AnyConnect & authentication digital certificate

Similar Questions

• How to edit a digital certificate?

  My Server VPN downloads a digital certificate for the VPN users. I think this cert has the wrong address for the server. How can I change the ip address of cert? Or how can I stop the VPN server to require that the cert? I think the problem is to change service providers IP and do not change the address of the server in the cert.

  The IOS configuration guide covers certificates here. While you can create a new certificate self-signed on the router (usually used with https for the Web administration - see this setup guide), it is preferable to use an internal CA or 3rd party public CA.

  To turn off, find where it is called in your configuration. 'show crypto CA certificates' will show you what certificates you have entered on the router. One of them should be shouted in the VPN configuration.

  However, it is not just as simple as that. If they are used for authentication and you remove them, they must be replaced by something else - as a preshared key, reference to a database user (internal or external such as LDAP or AD), etc. It is therefore a non-trivial task. You can get an idea what it comes to certificates of installation correctly at this link.

  If you are not comfortable with the CLI, you might want to simply set up a new VPN profile using the GUI of CCP. Here is a link to this regime.

• Digital certificates and runaway trustd

  Just improved El Capitan (10.11), Sierra (10.12). Updated the o/s, kept my applications and data on both a beginning 2011 MacBook Pro and an iMac end of 2013.

  First question mentioned was that Outlook for Mac 2016 hung on the iMac, if I tried to open a digitally signed message (DoD PKI-signed). Had to force quit.

  Next issue noted was that Keychain Access hung when I tried to start it. No window of Keychain Access, never not published, if the icon showed in the dock. Open Activity Monitor to investigate and found that the process trustd seems to have run away. The memory of the process was beyond 1 GB. Forced quit Keychain Access, then sent a HUP signal to my trustd process via the terminal. Once he showed up, process trustd memory reached 11.9 MB.

  Trying to reopen the Keychain Access, but it hung again. I let it go for a while, and Sierra informed me that he had become insensitive (thanks!). Killed, then looked at the allocation of memory of trustd. It was close to 2 GB.

  I upgraded the Macbook Pro at the same time (won't do again). Soon after the connection, I noticed that the fan spun. When he didn't slow down after a bit, I open Activity Monitor and saw that trustd process memory beyond 8 GB. (The total physical memory on the Macbook is 8 GB).

  On the iMac and Macbook, I created the new keyrings connection to get rid of all personal digital certificates.

  It helped on the iMac. I work in the old Keychain, so I do not have access to the certificates. If I do, Keychain Access crashes and trustd fled. I can return to normal by sending a HUP and stop smoking-force Keychain Access. In addition, Outlook crashes and trustd fled if I touch a digitally signed message. Again, I can go back to normal in force - quit Outlook and sending a HUP to trustd.

  The set of connection fees did not help on the laptop. trustd to save, eat memory in the process. I could reset by sending a HUP, after which she would free up the memory, but then he save again. From scratch (erase the hard drive, install Sierra) solves the problem of runaway trustd. I did not restore the Keyring containing digital certificates.

  Is this a problem with trustd? I need personal digital certificates to work on at least one of the computers.

  I also have problems with a runaway trustd, although slightly different triggers.  I'm trying to synchronize my mailboxes from several of my servers.  It downloads a few hundred saved messages, then trustd goes into overdrive, the fan is used, and the computer works nothing except trustd.

• ISP says "update of digital certificates expired" now no outgoing doesn't email - HELP

  That's what the ISP told me: "it seems that things worked until the moment when we updated our.
  digital certificates expire this morning. You may need to accept the new
  certificate (that I had to do on my iPhone/iPad). All e-mail applications
  differ in the way they treat the SSL certificates. Please see your
  Help files request for more information on how to import or accept a car
  signed digital certificate.

  I looked in 'view certificates' and 'validation', but I don't see anything to change or do... So, how can I accept this "new" certificate

  Thanks in advance!

  Craig

  If your ISP uses self-signed certificates ask them when they intend to become a professional store. Free self-signed certificates are basically something that exists to allow analysis of configurations without fees to pay for certificates. This leaves a loophole for tight companies, generally jobs of MOM and dad, or firms, who are simply stretched to use the correct string of voting trust and pay for their certificates.

  Not properly issued SSL certificates requires no acceptance, that the issuer or someone higher in the chain of trust is pre approved by Mozilla. It is extremely poor security to allow users wont accept SSL certificates and they are not experts in these things and could easily appove a certificate that makes their raw text of communication to third parties.
  You are done better with unsecured connections, you're free of those signed. At least you know your vulnerable.

  However, if you go to the menu Tools > options > advanced > certificates and Tower of the verify option you could do better. They are not probably set up as they sign free. Other than the view certificates and remove all those that you already have for them.

• How to export a digital certificate to 8.0?

  I update the help documentation for our online application and I'm up to ' export your digital certificate. I have instructions for 3.5 but I now add some for 8.0 and I can't find an export button. Help! (please)

  Have you tried to select a certificate, and then click the Save button?

