DataDelAll associated command to change DATAFILECODE to "ANSI" to "unicode".

Similar Questions

• If I rename a clip in the body, is there a command to change the file name as in FCP7?

  In FCP7 I could rename a clip in final cut PRO, and then use a menu command to change the real file name to match:

  

  I can do this in body or prelude?

  Thank you!

  MtD

  This option is only available in the project manager.

  FEATURE request

• What command to change the number of ports for vSwitch0?

  I develop kickstart to deploy ESX4 U1 to upgrade our 100 ESX 3.5 servers. After trying for a day, I had almost all of this work. The problem is vSwitch0 is created with only 32 ports. Can I use vi client to change the port number after, but it is nice to have everything using kickstart.

  Y at - it a command to change the number of ports for vSwitch0? I know that you can create a new vswitch port num vSwitch, but not for vSwitch0 created during installation.

  For those using pxe and start problem with no. cos NIC added by the user, it is not a real error message, press Alt + F1 to display the actual error message, it should tell you what the problem is.

  Thank you

  I have it in my postconfig:

  Perl-pi-e w /------/ NET/vswitch\/child\ [0000\] \/numPorts = \"\d+\"/\/net\/vswitch\/child\[0000\]\/numPorts = \"256\"/g;' /etc/vmware/esx.conf

  Ben

• Command to change the semantics BYTE char to a table column

  DB version: 10 gr 2
  
  I know that he is an ALTER TABLE TableName CHANGE command to change the NLS_LENGTH_SEMANTICS for a table column.
  
  I need to change column of the table EMP of Ename and TANK job. How can I do this with an ALTER command?
  

  SQL>col data_Type format a12
  SQL>col column_name format a10
  SQL>
  SQL>select COLUMN_NAME, DATA_TYPE,DATA_LENGTH, CHAR_LENGTH,CHAR_USED
    2  from dba_tab_columns
    3  where table_name='EMP' and owner = 'SCOTT';
  
  COLUMN_NAM DATA_TYPE    DATA_LENGTH CHAR_LENGTH C
  ---------- ------------ ----------- ----------- -
  EMPNO      NUMBER                22           0
  ENAME      VARCHAR2              10          10 B
  JOB        VARCHAR2               9           9 B
  MGR        NUMBER                22           0
  HIREDATE   DATE                   7           0
  SAL        NUMBER                22           0
  COMM       NUMBER                22           0
  DEPTNO     NUMBER                22           0
  
  8 rows selected.

  Try

  alter table emp modify (ename varchar2(10 char), job varchar2(9 char));
  

• Terminal command to change the wallpaper does not

  I recently did a program that changed my desktop wallpaper according to the time of day.  He worked by entering a terminal command that looked like something like this:

  osascript-e ' tell application "Finder" to the image of the desktop value "/ path/to/file.jpg" as a POSIX file '

  It was working fine, until recently.  Now when I enter the command to define 'fichier.jpg', it works, and defines it as my desktop background as it is supposed to, but when I replace it with a new image of the same name and path, the command affects my wallpaper the original image of the same name.  When I went to change my wallpaper in system preferences, it showed in my new defined image preview area, even if it wasn't.  I'm doing something wrong or is there a problem with my Mac?

  osascript-e ' tell application "Finder" to set the image of the Office of POSIX file "/ path/to/image.jpg" '

  On OS X 10.11.6 and by operating in the Terminal, the foregoing has changed the image of the office immediately whenever it is run with a new image.

• My Apple TV Remote no longer meets the high command. Change the battery and restarting did to help. Anyone have any ideas?

  How can I fix an Apple TV Remote that has stopped responding to the command "up"? It works otherwise, but do not be able to scroll to the top is awkward. I tried to change the battery and restart.

  Money or Siri remote? How old is it? He fell on a hard surface?

  TT2

• Command to change CPU and carrots

  I am trying automate cross country the number of processors and Cores for a virtual computer when recovered by SRM.  Currently, it is a manual operation when you test a recovery plan which has a virtual machine with 2 x 6 core CPU.  We must go and change to 4 cores instead of 6 for the virtual machine can be powered on the recovering site.

  I tried this

  Get - VM WEB1 | Set-VM - numcpu 1 - confirm: $FALSE

  This makes only 1 CPU, although I have 6 hearts, its core would be only 1.  Also, I get an error when you look at the parameters of the machine virtual recovered, something to the effect as 'the number of hearts should exceed the number of processors' which is wrong, I have a lot of single CPU, multi-core VM in my environment.

  I tried numcpu - 2 or - numcpu 4 and neither touch the basic configuration, so the machine does not illuminate.

  Looking for a single line I put in my script that modifies the memory to no longer run my site of DR 'spare tire '.

  Take a look at 1. Re: powercli command to add a CPU processor cores?  

• command line change VLAN ID in virtual switch

  The trunk on our central office switch port has been changed. So now, I can't reach my esx server in virtual center.

  I would like to change the VLAN ID of the service on the virtual switch to 500 console.

  Anyone know which command I should use.

