Anyone know why I get the code 2 error message when you try to update CC2015 on my Macbook Pro?

Similar Questions

• Get the "layer break" error message when you try to preview a DVD single sided, or build a disk folder or ISO image

  Hello!  Hoping someone may be able to help with a strange problem.  I have not found anything in the forums or on the web that match my symptoms.

  I use Encore CS6 (v6.0.1.013) on a MacBook to the retina year last to create successfully a number of single-sided DVD with menus, chapters and all that.  I usually make a copy of a previous project to DVD, then replace the video media with the new files and transcodes them, move and rename chapter markers and rework the menus in Photoshop.  I will then build the ISO images to DVD and Blu - Ray (both single-sided) and use them to burn multiple copies of each DVD for customers.

  This week, all by developing one of these projects, trying to create an ISO from DVD image that looked like it would take on a 4.7 GB DVD, I received the message "layer break" ("the chosen layer break does not double layer requirements.  To resolve this problem, set a new layer break manually or choose to automatically set the layer break. ") because (I guess) the material was too long for the 4.7 GB DVD (generation screen now shows approximately 5 GB of material are in the project).  This is the first time I've seen this message - usually just tells me that the material is too big for the DVD.

  I re-transcoded the material down to well under 4.7 GB (about 3.9 GB), returned and replaced the files transcoded, and now the generation of DVD screen shows that there are approximately 700 MB of free space on a 4.7 GB DVD.  But I have not yet able to build any version of the DVD (image, folder, drive), without the message 'layer break '.  I also now get this message of breaking down even trying any menu, killing my ability to get a preview of the DVD menus in Encore to "Preview from Here".

  Just to see what would happen, I chose a 8.4 GB double layer DVD and selected 'manual' instead of 'auto' for the selection of layer break, but never had the Selection dialog box of a break layer, just the error message "layer break".

  Usually, I build images DVD and Blu - Ray with the same material in the same project.  I use different transcoding settings for each, and I was able to build an ISO from Blu - Ray without this "layer break" error on the Blu - Ray version (which is about 24.5 GB when built).  And as I mentioned earlier, this is the first project where I saw this message of layer break.

  Any suggestions would be greatly appreciated!  I would rather not to recreate the project from scratch, but I'm worried that I might have to.

  Thank you

  Jon

  Thanks for the quick response!  My problem is that I don't want to make a record double layer - it's a single layer 4.7 GB max project (currently at about 3.5 GB, after removing the extras timeline and asset to see what it might do).  And even when creating a file, I get the error message "layer break", so I couldn't use ImgBurn if I wanted to.

  Thanks for the links - I had seen a lot of them before, but missed a comment from someone, which means that once a layer break set in yet, it cannot be changed.  It makes me wonder if, once again goes in the way of thinking that a rupture of the layer is required, there is no way to disable this behavior.  Has anyone seen this behavior?

  I think my only option at this point is to rebuild the project from scratch, following Neil Wilkes strategy for the command to add assets (I had not paid much attention information previously).  Suggestions are always welcome, however!

• Someone at - he managed to get the "page not available" message when you try to download apps?

  I recently joined the Adobe Creative cloud, but when I try to download one of the applications I get a blank page with the message "page not available", I tried both THE 11 and 14 of Chrome, both with the same results. I've also temporarily disabled firewall/scanner virus and anti spam, but without result. I use the optimized UK Server?

  I think it's due to the interruption of the Adobe server / comms reset

  Any ideas?

  David UK

  I have not seen other reports of this problem.

  I suspect that you have a local network problem.

• Error message when you try to update the date of birth for child

  My kids already have Apple Id.

  I'll put up the family sharing and added them to the family using their Apple ID.

  The year of birth is not associated with their profile (guess it was not necessary at the time to create the profiles).

  So I try to update the year of birth, following the instructions provided on several Apple Support pages, for example Apple for your child - Apple Support and sharing of the family IDthat says: "If your child already has an Apple ID, you can update their email address, date of birth, Securityand more."  (date of birth = > link: date of birth associated with update to your Apple - Apple Support ID)

  BUT regardless of where and how I'm trying to update the birth year, I get the error message, it can not be updated at the moment...

  

  (screenshot Danish text)

  How to upgrade to the year of birth? Or when it will be possible to do the update?

  Kind regards

  Michael

  I understand that your child has had to date and that you will allow once you have received approval

• Why do I get the access denied error message when you are logged in as administrator?

