Anyone know why first stopped randomly read my MXF files
I transferred to my computer from the Canon C300, imported and made my first cut of the film the week without problem. Today I opened creation and now it will not read half of the records. She still plays the sound and I can still play the files on VLC Player, but in my project, they are just a red screen.
Any suggestions? I'm desperate!
I worked on a work-around for this. I have used Miro video converter (free) to transcode the files problem (it was only half ever files) in ProRes files. The only disadvantage of this software is that it puts the two audio channels on a single track. To work around this problem I imported the file ProRes in first and then added the audio MXF file (still works) and then exported to a new ProRes file. I then relinked these new files in my project and they are still working.
I used Mac and the 2015 first CC version.
Tags: Premiere
Similar Questions
-
My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green. Wifi continues to operate even when the light is orange flashing. Anyone know why this is happening?
The next time you see the flashing light amber...
Open Finder > Applications > utilities > AirPort Utility
Click on the image of the AirPort Express
If you see a button update, click on update the firmware on the airport
Otherwise, find status and click on the little orange dot it. A message will appear to say why the airport complained and suggest a remedy for the issue.
-
Original title: whistle sound at the start of the pc
I hear a hissing sound at startup on my pc that I never heard before, and I have windows vista, anyone know why? I continue to reboot my pc until it stops.
Hi Cupcake3381,
· Did you do changes on the computer before the show?
I suggest you to check and clean the boot if the problem persists.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.
Let us know the results.
-
original title: Defender
Does anyone know why when I run the defender and he finds a Trojan horse, and I try to remove it it starts to do then after some time the computer stops and when I restart it Defender always tells me there is a Trojan horse and the same thing happens when I try to remove it?
Hello
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes
http://www.bleepingcomputer.com/download/anti-virus/rkill
If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
-
I just moved from windows to mac and changed my photoshop and lightroom, but now continues photoshop and lightroom stopping self on the mac, mostly photoshop and lightroom, anyone know why?
Yes, never make it. I think Mac Yosemite by default active Standby Mode.
Nancy O.
-
Does anyone know why my iMac G5 osx10.5.8 suddenly developed continuous small networks of lines on the screen please?
I tried to provide screenshots - insert an image does not accept.
Just happened while the iMac was asleep.
Thanks in advance
Tony
The image seems to reflect the possibility of problems of graphics processor.
Some models had a history of failure or bad solder connections. others may
have a combination of capacitors & other materials; Finally we have to fix.
https://DuckDuckGo.com/?q=imac + 24 - anomalies graphics + 2008 + in +& t = ffsb
One of the remedies for a graphics card problem, is a re - weld made by the
users who have taken their card from the computer & their cooked in the kitchen oven.
This idea has worked for some; You may be able to contact an authorized Apple
Service provider or see if any of the parts suppliers in line can answer questions
availability of replacement given to nine graphics cards, if you were
can be removed from the logic board or if it is affixed, or welded to the card.
An iFixit.com repair guide for your series of iMac (Intel-processor 2008) 24 inches
can show that if that article can be virtually eliminated, if if will show process.
https://www.iFixit.com/device/iMac_Intel_24%22
The details of the computer in the bottom of your post isn't an iMac G5 model, and
There is no powerPC G5 processor equipped Macs after late vintage
2005 to early 2006; If the computer in the discussion is a G5 is not 24 inches
and would be a model of Intel. They use a different architecture than G5
powerPC even though in some respects are similar at least in the General design.
This contains all guide ifixit for iMac G5 Power repair (there is no 24-inch model)
https://www.iFixit.com/device/iMac_G5
If you have an iMac with Intel processor and an older iMac PowerPC G5, specify.
Don't know if a reset of the SMC or likely to alter the symptoms or change NVRAM
the Visual problem on the screen; an underlying hardware problem is a likely cause.
