Appeal procedure on page and PLS-00049 stored error?
Hello guys!I am facing many problems this morning! First of all, that I need to deal with is this.
I created the process page (see below: 1 code) in order to validate if all records where LNG_GEBIET is to have the status of 3 or 4. If this is the case I want to call the procedure 'set_status_arbeit_zu_gebiet '. If amountrs and countstat do not match, then nothing is meant to do.
The problem lies in the stored procedure itself. I have an error PLS-00049 bind variable for: new. LNG_GEBIET.
Can you please tell me what I forgot to declare in the code 2 below?
Thank you guys!
The process of the page:
Declare
amountrs number;
countstat number;
begin
SELECT COUNT(*) INTO amountrs FROM TBL_PUNKTDATEN where LNG_GEBIET = :P4_CNT_GEBIET;
SELECT COUNT(*) INTO countstat FROM TBL_PUNKTDATEN where LNG_GEBIET = :P4_CNT_GEBIET and INT_STATUS = 3 or LNG_GEBIET = :P4_CNT_GEBIET and INT_STATUS = 4;
IF amountrs = countstat THEN
set_status_arbeit_zu_gebiet;
ELSE
dbms_output.put('nothing');
END IF ;
end;
Code 2 with the real problem!CREATE OR REPLACE PROCEDURE set_status_arbeit_zu_gebiet
IS
cursor c2 is select LNG_GEBIET from TBL_ARBEIT_ZU_GEBIET where PNUM = 1114 and LNG_GEBIET=:new.LNG_GEBIET;
v_c2 c2%ROWTYPE;
BEGIN
open c2;
fetch c2 into v_c2;
if c2%notfound then
INSERT INTO TBL_ARBEIT_ZU_GEBIET
(
LNG_GEBIET,
LNG_ARBEITSSCHRITT,
PNUM,
INT_BEARBEITER,
DATE_DATUM,
GEPL_DATUM
)
VALUES
(:new.LNG_GEBIET,
52,
1114,
895,
sysdate,
to_date('01.01.1990', 'DD.MM.YYYY')
);
commit;
close c2;
END set_status_arbeit_zu_gebiet;
Another question: is it possible to integrate the first validation that calls my stored procedure in code 2?Thanks for your time!
Sebastian
The error is in training subsequently:
INSERT INTO TBL_ARBEIT_ZU_GEBIET (...) VALUES (: new.) LNG_GEBIET,...) ;
As the statement is part of a procedure and no trigger is not able to bind to this variable with any value.
As a resolution, pass this value to the procedure of the process and use it in the insert statement.
The process will have after the IF statement:_
IF amountrs = countstat THEN
set_status_arbeit_zu_gebiet *(:P4_CNT_GEBIET) *;
ON THE OTHER
dbms_output.put ('nothing');
END IF;
and the procedure will be as follows:_
CREATE OR REPLACE PROCEDURE set_status_arbeit_zu_gebiet *(p_lng_gebit varchar2) *.
IS
cursor c2 is select LNG_GEBIET from TBL_ARBEIT_ZU_GEBIET where PNUM = 1114 and LNG_GEBIET = -: new. LNG_GEBIET - p_lng_gebit ;
v_c2 c2% ROWTYPE;
BEGIN
...
INSERT INTO TBL_ARBEIT_ZU_GEBIET (...)
VALUES
( -: new.) LNG_GEBIET - p_lng_gebit,...) ;
...
