AP1242AG set with CLI

Similar Questions

• Can someone help me configure HP Officejet 5600 all in one set with windows7 operating system

  How to use HP Officejet 5600 all in one set with windows7 operating system

  I have a desktop HP Pavilion with Windows 7 Edition Home Premium & I want to connect my HP Officejet 5600.
  I get the "not compatible with your operating system" message shortly after insertion & the disc from the printer running. Is someone can you please help me solve this problem. Thank you... Jim

  Everything is now up & running.
  Thank you for your help attempt Distinguished Professor, my 4 step method of resolution is shared as

  According to HP Print and Scan doctor, I have the 5610.   My manual says only 5600

  I just finished successfully installed the full OS & drivers by following these steps.

  First of all, (with the disc of the operating system still in drive E, but not running)

  Connect the printer to the computer and allow it to be recognized and automatically download all the drivers.

  Download 2nd & printing performance HP and doctor Scan http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/en/hho/ipg/forum/printer_diag/&softwareitem=mp-123407-2

  3rd download & run HP printer Install Wizard for Windows7 and 8 http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/piw/&softwareitem=mp-122330-1

  Once all this has been ran & finished, my DVD RW Drive E automatically started the drive & added all the options of the printer & features for printer, Scanner, copier & fax. Everything is now up & running.
  Thank you for your help attempt Distinguished Professor

• Value set with the table type

  Hi all
  I use R12.1.3 EBS. I want to create a value set with the posting type "Table". But I must specify what application will be set and the table to use. I want to refer to an another diet/no apps. Is this possible? I have the link of database between this regime to receivables / via SQL Developer, I'm able to query or manipulate the data.
  
  

  Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
  PL/SQL Release 11.1.0.7.0 - Production
  "CORE     11.1.0.7.0     Production"
  TNS for Linux: Version 11.1.0.7.0 - Production
  NLSRTL Version 11.1.0.7.0 - Production

  Thanks in advance,
  Bahchevanov.

  Create a custom view in the schema of APPS that points to the table in the remote database, and you should be able to create a validated set of values from table based on the custom view. This will require you to create a link of database on the remote database (or a private database link in the APPS schema)

  HTH
  Srini

• Combine queries to get the result set with max Y

  Hello
  I use forms 6i and db 10.2.0.1.0
  
  With the query below

  Select ufam_usrgrp,ufam_filegrp,ufam_read,ufam_write,ufam_overwrite,ufam_delete from usr_file_access_master
  Where ufam_ecode = '0004108';

  the result set is

  UFAM_USRGRP     UFAM_FILEGRP    UFA UFA UFA UFA
  --------------- --------------- --- --- --- ---
  MGMNT           CV              Y   Y   Y   Y
  EMPLOYEE        GENERAL         Y   N   N   N
  EMPLOYEE        PERSONAL        Y   N   N   N

  Another query

  Select uul_usrgrp, ufl_file_grp,ufl_read,ufl_write,ufl_overwrite,ufl_delete from usr_usrgrp_lnk,USRGRP_FILEGRP_LINK
  Where usr_usrgrp_lnk.uul_usrgrp = USRGRP_FILEGRP_LINK.UFL_USR_GRP
  and usr_usrgrp_lnk.uul_ecode = '0004108'

  gives the result

  UUL_USRGRP      UFL_FILE_GRP    UFL UFL UFL UFL
  --------------- --------------- --- --- --- ---
  MGMNT           GENERAL         Y   Y   Y   Y
  EMPLOYEE        GENERAL         Y   Y   N   N
  MGMNT           CV              Y   N   N   N

  I need to combine these two queries to get a separate result set with maximum Y
  
  Like here "MGMNT CV" is repeated in both the result set, but the first has more, then it should come from the combined result set. reverse-case also the same (such as "EMPLOYEE GENERAL")
  
  So I want to combine the queries so that I get the result as set below

  UserGroup       FileGroup       Rd Wrt Owrt Del
  --------------- --------------- --- --- --- ---
  MGMNT           GENERAL         Y   Y   Y   Y
  EMPLOYEE        GENERAL         Y   Y   N   N
  MGMNT           CV              Y   Y   Y   Y
  EMPLOYEE        PERSONAL        Y   N   N   N

  Please help me to combine these queries
  
  Published by: Divya on August 14, 2011 21:24
  Changed the result set and the last exit

  NOT TESTED!

