Any way to put the right WebHelp navigation pane?

Similar Questions

• Any way to change the screen, keyboard split in OS9.2 version? I hate it

  Any way to change the screen, keyboard split in OS9.2 version? I hate it

  Split keyboard is purely optional. You probably activated by accident.

  Settings > general > keyboard > turn off the keyboard Split option, so it does not happen.

• Is in any way to 'force' the NB of 550 to 1024 x 768 resolution

  Hello

  Is any way to 'force' the resolution on the NB of 550 to 1024 x 768, Winbdows 8 can take place on this issue? There are some hacks around other netbooks, but I couldn't find anything for the netbook from Toshiba.

  Hello

  In my opinion this is not possible because the internal LCD display supports a maximum resolution of 1024 x 600
  This isn't a matter of driver graphics card or software but it s a hardware limitation of the display internal.

• Whenever I open iphoto 09 (8.1.2), it makes advertising ilife 11. However I can't find any way to do the upgrade.

  Everytime I open iphoto 09 (8.1.2), he announced the upgrade to ilife 11. However I can't find any way to do the upgrade. I don't think that this computer can handle the upgrade to yosemit and photos. I'm operating a white macbook memory 1.5 GB with osX 10.7.5. IPhoto has apparently been abandoned for the photo. But where does that leave us with older equipment?

  If you don't want to or cannot run El Capitan on your Mac, buy a DVD of iLife 11 from a source like Amazon or eBay.

  (140098)

• I tried for AN HOUR to find a way to put the two different fonts on the same line

  Pages is crap. I tried for AN HOUR to find a way to put the two fonts on the same line, even if I highlight 1 WORD, the whole line changes (if you know how to do that please tell me, I'll me CRAZY!). Wouldn't recommend, that Word is 100 x better and easier to use

  < published by host >

  Hi varn,.

  Seems to work here (Pages of screen capture):

  

  Select (highlight) the text you want to change. Click on the Format brush, and then click Style. Choose the font you want to use.

  The example above is in the text layer. I also tried in a text box and a table cell.

  I also tried to change the font for a single word of a line of text in Pages for iOS. The police has changed to the selected word, while the rest of the line remained in the police, he had previously.

  Cannot test it in 5 Pages, because I have not installed. The above example is Pages ' 09.

  It is possible that you have applied to a paragraph Style, what would change everything in the paragraph containing the insertion point.

  Kind regards

  Barry

  PS: MS Word is available for OS X, if you feel the need to switch.

  B

• Any way to stop the shuffle mode in iTunes from the iPhone 5?

  Any way to stop the shuffle mode in iTunes from the iPhone 5?

  If you listen to a single artist, or whatever song you can listen, bring this song to full screen, so you can see all the controls. At the bottom of the page, to the left side, you will see two icons that contain arrows. The first has the crossed arrows, and the second shows their type of verse in a circle. If you press them, then get highlighted, which means they are on. Shuffle is the first left, and then repeat is the second. Tap it to make sure it is off (not highlight).

• The screen of my computer no longer turns. It is supposed to run it any way, I flip the screen, I can not understand how to solve this problem

  The screen of my computer no longer turns. It is supposed to run it any way, I flip the screen, I can not understand how to solve this problem. I guess a child (best case scenario) or my husband (worst case) have been involved in this. But it drives me crazy. Any ideas on how to get that back in action?

  Hello

  What is the brand and model of the computer?

  Were there recent changes made on the computer before the show?

  This issue could be due to corrupted graphics cards drivers. I suggest you to update the latest version of the drivers of graphics from the manufacturer's Web site and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-8/get-best-display-monitor

  Thank you.

• I tried exporting a PDF score in word format, but it seems incomplete. Is there any way to export the music score PDF to word correctly?

  I tried exporting a PDF score in word format, but it seems incomplete. Is there any way to export the music score PDF to word correctly?

  Very, very unlikely, unless you export each page in the form of a simple graph, slats, words and everything. You ask too much, especially given that Word is not a music creation application.