  "Error" failed to create the file 'C:\Windows\Fonts\[font name]. " Access is denied. "

  is received when I try to install a font by being logged on as administrator (I'm the only person who uses this)
  computer with password protection guest no account)

  or when I use WinZip the fonts folder is not available

  The fonts folder is blocked with a "read-only" access  I can't find any way to change the permissions on the folder (there is no security tab), and any attempt to change the status of reading is has met an insufficient privileges error message.  I notice that the fonts have been added during the last few days several times but I have nothing personally for it - he did alone (how I don't know).  I admit be baffled by your inability to add fonts using your CD (even though I'm reasonably sure it's read-only permission which is at the origin of the problem). I use Vista Business SP2 32-bit and my comments were based on it.  I never really tried to install fonts on my system, so I don't know if I would have the same problem - I presume that I would give for the same reasons.  The article I posted http://windows.microsoft.com/en-US/windows-vista/Install-or-uninstall-fonts explains how to install individual fonts in formats of special fonts - it does not how to do when you use a CD with an install button.  Have you tried right-clicking on the button install to see if it brings up the run as Administrator option (it probably won't)?  Here is another article on how to install fonts: http://www.lytebyte.com/2007/07/03/how-to-install-new-fonts-in-windows-vista/.  If you link to the CD player will be able to see the individual fonts and "select all" or according to which you want to install - instead of using the installation with the CD button (if you can find the right folder (s)).  Here is an article from third on the installation of the http://www.windowsreference.com/windows-vista/how-to-install-fonts-in-vista/ fonts that suggests using the install button should work as should drag / drop it into the fonts folder - thought we seem to be having trouble with these procedures (and I think he did the permissions block which I can't imagine why he's here or why there is no security tab allows you to adjust).

  Maybe someone with more knowledge (like Engineer Support or an MVP) see this thread and respond with a solution.  In the meantime, I'm puzzled.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• I get the code 0 x 80004002 when I try to update windows defenders

  I get a code that reads 0 x 80004002 when I try to put defenders of windows up-to-date

  Hello

  You don't say what your Antivirus.

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• Get the error message when you try an upgrade to Vista on Satellite Pro U200

  Hello
  When I upgraded my Satellite Pro U200 to Vista (original CD using Toshiba), I couldn't install Config Free program. When I want to install it, I get the message 'the installation image is not corrcet' ideas for this problem?

  Thank you

  Hello

  Maybe you need to download again the configfree for your machine from here:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Just download and try to install it. I can't imagine that she won´t, I ve updated work my A100 some time ago and everything works fine.
  BTW. I downloaded all the stuff from the link above.

  Please give some feedback

  Greetings

• I receive the following stop error message when you try to install Windows XP: Stop: 0x0000007B

  I need help with this error code: Stop: 0x0000007B (0xF7C85524, 0xC0000034, 0x00000000, 0 x 000000000)

  I'm a noob Microsoft Answers. I have an old computer, I'm trying to reinstall Windows XP.  It's a Dell XPS Dimension 3 (3.40 gigahertz Intel Pentium 4, 1 G of RAM).  It does start normally or in Safe Mode.  I tried to use Fixmbr, Fixboot, Bootcfg/Rebuild, chkdsk/r, Memtest86, Killdisk.  I tried to install using another hard drive (which leads me to believe that it is perhaps a hardware problem).  He gave the same error code, I think, even if I didn't write it.  The only thing I found that I have not tried is "How do I recover from a corrupted registry that prevents Windows XP startup" because it is said that it will not work on OEM devices.  The error code is Stop: 0x0000007B (0xF7C85524, 0xC0000034, 0x00000000, 0 x 000000000).  I tried to install Ubuntu on two disks and they have installed and worked properly.  I don't know what else to try except hardware troubleshooting, although I'm not too good with hardware problems.  If you have any recommendations that could put closer me to a resolution I would be very happy!

  PS Windows XP actually ran on the second hard drive, I have tried (which is currently the drive in the machine at this time).  I installed it and it starts directly in Windows.  Yay!  I have restarted this configuration several times without any problems.  But I had a problem with the Microsoft Security Essentials update so I thought that a clean install would be better.  In hindsight, I wish I had tried harder to solve this problem, but I did not.  The first hard drive suffered a crash of Windows led me to be upgraded to a Windows 7 computer.  It was more than 1.5 years ago.  I just thought that the full back story might help.

  Hello

  I'm close to some (but my experience tells me very little is certain at 100%), which has a generic windows installation CD install without the need for the Setup F6 disk, as long as the BIOS is set to RAID Autodetect / ATA (or possibly 'mix'). AHCI is a more efficient disk access method but requires F6 floppy or "slipstreaming". If the CD is already slipstreamed for your PC, AHCI should work without F6. As you say your default BIOS to auto detect RAID/AHCI, I expect a CD specifically for your system to support it, while a generic CD would not.

  I doubt that they will provide F6 floppy but you never know. If you do not ask that you probably won't get.

  You can mark the answers on this topic as "answers"...

  

  .. But if I remember correctly, you can only score a maximum of 2 'responses. I offer my final diagnosis (and maybe my first answer) as candidates, but it is completely at your discretion. You can even hold off on tagging the "answers" until you get another CD from Dell and try. It also helps other people viewing this thread hoping to find a solution to 7B stops.

  You can designate the other answers as useful if you think that it is appropriate.

  Tricky

• I get a "stub protection" error message when you try to play Age of Empires III.

  From: JPopp

   

  I installed age of empires for the second time now by tech support solution and still get the same error message.  Protection stub has stopped working.  I can't find a solution or patch to pass in addition to this message.  All solutions?

  From: Katy Pluta

  Go to control panel-> system-> advanced-> advanced system settings

  Tab-> Performance-> settings-> Data Execution Prevention tab->

  Activate "Turn on DEP for Windows programs and services only".