  select y.uul_usrgrp,
         y.ufl_file_grp,
         greatest(ufl_read,nvl(ufam_read,' ')) ufl_read,
         greatest(ufl_write,nvl(ufam_write,' ')) ufl_write,
         greatest(ufl_overwrite,nvl(ufam_overwrite,' ')) ufl_overwrite,
         greatest(ufl_delete,nvl(ufam_delete,' ')) ufl_delete
    from (select ufam_usrgrp,ufam_filegrp,ufam_read,ufam_write,ufam_overwrite,ufam_delete
            from usr_file_access_master
           Where ufam_ecode = '0004108'
         ) x,
         (select uul_usrgrp, ufl_file_grp,ufl_read,ufl_write,ufl_overwrite,ufl_delete
            from usr_usrgrp_lnk,USRGRP_FILEGRP_LINK
           Where usr_usrgrp_lnk.uul_usrgrp = USRGRP_FILEGRP_LINK.UFL_USR_GRP
             and usr_usrgrp_lnk.uul_ecode = '0004108'
         ) y
   where y.uul_usrgrp = x.ufam_usrgrp(+)
     and y.ufl_file_grp = x.ufam_filegrp(+)
  

  Concerning

  Etbin

  Edited by: Etbin on 14.8.2011 13:08
  deleted by group

• Clear labels set with insertLabel()?

  Is it possible complete set with inserLabel() labels so I can make disappear because I do not know what could be the key of the value?

  N ° you can not recover the labels unless you know those keys.

  One thing you can do is to export the document to IDML and check the designmap.xml inside the IDML file for keys.

  --

  tomaxxi

  http://indisnip.WordPress.com/

• ICB does not break breaking set with the code when executing the test test sequence point

  I just started using the testbed and I use it with CVI. I am running version 4.2.1 of testbed.   I'm currently trying to set up my "*.c files" of project folder appropriate to compile and run under the simple testexe of test bench and also tried the normal sequence editor. Currently, I moved all the *.c files &.h taken in charge in the same directory where the testexec.c... .not sure if it's the best place to put it?... It seems to work OK. However, I saw a few problems once the program is running. Is to show signs cited in my CVI functions but it shows as not fatal execution error: "position of unknown source, library function error, Panel, bar menu, control or a table handle is invalid" before and after pop up window panels. I tried breakpoint to the line of code in a CVI file to the project title for additional information about the error, but it seems that the breaking point is not being invoked as it does NOT run in debug in CVI mode and rather an executable. Across the service installed on the project file are *.c and not *.obj. I appreciate anyones help and give me advice. Thanks in advance

  DLL is the only way to interact with code C/C++ in TestStand, Yes.

• WE set with delay

  Hi guys,.

  I am new to LabView, programming as well. What I need is to control with LabView Arduino microcontroller and is nessessery for my diploma. I tried the solution of my problem here in the forum and all over the web, but I'm a bit confused of all this.

  What I do is when it comes to the TRUE value of the sensor, it sets ON an output pin for a deadline (in ms) and after time is managed by, he sets OFF again. I tried with the elapsed time in While loop, but when he doesn't loop with the time running in the main code loop (all looping in while loop)-> main code signs stops until the loop with the passage of time runs out. It's nessessery for me run the main code all the time without delays stop. IM little in blue, so...

  Help, please.

  Thank you very much.. Hanes

  
  

• Step.Limits Set with ActiveX

  Hello

  I work on the development of a VI to create a TestStand sequence based on a set of inputs to an excel file.

  With LabVIEW, I was able to create a new file of sequence and insert a test "LabVIEW digital limit" in the sequence (VI attached for adding new digital step). I don't know how to take this additional numerical limits and put 'Step.Limits.Low' & 'Step.Limits.High '.

  Grateful if someone can let me know if/how this is possible.

  Thank you best regards &,.

  Don1

  PS: Please advise if I should have posted this on the set of LabVIEW.

  With the help of the reference step change for a reference of PropertyObject (Step.AsPropertyObject), then you can change the default values using the PropertyObject.SetValNumber using the search string for "Limits.Low" and "Limits.High".

• Moves the PhoneGap Build project to build local with CLI

  Hello

  I wanted to ask, if someone leaves his BMP project for a local phonegap-cli build machine. If so, any tips are appreciated!

  My build machine is configured correctly, but specifically, I wanted to ask questions about the project structure changes.

  Thanks in advance!

