Anyone else miss the Sansa Lil' Monsta?

Anyone else miss the Lil' Monsta?  I even vaguely remember a version of the firmware, or a modification of it, which was an animation of the Lil' Monsta power (but it locks my drive and I had to switch back).

Went.  But not forgotten.

R.I.P. Lil' Monsta.  We hardly knew ye.   * sniffle *.

I like the lil Monsta too, especially the site of the defunct lilmonsta.com, which featured the Monsta demonstrating the e200.

You should have just seen the Monsta chomp on the music to appreciate it.  He has even let out a burp later, nice touch.

Once, I promised to wear the Monsta earlier.  Dig up that baby, let's party!

Bob

Tags: SanDisk Sansa

Similar Questions

  • failure of migration on wifi. error message. programs do not work. anyone else having the same problems?

    failure of migration on wifi. error message: migration quit unexpectedly. Apparently, the migration is yet complete, but with a lot of mistakes. many programs on the new computer do not work. anyone else having the same problems? never had any problems with apple before. Maybe it's my last mac.

    Migration via wifi is a bad choice, physically connect the two PCs with an ethernet cable is the best solution. Start the computer in recovery (command-R) and erase the boot partition. Then reinstall Mac OS X and migrate again using ethernet. Some programs such as MS Office may still have a problem and need to be reinstalled.

  • Siri handsfree works intermittently after updating iOS 9.2. Anyone else having the same problem?

    Siri handsfree works only intermittently after updating iOS 9.2. I have a Mustang from 2015 with my ford touch. Siri handsfree worked perfectly before the update. Now when I use it it disconnects sometimes. Anyone else having the same problem?

    Yes, I have the same problem with my Ford Escape of 2013 using MFT version 3.8 (just installed).  Use IPhone with IOS 9.2 6.  I can call him only intermittently SIRI when I use the long pull on the switch.  Also, when I do it, SIRI goes my audio setting that I played (usually USB iPod) to BT audio.  I'm trying to see if the fix suggested elsewhere for the BT audio works but were unable to invoke SIRI to check.  Ford Sync experts were of great help and finally told me to go to the dealer.  I read somewhere after a 'google' search a person represents himself as a guy HE said it's a problem of IOS and Ford does not change (code) until we as customers.  That's all I know right now.

  • I have the last El Captain MAC update fom and an iMac Mid 2015 retina but Lightroom refuses to use the GPU indicating a display error. Has anyone else experienced the same question?

    I have the latest update of El captain and an iMac Mid 2015 retina but Lightroom refuses to use the GPU indicating a display error. Has anyone else experienced the same question?

    I also got an iMac mid 2015 27 "retina and not have problems. But I have another option 'see the add screen pictures"deselected it's the ravages of a single reading. See screenshot of my graphics card.

  • Windows 8 cursor jumps in the existing text and continues to type here rather than the finish line that I am on, anyone else spotted the same thing?

    Just upgraded to Windows 7 to 8, using MS Office Word 2010, worked well on Win 7, but now type text and the cursor suddenly jumps into the existing text and continues typing, rather than the finish line that I'm on.  Thought, I was accidentally touched for touch pad or other keys, so now consciously look for this but can find nothing on my part.  Have experienced it before with a processor OS Linux and Open Source, when the OS has been updated.  Think there may be a loophole to WIN 8.  It also happens when keying in the screens like this, that has happened twice while here. Someone else spotted the same thing?  Or is it just me?

    Also, anyone know how to disable "Open Tap" on the Mouse touchpad of the notebook, its annoying, I could disable in WINDOWS 7 but cannot know how Win8.

    Thank you very much for your help, the setting was not really there, but you gave me the name of the device, so I was able to download the right driver from

    http://www.Synaptics.com/resources/drivers

    above mentioned just in case anyone has the same problem. The site recommend to go with the hardware vendor's website, but ASUS has wrong driver, one of the above works fine.

    Its such a relief to be able to settle this problem - THANK you

    Lets see if it sorts the problem MS Office too.

  • KB975051 updates and KB976882 will not install on Windows Vista. They are Office and Outlook 2003. Anyone else having the same problem?

    Tried several times.  Windows Update keeps prompting me to install but it fails every time.

