AnyConnect tunnel-group automatic assignment without selecting any group-tunnel-group-list alias and user-group strategy.

Similar Questions

• I can't open the files I download from my Web site. I select a file in the list down and nothing happens

  I'm on a Web site, I ask the file loading, usually a report. the download occurs. I click on the button download and see the list of downloaded files. I chose one. NOTHING IS GETTING PAST. What did wrong and how fix?
  Thank you
  Joel Rehagen

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your essential information such as bookmarks and history.
  Note: but it will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• AnyConnect + timeout during automatic reconnection

  Hello

  I have configured AnyConnect with network Trust detection and automatic reconnection.

  I have a problem with this use case:

  1. Users connect to AnyConnect with certificate
  2. When the 3G network is no longer available, AnyConnect tries to auto-reconnect
  3. After 30 minutes without network connectivity, users have this alert "your connection to the secure gateway has been suspended longer than the time limit. A new connection is necessary, which requires re-authentication.

  4. If the 3G network is available, TND detects that the network is not approved and connects automatically.

  The message in step 3 is unnecessary and users think they must connect manually. How can I remove this alert?

  I tried to put the "idle time-out" unlimited in group policy, but it doesn't change anything.

  Thanks for your support,

  Patrick

  Idle time-out is the correct setting. Two things could've gone wrong. You don't want not unlimited because without a maximum connection time, which means ghosts sessions would not be cleaned up. I propose a framework of 12-24 hours.  If it still does not respond, you applied probably this to the wrong group.

• How to select multiple lines of text (without selecting all the text) within a title? (Holding Cmd does not work)

  I need to select several lines of text (in the various sections of the text) within a title without selecting any text. Holding Cmd like you would in other applications does not work, and now Shift selects all. Does anyone have a solution?

  Thank you.

  YYou cannot select several segments of text in a text block.

• Payment service returns 'purchase successful' without selecting the mode of payment (in sandbox mode)

  Hello

  I'm testing in-app purchase in my app (BB10). I added my id in sandbox mode. I go through all the messages of payment and without selecting any mode of payment (paypal/credit card), it returns successfully. is this correct behavior?

  There is free of charge with the sandbox test, so flow you state sounds as it should. Direct mode test load actually does more validation would occur before returning a result.

• Make a group without selection of all paths

  I'm working on a script that will take each pathItem in a document and put it in a group (all pathItems in the document are groupless opening, so there won't be other groups already in the document).

  I have a script that creates a group, and then puts the highest pathItem placed in the group. I just can't figure out how to retrieve all the pathitems in the document, or the same action in a loop until everything is in a single group. The kicker is, as the title suggests this script should work without selecting anything first hand (in other words, after click on an item to select). Now, if there was a way to select all elements with a script that would be great.

  Here's what I have so far:

  #target Illustrator
  //based on script from Carlos Canto
  var doc = app.activeDocument
  
  if ( app.documents.length > 0 ) {
  doc = app.activeDocument;
  newGroupItem = doc.activeLayer.groupItems.add();
  }
  
  var gi = doc.groupItems[0]; // the topmost existing group
  var all = doc.pathItems[0]; // all paths in document
  
  all.move (gi, ElementPlacement.PLACEATBEGINNING); // move selected path inside the group
  all.evenodd = true; // necessary to determine "insideness" or to make holes.
  
  

  I also have what I found here on the forum

  #target Illustrator
  // GroupFromSel.jsx
  // regards pixxxelschubser 
  if ( app.documents.length > 0 && app.activeDocument.selection.length > 0) {
      var aDoc = app.activeDocument;
      var Sel = aDoc.selection;
      var GroupFromSel = aDoc.groupItems.add();
      for ( i = Sel.length-1; i >= 0; i--) {
          Sel[i].moveToBeginning( GroupFromSel )
          }
  }
  
  

  But alas, you select so two scripts, two solutions possible. I'm just working on both until I can get one to work.