  Config.XML is located in a different place from BMP vs the local CLI. During the conversion of BMPS at local CLI, do something like the following:

  1. create a project using the CLI interface with the same name & ID:

  PhoneGap create test com.example.test test

  2. copy your BMP files in the new directory of the www project:

  CD ./test/www

  CP - r path/to/PGB/files/*.*.

  2. move the www config.xml file to the parent directory:

  config.XML mV... / config. XML

  3. move all the splash/icon resources to the parent directory:

  MV res... /res

  4 edit the config.xml file so that all references (icons/splash) path are correct.

  5. build the app and test, test, test!

  Hope that helps.

• Setting with brushes range is very limited

  I use LR6.6 on my desktop Mac Mini and my Macbook.  Brush the range of adjustments (exposure, contrast, highlights, etc.) is much wider with my Macbook than my Mac Mini desktop.  The two are running the latest version of El Capitan.  If I select "Exposure" when I use the brush for a local fit on my Mac Mini, I can put the cursor up to 4 with only the strict perceptible difference between which the original image.  On my Macbook, 4 goes to very bright (planned) and all other settings seem to work as it should.  I installed another copy of LR, but the result is the same.

  Can not understand this one.  I hope someone here can help.  Thank you!

  -Steve

  Makes the density & speed are set to 100:

  

• Page setting with kSetPageCmdBoss crash InDesign when two docs open...

  Hello

  I have a strange problem here - I have a function to make a page in the page document, I use the kSetPageCmdBoss here. I think the code is from a sample, or on the forum and I use it for a long time. I call this function of my plugin and it works very well if only one document is open.

  Now, I found a problem when multiple documents are open. I am using our plugin as usual, I use the function to activate the pages and when I close my InDesign document crashed. I searched already a day to find that the problem is in this function and another day to understand why this happens. But at the moment I have no idea...

  The source code of my function is less to-when I don't call this function, it works with more than one document. When I call, InDesign has crashed.

  Anyone see the problem I do not see?

  Or y at - it another way to make a page in the page document active?

  Thank you

  Klaus

  // ----------------------------------------------------------------------------------------------------------
  // active an page in the active document
  UIDRef activatePage( IDocument* pDocument , int32 page ) {
       UIDRef UIDRefPage;
       if( pDocument != nil ) {
            IDataBase* db = ::GetDataBase( pDocument );
            if( db != nil ) {
                 InterfacePtr pageList(pDocument, IID_IPAGELIST);
                 if( pageList != nil ) {
                      //Get UID of Pagenumber 
                      UID UIDPage=pageList->GetNthPageUID( page ); 
                      if( UIDPage != 0 ) {
                           //Get UIDRef of Pagenumber 
                           UIDRef newRef(db, UIDPage); 
                           UIDRefPage = newRef;
                           if( UIDRefPage != 0 ) {
                                //Get Pages Layer 
                                InterfacePtr pageHierarchy(UIDRefPage,UseDefaultIID());
                                if( pageHierarchy != nil ) {
  
                                     InterfacePtr spread(db,pageHierarchy->GetSpreadUID(),UseDefaultIID());
  
                                     // create the command 
                                     InterfacePtr setPageCmd(CmdUtils::CreateCommand(kSetPageCmdBoss)); 
  
                                     // get UIDRef of the document 
                                     UIDRef documentUIDRef = ::GetUIDRef((IPMUnknown*) pDocument); 
                                     setPageCmd->SetItemList(UIDList(spread)); 
  
                                     // create layoutcmddata and get parameters 
                                     InterfacePtr layoutCmdData(setPageCmd, UseDefaultIID()); 
                                     InterfacePtr layoutControlData(Utils()->QueryFrontLayoutData(), UseDefaultIID()); 
                                     layoutCmdData->Set(documentUIDRef, layoutControlData); 
  
                                     // create the uidData 
                                     InterfacePtr uidData(setPageCmd, UseDefaultIID()); 
                                     uidData->Set(UIDRefPage); 
  
                                     // process command 
                                     CmdUtils::ProcessCommand(setPageCmd);
                                } // pageHierarchy != nil
                           } // UIDRefPage != 0
                      } // UIDPage != 0
                 } // pageList != nil
            } // db != nil
       } // pDocument != nil
       return UIDRefPage;
  }

  Hi Klaus,

  you call QueryFrontLayoutData(), but the given document may be another. It is best to call QueryLayoutData() with the presentation before most of the document, as you can get with IDocumentUIUtils.

  Markus

• Several data sets with SetFieldValues

  Here is a simplified version of what I'm trying to do.

