Apex graphic flash warning message

Similar Questions

• Apex graphics Flash - additional Documentation?

  Anyone know where I can find additional documentation on the parameters of the Apex graphic Flash?
  
  Specifically what I would do is to make the labels in my Camembert cheese roll and, once packed, be centered. I have a few long labels which are limited to the left or to the right. I would like to be able to display wrapped when they are too long and be perfectly justified to Center. I guess I have to play with the XML code in the attributes of table but I can't seem to find any documentation on the parameters.
  
  Thank you
  John

  Hi John,.

  Apex uses AnyChart for their flash cards. You can find the documentation here: http://www.anychart.com/products/anychart/docs/

  Note that the current version of APEX uses an older version of AnyChart. Because of the license agreement, you can use the version updated for the specified AnyChart maps (I think report interactive graphics are already using the latest version)

  Martin

• HP m6-1002tx with AMD Radeon 7670 m flashing the message «Not installed driver AMD» getting started

  HP Pavilion m6-1002tx with AMD Radeon 7670 m(2B) Graphics flashing the message at startup of the system "not installed for driver AMD.

  Catalyst Control also does not work

  I tried to install the driver again but to no avail

  What happens after I updated my driver via HP Support Assistant

  Help, please

  Hello

  See if the following procedure helps you.

  First, download the latest installer AMD on the following link and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56948.exe

  Then, open windows control panel, open programs and features, right-click on the 'AMD Catalyst Install Manager' entry and select the change option.

  Now, follow the procedure to uninstall the drivers and all the software from AMD.  At the end of this process, you will also get a prompt asking you if you want to remove the Catalyst Install Manager - select the option to remove it and when finished, restart the laptop.

  When windows has reloaded, open your download folder, right click on the installer AMD and select "Run as Administrator" to launch the installation.

  Once again, when this has completed, restart the laptop.

  Kind regards

  DP - K

• Catalyst Control Center warning message

  Every time my computer starts up, I get a warning message that says: "the Catalyst Control Center is not supported by the version of the driver for your compatible graphics card.  If you please update your ATI graphics driver or enable your ATI card using the display manager. "How can I solve this?

  Hi zawgirlz,

  Thank you for using the Microsoft Windows Vista Forums.

  You must update the driver for your graphics from the link below to solve your problem.

  http://ATI.AMD.com/support/driver.html

  If this does not work, contact the manufacturer of your computer.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK.TP

• Apex graphics and IFRAME:

  Hello

  Apex Version: 4.2.2.00.11

  DB: Oracle 11g Enterprise Edition R 11.2.0.3.0

  Listener of the apex: 2.x

  I got an obligation to create a simple dashboard with graphs and reports in the dashboard page. The page will have several charts and reports. As a result, in, click on the links in the table or the State, we need to dig other graphics / reports. For example if we have a chart for sales by year, click on a year, he must navigate to another "Monthly sales" chart for that year.

  To achieve this, we decided to create charts on individual pages and the dashboard page will have areas which the content will be rendered in an IFRAME, so that each table is then rendered in those iframes. Regions with iframes works well, , however we have a strange question that not all graphs are displayed in iframes. It restores a single chart, and for the other graphics it displays the message "no data found". Its also strange randomly displays the chart. Sometimes, it displays the first and no data message to the rest of the cards, once, paragraph2 poster, but not all the. Could not get all the information of the apex of the debug messages also.

  I experienced this in apex.oracle.com in the same way, here it works. Created two regions whose content will be generated thro a link in an iframe.

  https://Apex.Oracle.com/pls/Apex/f?p=58473:4

  Work space: experiment

  username: USABI

  password: USABIchart14

  Can we have an idea where the problem is?

  You help will be very appreciated.

  Natarajan

  I could solve the problem. The Iframes used different session for the URL, so the question ID. Changed to use the same session ID, now it works well.

  (BTW, a way to give points for my own solution)?

  Kind regards

  Natarajan

• Button or click the button of step 2 warning message

  We have a screen in an APEX application where a user can click on a button that calls a backend package PL/SQL procedure to process the data.

  Users have asked if we can add a warning message when the user clicks the button the first time, obliging so to decide and click a second time to actually go through with it.

  Does anyone have an idea on how this could be done? Easy the better of course.

  Unfortunately, none of my APEX books have any information on how to do it.

  Any help would be appreciated.

  I'm sorry that I couldn't remember which version it became available.

  Maybe just try a simple Javascript confirmation popup? There are a few blogs out there with precision.

  for example:http://www.oosterhoef.nl/blog/index.php/2009/09/javascript-confirmation-popup-in-apex/

• rounding to a graphic flash

  Hello
  I created a flash chart using a simple application.
  The table works fine only my values are rounded to full (full) numbers.
  
  Is there a way to round to two digits?
  
  I tried round(column,2) value but does not work.
  
  Any ideas?
  
  Best regards Erik

  Hi Erik,

  To help solve your problem, could you please give some more information -

  * What APEX version do you use?
  Create diagram you what?

  When you change your chart, go to the page attributes of table and scroll to "Settings main" region. You should see an item called "decimal", where you can enter the number of decimal places that you want to display the values on your chart. Set the decimal value e.g. value * 2 *, then click on apply changes. When you run the graph, your values should appear, with two decimal places. Please note that for pie charts, the decimal element is visible on the region to "display settings."

  If your page attributes of table has no a question of numbers after the decimal, then you need to use custom XML to apply this setting to your graphic. The XML code required to do this depends on the version of the APEX and Flash graphics you use. For example, if you use APEX 3.2 or earlier, Flash cards are AnyChart version 3.3 and the XML required will look something similar to the following:

  
    
    .
    .
  
