API Java IOM silently ignores accounts like enable/disable/revoke operations

Similar Questions

• API JAVA IOM

  Hello
  
  I created a utility class in eclipse using the IOM APIs... now I want to use the method of this class in one of the adapters of tha. How do I create the jar file to be placed in the folder java tasks...
  
  to add on:
  the class I created is for the comparison of the user and the State of the resource... there not a great method... She takes two parameters and returns a Boolean value. I'm not able to run this java application on edipse. I'm missing something. How can I use this class in the console design IOM (tasks adapter)
  
  Edited by: Nelly Saluja on March 4, 2010 21:37

  I don't have eclipse now, but he strongly recommend reviewing how to create jar files ;) Eclipse

• Silent mode - how to enable / disable?

  This seems to be something obvious, but under 'silent mode' in the settings, I see nothing that simply says 'on' or 'off' - there are some complicated settings to the 'exceptions', & for silent mode for time turns; but I want just a quick & simple way to start!

  It seems to be on anyway, as I have placed high enough volume of the ringtone, but the phone doesn't ring - it is not vibrate which is reaslly boring I am missing calls.

  Can someone explain how to turn on the silent & off mode please and explain why the phone rings even if the volume is high enough? Normally, when you do this it should overrride silent mode even if it is on.

  Thank you!

  No, if you simply update

  But, in this case with a major upgrade system, it is well advised to do a UPDATE OWN, so everything should be good to the following

• I installed java and active. But some shoeing that java applications are not installed and enabled.

  I use ubuntu 12.04. I installed java inside. In firefox also I activated it. But some allplicatios like keepvid showing that java is not installed or not enabled. Done all the priliminary troubulshootings as verification of restart and everything

  Hello

  Try checking your version of plugins:

  • Check plugins

  I don't see Java installed on your computer also.
  Where's the installer?

  • Java.com.

  Also:
  Try going to Subject: config search plugin.state.java and change its truevalue, too, go to Tools > > Addons > > Plugins and look for Java and change his option still active or have active

  • Subject: config

• JavaScript does not work although Java has been installed correctly and enabled javascript in the menu options. Surprisignly javascript works fine in Internet Explorer.

  I installed FireFox 3.6.9 and after while JavaScript began to malfunction, even if I have the latest Java installed (Java 6 Update 21) and JavaScript enabled in my Options menu. I tried already several times to reinstall Java and Firefox as well, but nothing helps, the Firefox browser still don't know the java installed. I am running Windows Vista. I had the same problem once a long time ago, but don't remember, how I solve it. Otherwise, I was really happy with Firefox and wishes to continue to use it, however, without Javascript runs it's useless.

  To avoid confusion: http://kb.mozillazine.org/JavaScript_is_not_Java

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).

  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

• How to show the IOM application instance account password in the user interface

  Hello

  I would like to see IOM application instance account password.

  In OPAM, there is a "show password" button.

  Is it possible to do the same thing in IOM? If so, how?

  TIA

  Leo

  Customized using managed beans sound possible, you can try something similar to the example below:

  IOM Managed Bean example: password reset custom

  http://oraclestack.blogspot.in/2014/12/OIM-managed-bean-example-custom.html

  Or if its requirement quite normal for all users, it must be visible, then you can create a new field in your form to process and fill in the application form as pop prerequisite. But this is not recommended.

  ~ J

• Why Search = depth = does not not to /API/REST/1.0/data/accounts?

  I see missing fieldValues can only be [] between two API calls which should be equivalent.

  When I do this:

  https://secure.Eloqua.com/API/rest/1.0/data/account/1250532

  I recover my account 1250532 with fieldValues can only be [] populated as expected.

  But if I do this:

  https://secure.Eloqua.com/API/rest/1.0/data/accounts?page=1 & count = 5 & depth = full & Search = ID % 3D1250532

  I'll be back only

  ..., 'fieldValues can only be': [],...

  Although I specified depth = complete (in fact, in the returned JSON, I see..., 'depth': 'complete',...). Now that I look closer, I also discovered that I have retrieve multiple records - I get five records, which is my & count = value, when the search clause must return only one who has the corresponding id.

  Now, do exactly the same thing for the campaign or Contact fills fieldValues can only be [] for the available URI or URI research.

  Can someone explain why the search API for accounts does not always?