• Reset the management system (SCM) controller on your Mac - Apple Support
• How to reset the NVRAM on your Mac - Apple Support
If this is your model iMac (24 inch Early 2008) follows the model of generation identifier:
Introduced April 2008
Abandoned March 2009
IMac8, 1 model identifier
Model number A1225
EMC 2211
MB325LL/A order number
First Prize $1 799 (2.8 GHz) $2 199 (3.06 GHz)
You may be able to find the numbers of reference and research for replacement new or repaired
old stock graphics cards. A friend had one of these models of iMac 24 inch 2008 and
It failed due to a graphic processor; where she lived the BestBuy did not fix
She even if it has been purchased by them with their extended warranty; No applecare.
So, there are some out there in almost perfect condition, but not fixed, always.
Do not know if the charges involved would be the value relative to the other
later construction that can have no history of similar design construction. {Confirm the identity of the iMac.}
Sorry I don't have any new ideas regarding this problem.
-
Number keys don't work since the upgrade from vista to windows, anyone know why?
Numbers on my laptop keyboard keys don't work since the upgrade from vista to windows7, anyone know why? Keys of numbers very well work in office and other software for browsers
See the following troubleshooting steps below thanks Azam K with Microsoft Support:
Try to activate the numeric keypad and check if it helps, here are the steps:
1. open on-screen keyboard by clicking theStart button,all programs, Accessories, easy accessand then clickingOn-screen Keyboard.
2. click onOptions, check thepad box and then clickOK.
I also suggest you to start the computer using safe mode and check if it works properly, following the steps:
1 restart your computer if it is running.
2. tap on the F8 key after your initially on powers computer.
3. Once you see the menu Advanced Boot Options, you can stop tapping.
4. use the up/down arrow keys to highlight your selection.
5. select Safe Mode and press ENTER.
6. you should see loading drivers and wait please.
7. you should then be at the Welcome screen.
8. connect to your computer using an account with administrator privileges.
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-modeIf it works fine in Safe Mode, then try to perform the audit and the clean boot, here's the link:
http://support.Microsoft.com/kb/929135
If it is not working in Mode without failure, then try the System File Checker and see if it helps, here are the steps:
1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
2. click on continue or provide administrator credentials if prompted.
3. in the command prompt window, type the following text, and then press ENTER:
sfc/scannowHere is an article that will give you information about Scan SFC:
http://support.Microsoft.com/kb/936212I hope this helps!
OT
Change options for accessibility on Windows 7
Control Panel
l---> ease of access Center
I---> make the keyboard easier to use
I---> uncheck "turn on mouse keys. -
Does anyone know why audio keyframes do not work in PE13?
Does anyone know why audio keyframes do not work in PE13? I put in a track audio and changed levels, but audio playback remains constant. Oddly enough, even the level of volume (in settings-> Volume slider) moves from top down during playback of the clip. But the same audio output is completely unaffected. Weird.
marioj
On what computer operating system is your first items 13 running? Have you updated to the 13 to 13.1 yet? If this isn't the case, please do.
Assuming you are not a misinterpretation of the workflow for keyframing property of volume at the level of the timeline or tab/adjustments volume pallet/expanded, please remove the file Adobe Premiere elements Prefs (configuration file). For the elements first 13/13.1 on Windows 7, 8 or 8.1 64-bit
Local disk C
Users
Owner
AppData
Roaming
Adobe
First Elements
13.0
and in the folder 13.0 is the Adobe Premiere elements Prefs file that you delete. If it does not, then delete the 13.0 the folder in which the Adobe Premiere elements Prefs file exists. Don't forget to work with folder Option show hidden files, folders and disks enabled so that you can see the full quoted path.
Please review and consider, and then we can decide on what was then based on details in your response.
Thank you.
RTA
-
I get Red pixels on my images recently, anyone know why?
Does anyone know why I see these red pixels in the LR develop section? When you export to JPEG red pixels do not exist! This has happened only recently. I checked my display drivers and calibrate my screen but can't seem to stop appearing. She has recently appeared in a lot of pictures. Not aware of any change other than LR updates.