END set_status_arbeit_zu_gebiet;
Tags: Database
Similar Questions
-
Submit to a stored procedure of Page APEX
I created a page 6 APEX to allow the user to execute a stored procedure. Page 6 has a process of page named "Execute the stored procedure." In the section Source is the following logic:
DECLARE
v_error_tracking VARCHAR2 (4000);
BEGIN
v_error_tracking: = 'text ';
#OWNER #. ERR_CREATELOG_PROC (UPPER(:P6_EMG_NAME)
,: P6_EMG_EFF_FROM_DATE
,: P6_EMG_EFF_TO_DATE
(: APP_USER);
() apex_mail. Send
p_to = >: APP_USER | "@nycha.nyc.gov", change to your email address
P_FROM = > '[email protected]', - change of an actual e-mail address shippers
p_body = > ' name of emergency: ' | TRIM(:P6_EMG_NAME) | "End of the update log procedure."
p_subj = > ' name of emergency: ' | TRIM(:P6_EMG_NAME) | ERR ' Update Process Status);
APEX_MAIL. PUSH_QUEUE;
END;
This process is: on submit after computauions and validations
The point of the process of the branch to Page 1 is: present immediately after treatment (after computaion, validation and treatment)
When I click the button submit the process runs. There is an exhibition brief thermometer green in the status bar of the browser that finally expires before the process ends. The apex_mail.send process runs not until the last commit an ERR_CREATELOG_PROC is issued and the process is exists. (I thought that maybe the stored procedure hung because I had an OUT parameter in the stored procedure, but I disabled it that and still get the same results.) I want to submit ERR_CREATELOG_PROC, then the page creates a branch to the calling page 1 while the process is running on the database server. (I have also remove the call to apex_mail and possibly appeal to UTL_SMTP within ERR_CREATELOG_PROC.)
I tried to process the branch point to Page 1 is: present immediately after treatment (after computaion, validation and BEFORE treatment) with the same results.
How can I submit a stored procedure to execute on the database of this page, the system immediately return to the page and then continue processing normally?
Published by: Comet on February 15, 2012 12:44Comet says:
I want to submit ERR_CREATELOG_PROC, then the page creates a branch to the calling page 1 while the process is running on the database server.
...
How can I submit a stored procedure to execute on the database of this page, the system immediately return to the page and then continue processing normally?apex_plsql_job API allows to PL/SQL, which will be presented program units to run asynchronously in the background.
-
Appeal procedure in another procedure using the Out parameter slider - lesson
Hello
I am new to Oracle development so first I wonder if it is a good place with a simple way of the of on how to create stored procedures? I'm looking for the most part at this stage for a quick read.
Second, currently have hacked and slashed my way into getting one built. It has 3 parameters and an output parameter sys_refcursor. This procedure works.
I want to have another created procedure that will call the above procedure and loop through each row in the setting out and write to a file. Can someone point me to an example of this by any chance?
Thanks for the help.
Hello
e28d78d3-c6c6-4BCE-b14f-0f6bf26fa17c wrote:
Thanks for the reply.
Here's what I have, but I'm getting many errors. When I seem to fix one that I get a new one. Kind of like what it show me all questions vs one question at a time. I never know if I create another error of my attempts at fixing what, in my view, could be the problem. In any case, something to get used to.
When you do any type of programming, take baby steps. Write less code as possible, test what you wrote ' worm and, if it contains errors, correct them and test again.
The PL/SQL compiler tries to show all errors, but often it is impossible to say what is a separate mistake, and which is a consequence of a previous error. For example, the DECLARE statements in your code are perfectly valid PL/SQL statements, but they are the mistakes in the sense that they are not what you think, and you may not use them. PL/SQL does not know that (I don't really know that, either, but I'm willing to guess in this case). The works of compiler on the explanation that you really wanted to say SAID, until what it becomes obvious, maybe several lines later, that something makes no sense, but at this time, there is no way he could say that the undesirable DECLARE was the cause.
So here is where I am stuck currently. What I want should first, run the stored procedure and I think I do as you suggest. Which returns data in the output parameter, which is of type sys_refcursor. I think I would need to loop through each element that cursor and output to the file using the dbms_output you reference and like I did below. This should be it. Sounds simple enough, but it's where some of the basics for me.
For example, by creating the procedure some examples have the name of the procedure and then some "AS", "IS". When use the beginning and the end and when not I need?