• Problem installing KB2728973 ' Unathorized digital certificates could allow spoofing "which was released 10JULY2012

  Has anyone had a problem installing KB2728973 ' Unathorized digital certificates could allow spoofing "which was released 10JULY2012?  I could not this patch to run after double-clicking on it.  This was true for XP SP3 and Server 2003 SP2.  Your comments are appreciated.  By-the-way, I met all three requirements that are suggested in the section "Known issues" section of Microsoft.

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
      http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  ===========

  It is a forum for specific consumers. You will find the Windows Server support in these forums: http://social.technet.microsoft.com/Forums/en/category/windowsserver

• How can I validate a digital certificate for a DLL to a computer that is disconnected?

  We have a network of computers engineering which is isolated from the Internet for security reasons. New software that we just installed is based on .NET framework from the Microsoft, and we have finally mapped out horrible lag to a series of ports being open to Verisign and CyberTrust and discovered that some of the new dll have digital certificates that try to validate the system. How can I get around this without connecting the computers to the outside world? Is there something I can do on my end, or something I should ask the Publisher of the software?

  Hi CevinMoses,

  ·         How many computers are there on the network?

  ·         The computer is connected to a domain network?

  If the computer is on a domain network, please see the link below to find a community that will support what ask you

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

  I hope this helps.

• Unknown Publisher, no digital certificate valid when you try to download iTunes on Apple site

  Hello

  I can't install itunes from the apple website. Windows detects an error message Unknown Publisher 'digital certificates valid'.

  I have a Windows xp service pack 3 and internet explorer 8.

  Can you please provide instructions and the resolution of this problem of Windows.

  Concerning

  Peter

  Hello

  1. are you able to install other programs through Internet explore?

  2. what version of iTunes you trying to install?

  Method 1: Problems installing and uninstalling programs on Windowshttp://support.microsoft.com/kb/2438651 computers

  Method 2: Problem installing iTunes or QuickTime for Windows: http://support.apple.com/kb/ht1926

  Hope this information is useful.

• How can I know the FULL domain name & names for the installation of a digital certificate Public in ISE?

  We are implemented a project with Cisco ISE; but comments Portal appears to users as a "untrusted site". For problems, a public digital certificate must be installed in Cisco ISE, so he can send it to users who enter the comments Web portal.

  Now... to sell me the certificate, VERISIGN needs to know settings ISE of the certificate, such as name of area COMPLETE, names subnames, etc... How can these parameters of ISE?

  Thaks a lot!

  This isn't an easy question to answer, there are a ton of variables to include

  Local web site Central Web Auth or Auth

  LWA, the WLC is the "man in the Middle" to the request of the customer for PSN (server nodes), the WLC takes the request webauth and resembles webauth then the redirect URL that you put in the WLC

  If the redirect webauth URL is https://ise01.mycompany.com:8443/guestportal/login.action, the WLC is a redirect but the virtual IP address comes in 1.1.1.1, who was as trustworthy or redirection complains, then you may have to get the public certificate for the fqdn of 1.1.1.1, and the comment server. You can create a CSR using openssl or you can just enter in ISE and create a CSR, but you can only set CN = ise01.mycompany.com and nothing else, as long you have a single NHP is good, but if you have several Ssnp, you need to change your CSR so that you have to use openssl to create CSR using a file openssl.cnf and then with openssl, you do the following:

  openssl req - new - nodes-out openssl.cnf omf-01 - ise04.csr - config

  You must do it the way I said above regardless of CWA or LWA, if you have more than one PSN, you must point to a FULL VIP domain name and then configure your DNS to answer for these host names. With LWA, you get virtual IP WLC involved 1.1.1.1, so you don't have to worry about getting a certificate for this, it is a cleaner installation, but you must always do all the rest. It must ensure that users of your guests have the opportunity to join the portal comments and be able to solve the given DNS the dns server that they have been configured with.

  Content of the file openssl.cnf:

  [req]
  nom_distinctif = req_distinguished_name
  req_extensions = v3_req
  default_bits = 2048

  [req_distinguished_name]
  countryName = name of the country (2-letter codes)
  countryName_default = en
  localityName = name of the locality (for example, City)
  organizationalUnitName = organizational unit name (for example, section)
  commonName = Common Name (eg, YOUR name)
  commonName_max = 64
  emailAddress = Email address
  emailAddress_max = 40

  [v3_req]
  keyUsage = keyEncipherment, dataEncipherment
  extendedKeyUsage = AutClient, serverAuth
  subjectAltName = @alt_names

  [alt_names]
  DNS.1 = guest.mycompany.com
  DNS.2 = guest.mycompany.com
  DNS.3 = ise01.mycompany.com

• How to match tunnel-group with auth ASA 8.2 and IPSec VPN Client using digital certificates with Microsoft CA

  Hello

  I set up a lab for RA VPN with a version of the ASA5510 8.2 and VPN Client 5 software using digital certificates with Microsoft CA on a Windows 2003 server. I did the configuration based on this document from Cisco's Web site:

  http://www.Cisco.com/en/us/partner/products/ps6120/products_configuration_example09186a0080930f21.shtml