  I have two drop-down menus. Each has 3 different options.

  • Drop 1 - Apple, banana, strawberry.
  • 2 - clock, window, door drop.

  I have a field of text next to each drop down.

  • Drop-down list 1 - 'colorfield' is the name of the corresponding text field
  • 2 - drop "shapefield" is the name of the corresponding text field

  I want that text from the fields to fill what is selected in the drop-down lists. I can get everyone to work separately, but when I add the script for both, only continues to operate.

  Here's what I have.

  Doc Javascript

  // Data Set 1
  var oneData = {
         "Apple": {
          color: "red"
      },
          "Banana": {
          color: "yellow"
      },
          "Strawberry": {
          color: "red"
      },
    };
  // Data Set 2
  var twoData = {
          "Clock": {
          shape: "round"
      },
          "Window": {
          shape: "square"
      },
          "Door": {
          shape: "rectangle"
      },
   };
  // Populate fields function 1    
  function SetFieldValues(fruit) {
      this.getField("colorfield").value = oneData[fruit].color;
  }
  // Populate fields function 2    
  function SetFieldValues(objects) {
      this.getField("shapefield").value = twoData[objects].shape;
  }
  

  Custom script knocks on combo 1

  if (event.willCommit) {
      if (event.value == " ") this.resetForm(["colorfield"]);
      else SetFieldValues(event.value);
  }
  

  Custom script knocks on combo 2

  if (event.willCommit) {
      if (event.value == " ") this.resetForm(["shapefield"]);
      else SetFieldValues(event.value);
  }
  

  Thank you!

  There is a reason, it is not a name of keyword that already exist, the computer program is not smart enough to determine who you mean. It goes the same for function names. You have 2 functions with exactly the same name but each run another block of code. The usual way that a program solves this dilemma is to use the last definition of the function. You must uniquely name functions of your "SetFieldValues".

• Can break the link is no longer a NIC with CLI 4.1

  I've recently upgraded to 4.1 CLI (VMware vSphere CLI - 4.1.0 - 254719.exe) and I found that the command to disable a vswitch network card no longer works. If I go down to CLI 4.0 U2 (VMware vSphere CLI - 4.0.0 - 253290.exe) the command works again.

  Is the command that I am trying

  vicfg - vswitch.pl - unlink vSwitch0 vmnic3

  Under the 4.1 CLI it returns no error, it just says:

  Update of uplinks: vmnic1, vmnic0, vmnic2, vmnic3

  and vmnic3 remains linked to vSwitch0. If I go down to 4.0U2 CLI the command works as expected and vmnic3 is dissociated. The command to bind a network card for a vswitch works well under both versions of the CLI.

  I've been through the upgrade/downgrade with the CLI cycle a couple of times and got consistent results. Anyone confirm that NIC untie is today broken with CLI4.1

  Details

  Running CLI on Windows 7 64 bit against a host ESX 4.0U2

  The reason why this happens is a problem with the input that is passed into the splice of the Perl operator. Looking at the source between 4.0 and 4.1, looks like they were a bug fixing and looks like they change the wrong section of the code.

  excerpt from esxcfg-vswitch 4.0 to disassociate a teddy bear:

  If ($bridge-> isa ('HostVirtualSwitchBondBridge')) {}
  If {($add)
  Push (@{$bridge-> {nicDevice}}, $pnic);
  } else {}
  my $size = @{$bridge-> {nicDevice}};
  for (my $i = 0; $i<$size; $i++)="">
  If {($bridge-> {nicDevice}-> [$i] eq «$pnic»)}
  Splice (@{$bridge-> {nicDevice}}, $i, 1);
  last;
  }
  }
  If (@{$bridge-> {nicDevice}} == 0) {}
  Delete $vs-> {spec}-> {bridge};
  }
  }

  excerpt from esxcfg-vswitch 4.1 to disassociate a teddy bear:

  bug # 376670
  If ($bridge-> isa ('HostVirtualSwitchBondBridge')) {}
  If {($add)
  Push (@{$bridge-> {nicDevice}}, $pnic);
  } else {}
  my $size = @{$bridge-> {nicDevice}};
  for (my $i = 0; $i<$size; $i++)="">
  If {($bridge-> {nicDevice}-> [$i] eq «$pnic»)}
  Splice (@{$bridge-> {nicDevice}}, $i, 0);
  last;
  }
  }
  If (@{$bridge-> {nicDevice}} == 1) {}
  Delete $vs-> {spec}-> {bridge};
  }
  }
  }

  It is the junction takes 3 arguments, a table for arg [0], in compensated for arg [1] and the number of items to remove from arg [2]. If you look at the updated code 4.1, change the number of items removed from 1 to 0. This causes the change table draw and so you see that no vmnic is removed. If you change from 0 to 1, you will have the problem solved.