  

  .. where you can see the decimal_places = '2' attribute is defining the number of decimals to 2.

  If you use APEX 4.0/4.0.1/4.0.2, then Flash cards are AnyChart version 5.1.3 and the required XML code will look something similar to the following:

  
    
      {%Name}{enabled:False} - {%Value}{numDecimals:2,decimalSeparator:.,thousandsSeparator:\,}
    
    
    
  
  

  .. where you can see the numDecimals:2 attribute is defining the number of decimals to 2.

  I hope this helps.
  Kind regards
  Hilary

• need help... get a warning message

  If I'm working on a project for school.  I was working on the script for her action, and I get this warning message "warngin: the name of the"photoshop"instance is declared on an object of type flash.display.SimpleButton but there is a conflicting use of the instance name"photoshop"on an object of type falsh.display.MovieClip.

  Ive been trying to solve this for a while and can not understand.   any help would be appreciated.  Thank you

  Use the Explorer to film looking for photoshop.  you have this name applied to two different objects.

• Clear the cache with graphic flash

  Hi all
  
  On a menu, I have a graphic flash with a link to goto page xx
  The url in the link have the clear cache attributes defined for the same page xx.
  
  on the same page of the menu, I also provide a list with an option for even goto page xx
  f? p = 103:2:815028013919804:NO:2:
  
  
  Now the question
  When you use the menu list of the cache is disabled
  When you use the graphic flash cache is not authorized!
  
  Some body have an idea how it works?
  
  Hugo Perfors

  I think that it is a problem of IE. Try to change the caching there options to see if it happens after that. I think that if you are using FF it won't happen.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------

• Has had a phone call saying that my computer has sent warning messages. They want to guide me through the changes to stop the problem. Is it a scam?

  Has had a phone call saying that my computer has sent warning messages. They want to guide me through the changes to stop the problem. Is it a scam?

  It's a scam. Give them nothing.
  Contact your local police.

• Warning message that we had been hacked.

  We have 10.7.5 we received a message that the system had been hacked and we should call it an 877 number to talk to the Apple support.  I turned the computer off for the night. Today, when restarting the message was gone.  I was able to run Sophos Anti-virus that does no threats.  Does this sound familiar to others?  Is it a scam?  What should I do when I get a warning message?

  It is a SCAM, never all pay attention to these messages. In addition, uninstall Sophos following the instructions of developers. OS X has no need of the AV, cleaning or ANY, repeat ANY utility of third maintenance party. OS X is extremely secure and performs better if left totally alone. Sophos at best worthless and at worst will cause problems with your system.

  Also please read Phony 'technical support' / 'ransomware' popups and web pages

• Cannot disable warning messages, preferences of french I tried on: confing. Messages always appear. Please advice.

  Using version 19.0.2 on Mac Firefox. The message: "this page is encrypted, the information you entered will be sent over an unencrypted connection and could easily be read by a third party.
  "Are you sure you want to continue sending this information?"
  In the preferences there is no option to choose what the warning messages appear or not.
  By topic: config tried to change security.warn is set to "false" by default. Security.warn_viewing_mixed - too defined by default to 'false '.

  Hello helga, because of its security implications this warning cannot be disabled.

• How to find the window of warning messages in Firefox 10.0.2?

  For some reason any (I disabled something I didn't), I need to find the section settings for the browser Warning Messages; However, when I go to Tools - Options - Security, is there no warning Messages section. Could someone let me know where to look for it?

  Thank you.

  The settings for warning messages have been removed from the UI (Bug 513166).

  You must change preferences related security.warn_* directly on the topic: config page.
  
  Filter: security.warn

  • http://KB.mozillazine.org/about:config

• warning message appears

  I'm defining the PROMPT for MIXED CONTENT. However, the PARAMETERS of warning MESSAGES is not displayed when I go into OPTIONS > SECURITY

  The parameters of the warning Messages has been removed from the Security section in Firefox 4, these parameters must be accessible through Subject: config now. Looks like you are looking for one last in the list below "parameters of the former in Firefox 3.6 on the Security Panel.

  See: http://kb.mozillazine.org/About:config

  1. type of topic: config in the URL bar and press the Enter key.
  2. If you see a cautionary, accept it (promise to be careful)
  3. Filter = security.warn_
  4. Double-click the pref in the lower panel on the subject: config display to toggle to true or false according to the descriptions below (scroll down to security.warn to see these particular preferences)
     • http://kb.mozillazine.org/About:config_entries #Security.

  Parameters of the ancients in Firefox 3.6 on the Security Panel
  
  Display a dialog warning when:

  • I'm about to view an encrypted page
    • Pref: security.warn_entering_secure
  • I'm about to view a page that uses low-grade encryption
    • Pref: security.warn_entering_weak
  • I leave a page encrypted to one that is not encrypted
    • Pref: security.warn_leaving_secure
  • I submit, information that is not encrypted
    • Pref: security.warn_submit_insecure
  • I'm about to view an encrypted page that contains unencrypted information
    • Pref: security.warn_viewing_mixed

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• How can I change the settings on Firefox 5 Warning Messages?

  I wonder why the options to turn these warning messages whenever you enter or leave an encrypted page, etc., are more included in this version. Is it still possible to rework her these settings with Firefox 5?

  The settings for warning messages have been removed from the UI (Bug 513166).
  
  You must change preferences related security.warn_* directly on the topic: config page.
  
  Filter: security.warn

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed see the bold (user set).
  • Preferences you can restore the default value or change via the context menu.

  You can alternate Boolean prefs with a double click.