There is no difference betwwen
CREATE PROCEDURE... AS and
CREATE PROCEDURE... Use IS the one you prefer. You must always one or the other, however.
PL/SQL is written in blocks. The basic structure of a block is
DECLARE - optional, sometimes involved
...
BEGIN
...
-Optional EXCEPTION; forget it for now
...
END;
Almost all of the PL/SQL code is part of a block. In fact, you could argue that anything not in a block isn't really PL/SQL. (For example, CREATE PROCEDURE is really an SQL, PL/SQL not, it indicates the SQL that some PL/SQL compiler is coming.)
You should always BEGIN and END keywords in a PL/SQL block; None is never optional.
I think I'm doing the for loop correctly but I get an error on the portion of loop-end. It is a part of these simple things that become I think that.
That's what I have:
CREATE OR REPLACE PROCEDURE APPS.boact_report_3
AS
DECLARE v_cur SYS_REFCURSOR;
DECLARE v_file_out UTL_FILE.file_type;
BEGIN
I said earlier, DECLARED may be implied. It's one of those places if there is nothing after CREATE PROCEDURE... IS and before STARTING, it is supposed to be a statement.
You can have as many statements (0, 1, 2 or more) that you want in this section of the statement. The semicolon at the end of each of them is all the separation you need each other; you don't need any keyword as STATED.
Open the v_cur for
bo_report (p_sv_id, p_start_date, p_end_date, out v_cur); -stored procedure that girls v_cur witch is a sys_refcursor parameter. It works
END;
BEGIN
Don't forget, how to call a procedure is
bo_report (x, y, z);
not
bo_report (x, y, z OUT);
The key words are only necessary (and only used) in the declaration of a procedure, not in his appeal. When you create a procedure, you decide if each argument is going to be an argument IN, an OUT argument, or IN OUT argument, and you tell the compiler that you decide. When you call a procedure, you have no choice; each argument is IN, OUT or IN OUT has already been decided, and suffice to say compiling what are the variables (or expressions) that you use to play these predetermined roles.
Dbms_output.put_line ('Date: ');
v_file_out: =.
UTL_FILE.fopen (' / public/scripts/smorau02 ', 'w_act.csv', 'W');
FOR x IN v_cur
LOOP
() UTL_FILE.put_line
v_file_out,
x.cl_num | ','
|| x.wa_id | ','
|| x.Description | ','
|| x.a_date | ','
|| x.a_by | ','
|| x.v_Name | ','
|| x.SITE_NAME | ','
|| x.stage | ','
|| x.in_queue);
END LOOP;
UTL_FILE.fclose (v_file_out);
END;
Thanks again for the help.
You have not to send the code to bo_report, so I can't run the procedure. I do not notice any obvious mistakes immediately superior.
-
I have a very simple procedure call. The procedure takes 3 inputs: 2 numbers, and a Boolean value. Every time I try to run the page that calls the proc, I get
"ORA-06550: line 1, column 7: PLS-00306: wrong number or types of arguments in the call to 'MISSED_DAY_CLASS' ORA-06550: line 1, column 7: PL/SQL: statement ignored."
I ran the Debug page and values, it's the award appear to be 2 numbers and 1 boolean (TRUE). I executed the same values in the call to the proc outdoors using sql dev and proc call works fine.
The Boolean value is set via a checkbox with this LOV element:
STATIC2:; TRUE
Any ideas are appreciated.
Thank you
ReidHello
I think that the value of the checkbox is not Boolean. It is text (VARCHAR).
If you change the procedure as well as boolean is varchar2, it works then?