  Now, the vpn works fine, but now I need to configure a tunnel-different groups so I can provide different services to different users. The problem I have now is that I don't know how to set it up for the certificate is the name of tunnel-group. If I do an ASA debug crypto isakmp I get this error message:

  % ASA-713906 7: IP = 165.98.139.12, trying to find the group through OR...
  % 3 ASA-713020: IP = 165.98.139.12, no group found by matching well payload ID: unknown
  % ASA-713906 7: IP = 165.98.139.12, trying to find the group via IKE ID...
  % 3 ASA-713020: IP = 165.98.139.12, no group found by matching well payload ID: unknown
  % ASA-713906 7: IP = 165.98.139.12, trying to find the group via IP ADDR...
  % ASA-713906 7: IP = 165.98.139.12, trying to find the group using default group...
  % ASA-713906 7: IP = 165.98.139.12, connection landed on tunnel_group DefaultRAGroup

  So, basically, when using certificates I connect always VPN RA only with the group default DefaultRAGroup. Do I have to use a model of different web registration for application for a certificate instead of the user model? How can I determine the OU on the user certificate so that match tunnel-group?

  Please help me!

  Kind regards

  Fernando Aguirre

  You can use the group certificate mapping feature to map to a specific group.

  This is the configuration for your reference guide:

  http://www.Cisco.com/en/us/partner/docs/security/ASA/asa82/configuration/guide/IKE.html#wp1053978

  And here is the command for "map of crypto ca certificate": reference

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/command/reference/C5.html#wp2186685

  Hope that helps.

• Mail application asking to install a digital certificate

  I'm trying to set up an Exchange ActiveSync account and receiving the message «To use this account, you must install a digital certificate on this PC...» ».

  I looked and saw several responses to this, almost all that refer to the Exchange Server after installing a self-signed certificate.  This isn't my case.  In this case the Exchange Server has installed a 3rd party certificate (published by GoDaddy, if it matters).  I can configure this account on my Windows Phone 8 phones, in Outlook on Windows 8, on my iPad on my iPhone, Android based everything without no extra steps, but not in the user surface Mail application.

  So is it possible to configure the mail on Windows 8 RT application or should I just to tell me that their Surface is not supported users and tell them to return it and get an iPad or Android Tablet?

  First of all, Atthisaddress, thanks for trying to help.

  It works now.  I don't think it was the update of the Mail application which sets it he was still does not work after that I updated.

  What finally solved it for me was overtype and reinstall the GoDaddy certificate on the server.  I did once my boss sent me a screenshot of the error he received on a Mac (who had previously worked) and it contains a certificate error message.  Once I circumscribed and re-installed the certificate that the Mail App works just as I expect.  He doesn't want me to install a digital certificate on the client (it was a clean install of Windows 8 on a virtual machine) and just worked.

  My reproach to Microsoft maybe should have been addressed to me, because it seems that it was a certificate on my mail server error all the time.  Of course, the error message provided by the Mail App could have been a little more helpful to save some headaches.

  The Surface RT is now able to use the Mail App to connect to work email, and that's what I was looking for.

  To everyone having this problem with self-signed certificates, good luck.  I hope that Microsoft gets you to work together soon.

• How to attach a digital certificate on a document

  Hello

  I use Windows 8. I don't have any information about the *.dll files and I am not a programmer is. I'm supposed to create a document online. I need to attach this document with a digital certificate. To create the certificate I required to copy a dll file in the syswow64 folder, I did. I have who has been properly executed. This should have led to the creation of a certificate, but his does not. Any ideas?

  Thank you

  Who asked you to copy the DLL of your system folder and run it?  This looks very suspicious and malicious, and I would not be surprised to learn that you injected just a virus in your system.  What you say that you took are not required for the use of digital certificates.

• List of PT TABLES, which contain the digital certificate

  Team,

  We have set up free sign certicate in our environment.

  So, can someone share the list of the PT TABLES, which contain the digital certificate.

  Because, we do not have to refresh the environment and I don't want to lose the digital certificate after the update.

  Thank you

  Take a look at the following.  I did something similar in refresh scripts

  • PSCERTDB - raw certificate data
  • PSCERTDEFN - certificates
  • PSCERTDEFNDEL - certificates delete record.
  • PSCERTISSUER - the issuer of the certificate

• DIGISIGN digital certificate errors

  Hello

  need help to resolve the error occurred during the attempt to sign a PDF file.

  Get the following error message:

  Error encountered during signing

  The Windows cryptographic service provider reported an error:

  Key does not exist

  Error code 2148073485

  Thank you

  Hi all

  Today we published a fix that solves the problem of digital certificates which was introduced recently. If you're not already updated to the latest patch, simply open Acrobat and visit help > check for updates to apply this hotfix.

  More details about this release and bug fixes is available here: https://helpx.adobe.com/acrobat/release-note/acrobat-dc-june-02-2016.html

  Please give it a try and let us know.

  Thank you

  -ashu

• How can I prevent the text fields and drop downs changed after the form has been signed using a digital certificate? Thank you.

  Hi all

  How can I prevent the text fields and drop downs changed after the form has been signed using a digital certificate? Thank you.

  There is also a checkbox on the dialog box 'Sign' to lock document after signing.