App cannot open with built in Administrator account

Similar Questions

• Internet Explorer cannot be opened by using the built-in Administrator account. Sign in with a different account

  Fixed HP laptop bios update has disabled the option to open all the apps. Simple BUT frustrating built-in Administrator fascist authoritarian East

  Hi Dean,

  Built-in Administrator account does not have a split token and metro apps may not work under full administrator token. So metro apps cannot be turned on with the built-in Administrator account.

  I recommend you create a new user account to access the User Interface modern apps.

  Check out the following link to create a normal administrator user account.
  Which user account is right for me?
  http://Windows.Microsoft.com/en-us/Windows-8/which-user-account-for-me

  Create a user account:
  http://Windows.Microsoft.com/en-us/Windows-8/create-user-account

  Hope the information is useful. If you have any other questions, answer here and we will be happy to help you.

• Card reader net use works with only built-in Administrator account

  I currently have a windows 7 PC that I use net use in the cmd file to map the drive to Windows server 2008.

  It works if I use the built-in Administrator account / password but I tried another account that is in the administrator group on the server and I get errors.

  NET USE X: \\IPADD\c$\inetpub\ftproot password / User: adminuseraccount

  NET USE X: \\IPADD\c$\inetpub\ftproot password / User: server\adminuseraccount

  After you change the net use command in various ways, the 2 following errors are what I mean most of the time:

  1219 system error has occurred.

  Multiple connections to a server or a shared resource by the same user, using several
  that the a user name, are not allowed. Disconnect all previous connections to the
  Server or shared resource and try again.

  OR

  System 5 error has occurred.
   
  Access is denied.

  I have watched a lot of research on this but cannot get this to work.

  Also, one thing that I think make changes the built-in name admin and the password.  What is a safe thing to do?

  Thank you

  Dave

  Hi Cheetah,

   

  Welcome to the Microsoft community.

  I suggest you to ask your question in the TechNet Forums, where we are the support technicians who are well equipped with the knowledge on mapping drives to Windows server 2008.

  You can check this link to post this request.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=w7itproSP%2Cw7itproui%2Cw7itpronetworking&filter=AllTypes&sort=lastpostdesc

  Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• Lockout policy impact on the built-in Administrator account password

  Using the elevated command prompt, I programmed an account lockout threshold wide system.  This policy affects all accounts except the built-in Administrator account.

  What settings should I set to force the built-in Administrator account to comply with the policy of /lockoutthreshold net accounts?

  Affected systems:

  • Windows 7 Home Premium
  • Windows 8 Professional

  Using the elevated command prompt, I programmed an account lockout threshold wide system.  This policy affects all accounts except the built-in Administrator account.

  What settings should I set to force the built-in Administrator account to comply with the policy of /lockoutthreshold net accounts?

  Affected systems:

  • Windows 7 Home Premium
  • Windows 8 Professional

  I don't think that you can activate for local administrator or domain administrator. Because in the case of a system crash, these two things are those who can unlock the pc/account.

• Rename a built-in Administrator account

  I have a slightly damaged built-in Administrator account: the name was changed. Is it possible to rename 'Administrator' once again, so that it would correspond to the rest of the machines in this office?

  Windows 7 Home, sp1; Laptop HP - G72

  It can apparently not (easily) be given back its original name

  As I mentioned before, have a renamed administrator account doesn't hurt.

  The key to your question is in the word "easily" in your answer. To restore the original name of the administrator, you can use this advanced control:
  NET user administrator /Fullname:Administrator

• After that update cannot open creative cloud desktop administrator, how to go back to simply click to open?

  After that update cannot open creative cloud desktop administrator, how to go back to simply click to open?

  Run as Administrator http://forums.adobe.com/thread/969395 measures to permanently assign FULL permissions

• How do I open a session with the local administrator account in Windows 8

  Hello

  About two weeks ago, I bought my laptop Dell Inspiron 15 inch 7000 Series that pre-installed with Win8 Japanese worm.

  Tried to download the Win8.1 from the store to Win, but asked me to identify a user with administrative privileges.

  When I booted up my laptop, it only prompted me to my Windows account (created this account I've first turning on my laptop).

  How can I change to log to the local administrator account when starting my laptop?

  Thank you

  Concerning

  Tom

  Thanks Shawn.

  Got my Windows 8.1 updated on my Dell laptop. Thanks for your help.

  Concerning

  Tom

• Changing the built in Administrator account?

  In Windows 7, I used the built in Admin account. Now, I've upgraded to Windows 8 my account cannot use Windows 8 Apps. Is there one solution other than to start a new account? I don't want to spend all my photos, videos, etc. and reinstall all my programs under a new account if possible and I don't want that two accounts.

  I just finished by making a new account and move with the resettlement of things. A big problem that I had was that I ended up not having permission to use my own photos! I had to go to the security settings to correct this.

• built-in Administrator account

  How to copy the built-in to another administrator account account user with administrator privileges?

  I used integrated until I understand the security risks.

  I want to transfer all Outlook data, including notes, flags and deadlines to another user account.

  I would do the same thing you want to do the same procedure to recover a damaged profile.