Or in the process of Apex call differently for exampleIF :Px_YOUR_CHECKBOX = 'FALSE' THEN yourprocedure(:Px_NUMBER_ITEM1,:Px_NUMBER_ITEM2, FALSE); ELSIF :Px_YOUR_CHECKBOX = 'TRUE' THEN yourprocedure(:Px_NUMBER_ITEM1,:Px_NUMBER_ITEM2, TRUE); END IF;
I hope you get photo off what I mean
BR, Jari
-
Use iCloud settings shuts off when I opened the Pages and Numbers
I have docs Pages and Numbers in iCloud (no road to iCloud) I want to access. There, they were stored on my old iPad 2 current running iOS 7.1.2 2.2.2 Pages and Numbers 2.2.2. I do not use iCloud Drive, just the 5 GB of storage free iCloud.
On my new iPad 2 Air 2.6.2 performer 9.3.2,and 2.6.2 and number Pages when I opened two app, their desktop computers do not show the docs to iCloud. When I go to the settings in the applications of bot and activate using iCloud, as soon as I open an app, when I look in settings, with the iCloud button automatically turn off the coast. The only pop-up menus to choose from for iCloud on the new iPad 2 Air must use iCloud Drive, which I don't use.
Is there a certain limitation in these apps that only allows to use iCloud drive and not the 5 GB free iCloud I use?
Tips on how to connect to these docs Pages and Numbers in iCloud on my iPad 2? I know that I could email them to me, but that would be a lot of work.
You do not use more of your space free storage on iCloud by using iCloud drive. iCloud Drive is simply the latest, most updated to access your documents in iCloud iOS 9.
I suggest to turn it on and use it.
-
I have Pages 09 and OSX 10.8.5
- I can't use versioning to Pages. My understanding is that I should see an arrow will appear when I mouse over the title of the document. No such thing appears.
- He works in TextEdit, so I know the OS part works.
- Next to my title of the page it says in parentheses like this: (Word precession). Don't know why or if it's important somehow.
Help, please. I could really use a backup for the Pages that I lost a whole day of work last week. I'm new to the Pages and didn't know that he didn't record any auto.
In the application menu Pages: pages, what explicit version of Pages do you use?
I use Pages ' 09 v4.3 on (10.8.5) Mountain Lion now. I opened a document that I had not touched it since 2012, and passing the pointer of the mouse any where on a horizontal line with the title of the document will cause the triangle pointed downward to appear. By clicking this triangle shows... Browse all Versions in the context menu.
Given that this file was created and stored in a change, there was no version history is. With a Finder window to the icon document, I added text and watched the document icon to change briefly as the document updated. AutoSave is enabled after the first recorded document activity. Once I did that change first, version history now showed the original document without my edit.
-
My printer does not print in black. I followed all the instructions to fix it. I can't go down loard that assistance because it is a Vista. I get to the secure page and he asked my name and my password. I am the administrator, but it does not accept my names or passwords and blocking me. What name and password it seeks?
Hi @arts4pat,
Welcome to the Forums of HP Support!
I see that you get a secure page and that you are unable to print black on your HP Photosmart 5520 e-all-in-one printer. I'd be happy to help you with this.
I like that you get the login screen for the Built-in Web server for the printer. Is this correct? This seems to indicate that someone has put a username and password on the printer, for security reasons. If you don't know what are the connection information, the only way to remove this is to do a factory reset on the device. I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.
That being said, I would like to start here. Please, try the steps in this guide, the printer prints blank Page or fact not printing black or color ink for HP Photosmart 5520 and Deskjet Ink Advantage 5520 series e-all-in-one printer.
NOTE: This problem may be caused by problems with the ink cartridge print head or with the printer ink system.
If you have completed all the above steps and your product still has a problem, the printer service.
Contact HP for service in all countries except Asia-Pacific.
First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
Cost of repair out-of-warranty printers may apply.What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
Step 1. Open the link: www.hp.com/contacthp/
Step 2. Enter the product number or select Auto detection
Step 3. Scroll up to "still need help? Fill out the form to choose your
contact options»
Step 4. Scroll down and click on: contact HP options - click Get phone
number
File number and phone number are displayed.I hope this helps. Good luck!