  Hi Tony,.

  Looks like you've identified a bug in the endpoint of accounts and the way it handles the depth argument.

  You can work around this by using the 2.0 end point: https://...API/REST/2.0/data/account/{identifier}

  Please note that version 2.0 of the API is subject to change. Hope this helps and please let us know if you have any questions.

  Thank you

  Fred

• Y at - it no vCloud API Java, who can give me the pool of the external IP address list for a particular network of org. ?

  Hello

  I've implemented vCloud Director on my network, when I create an organization network that is NAT-Routed I give him a pool of external IP addresses.

  My Question is that when an organization network is deleted what is happening with this pool of IP, how can retrieve us these IP address.

  Y at - it no vCloud API Java, who can give me the pool of the external IP address list for a particular network of org. ?

  Kind regards

  SachinJ

  Check the examples 6-10 and 6-11 in the vCloud API Programming Guide ("' an Administrative organization network overview").

  Although the 6-11 is abbreviated, 6-10 seems to suggest that the AllocatedIpAddresses element may contain what you are looking for.

  http://pubs.VMware.com/vCloud-API-1/vCloud_API_Guide_Admin.8.7.html#1039433

  I don't know how the Java SDK surfaces this information.

• How can I enable disable Activity Manager?

  How can I enable disable Activity Manager?

  General information:
  The activity Manager records all interactions between Thunderbird and your e-mail in one place provider. There is no guesswork more. Just look in one place to see what's going on with your email.
  Activity Manager allows you to follow more closely what is happening in the system and what activities are currently performed (for example, synchronization of folders offline IMAP, download new POP messages). The info in the status bar may appear and disappear quickly sometimes before able to read, but the info is displayed in the Manager activity.

  Useful in the audit of what has occurred and are auto stocks. This can help in the troubleshooting section.

  It appears if you select 'Tools' > 'the activity Manager.
  Thus, it is not something that suddenly arises every two minutes to annoy the user.
  The journal is deleted whenever you leave Thunderbird or you can clear the log manually.
  "Tools" > "activity Manager".
  Click on the button 'clear list '.

  This is an unusual request to stop the activity of logging as a background process and the only way to check what activity account has or has not occurred.

  I have searched and checked preferences to see if it could be turned off, but nothing helped.

• The navigation bar (folder tabs) come and go all of a sudden. I would like to disable that feature, but don't know how.

  This week, with no intent on my part, the folder and the toolbar hide tabs - in this case I can no longer see the other application icons pinned to my taskbar. I would like to disable this but don't know how.

  Hello patita12, it sounds like you have accidentally enabled full screen - you can press f11 to leave again.

• Re: How to enable/disable the module BT on Satellite A300?

  I have Toshiba Satellite A300 - 1 MM.
  When I try to connect to my Wi - Fi network NOW I have to ACTIVATE the switch, on the front of my laptop and all works well, but peripheral, Bluetooth is enabled. I would like to disable the Bluetooth and works with a Wi - fi only, without switch on or off. What kind of different drivers should I install?

  Before I reinstall windows 7 again, I was with my Wi - fi enabled and Bluetooth off, without turning on the switch on the front of my laptop, I was turn on the switch for the device Bluetooth must be enabled when I needed something transfer and was after I turn the power off and the LED is off, but I still have a free Wi - Fi and internet course all solutions? ...

  Thank you very much...

  Hello

  What happens if you install the config utility and try to manage bluetooth, then

  http://img26.imageshack.us/img26/4898/blufu.jpg

• Error: "your account has been disabled. Please, see your system administrator.

  Original title: accidentally disabled administrative account in windows XP

  When I was trying to figure out how to remove the login screen, I turned off accidentally my own admin account once I have restart my PC log on screen always there and says "your account has been disabled. see your system administrator. I don't have guest account on the computer and now I can't log on. I've tried safe mode, but could not = (.. What do I do?)

  using Windows XP Media Center Edition

  y at - it a way to get to the page of the log on screen computer management to enable administration account... Please help me.

  Hi NineFoxes,

  1. have you tried to connect to the same account in safe mode?
  2. do you think that user built-in in Safemode administrator account?
  3. what happens if you press Ctrl + Alt + Delete in SafeMode on the login screen?