  What is even more surprising is where VMware has decided to change the code... If you look at the next 'if' statement, he said if there is 1 left vmnic of the table, go ahead and deleted... which is not what we want. The change should have been if we have 0 vmnic in the table, then the user must mean deleted the vSwitch and it looks like VMware engineers made the change in the wrong place.

  If there is value to vCLI 4.1 to take advantage of the new vSphere 4.1 capabliteis, this is the only change you need to do until VMware offers a real solution.

• Error 1119: Access of a property may not set with a keyboard event

  Scene 1, Layer 'layer 1', frame 1, line 5.	1119: access of property may be undefined LEFT through a reference with static type class.
  Scene 1, Layer 'layer 1', frame 1, line 6.	1119: access of property may not set down through a reference with static type class.
  Scene 1, Layer 'layer 1', frame 1, line 7.	1119: access of possibly undefined property BACK through a reference with static type class.
  Scene 1, Layer 'layer 1', frame 1, line 8.	1119: access of property may not set through a reference with static type class.

  I think that to have public but do not know how the value Keyboard.Event.LEFT, UP, DOWN, RIGHT.

  import flash.events.KeyboardEvent;

  stage.addEventListener (KeyboardEvent.LEFT, characterMove);

  stage.addEventListener (KeyboardEvent.DOWN, characterMove); ------Headphones of events for left keyboard etc.

  stage.addEventListener (KeyboardEvent.UP, characterMove);

  stage.addEventListener (KeyboardEvent.RIGHT, characterMove);

  new audience; function characterMove(evt:KeyboardEvent):void {------function to move the person}

  Switch (evt.keyCode) {}

  case Keyboard.LEFT:

  Person.x-= 20;

  case Keyboard.RIGHT:

  Person.x += 20;

  case Keyboard.DOWN:

  Person.y-= 20;

  case Keyboard.UP:

  Person.y += 20;

  by default:

  trace ("keyboard event error")

  }

  }

  Your listeners must specify KeyboardEvents and upward, DOWN, LEFT, RIGHT aren't KeyboardEvents, they are key keyboard codes.  Using KEY_UP and KEY_DOWN instead of each of them in the headphones.

• How to create a new action Set with script?

  Is this possible?

  I managed to go full screen and full screen with 1 second interval in the actions of the output.

  But I can't seem to create a temporary folder SET for the action menu item Insertion

  Here are the scripts:

  = Open fullscreen =.

  var idslct = charIDToTypeID ("TPCV");

  var desc9 = new ActionDescriptor();

  var idnull = charIDToTypeID ("null");

  var ref8 = new ActionReference();

  idMn var = charIDToTypeID ("min");

  var idMnIt = charIDToTypeID ("MnIt");

  var idscreenModeFullScreen = stringIDToTypeID ("screenModeFullScreen");

  Ref8.putEnumerated (idMn, idMnIt, idscreenModeFullScreen);

  desc9.putReference (idnull, ref8);

  executeAction (idslct, desc9, DialogModes.NO);

  wait 1 second

  $.sleep (1000);

  = of fullscreen =.

  var idslct = charIDToTypeID ("TPCV");

  var desc6 = new ActionDescriptor();

  var idnull = charIDToTypeID ("null");

  ref5 var = new ActionReference();

  idMn var = charIDToTypeID ("min");

  var idMnIt = charIDToTypeID ("MnIt");

  var idscreenModeStandard = stringIDToTypeID ("screenModeStandard");

  ref5.putEnumerated (idMn, idMnIt, idscreenModeStandard);

  desc6.putReference (idnull, ref5);

  executeAction (idslct, desc6, DialogModes.NO);

  = actions clear game 1 =.

  var idDlt = charIDToTypeID ("Dlt");

  var desc7 = new ActionDescriptor();

  var idnull = charIDToTypeID ("null");

  ref6 var = new ActionReference();

  var idASet = charIDToTypeID ("ASet");

  Ref6.putName (idASet, 'Set 1');

  desc7.putReference (idnull, ref6);

  executeAction (idDlt, desc7, DialogModes.NO);

  App.Refresh)