Any program starts with Ulead

Similar Questions

• Programs start with Windows Explorer does not start at startup

  Original title: startup program does not

  Hi all.. all my startup program works do not when windows start even the file system as windows explore and managger the office window, I have to do new task and do their job I mean anything to work when I get black screen on startup of windows. and I think that this has happened when I use this help closing s t .plzzzzzzzzz congratulate 3600 me :(

  Hello

  You did changes to the computer before the show?

  Method 1: Safe Mode and clean boot

  Check if the problem persists in safe mode. If the problem persists not in safe mode and check if the problem persists in the boot.

  Step 1: Safe Mode

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  See the following site:

  Start your computer in safe mode

  http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode.

  Step 2: Clean boot

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  Check out the link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.microsoft.com/kb/929135.

  Note: once you are done with the boot, follow step 7 of article to reset your computer to normal startup.

  Note: If in case you are connected through a wireless connection and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check see topic wireless are turned on (Enabled).

  Method 2: Perform a virus scan by using the Microsoft Safety Scanner

  Analyze the computer to remove all possible malicious content.

  See the following site:

  Microsoft safety scanner

  http://www.microsoft.com/security/scanner/en-us/default.aspx.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 3: Auditor of the filesystem (SFC) Scan

  SFC scan will find all missing or incorrect system files and repairs them.

  See the site:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• I can't open any programs downloaded with firefox

  I am running windows 7 premium and latest Firefox. After downloading a program, I go to the download folder, but can't open the program.

  Right-click to download and use Open the containing folder.

• When I press on my windows logo key, he stresses that the programs starting with that letter why?

  I wanted to hang my computer, so I press the L and windows logo key, I expect to lock, but instead, he stressed "Left 4 Dead 2.exe" so I press it again, now, it highlights 'Small Inferno.exe' why? (in addition, no other keyboard shortcuts too much work as Windows + R logo or even just the logo key Windows to open the menu start!)

  If it helps, my keyboard is an Alienware TactX keyboard, and it worked normally for about a year now! Ask me for anything that will help to solve this annoying problem!

  Thank you

  There is a 'Game' switch on the Alienware TactX keyboard that disables the key features of Windows among other things. This 'Game' switch could be just above the keys F3/F4 but check the documentation of your own keyboard if you can't find it.

• I can't read the .avi files with any program on my system.

  I can't read the .avi files with any program on my system. Have several programs that all of them played before September 2010, like the classic, windows media center windows media player media player, Director of windows, windows, 5.3, video programs video ulead dvd creating toshiba. Nothing works, frustrating not being able to download videos from two different cameras and burn them on DVD. I get an error of almost all the programs, saying that it was unable to load the required component, but I can't determine what this component. I tried to reinstall the codecs again non-joy.

  The free utility GSpot to identify the codec that created
  a .avi file... maybe it will help solve the problem:

  Download GSpot
  http://www.free-codecs.com/download/GSpot.htm
  (left-click the text: "Download GSpot")
  (on the next screen...
  left click: 'Download [GSpot 2.70]')

  You don't have to install it... just unzip the file and
  GSpot.exe left click to launch.

  GSpot Super quick start
  http://www.headbands.com/GSpot/v26x/Quick_Start.html

  Evaluation of video files and Codecs with GSpot
  http://www.windowsmoviemakers.NET/PapaJohn/68/GSpot.aspx

  Good luck.

• Problem of the intranet: "Firefox doesn't know how to open this address, because the Protocol (k) is not associated with any program."

  Creation of an intranet to a collection of security videos and am linking to a video through a picture icon in the form of:
  < a href = "K: \'link to the movie" > ""
  < /a >

  Overview on the works of IE9, the movie starts when the splash screen is clicked, but in Firefox, I get the alert "Firefox doesn't know how to open this address, because the Protocol (k) is not associated with any program."

  InterLan VLC is the video player by default on the PC. I don't want to put video controls anywhere in the page.

  I code for XHTML 1.1 strict with CSS 2.1, and Firefox 5 handles all of my eccentric styles while IE9 has a few issues, while Firefox is my browser of choice.

  Looking at my Options in Firefox, 'File Windows Media audio/video' is configured to use VLC.exe, so I'm always looking to solve this problem.

  Any Suggestions?

  You must use the Protocol file:// (file:///k:/link_to_movie).
  Easier to see the links to use are to open a file via file > open a file

  • http://KB.mozillazine.org/Links_to_local_pages_do_not_work

• Results of the selection of the files or programs of the office or start menu in view this file does not have a program associated with it for performing this action.

  I am running Windows XP.  My deleted security a software threatens malware a few days before and since any file or program I select in the desktop, start menu or results of the status bar in a notice that "this file doesn't have a program associated with it for performing this action.  Create an association in the folder options panel.  Nothing I've tried has worked!  Help!

  Run the EXE File Association Fix http://www.dougknox.com/xp/file_assoc.htm
  You probably also need to run the LNK (shortcut) file Association problem from the same site.

  Be sure to read the instructions at the top of the page.

• When I try to start my computer, it does not load anything. The backlog, but the rest of it runs bad and slow. I can't open any programs that either, and my pointer always told it to load.

