Any visible change on 2.6 BIOS - Satellite A200-1If

Similar Questions

• Is it possible to change the VGA of a Satellite A200?

  Is it possible to change or upgrade the graphics card/chip by the Satellite A200?

  Hello

  No, it s not possible. It's a laptop and not office, so the piece of card/VGA-is soldered on the motherboard of the machine and cannot be modified or replaced.

  Welcome them

• How to remove the password of BIOS - Satellite A200 PSAE0E

  I have a Toshiba laptop Satellite A200 PSAE0E
  I want to erase the bios password. I lost the cmos password,

  I can not boot my laptop

  Thank you

  Bad news Buddy :(

  The unknown BIOS password can be removed by Toshiba approved maintainer!

  Another way is not possible!

  To contact the ASP in your country. Explain your story and wait for the help!

  Good luck

• Satellite A200-1If does not start after the BIOS update

  Hello

  It is my first time on the forum posting, I hope someone can help me.
  I recently downloaded the latest update of the Bios (bios - 20090121132526.zip) for my laptop. I ran the bios Setup, after the update it restarted my laptop, but then he went to a black screen and no longer start.
  When I press the power button only power led lights, fans begin to turn and the DVD - rom turns and stops and the screen is blank.
  I am running Vista Home premium 32-bit.

  Can anyone provide a solution on what I can do to fix this?

  Was the system standby standby/extended/recovery?

  Its important to cold starts of the system before and after an update of the BIOS.

  You could try to remove one of the modules RAM (change RAM size) and turn on, otherwise the system may need to be sent to an ASP for repair.

• After Vista x 64 BIOS update the BIOS Satellite A200 password - 1 KB PSAE6 queries

  Well, I used the update to the BIOS listed in the updated drivers/bios Toshiba Web site on Windows vista x 64 and of course I used the executable x 64.
  Strangely, when I reboot it, he asks a bios password that I never inserted. So I guess that update automatically inserted a password. Now I can't boot from any device so I can not use the laptop.

  What you have to say about this?

  Hello MC

  You founded some answers? Nobody offered here real explanation which can be wrong there. Perhaps have you contacted partner authorized in your country. They are in touch with Toshiba and I'm sure they can help you about this.

  If you find something about this password problem please let us know.

• Satellite A200-1If wifi intel 3945 change to intel 4965

  Is it possible to change the 3945 old Intel Wi - Fi in more recent with the support of N 4965? There will be problems of performance or something?

  Thank you

  Hello

  I'm not very well if it would be possible to m because as I m wrong not the new N WLan 802.11 standard needs a different antenna.

  So in your case I would not replace the internal WiFi card, but if you want to use a 802.11Draft - N, to consult a few external WLan PC card external opportunities IE.

  See you soon

• Satellite A200-1If - BIOS (RTC) battery this time need

  Someone at - it a the bios battery (RTC) spare parts for this motherboard. I just talked to Toshiba - who told me to talk to "Topaz", who told

  "It is part of the motherboard, and we cannot get hold of the components to the motherboard. A new motherboard will cost £160. This is the best we can do '

  The battery would cost no more than £3.
  Anyone got a please?

  Hello

  Maybe it s enough if the RTC battery is charged?
  You can charge the battery in the machine for several hours.

  Here's an interesting document on this subject:
  http://APS2.toshiba-tro.de/KB0/TSB6301FE000DR01.htm

• Satellite A200-1If - drive external HARD after a while is "unknown device".

  Hello!

  I have such a problem: I work with my external case alu Toshiba 3.5 HDD 500 GB and after awhile of copy of the files in the laptop it disappears and appears this luckily device recognized.
  Can it be caused by not enough power in the USB port?

  THX for any help or the workaround

  Hello

  Yes, this may be caused by the fact, there is not enough power provided by the USB port. first of all, note that external USB hard drives 3.5 inches are generally designed to be used with systems of office due to their higher power needs (this is also the reason that many need an external power supply of their own). my suggestion would be to buy a 2.5 inch drive external hard USB is designed to be used with laptops. Another reason that the hard drive may disappear when copying files, is that there may be a problem with the connection of the USB cable between the laptop and the external HARD drive. I suggest to check that both ends are connected properly and not put any pressure on the cables and keep them stable.

  I hope this helps you with your question

• For Satellite A200-1If spare parts

  Can someone tell me where I could get a Ribbon replacement for the touchpad for this model?

  The P/N is NBX00004G00.

  Any help would be appreciated.

  Concerning

  Tim

  Hello Tim

  You have the order number and all you need to do is use Google.
  Who knows where you live and where to order this part.

  Check on Google for your country and I am sure that you will find.
  On eBay, you can find also many spare parts for the different laptop models.
  Last solution is the Toshiba service provider in your country. They can control every part of your laptop model.