• Any way to rotate the images in the new mobile app?

  Any way to rotate the images in the new mobile app?

  Hey Keenan,

  Sorry we do not have this feature yet, but we're working on some really cool things for our next release. One way you could rotate your images open your media in QuickTime player, turn it then re - import into Clip. Not the prettiest workflow, but it does not work.

  Best,

  Peter Garaway

• RH8, using AIR - any way to increase the filling in the right pane?

  Hi all

  My client wants to try the help format of the AIR for the next version of their product. Currently, they distribute as a. chm. The only annoying problem that I run in after the upgrade to RH8 and build using AIR is that when the topics appear in the right pane, there is not enough space (padding) on the left side. The text is jammed against the bar of division between the left and right panes. This isn't a problem if I compile as a. chm.

  I use a template (template) for all subjects, and although I tried to adjust the left margin workaround, the existing rubrics do not pick up this change (even though I place temporarily allows them to use a different master page and then come back). Other solutions or workarounds are appreciated!

  Thank you

  Katie

  Katie Carver

  Senior technical editor

  Doc-to-You, LLC

  Phoenix, AZ

  Hi Katie,

  Master page use css file to select all styles. You must change the BODY style and add the left margin.

  

  I have attached a picture of changing the css file where I add indentation left in the body.

  Hope this will help you.

  Praful-

• Any way to unlock the application of JOINT?

  Seal has a free app Amazon the day where I downloaded a few days ago. I really don't think that I installed it! However, the next thing I know, it has been installed and for many functions of Xoom, it wants me to draw a pattern in the points such as the splash screen. My normal startup model isn't knit and after I put in the wrong point fancy a few times, he asked for my "favorite Vegas game. I tried to respond to the Vegas games that I know (my true favorite is Ski-Ball, what is yours?), but none of them worked. It allows me to do as long as I have the patience, that is to say not much longer.

  I can still run applications that were on my Xoom before this debacle, but none of the applications that were installed after him. In addition, the parameters and Android Assistant are blocked. A bit boring.

  So, assuming that you believe me that it is my Xoom and not something that fell on a truck, is there a way to delete the entire application? Or am I stuck with making a sort of reset which will erase everything? And how would I do that, anyway?

  Thanks for any help!

  babyxoomer

  I installed this app and works a lot to block access of my grandchildren, my apps shortlisted to open the set-up of Seal.

  At some point, you or any other user of your Xoom must have select a reason for joint to install. You have somebody else using your Xoom?

  Poko

  Published by: Poko... have you tried to uninstall this application yet?

• Any way to disable the cache Orchestrator?

  Hello everyone,

  We are faced with a few inconsistencies while working with workflows and vcloud Director web console at the same time, especially when you have to choose the entries at the beginning of the workflow.

  Any chance to disable the cache?

  Thank you

  Luciano

  What version of the plugin vCloud do you use? 1.5 or 5.1?

  There is no way to turn it off, but in 5.1, you can change the time-out period. If you put a short that you will get close to real time, but then he may have a performance impact.

  Christophe.

• Any way to recognize the power of Dell provides that are not standard?

  I have a fleeting memory that, several years earlier, supplies Dell used a different pinout than standard ATX power supplies and hang one up to another motherboard of brand or by using a different power supply with a Dell didn't matched no joy.  I am putting back nine of some old Dells I recorded and I was wondering if someone could give me guidance as to which machines different power supplies were, when they were a way to recognize the eccentrics, nothing.

  Thanks in advance for any help.

  Specifically 200W PSU 9228C DELL reference NUMBER

  No idea what the part Small Form Factor number so if it came from one of the models below its not useful and is not EPS12v so it has a connector 20 pins not 24.