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  HTH,
  JW

• Cannot change the type of administrator account during an administrator account

  Hello I seem to be stuck with the normal start safe mode and tried several things without success.
  So far I used Safeboot/restart and restart with normal startup and "clean boot" method of
  following the suggestions on the Microsoft Web site. Also reset all services by default. Whenever I try to start a service, it gives me the error 1084: Windows could not start the Windows Service on Local computer error 1084: this service cannot be started mode without failure or error 1068 "the dependency Service or group could start. Only some of the services have actually begun. Also, I can't in some documents and files, such as Documents and Settings and Config.Msi. With the error "there is no location (path) is not accessible"access denied" Almost all set so that it starts in the service is stopped and does not let me start with the same 2 errors. I tried to use the Windows Defender update option after the beginning of his service and I come with error found: Code 0x8007043c. I went to check if I had administrative rights by setting account type for my account current (user) who says it's an administrator account already, but he said that it is standard. When I try to switch to administrator it just combines the button "change account Type". At this point I don't know what to do besides restore my registry. I can provide a few previous actions if you need. I don't think I'm going to tinker with things more far away, however, in fear of complicating it. Any help would be appreciated.

  Don't give me the option to the Windows recovery environment in the startup options (F8), although it could be F2 or F12, I noticed for another set of options to start the computer (Windows Vista Ultimate). Furthermore, after being not able to use the WIndows recovery environment, I just went ahead and used Directory Services Restore Mode. After doing this I used the system restore and restored to the last point that he had saved and it solved the problem - once he had fixed services. I want to note also that, File Checker (SFC.exe) system, fixed a problem I was experiencing a lot more before with my computer takes about 3 minutes to start. Now it is lightning fast. Thanks for the help, and I hope this helps others who have the same problem (s).

• How solve 'cannot log in to my administrator account on Windows vista?

  I try to change my password in safe mode. but seems still does not...

  You can change your password to something that you remember another administrative user account. If you had only an administrative user account and you have forgotten the password, all is not lost. You can then follow the general recommendations for implementing user accounts in Vista that I will give you at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]
  NET user [insert here the name of your user account] [insert the new password of user as 1234 here] [press Enter]

  [Note: do not enter the brackets!]

  Remove the installation DVD and restart the computer. Now, you will be able to connect to your user account by using the password that you set; for example, 1234.

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  Once you have fixed things, log on to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

• Windows 7, the deactivation of my built-in Administrator account

  I activated the account administrator built into my laptop with Win7, and this is the account I use normally. I created another user with administrator privileges and a few days after windows has started to disabled the built-in account.

  The second administrator account is not so much, but I had created. Currently every 30 minutes that I see that the administrator account is disabled and windows do appear for this second user credentials when I need to run an application or a command as an administrator. It is very annoying, how do I solve this problem?

  User accounts get disabled when too many failed attempts to logon is performed, such as defined in the security policy. A connection attempt may be one of them:

  -An attempt to connect interactively
  -An attempt to run a scheduled task
  -An attempt to connect to a resource shared as a shared folder or printer.
  You can check your current account with the secpol.msc command policy settings. You can cause logon attempts will be followed in the same place under local policies / Audit policy. Then the will generate a log viewer (eventvwr.exe) events.

• SEQ file created via V2013 cannot open with V2014?

  Hello, I created a file .seq with V2013 edit sequence without protection, but this file cannot be opened with the editor spequence of V2014 in another computer and display a dialog below: :-17100 error code

  Is it on two different computers or on the same computer? If it is two different machines, it is possible that your region on your operating system settings are defined differently from the default language to use for non-unicode programs? If so, try setting the TestStand 2014 machine to match the settings of the machine of TestStand 2013. Also, make sure that the Option on the location tab has the same settings to "Recognize multibyte characters" on both machines.

  Hope this helps,

  -Doug

• Need to remove the built-in Administrator account.

  Original title: profile

  I have a Director profile that is on my computer that I did not koow was on the computer because it is used. I don't have anyone to go into the person that I bought the computer because I bought it on amazon. I know that the only way to remove adminstrative profiles is for someone else to connect to my computer to delete. Can you help me? In fact, the only reason why I found it was there I started the computer in safe mode, and then it appeared. The strange thing is that the version of Xp that I bought is only the version I use. So I don't understand how that's possible. If I had a close friend I would ask for help, but right now I do not know anyone who can help remote

  The 'administrator' and 'guest' account is integrated and cannot be deleted.  All Windows installations have a.  As you have discovered, it is not visible unless you start mode without failure.  The default password is blank for the administrator account (click top and hit at the password prompt).  If you are worried about someone access your computer using this account, then simply change the password.   This account allows you to take control of the recovery of your computer should you not be able to use your user name.

  HTH,
  JW

• Cannot open with photoshop CS2 image

  I got this camera, Canon 50 d, for little more than two years.

  Now it's time to start working with Raw image and cannot open the image with Photoshop.

  But I could open me with EOS utility for working with Photoshop.

  Thanks for reading and tips pleae

  Photoshop CS2 will never be directly open a Canon EOS - 50 d raw file.  The raw files of each device are different and your camera has been designed after the Photoshop CS2, Camera Raw application has stopped to receive updates.

  This list is relevant:

  http://helpx.Adobe.com/Creative-Suite/KB/camera-raw-plug-supported-cameras.html

  That said, there is a free solution that will allow you to open your pictures indirectly.

  • Download and install the latest version of the free Adobe DNG Converter:
    http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5388 (Mac)
    http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5389 (PC)
  • Whenever you have a folder full of 50 d raw images run the DNG Converter on the folder to convert all files to DNG.  You will need to select the appropriate compatibility setting.
  • You can now open the DNG files with Camera Raw in Photoshop CS2 converter.

  Either way, the latest version of Photoshop Camera Raw Converter offers better quality images, then you want may be mobile until Photoshop CS6.  Unfortunately, you will have to pay full price; it's not Photoshop CS2-> discount CS6 upgrade.

  -Christmas