    I was finally able to solve the problem of not being able to update KB975051 and KB976882 by taking the following measures:
    In Google I typed in 'the kb976882 will not be installed.  Under options, I got "Download Details: update for Microsoft Office Outlook 2003 Junk...» "the site of Microsoft.com/downloads.  I downloaded from this site and then also picked KB975051 on other popular choice located lower on the page and done the same thing.  I don't remember this solution being a few days ago.
    I hope you find that this approach works for you as well.  Ignore the entrance of miss under my name as proposed in another comment response.  I have missunderstood as a way to comment on...
    Craig

  • Anyone else having the comment to check that you are no longer connected to the Internet?

    When I am connected to internet, wifi and I'm trying to install/upgrade to update version 9.3, entering my access code, the check symbol lights up, and then I get the message: IOS 9.3 cannot continue because you are no longer connected to the Internet... Well, that's b... I am, I was, and I continue to be... How can this be repaired?  I am now the only active amother with wifi, (my Ipad2is wifi) location and I tried it again, in fact the 3rd time and it keeps giving me the same message that I received when I was on my wifi secure my home.  Any help?

    I'm having the same problem. I tried it in different places, and I know that I am connected but I still get the message. I tried the update at night last night and it wouldn't work. I am at a loss on how to get this update if he don't recognize that it is on the Internet.

  • Is anyone else on the Mavericks with problems of graphics following the update of security of December 2015? (13F1507)

    Since this security update, I was plagued by accidents and all the computer hangs when you use graphics intensive applications. The worst part is any game I try to load, but also appeared to a lesser degree in Illustrator, SketchUp and Photoshop (according to other users in the household). I tried Nvidia webdriver without result. Same questions. Above all, I'm just curious to know if I'm alone on this.

    Data sheet:

    Mac Pro early 2008

    Processor 2 x 2.8 GHz Quad - Core Intel Xeon

    Memory 18 GB 800 MHz DDR2 FB-DIMM

    Graphics  NVIDIA GeForce GTX 760 2048 MB

    Software  OS X 10.9.5 (13F1507)

    Issue continues with today's security update. OS X 10.9.5 (13F1603)

    For some reason that it is showing as resolved, but it is not.

  • I can't see the RAW files of my new Sony a6300.  Anyone else having the same problem?

    I can't see the RAW files of my new Sony a6300. (the camera just came out 2 days ago) Also, I have the a6000 and have no problem looking at a RAW of her file.  I have to just wait for an update of Lightroom enable the display of RAW from a Sony a6300?

    Thanks for any help you can give,

    GB

    Hi GB,

    Support for Sony A6300 has been added in Lightroom in today update.

    Suggest you to update to Lightroom: keeping up-to-date for Lightroom

    Kind regards

    Claes

  • Anyone else experiencing the random loss of internet connection while using character animator?

    I seem to have a random loss of internet connection when performing character animator.

    Look into this further. It seems not related to the animation of character since today, it seems to happen randomly when running a simple browser. I think that maybe it's just my old router is about to die. I deleted my DNS cache and renewed my IP address and reset my router, so I hope that's all it took. Otherwise, it may be time for a new router.

  • OE6 in XP, compaction of the lost files all emails. Anyone else done this?

    Using Outlook Express 6 with Win XP I compacted files as requested. next time, I used email all old messages were gone and never seen again. I've never used 'compact the file"once again - it was a disaster. Anyone else done this?

    If you compact, you will always lose messages at any given time.
     
     
    Two reasons the most common for what you describe is disruption of the compacting process, (never touch anything until it's finished), or bloated folders. More about that below.
     

    Why OE insists on compacting folders when I close it? :
    http://www.insideoe.com/FAQs/why.htm#compact
     
     
     
     
    Recovery methods:
     
    If you are running XP/SP3, then you should have a backup of your dbx files in the Recycle Bin (or possibly the message store), copied as bak files.
     
    To restore a folder bak on the message store folder, first find the location of the message store.
     
    Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
     
     
    In Windows XP, the .dbx files are by default marked as hidden. To view these files in the Solution Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.
     

    Note: If you have new messages in the folder you are go restore, move them to a folder first created user, or they will be lost. They can be moved once the old posts have been restored.
     

    Close OE and in Windows Explorer, click on the dbx to the file missing or empty file, then drag it to the desktop. It can be deleted later once you have successfully restored the bak file. Minimize the message store.
     
     
    Open OE and, if the folder is missing, create a folder with the * exact * same name as the bak file you want to restore but without the .bak. For example: If the file is Saved.bak, the new folder should be named saved. Open the new folder, and then close OE. If the folder is there, but just empty, continue to the next step.
     