  THX

  Rik (Belgium)

  go to the server and type: esxcfg-vswitch vSwitch0 Pei "Service Console" - v 500

  Duncan

  Blogs: http://www.yellow-bricks.com

  If you find this information useful, please give points to "correct" or "useful".

• When the default is uppercase, which is command to change to lower case on smart keyboard

  What is the command to switch to uppercase lowercase on smart keyboard

  Hey Glenn26,

  The smart keyboard is a great accessory and very convenient to use.

  You must pass between upper case and lower case as well as on a standard keyboard. You can hold down the SHIFT key, or press the SHIFT key.

  See you soon.

• British keyboard commands have changed

  Recently, I noticed on my Macbook Pro (running El Capitan 10.11.4) 2011 beginning British keyboard, I can make more the euro (€) symbol or the accent acute/Irish/Gaelic fada ('') using the down option.

  Option + 2 now gives me™ where it used to give me the euro symbol, and option + vowel now gives me a circumflex (e.g. i) where it is used to give me the treble.

  I don't know when it started, but I wonder if it was caused by an update, as I have not changed it parameters. Can someone tell me how to solve this problem and return my option controls how they were before?

  Looks like you have the active US keyboard. Check preferences-> keyboard-> input Source System.

• Any command to change the coarse user batch file?

  I would like to know about any command to switch users using the batch file.

  Does anyone have any suggestions?
  Thanks in advance for your suggestions

  Hello

  Thanks for posting your query on the Microsoft Community.

  We have a support forum dedicated to systems on these issues, I suggest you to post your query on the Microsoft Developer Community for that matter. You can get more effective suggestions and adapted by experts familiar with this topic.

  Please visit the link below to find a community that will support what ask you:

  Microsoft Developer Network

  http://social.msdn.Microsoft.com/forums/en-us/a87b39d6-17c6-4AA5-93d3-7610ab257796/how-to-create-batch-file-MSI?Forum=netfxcompact

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

  Thank you

• file associations .exe has changed for Windows Media Center.

  Original title:

  Windows Media Center has modified the parameters of my computer - HELP

  Windows Media Center has changed my .exe (for word, excel, e-mail, internet etc etc, my anti-virus is turned off

  How can I get rid of WMC and put back how it was. He also changed config.sys so that I can not correct.

  It won't let me even restore to an earlier time?

  When I try to go to word, excel etc for the Windows Media Center screen opens and nothing else.

  Help!

  Hello
  
  1. what happens when you try to perform a system restore?
  2 have. what changes you seen in config.sys? What is the exact location of the config.sys?
  3 did you changes to the computer before the show?
  You can try the steps from the following link and check if it works:
  When you open a file on a Windows-based computer, the file may start another program
  http://support.Microsoft.com/kb/2656106

  You can also visit this link and check if it helps:
  Change the programs that Windows uses by default
  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default
  Let us know the result!

• WLST command to change 'urlerror401' in oam-config. XML

  Hi all

  We have an obligation to change a URL parameter in oam - config.Xml. The name of the property is "urlerror401" oam-file config.Xml. we order WLST to make this change, because if change us it manually in oam - config.xml - we cannot bring the full domain of OAM.

  Please suggest.

  Thank you.

  Shivam

  Try running wlst.sh under common Oracle_IDM1

• Error: Command to change from KM or procedure steps

  Hello
  
  Recently, the it Department installed latest version of ODI 10.1.3.5.6
  
  I noticed that when I want to change the order of steps in procedure (or crans KM), I can't save the changes.
  The result is an error: ORA-00001: unique constraint (ODI_WORK. PK_LINE_TRT) violated
  
  Does anyone else have this problem?
  
  See you soon,.
  Rudy

  Hi Rudy,.

  You meet BUG 9278199 - MOVING PROCEDURE STEPS from TOP TO DOWN no IS NOT POSSIBLE
  It is introduced in 10.1.3.5.5 and not yet set at 10.1.3.5.6.

  This Bug is fixed in ODI 11 g and there would soon be a single at the top of 10.1.3.5.6 patch

  Thank you
  Fati

• How to change Touchpad HP fonts to Unicode?

  Hi, I recently bought a touchpad and I noticed that some of the websites the letters are not displayed correctly (Asian languages). This is because the police of touchpad HP is not unicode by default. My question is how can I change the Unicode fonts? Thank you all

  Hello

  If you know the fonts you need, you can use WebOSQuickInstall to add.

  You can google to get this software.

  When you are in the window of WebOs Quickinstall

  Go to tools

  go to Linux Commandline

  that will lead you to the comand window, so you can save your fonts

  Thus, as copy fonts in/usr/share/fonts /.

  where the fonts should be.

  When you are finished. Just type: reboot

  It will restart your touchpad.

  Caveat!  your policy might cause your touchpad to freeze, you can use

  WebOSDoctor re - install.

  Here's the link for how to make Vietnamese unicode fonts (you can substitute with your Asian language fonts)

  Good luck!.

  http://www.Tinhte.vn/Hoi-DAP-Chia-se-Kinh-Nghiem-331/Tieng-Viet-Cho-WebOS-3-0-2-final-update-Chep-Xem-XOA-font-819453/