  Any ideas?

  var all = doc.pathItems[0]; // all paths in document

  It's only the highest pathItem, that to change

  var all = doc.pathItems; // all paths in document
  

  .. .and loop thru 'all' and move each within your group

  #target Illustrator
  //based on script from Carlos Canto
  
  if ( app.documents.length > 0 ) {
      doc = app.activeDocument;
      var gi = doc.activeLayer.groupItems.add();
      var all = doc.pathItems; // all paths in document
  
      for (i=0; i
  for this configuration, we will run trouble if you have other groups with pathItems
  		   

• Automatically populate a drop-down list by using another selection from the drop-down list box

  New java/preparation forms so I apologize in advance.

  I currently have a menu drop-down box 1 (Occupation) with three options: "enter your own description/blank", retired housewife. When someone chooses either retirement or anyone at home, I would another drop box 2 (employer) to assign automatically "n/a. . The employer drop box has only two options: "enter your own/blank", N/A.

  Far, I could for that box to fill but only when the person clicks in the box (as if they were about to enter their own text.) Then only it will fill the drop-down list "employer." I would like it auto fill once the person has chosen retired, Virgin or stay-at-home woman without having to enter in the box (just using the arrow to the size of the drop-down list box).

  I currently have a key shot that resets the employer box when a person chooses the option vacuum/enter your own option. I then a JavaScript (only for the housewife now) that only works if you click the box of. Key combination works I want to than the other options work as well. If the client settles on white, the choice of the employer updates automatically empty without having to click in the box of. Any help (including general advice to make my code cleaner) is very appreciated!

  Current script of typing:

  If {(event.willCommit)

  If (event.value == "") this.resetForm (["use"]); of other SetFieldValues (event.value);

  }

  The current upward, mice running JavaScript :

  var v = this.getField ("Occupation") .value

  If (v is "Housewife")

  1. this.getField("Employer").value = "N/a".

  I think maybe I should use event.willCommit in my formula, but I'm not sure how to include it.

  Thank you!

  I would not use the key sequence or MouseUp actions for this, but the action post.

  Just make sure that you set the field option to validate the selected value immediately (under Properties - Options) and then use this code as the custom validation script:

  var employerField = this.getField("Employer");
  if (event.value=="Homemaker" || event.value=="Retired")
      employerField.value = "N/A";
  else employerField.value = employerField.defaultValue;
  

• Impossible to download CVT and PDF format files-An incorrectly get formatted file name automatically assigned that Internet Explore rejects ending the download.

  Original title: secure registration problem files formatted CVT.

  I can't download and save the bank statements on a site protected in CVT format. A get - name incorrectly formatted file automatically assigned that Internet Explore rejects ending the download. A similar problem occurred on an another FTP secure sites, download PDF, but otherwise, all files download without any hitches. The problem also occurs on two desktop computers my similar configuration. In an internet café, everything works with XP but not on my new computers in the House. I use Kaspersky Internet Security 2012 and MS Office 2010 and the latest updates from Ms.

  Hello

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Add Web sites to a security zone and check the status of the issue.

  (a) open Internet Explorer by clicking the Start button, and then click Internet Explorer.

  (b) use the site you want to add to a specific security zone.

  (c) click the Tools button, and then click Internet Options.

  (d) click the Security tab and then click on an area of security (intranet Local, trusted sites, or restricted sites).

  (e) click on Sites.

  (f) If you clicked Local intranet in the previous step, click Advanced.

  (g) the Web site should appear in the box add this site in the field in the area. Click on Add.

  a. If the site is not a secure site (HTTPS), clear him requires a secure server (https :) for all sites in this zone check box.

  (h) click Close, then click OK (or click OK twice if you clicked Local intranet in step d).

  Method 2:

  Keep the computer in a clean boot, disable the antivirus and check the status of the issue.

  Step 1:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

  http://support.Microsoft.com/kb/929135

  Note: Please, go to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem.

  Step 2:

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  You can also refer to:

  Use Word to open or save a file in another file format.

  http://Office.Microsoft.com/en-us/Word-Help/use-Word-to-open-or-save-a-file-in-another-file-format-HA010370113.aspx

• Component update without selecting text?

  Is it possible to focus a field without having any text automatically? Can it be done with Forms code?
  
  Even tried writing a CCP that overrides processFocusEvent and clears the selection if the event is FOCUS_GAINED
  but apparently the painting does not react to this? Also tried repaint() but no go... pointers? Keep state
  somewhere and override getSelection? *

  You must check out the VTextArea of its scrollbox:

  oracle.ewt.lwAWT.lwText.LWCommonText textArea = (oracle.ewt.lwAWT.lwText.LWCommonText)this.getComponent(0);
  textArea.setSelectionStart(...);
  ...
  