To add to by councils, see the small white triangle at the top right of the screenshot in the upper corner of the histogram? It is white to show that you have enabled the highlight clipping warning.
Clicking on it will also turn it extinguished/turned on.
-
Anyone know why the images using the viewer keep appearing behind the thumbnails?
Anyone know why the images using the viewer keep appearing behind the thumbnails?
Can you provide a link?
Probably your best way to do it would be to create your first "lightbox" like a ToolTip by using the ToolTip Widget, and then that way you nest not viewers.
But if you can provide a link maybe I can think of a better way to do it.
-
I have a MBP of 2009 end. I updated the material to 8 GB of ram with an SSD of 240gig. I want to run the new OSX, but is not on the list approved for the update. Anyone know why?
It is a decision that was made by Apple. El Capitan is the newest OSX that will support a 2009 MBP.
This is not uncommon. My 2006 MBP came with Tiger, but is limited to OSX Snow Leopard.
Old hardware ends up by becoming obsolete with newer technology.
Ciao.
-
I liked the old version of iTunes that allowed me to delete songs from my camera if I needed to make room for other things. Does anyone know why it was changed?
You have to ask Apple why the design has changed. You should still be able to delete songs by changing your selection of synchronization and synchronize.
Or you can delete songs directly on your iPad and other iOS devices, directly in the music app or via settings > general > storage & use iCloud > storage management > music
-
Does anyone know why the tabs on my firefox is no longer tell me the name of the IM site, they show just the symbol of the site.
I have the latest additon of firefox and only noticed this today... so not after I've updated, the name of the site appears if I move the mouse over the tab but it flashes and will not stay there, I can't seem to find a way to get the site back on the tab name... Help please!Hello, you can try to reproduce this behavior when you start firefox in safe mode, once? If this isn't the case, maybe an addon intrudes here or there is a problem with hardware acceleration...
-
Does anyone know why I would double in pictures pictures that vary considerably in size? Who is the likely cause?
If you see this by snooping directly in the photo library file, are not!
Photos is essentially a database program. The one and the only way to manage images in the library is via the interface of Photos, or you will corrupt the database.
In addition to store the original files (if you do not ckoose to keep a local library optimized), pictures also maintains smaller, miniature to speed up the loading of the different images.
-
I have a MacBook Pro late 2015, every time I have out of mode 'sleep' it is frozen and I turn it works. Anyone know why this is happening?
Maybe you are looking for
-
I refreshed firefox and now all the firefox help is in text mode.
I updated and updated firefos and now all infterfaces help and firefox are in text mode. Ohe sites are very good. I am running windows xp sp3. all modules and extensions are disabled
-
Still disappointed with Apple TV Surround Sound!
Well, after several months of use of the Apple TV4, I must say that I am still very disappointed with the sound surround. I have an audio receiver system and decent surround speakers, but since the purchase of the ATV4 the sound is not as good as it
-
HP Compaq 8200 Elite SFF PC: Population of memory HP Compaq 8200 Elite SFF PC
What is the maximum RAM, this model can accept? 16 GB or 32 GB? in the manual it says maximum 16Gb and it says in another manual maximum 32 GB which is correct? What channel is the channel A and channel is channel B? In the manual it shows Dimm1 and
-
A30: Daytime software runs a Microsoft Error Message
Hello everyone (everyone!)Can someone help me with the following problem please? I am a pensioner and Microsoft want to charge me to ask this question.I have an A30 works with Windows XP.I also have a Sharp ZQ770 electronic agenda with agenda. softwa
-
find the memory leak when switching from Teststand object reference to vi
I use Teststand to call labview vi and col ThisContext sequence to vi as object reference, but if I just completed this step and I can find the memory to help keep more, how can I avoid leaks memory inside the vi. See my vi, is displaying an interfac