• 2.60 BIOS does not work on the Satellite A200 - 22 c

  Hi all

  I made the mistake to Flash my old bios Satellite A200 - 22 c (PSAE6E) to the new version 2.60.

  As I did this, the keyboard does not work on the bios screen, so I am unable to manage anything in the BIOS.

  When Windows Vista 32B starts the first time, the keyboard does not work. If I close the session and then I it again, it works correctly.

  The touchpad is lost and I need to use a USB mouse. Is not a pilot cause problem, all the drivers are updated and are working properly.

  The question is: why Toshiba didn't allow users to download the old version of the BIOS? ¿WHERE or who do I contact to get the original BIOS? Why do the flashing utility make a backup of the OLD BIOS and then does not give you the ability to recover it?

  Please, help me to recover the original BIOS to retrieve my keyboard and my touchpad because I can´t find any message or anything like that to get in touch with the technical support of this web site.

  Thank you!

  Which version was old BIOS?

  By the way: you can contact Toshiba. They have access to the Archives of BIOS and they can provide you with older version of BIOS.

• Satellite A200 PSAF0A - cannot use the DVD writer / reader more

  Hello
  Anyone has any advice on this?

  Laptop: Satellite A200, PSAF0A
  Require: DVD burner / player sofware.

  My hard drive died last week, so a techno guy installed a new and reinstalled the OS (Vista)... everything works fine. But don't have Toshiba Utilities for the use of the DVD burner / player more. Where is it? I downloaded the player to DVD from Toshiba, but it does not work. It doesn't do anything. Media player plays sound but no video.

  The software that I used to play DVDs accompanying the package when I bought it; InterVideo WinDVD I remember well.
  I downloadeded V 8, but it does not work either. I need Codecs etc, right?

  Looked at Toshiba Europe site for the DVD player, but I think it's the same DVD s/w that I have already downloaded.
  But there is no download of my model, PSAF0A (Satellite A200) in all cases.

  I do not have the CD - they are comfortable in another country! (Unless, of course, my nephew is using them as a frisbee that could well be the case). Help!

  It seems that Toshiba do not publish the DVD software on the site... maybe its due to the issues of the region / license?

  Try AVS DVD Player (its free).
  If you need a MPEG2 codec, install ffdshow

  The two are in http://www.free-codecs.com

• Cannot change the HARD disk parameters in the Bios on Satellite A200

  I can't change the hard disk parameters in the bios for my satellite A200-1The
  This bios does not support changing the parameters of the hard disk for example SATA to IDE?
  BIOS version is: 5.6

  AFAIK in BOS advanced settings you can change mode SATA controller only. You can use the AHCI mode or compatibility.

  I put t understand why do you think you can use IDE mode. What you want to do exactly?

• Satellite A200-PSAE6E: what changed in the Bios 2.40 Vista 32bits

  Can someone tell me the release notes for the new Satellite A200 PSAE6E BIOS 2.40?
  In fact, the Toshiba never release notes on their BIOS updates.

  Unfortunately, I didn't find all the details on the changes to the BIOS on Toshiba European pages.
  I found a log file BIOS on the site Web of Toshiba us but Satellite A200-PSAE6E is a European model and I doubt that the news of the Toshiba page relates us to the A200 models.

• Satellite A200 - 1 M 8: Bios Update 2.20 - the supervisor password has changed

  Hello!

  Satellite A200 - 1 M 8. Update the BIOS changed the supervisor password. Has been bb_aa_yy.
  If I can set this password has become?
  Details: Updated from Vista to Vista SP1. After that the hardware configuration utility does not work.

  Latest versions of the hardware configuration utility, supervisor password and some other are not installed.

  The usual message - the serial number is not valid.

  Hello

  Maybe the problem has something to do with hardware utilitly. So it doesn´t doing is even better when the error message "is the serial number invalid.", but it could be the solution to this problem.

  I suggest you to check these discussions which might help you:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=31711&TSTART=0

  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=100197

  If this works, you should be able to install the utiltly equipment and solve your problems...

  Welcome them

• Satellite A200 - change in BIOS, so installing XP after Vista

  Hello!

  I have a Satellite A200-1SM and I would like to install an os win XP (for the moment, I'm working with Vista and the latest BIOS for this system). Do I have to Flash the BIOS of my motherboard or this step is simply an option that I don't have to do it because XP works fine without him?

  Thx for the help :).

  Hello

  The number of threads here on this forum, you will find discussions on this subject.

  You can use Windows XP Home edition on your laptop without the BIOS upgrade, but you will not have the full support of WXP. This means that you probably won't be able to use all the features of FN keys. If you want to have the full functionality of Windows XP Home edition, you must upgrade the BIOS to version 5.20, I think. Find out on the Toshiba BIOS download page.