  Then, restart and try again

  Another response of the community of Windows Vista discussion groups

• I get the Windows Update error 80070005 error message when you try to update my Windows 7 to Windows 10.

  I recently tried updates of Windows 7 10 and received the above error.  Did a google search and came up with the joint - CMD file which I've run in administrator mode.  It seems did not make my system better.  Any suggestions?

  And the CMD file resets all security settings to what they should be?

  Thank you in advance.

  = Run Reset.cmd block

  off @echo

  setlocal

  echo.
  Determine the echo that we are on a 32-bit or 64-bit machine
  echo.

  If "PROCESSOR_ARCHITECTURE %" == "x 86" if "% PROCESSOR_ARCHITEW6432%"is"" goto x 86 ".

  set ProgramFilesPath = % ProgramFiles (x 86) %

  GoTo startResetting

  : x 86

  Set ProgramFilesPath = %ProgramFiles%

  : startResetting

  echo.

  If there is "%ProgramFilesPath%\Windows Resource Kits\Tools\subinacl.exe" goto filesExist

  echo * ERROR *-could not find file %ProgramFilesPath%\Windows Resource Kits\Tools\subinacl.exe. Make sure SubInAcl is properly installed and re - run this script.
  GOTO END

  : filesExist

  pushd "%ProgramFilesPath%\Windows Resource Kits\Tools"

  Subinacl.exe /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f/Grant = system = f > List1.ini
  Subinacl.exe /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f/Grant = system = f > List2.ini
  Subinacl.exe /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f/Grant = system = f > List3.ini
  Subinacl.exe /subdirectories % windir % / Grant = administrators = f/Grant = system = f > List4.ini
  Subinacl.exe/subkeyreg/Grant "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component based Servicing" = 'nt service TrustedInstaller' = f > List5.ini

  echo of FINISHING.
  echo.
  echo press any key to exit...
  pause

  popd

  : END

  ENDLOCAL

  = End of block Reset.cmd

  Hi Charles,

  Thanks for posting in the Microsoft Community.

  Please follow the response by AbleRR dated May 17, 2012 date and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/all/Windows-7-Windows-Update-error-code-80070005/0e113061-e876-4451-a4e9-0191e69abd66

  Please let us know if the problem is resolved or you need additional assistance.

• Get ink system failure-code-Oxc18a0201 error message when you try to print from C7180 printer

  Original title: C7180 printer all in one

  I'm unable to print I receive ink system failure-code-Oxc18a0201.

  HELP IF YOU CAN

  THANK YOU FOR YOUR TIME.

  Hello

  1. what operating system is installed on the computer?

  2. you use all-in-one printer, HP Photosmart C7180?

  3. were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link mentioned below if you have HP printers and see if it helps.

  Error Oxc18a0201 INK system failure C7180

  Hope this information helps.

• I get this error message when you try to update CS6.0: U44M1P7

  Update Flash CS6 Pro 2

  Failed installation. Error code: U44M1P7
  I am running windows 7.

  See the following help documents:

  U44M1P7 - updates:

  http://helpx.Adobe.com/Creative-Suite/KB/error-u44m1p7-installing-updates-CCM.html

  U44M1P7, U44M2P7 - CC help / cannot apply the extensions 6.0.2 update manager | Mac OS:

  http://helpx.Adobe.com/Creative-Suite/KB/unable-apply-Extension-Manager-Update.html

• I get an Error Message When you try to send emails. "some errors occurred while processing the requested tasks. Please see the list of errors below for more details". __

  I get an Error Message When you try to send emails. "some errors occurred while processing the requested tasks. Please see the list of errors below for more details".

  But it sends the message anyway... multiple copies, and she also is put in the "Outbox" in Outlook Express as if it is not sent.

  To stop the email to be sent repeatedly to the recipient, I erase it from the "Outbox" but a) you don't know if they really got it) b it is embarrassing for the receiver c) is this a bug I can fix it?

  Thanks for any help.

  You have a corruption of dbx file easily corrected.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• I get the following error message when you try to install Windows Live Essentials for Windows 7-64-bit: __One installation files seems to be corrupted. HR:0 x 80070003

  I get the following error message when you try to install Windows Live Essentials for Windows 7 64-bit:
  One of the installation files seems to be corrupted. HR:0 x 80070003

  Hello Amawob,

  Thank you for using the Microsoft answers Forums.

  Solution:

  Follow the steps in the web link below.

  You cannot install some programs or updates.

  http://support.Microsoft.com/kb/822798

  Reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

  That should solve the problem for you.

  Thank you.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

• I have the following error message when you try to access the settings preferences "load library failed with error 1114: (DLL) initialization routine failed. I use Windows OS 10. Can anyone help?

  I have the following error message when you try to access the settings preferences "load library failed with error 1114: (DLL) initialization routine failed. I use Windows OS 10. Can anyone help?

  HI lifeimagecreations

  Greetings!

  Please see this thread in the lightroom preferences entry CC2015 crashes with LoadLibrary failed with error 1114

  If this does not work, reinstall the program with administrative rights.

  Let us know if this helps

  Concerning

  ~ Assani