  The built-in Administrator account cannot be disabled. We recommend that you check if there is a visible administrator in safe mode and login to the other user account admin user account.
  See disable or enable a user account

  Please provide us with more details, so that we can better help you.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows xp is hijacked, and even in safe mode, I can not connect. My account has been disabled and I am the owner of the computer.

  It seems that someone else took the administrator account and he has rights that replace the mines on the computer.  Try to reinstall windows xp professional, it tells me nothing, but freezes...
  Try to connect to windows on my account, he tells me that my account is disabled.
  Try to connect through safe mode that come no user name.
  Trying to set up the administrator to log on without password, said that the account has been disabled.

  I am trying to reinstall the Windows XP Professional with the disc I have, but with this gel, I can't.
  I am very discouraged and would like this to be resolved.  I'm on another computer write because I can't even connect to the other.
  It won't do anything when trying to go to the last good known either.
  My copy of Microsoft security essentials would be not updated and I had restarted and can't get back in it is saying I had a Trojan horse and he removed twice, but he was still there.  If someone else gets this problem to not restart or you cannot recover.

  Reinstalling Windows can sometimes be a difficult process and most of the time that it is not even necessary to solve most of the problems.

  In case it is necessary to reinstall Windows XP Pro, it is imperative that you back up all your data first. did you?

  In addition, if a system is compromised or broken, a clean install should be made. This means that you must configure your motherboard BIOS to boot from the installation CD (instead of the usual default, which is the hard drive). The way to do this varies according to the brand and model of your PC.

  Assuming that you have the correct CD for your PC, these instructions should work for you:

  http://michaelstevenstech.com/cleanxpinstall.html

  http://michaelstevenstech.com/bios_manufacturer.htm

  If you want to help more away from us, please answer the following questions:

  1. What is the make, model and model number of your PC?

  2. assuming you have Windows XP Pro installed on it, what level SP is in?

  3. you have the XP Pro corresponding correct for her installation CD? In other words, if you have an OEM version, you must use a CD of the OEM version. Here again, a commercial version should work as long as it is not already in use elsewhere. What level of SP is the disc in?

  4. you say that you can not connect to Windows, yet you mention that MSE has given you a message. Please specify.

  Finally, once you're convinced that all your important files are backed up and if you want to try the Windows XP system restore (or other methods) before something as drastic as reinstalling Windows, we can give you advice. And then, if damage malware is really bad, it may not be worth it. But if you want to try, let know us.

• How to enable / disable certain fields based on the value of the checkbox

  This is probably a stupid question, but I was not able to find the trivial solution (I'm fairly new to the user's BlackBerry interface)

  Example scenario:

  Screen of the user interface with two components

  box: "Run daily.

  time field: ' to hh: mm ".

  If the check box is enabled, the hour field must be activated. If the check box is not selected, the time field should be disabled.

  I wasn't able to find a simple solution. The solution is to remove all components and re-create it with different style (Field.NON_FOCUSABLE |) Field.READONLY), but there are significant drawbacks:

  1. It's pretty messy keep the current value (if the user has modified the time field and click twice on the box, I would like to have the same value and the field must be dirty)
  2. She becomes more messy when you have more complicated logic (panels inside panels that should be enabled / disabled based on all parent checkboxes)

  Any ideas?

  Thanks in advance!

  The way I handled it was to the custom methods in areas that allow me to set the disabled and then state substitute TouchEvent, NavigationMovement and NavigationClick methods to search for this variable and simply return true if it is defined. This will take care of the FieldChanged States and targeted to make them unable to be activated.

• Enabling/disabling wireless adapter without administrator rights (Win 7 64 - bit)

  Is there a way to toggle wireless adapter without it as an administrator? Our political laptops where user access is limited and admin password is required to install all the software are submitted. Since the enabling/disabling wireless adapter requires Admin rights, users by default are not able to turn on/off wireless. However, our IT Department has confirmed that their policy has nothing to do with the wireless adapter and it's a setting in Win 7. Is there a solution to this? Thank you.

  There is no control of Windows 7 that will allow a user account Standard toggle the WiFi card.

  A Standard user account is limited to the secondary action of switching on & off WiFi using the F7 / Fn + F5 key or the key it is for the model [a switch is often provided in the dialog box Windows-X as well, "Windows Mobility Center" key].