  François

• Is it possible that when the new record is inserted in a table then this empty inserted record is automatically displayed without scrolling?

  Mr President.

  Is it possible that when the new record is inserted in a table then this empty inserted record is automatically displayed without scrolling?

  Because I change the size property of the table 5 range and my new record is inserted at no 10.

  When I click the addRecord button the new parallel line does not appear, do scroll down to see it.

  I want that we don't have to scroll down.

  The line is displayed automatically.

  as shown in the photo my behavior of page.

  

  Concerning

  If you just need the newly created line to be visible,

  You can simply set contentDelivery = 'immediate' and displayRow = "selected".

  P.S. the blog mentioned above only.

  See you soon

  AJ

• Select any table except a few tables

  Database 11g:

  --------------------

  I would like to give a right to select user on all the tables, except in a few tables.  I thought to give "Select any table", but this does not also some paintings, should not access.

  2nd way is to go... one by one, select wise schema and grant privileges using script.  But it's a lot of time because we have the very large number of tables.

  Is there another way by which we can accomplish this easily.

  You must grant select to each table. Please do not choose any table - which is almost never appropriate.

  If it's so hard, just write a query like:

  Select "grant select on" | table_name | "from some_user '.

  from user_tables

  where table_name not in ('FOO', 'BAR', "Etc.")

  and reel the results to a file.

  If it is necessary, consider granting privileges to a role and then assign this role to a user - will make it easier to manage if you ever have to do the same for other users.

• Can our laptap print to a network printer without installing any drivers?

  Our kids often connect to our wireless home network and need to print something.  Is there a way for them to quickly give the network printer and print without a tedious installation process on the laptop?

  Do we not have to install the printer and install the drivers on each laptop independently or can the computer laptop everything simply connect to the network printer and print?  If every laptop needs drivers, then is it possible that the proper drivers may be automatically installed on the laptop when it connects to the network printer?

  We print on a HP Photosmart C7180 printer connected by USB to our home computer (running Windows 7 Professional 64-bit) and Ethernet connected to our router.  The wired Ethernet printer is the shared printer on the network.  The shared printer has an IP address assigned by the router.

  The Windows 7 and Vista PC as well as Mac can simply add the printer because the drivers are included in the operating system.  The XP machines will have to download the drivers.   Download the latest version of the software for your printer from the "Support & drivers" link at the top of this page.

  To add the printer on Win7 and Vista: start > Control Panel > printers > add printer

  To add the printer on the Mac: System preferences > Print & Fax > click the '+' to add the printer.

• Close the startpoint and endpoint without selecting the first

  Hi guys,.

  I'm working on an image of polygon which means I have created hundreds and hundreds of small triangles with the path tool.

  Now, I have wondered if it is possible to create two lines of the triangle in hand and close the last third line of triangles in shortcut.

  There may be a shortcut (or almost) to connect the beginning and the end of a path? I know I can do it by clicking on cmd + J, but I first select the points which is more work than simply connecting them to the hand. It would be perfect if there's any way to close it without selecting it first, so that I can do an 'action' out of it with a shortcut!

  Any ideas?

  Pathfinder unite.

• I can't select any other font that Hoefler.  InDesign CC15

  Since the update yesterday to Indesign CC15, I can't select any other font that Hoefler.  It is only occurs with new text frames.  I can change the fonts in the existing documents and the existing text blocks to another font.  Anyone have any idea how to solve this problem?

  OSX 10.10.3 - Suitcase Fusion V5 (automatic activation of plugins not installed)

  Nevermind - clearing the fonts cache solved my problem.

• Is there a tool or function (in Illustrator or InDesign) that selects any form and 'punches' a 'hole' of this form down through several objects for the paper or the work plan?

  Is there a tool or function (in Illustrator or InDesign) that selects any form and 'punches' a 'hole' of this form down through several objects for the paper or the work plan?

  Your objects punch must be in a large group; It will cut through all that is below.

  Create the shape you want to cut and set it to black Uni. Select your group and your form and (in the transparency palette), click make mask.

  Uncheck the Clip, and then return to the palette.