  DPN 9228C supports the following Dell models:

  Dimension 4100, Dimension 4100, DT, Dimension 4100, MT and Dimension LXXXc MMT, Dimension V___ Dimension V___C Dimension VXXX MDT, Dimension VXXX MT, Dimension XPS BXXXR MDT, Dimension XPS BXXXR MT, Dimension XPS R, Dimension XPS TXXX MDT, Dimension XPS TXXX MT, MT Optiplex E1, OptiPlex G1, Optiplex G1 M, MT G1 (+) (+) Optiplex, Optiplex Gn M, Optiplex Gn MT, OptiPlex GX1, OptiPlex GX1 Tower , OptiPlex GX1 Low Profile, Optiplex GX1 desktop computer, desktop OptiPlex GX1 mid-size, OptiPlex GX1 Ultra small FF (Net PC), Ultra Small Form Factor of OptiPlex GX1, OptiPlex GX100 Optiplex GX100 MT, OptiPlex GX110, Optiplex GX110 M, Optiplex GX110 MT, OptiPlex GX110 (R2), OptiPlex GX110 (processor Socket), OptiPlex GX115 OptiPlex GX1P, Optiplex GX1p M, Optiplex GX1p MT, OptiPlex GX200 Optiplex GX200 M, Optiplex GXA EM M, Optiplex GXA EM MT, Optiplex GXA M, Optiplex GXA MT

  Dell returned to exclusive on the Optiplex X 020 series 3020 9020 aka, but they use tiny connectors so you can not mix with a standard scope of delivery.

• any way to lock the scale of a model (not dependent on the size of the object)?

  I know about the scale dialog box and the mode of scaling and object independently, but what I would really is a way to block a model to stay the same size and shape compared to any size becomes the object, to which it is applied throughout the document.  From now on, it's hard enough to do what I say... constantly bother with issues of scale in the scale dialog box.  But what happens if you have two objects and you want them to have the same model, same size etc even if their size and move them?  Think if you are mapping and you as "swamp" or "thick granite" symbol and you want the marsh plants few stay the same size easily. It is possible now, but certainly not easy I can tell. 'Traits and effects scaling' option in preferences does not affect employers, is basically down to resize the object and then guess what percentage to keep the model. And I really don't want to do up the dialog scale up just because I want to make one of my larger items and don't want to come into conflict with the other grounds in the same way. Or maybe I'm not using the right program...

  all advice?

  Few things that comes to my mind - disable the motif size change in preferences. The select the object that has this model of fill and click twice on the shade of reason. This would reset the fill of the model in its default size. If you find that too big or small, rework on the shade of reason to get the right size. And next time, when you use the scale dialog box, make sure that you do not have "Patterns" checked.

  To change the position of tile in the fillings - select the object, press the tilde (~) key and using the Selection tool is trying to move the object slightly. Experiment a little.

  If that doesn't help - thanks for posting a snapshot.

  See you soon!

• Any way to enable the activation of the automatic plugin for a specific site only?

  If say I wanted to use "click to start" for Flash (for security reasons), but allow it to automatically run on trusted sites, such as YouTube, is there a way to do this script on a site by site specific Web base?

  Options by default, as you know, are 'always', 'click' and 'disabled', which is not enough. I want to have 'always' be under any youtube page, but the 'click' for everywhere else.

  And please don't give me the messages on "update your stuff", you lose both your own and my time, we've heard it all before.

  Thank you

  The list of details of the system indicates that you are running an earlier version of Firefox 23.0 is no longer supported with security updates.

  • It is important to update Firefox and Add-ons to the latest versions for all security patches.

  Please upgrade to the current version of Firefox 39.0.

  • Help > about Firefox
  • https://support.mozilla.org/kb/update-firefox-latest-version.

  You can control and manage permissions for the domain in the tab currently selected through these steps:

  • Click the address bar onthe Site identity button"(globe/lock)
  • Click on 'More information' to open ' tools > Page Info "with the Security tab is selected
  • Go to the permissions tab (Tools > Page Info > permissions) to check the permissions for the domain in the currently selected tab

  Note that the globe/padlock doorhanger shows the permissions that have been modified by default.

  These choices are part of the Site preferences, so make sure that you do not erase these when you remove history.