an element of the photo opens but the photo is not. Then I have to open it manually. Any ideas why and how do the sorting gratefully received

  Sort problem! I need the Adobe folder and use the Adobe Photoshop elements 14 .exe 'association' as my default file

• some images (JPEG format) do not show in Design view, but show in live mode, any ideas why? Thank you

  some images (JPEG format) do not show in Design view, but show in live mode, any ideas why? Thank you

  Work within a site defined in DW?

  All images cropped and size?

  Are all the images for the Web as optimized JPG?

  All images are saved in your folder of Site Local DW?

  Nancy O.

• I've recently upgraded to El Capitan - biggest problem is timing removed all the entries in my previous ical. Any ideas how I can track down the file containing these essential documents and install in the new program?

  I've recently upgraded to El Capitan - biggest problem is timing removed all the entries in my previous ical. Any ideas how I can track down the file containing these essential documents and install in the new program?

  All calendars are enabled in the sidebar?

• Any ideas how to get rid of the rose?

  I just signed up for the first time today and everything on my screen that should be white is pink. I know that the monitor support always white because when I first connect there is a small screen which lights up and that switches from analog to digital and it is bright white. Any ideas how to get rid of the rose? Tried to DISPLAY on the control panel and could not fix. Thanks, people.

  Hi rutherford nbr 1.
   
  -Did you of recent changes made to your computer before this problem?
   
  Make sure that the monitor cable is correctly connected. In addition, if you have another computer, the same connect to your computer to confirm that the issue is not because of the screen.
   
  Make sure that there is no electric devices with magnets next to your screen.
   
  Follow these steps and check if it helps fix the problem.
   
  a. Click START and select control PANEL.
  b. Select and click VIEW.
  c. Select SETTINGS on the Interface of the screen and then ADVANCED.
  d. on the advance Interface, choose COLOR MANAGEMENT tab.
  e. on Interface, click on add color management. You will see a list of color profiles.
  f. choose the most appropriate to the brand of the screen / graphics card. You can choose several color profile and a default setting.
   
  For more information, see:
  Overview of display properties
  To change the number of colors displayed on a monitor

• Someone has created a website for my business before I joined 5 weeks ago. We do not have a lot of information about how they did it! I know it's good Muse - any ideas on how to get into the back-office to do this editing?

  Someone has created a website for my business before I joined 5 weeks ago. We do not have a lot of information about how they did it! I know it's good Muse - any ideas on how to get into the back-office to do this editing?

  You would need to Muse and the original file of Muse. There is no 'back-office' on Muse like WordPress or Joomla sites! If that's what you're looking for.

• Reinstalled dreamwever cc and now my extensions are not displayed. Any ideas? PS when I open the extensions manager that they are there

  Reinstalled dreamwever cc and now my extensions are not displayed. Any ideas? PS when I open the extensions manager that they are there

  Hi the solution was that I had to reinstall all extensions, then they came. Thank you

  Sincerely

  Dennis Handa

  DHManagement and PR

  www.agentezsite.com

  www.businessezsite.com

  www.flarren.com

  www.keysluxuryliving.com

  321-956-4003.

  2601 Reed Avenue

  Melbourne, Fl 32901

• Subgroup of experts can pass events to the top-level event loop?

  I'm working on a VI that may have up to 1000 controls (Yes, she really need that much).  To reduce the size of the user interface and increase the modularity of code, I partitioned design into subgroups that are loaded in tabs.

  Subgroups are responsible for:

  "VI reference to open"--> "invokes the method: Run VI '--> ' invoke the method: Insert VI»

  (Sorry, I don't know how to incorporate images here, yet)

  The upper level has some of its own controls in addition to the case of the Sub-group of experts, and it will be built on the design of producer-consumer model.  The loop of consumer manages the interaction with the hardware (write-only).  Each sub-group of experts will also have its own event loop to manage coordination of the user interface within the Sub-group of experts and also a preprocessing of data that results from the activity of the user within the Sub-group of experts.

  Here's the problem: go in the subgroup of experts, how do I pass an event up to the top-level event loop so that the hardware access request can be entered into the queue of the consumer?

  At first it seems I could solve this problem in two ways:

  (1) rather than to use an Invoke node to insert the Sub-group of experts, is it possible to connect the frame of the Sub-group of experts against a VI that is instantiated in the block diagram?   If there is, I can simply use dataflow to bring jury secondary to the upper level events.   But for now, it seems there is no way to have a subgroup of experts except by using the Invoke node.

  2) there is another way, that we have found, but this is an ugly hack. The reference to the 'Open VI' VI using, I use ' call method: control value: Get.  Gives me the value of a control in the Sub-group of experts, but there is no case of signaling, so I have to resort to polling stations, which slows down the user interface and breaks the model "Event Loop".

  Y at - it of other ideas for how to get events from the Panel under treaty to the next level?

  (of course, this isn't * all * the events we manage.)  The Sub-group of experts will actually a pre-treatment and then send only the selected events to the highest level user-defined)

  Thank you and best regards,

  J.

  I have not used the secondary method before, so I can't save what I think with real experience.

  But,

  If the Subvi who is put in a secondary control on front panel for a queue reference, I think you'd be able to do the Invoke node to set the reference queue control before calling the functioning of the VI.

  The other idea would be do not to have a reference of queue control to pass.  But use named queues and leave the Subvi in high school to create its own queue reference based on the same name that was created in the main VI.  When it ends, it could destroy its unique queue reference and not to force a destroy all and reference to the queue in the main VI would still be a queue works valid waiting for an another sub - VI at the secondary level to generate his reference to the same queue and sends the data in.