  Original title: Please HELP

  When I try to start my computer, it does not load anything. The backlog, but the rest of it runs bad and slow. I can't open any programs that either, and my pointer always told it to load. Safe mode works, but I just don't know what to do. Help, please

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Since it works fine in safe mode, I suggest you to try to perform the clean boot to safe mode and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  Method 2:
  Also, try to run the safe mode System File Checker and check if it helps:
  http://support.Microsoft.com/kb/929833

  Method 3:

  Be sure to run a full scan with your antivirus software.

  http://www.Microsoft.com/security/default.aspx

  It will be useful.

• Cannot start programs - OPEN WITH missing function

  A few days ago, I tried to download and install a chess in Chessbase engine, a database utility. I did not. I remember at one point a flashing horizontal line in the upper left corner of a window black arise at a time, so that illuminates what could have transpired. Basically, I tried to get out without making any damage, but it was not to be the case. Immediately after that, I noticed that many programs Office now had ChessBase icons instead of those who were there previously. In addition, whenever I would try to run any program, including Firefox, Word, etc. it would immediately launch the basic chess program. I did some reading, tinkered around (oops) and restored the original icons for the desktop, but not their original function.

  I am more able to launch ANY program installed (MS WORD 97, for example) by using the OPEN WITH option, that has completely disappeared. I am not able to access the recovery files via the control panel because when I select "Open system restore", the error message in the recovery area States that "System Restore could not be opened."

  When I followed the trail into a .exe file (for MS Word, for example), I can't open it. I tried following some tips on a couple of occasions involving typing in commands in the search box (for example, regedit.exe) but never, it opens the file automatically, or makes a double click. Needless to say (but I say that! LOL) right-click to access the OPEN WITH feature is never an option, because it no longer exists in the menu!

  I use a method 'diverted' to access the internet (start-> all programs-> CCleaner (folder)-> CCleaner Homepage. This puts me in the Firefox browser online where I can ask for help. Help! (LOL)

  Try to start the restoration of the system of the box executer run from the start menu, type rstrui.exe in the box.  If it does not try to run it from a safe secure with command prompt with the same control rstrui.exe.

  John

• How I can corect the following protocols (rtsp) is not associated with any program or is not allowed in this context

  The address was not included

  Firefox doesn't know how to open this address, because one of the following protocols (rtsp) is not associated with any program or is not allowed in this context.

     You might need to install other software to open this address.
  

  I'm not a Curmudgeon, so please keep it simple.

  Thank you

  Firefox 32.0.3 has this security update.
  You can check the version in "> about".

• I try to get Firefox to open Vuze when I click on a magnet link, I get the following message: Firefox doesn't know how to open this address, because the Protocol (loving) is not associated with any program. tell me the solution

  When I try to open a torrent using magnet, I get the following message. Firefox doesn't know how to open this address because the Protocol (loving) is not binding to any program.

  I had this problem and just reinstalled Firefox. Problem solved. In my case, I believe that it is through the installation of FlashGet. Although I uninstalled FlashGet, it had outstripped the Magnet links / Protocol. I hope this helps you with your instance. Fortunately, I had Setup for my version of Firefox (7.0.1) registered and used that but you might need to search for your current version or install a later version

• The tab "Getting started with Mozilla Firefox" (as well as my default homepage on another tab) charge whenever I start Firefox. How can I stop this tab open at the start of the program?

  The tab "Getting started with Mozilla Firefox" (as well as my default homepage on another tab) charge whenever I start Firefox. How can I stop this tab open at the start of the program?

  If the above did not help, then also see the following articles for more suggestions:

  • https://support.Mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
  • http://KB.mozillazine.org/Preferences_not_saved

• [Solved] Message "Firefox can't open this address, because the Protocol (icyx) is not associated with any program. icyx://stream-16.streamsolutions.co.UK:9102

  Hello
  Firefox doesn't know how to open this address because the Protocol
  (icyx) is not associated with any program.
  This happens when I open a radio station - lmradio.net / and then try to
  play with my Windows media player. All of a sudden, it happened that I had no problem before yesterday.
  My OS is Windows 7 Pro.
  Concerning
  David Rennie

  You install the Orban/Coding Technologies AAC/HE-AAC Player plugin.

  This solves the problem.

• I have updated and now when I try to log on to Web sites with fingerprint reader, I get "Firefox doesn't know how to open this address, because the Protocol (dpql) is not associated with any program."

  I have updated and now when I try to log on to Web sites with fingerprint reader, I get "Firefox doesn't know how to open this address, because the Protocol (dpql) is not associated with any program."

  What is the Digital Persona fingerprint scanner? If it's that they have abandoned, for more details, see https://support.mozilla.com/en-US/questions/799388

• Impossible to download music - error message reads "Firefox doesn't know how to open this address, because the Protocol (wmms) is not associated with any program."

  I bought a song to download from Wal - Mart.com and received the error message when I tried to download the song. "Firefox doesn't know how to open this address, because the Protocol (wmms) is not associated with any program." I've never had a problem before. I paid for this download & even I can't access it.

  The site of Wal-Mart offer a plugin or program (Walmart MP3 music downloads) to manage this Protocol?

  See:

  • http://MP3.Walmart.com/store/help/help.htm
  • http://MP3.Walmart.com/store/help/downloading.htm

  On a protocol must be enrolled in a program for Windows that supports this Protocol.

  See also http://kb.mozillazine.org/Register_protocol