     
    First of all, check if there is a bak file already in the message. If there is, and you have removed the dbx file, go ahead and rename it in dbx.
     

    If it is not already in the message, open the trash and do a right-click on the file bak for the folder in question and click on restore. Open the message store up and replace the .bak by .dbx file extension. Close the message store and open OE. Messages must be in the folder.
     
     
    If messages are restored successfully, you can go ahead and delete the old dbx file that you moved to the desktop.
     
     
    If you have not then bak copies of your dbx files in the Recycle Bin:
     

    DBXpress run in extract disc Mode is the best chance to recover messages:
    http://www.oehelp.com/DBXpress/default.aspx
     
     
     
     
     
     

    A general warning to help avoid this in the future:
     

    Do not archive mail in default OE folders. They finally are damaged. Create your own folders defined by the user for mail storage and move your mail to them. Empty the deleted items folder regularly. Keep user created folders under 300 MB, and also empty as is possible to default folders.
     

    Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently.
     
     
     
    For more information, see:
    http://www.oehelp.com/OETips.aspx#3 
     
     
     
    And backup often.
     
     
    Outlook Express Quick Backup (OEQB Freeware)
    http://www.oehelp.com/OEBackup/default.aspx  
     
     
     

     
  • I upgraded from Dreamweaver CS4 to CS6. but now "a Technical error occurred - cannot connect to the host. I spent hours with the technician of the host and we can't find the error. I reinstalled DW4 and it connects to accommodate perfectly. Anyone else se

    I upgraded from Dreamweaver CS4 to CS6. but now when I want to download, I "MFP error - cannot establish a connection to the host. I spent hours with the technician of the host and we can't find the error. I reinstalled DW4 and it connects to accommodate perfectly. Anyone else seen this problem?

    Mac OS 10.8.5

    DW6 error code.png
    None of these issues are causing the error in DW CS6. We double-checked all of them and we did everything right. Also I have exactly the same SiteSetup in DW CS4 and that works perfectly well. Might need to factor 6 which did not exist in the 4? Something that is not in the SiteSetup but in a hidden dialog box?

    I can also download my host using Fetch, a third party FTP. And like I said that DW CS4 works very well. So the problem is not with my host, sound with DW CS6 in particular.

    You are most likely missing something fairly simple (some goofy box cache you in some menus random). The best way to solve this problem, without playing 20 questions...

    1 open the site in DWCS4 and go to Site > Manage Sites > export to create a your site settings .ste file.

    2. close DWCS4 and open DWCS6

    3. go to the Site > Manage Sites > Import to import the .ste file to create a new site at DWCS6

    This will create an exact copy of your CS4 settings in CS6. If it still does not work, let know us and someone should have another idea for you.

  • My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

    My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

    Hello brooksm549,
    Thank you for using communities of Apple Support.

    I got your message which, since updating your iPhone 6 to iOS 10.0.2 your iPhone stops when it is 40% and the power to empty very quickly. I understand your concern with the iPhone turn off and drains the battery. I recommend you to review the use of the battery to see what app contributes more to the battery drain. The following article will provide you with steps on how to check the use of the battery:

    On the use of the battery on your iPhone, iPad and iPod touch

    When you know about the soft uses more battery, you can change your settings in order to optimize the battery life:

    Maximize the life of the battery and battery life

    Best regards.

  • Unable to send message AT & T - does not connect to the server. Anyone else having this problem?

    All of a sudden I can't send messages on my AT & T account. I get a message that Thunderbird cannot connect to the server (SMTP). Called at & T and they checked all the settings. I can access my email account on Apple Mail and Yahoo (AT & T email provider), and yet I can not send messages on Thunderbird. I can receive but not send.

    I tried deleting the account and the recovery, but that has not helped. Does anyone else have this problem?

    Christ1,

    Thanks for the tips.

    Even set up a new account did not work. Despite AT & you s claim that it was not a problem with their servers and taking me through a number of measures to ensure what was the origin of the problem, he as magically disappeared as soon he came a few hours after all the machinations. So, still do not know what caused it, but it disappeared.

  • Anyone else having problems updating apps from the app store?

    Anyone else having problems updating apps from the app store?

    I have the problem. I'm running on iOS 9.3.2... I have 29 apps waiting for update, but its not updated. No matter what fix on this yet?

Maybe you are looking for