• Find a specific sublayer and pass to the top-level layer

  I have a lot of illustrator files which are organized by a model size. The layers are configured so that the top-level layer is always model. However the underlayment I need to pass to the next level could be called 42 border Pg or 30 border Pg or Pg 24 border.

  Y at - it a way for a script to search through the layers and if it finds '42 Pg border' or 'border Pg 30' or "24 Pg border" in the base layer model it it would move to the top level, but if he does not see an of these he does not give an error?

  I'm still new to scripting so the extent of my knowledge on this is to scan all the layers and unlock them. Then, find a specific layer name. This is the base layer and moving it to the next level that I'm not sure.

  Here is my current code:

  var doc = app.activeDocument;
  var allLayers = doc.layers;
  for (var i = allLayers.length-1; i >= 0; i--){
      allLayers[i].locked = false;
      if (allLayers[i].name == "42 Pg Border" || allLayers[i].name == "30 Pg Border" || allLayers[i].name == "24 Pg Border") {
          alert("I found the " + allLayers[i].name + " layer")
      } else {
          alert("Not the right layer")
      }
  }
  

  Any help would be greatly appreciated!

  I'm using CS4 on a PC running Windows 64 Bit with JavaScript

  This gives a shot.

  its still very early and my brain completely does not work yet.

  bring all the layers in the beginning (May) will ruin the stacking order much.

  var doc = app.activeDocument;
  var allLayers = doc.layers;       
  
  for (var i = allLayers.length-1; i >= 0; i--){
    allLayers[i].locked = false;
    deeper(allLayers[i]);
  }    
  
  function deeper(parent){
  var subLayers = parent.layers;
    if (subLayers.length > 0){
    for (var i = subLayers.length-1; i >= 0; i--){
    subLayers[i].locked = false;
    deeper(subLayers[i]);
    if ((subLayers[i].name).substr(-6) == "Border") {
       subLayers[i].move(allLayers[0],ElementPlacement.PLACEBEFORE);
    }
    }
    }
  }
  

• OBIEE BI answers: measures bad aggregation at the top level of the hierarchy

  Hi all,
  I have the following problem. I hope to be clear in my English because it is somewhat complicated to explain.
  
  I did following:
  
  ID of drugs classified in quantity
  1 9
  2 4
  1 3
  2 2
  
  and drugs following table:
  
  Drug brand Id brand Description drug whose active ingredient Id drug whose active principle Description
  Aulin Nimesulide 1 1
  2 Asprina 2 Acetilsalicilico
  
  In AWM, I've defined a Dimension of drugs based on the following hierarchy: drug whose active ingredient (parent) - brand name of medication (sheet) mapped as Description:
  
  The active ingredient of drug = drug Active ingredient Id of my Table of drugs (pharmaceutical = Description of the active ingredient LONG DESCRIPTION attribute)
  Pharmaceutical brand Description = drug brand Id of my drugs Table (LONG DESCRIPTION = Description of drug brand attribute)
  
  Indeed, in my cube, I have traced pharmaceutical leaf-level brand Description = Id of the drug of my fact table. In AWM drugs Dimension is mapped as Sum aggregation operator
  
  If I select on answers drug whose active ingredient (parent of my hierarchy) and the quantity, in my view, after the result
  
  Description of the active ingredient drugs classified in quantity
  Acetilsalicilico 24
  Nimesulide 12
  
  indeed of the correct values
  
  Description of the active ingredient drugs classified in quantity
  Acetilsalicilico 12
  Nimesulide 6
  
  EXACTLY the double! But if I dig drug Description of the active ingredient Acetilsalicilico I can't see correctly:
  
  Drug whose active ingredient Description pharmaceutical brand classified in quantity Description
  Acetilsalicilico
  -12 Aspirina
  Total 12
  
  Aggregation of evil is only at the top level of the hierarchy. The aggregation on the lower level of the hierarchy is correct. Perhaps the answers also amount Total line? Why?
  
  I'm frustrated. I ask your help, please!
  
  Giancarlo

  OK your on 10G but the view of the cube and the obligation to limit the levels in the LTS in the RPD is valid in both.
  I think we found the problem,
  Go to each source logical table this logic table (x 2 in your case you have two levels) and on the content tab, window background ' use this "Clause Where" filter to limit the rows returned. »
  Open the expression builder, locate LEVEL_NAME according to your cube and limit accordingly, it is to say LEVEL_NAME = "BRAND_DESCRTIPION" for the aggregation BRAND_DESCRIPTION LTS and LEVEL_NAME = "XXXX" in detail, SFF, where XXXX is the name of level of hierarchy in your cube for details (leaves) records.

  Can you try that and let us know?
  Thank you
  Alastair

• Remove the top bar in the top-level navigation page

  Hello

  Is it possible to disable the top with Burger icon bar in the top-level navigation page and make it appear only served as in the articles? I thought that it was an option, but I can't seem to find anywhere in the dashboard or in tutorials.

  Thank you!

  Hi Jenn,

  There is no option to remove it when you're on a navigation page.

  Neil

• Find the top level of a VM folder

  I want to find the name of the top-level folder that contains a virtual machine in a data center and looking for the root tree.

  For example \\datacenter\folder1\folder2\folder3\TestVM

  I try to find as a parameter of the TestVM folder1.

  I need to sort all the VM in our sphere of their top-level folder

  In all cases to do this would be appreciated.

  Also it would be quite in powercli with scripts

  Try something like this

  $vm = Get-VM -Name TestVM$object = $vm.ExtensionData$parent = Get-View $object.Parent
  
  while($parent -is [VMware.Vim.Folder] -and $parent.Name -ne "vm"){    $object = $parent    $parent = Get-View $object.Parent}$object | Select @{N="VM";E={$vm.Name}},    @{N="Top Folder";E={$object.Name}}