-
Dear all,
I am a beginner in the ADF and am under Jdeveloper Studio Edition Version 12.2.1.0.0.
I have a page that consists of two taskflows.
First workflow has a fragment which is to have a table based on view object salespersons (not editable)
Second task flow contains a form of ADF from the same view object Salespersons.
As the user selecting a line in the table of the same record is displayed as no problem.
Now, I have added two buttons Activate and Deactivate that is to change the status of the sales.
I tried to use two ways an updated using the procedure of database and then put in value by programming and I have different questions with two of them:
Now, here's the code of the Java bean for activation:
Option A - the problem with this is the value of the column in the list (the first task rate displayed) is not synchronized
and Activate and Deactivate buttons are not disabled and active properly.
{} public void confirmActivation (DialogEvent dialogEvent)
If (dialogEvent.getOutcome () == DialogEvent.Outcome.yes) {}
DBSequence vId;
vId = dcId.getValue ((DBSequence));
Links BindingContainer = getBindings();
OperationBinding operationBinding;
operationBinding = bindings.getOperationBinding ("changeSalespersonsStatus") (OperationBinding);
operationBinding.getParamsMap () .put ("pId", vId.getValue ());
operationBinding.getParamsMap () .put ("pStatus", "A");
Object result = operationBinding.execute ();
dcStatus.setValue ("A");
} else {}
return;
}
}
Option B - the problem with this is that the value of input for status text appears in the Active form for all records in form regardless of its database.
{} public void confirmActivation (DialogEvent dialogEvent)
If (dialogEvent.getOutcome () == DialogEvent.Outcome.yes) {}
-no doubt this two lines are not needed here
DBSequence vId;
vId = dcId.getValue ((DBSequence));
dcStatus.setValue ("A");
BindingContainer links = getBindings();
OperationBinding operationBinding;
the operationBinding = bindings.getOperationBinding("Commit") (OperationBinding);
Object result = operationBinding.execute ();
} else {}
return;
}
}
Here's the code from the Fragment of shape for used buttons.
"< af:button text = 'Activate' id ="bActivate' icon="/icons/activate.png ' iconPosition = 'top '.
partialTriggers = "Bcreer bSaveInsert bCancelInsert dDeactivate dActivate".
Binding = "#{pageFlowScope.salespersonsForm.buttonActivate} '"
Disabled = ' #{bindings. " Status.inputValue! {= ' n '} ">"
< af:showPopupBehavior popupId = "pActivate" / >
< / af:button >
"< af:button text = 'Disable' id = 'bDeactivate' icon="/icons/deactivate.png ' iconPosition = 'top '.
partialTriggers = "Bcreer bSaveInsert bCancelInsert dDeactivate dActivate".
Binding = "#{pageFlowScope.salespersonsForm.buttonDeactivate} '"
Disabled = ' #{bindings. " Status.inputValue! {= 'A'} ">"
< af:showPopupBehavior popupId = "pDeactivate" / >
< / af:button >
Here's matching Popups for each of the buttons Activate and Deactivate.
< childCreation = "deferred" autoCancel af:popup = "disabled" id = "pActivate" >
< af:dialog id = "dActivate" type = "YesNo" title = 'Status of salespersons' closeIconVisible = 'false '.
affirmativeTextAndAccessKey = "& amp; Yes"cancelTextAndAccessKey ="& amp; (Cancel)
noTextAndAccessKey = "& amp; No '.
dialogListener = "#{pageFlowScope.salespersonsForm.confirmActivation}" >
< f: facet = 'buttonBar' name / >
< af:outputLabel value = "Are you sure you want to enable the seller?" id = "ol1" / >
< / af:dialog >
< / af:popup >
< childCreation = "deferred" autoCancel af:popup = "disabled" id = "pDeactivate" >
< af:dialog id = "dDeactivate" type = "YesNo" title = 'Status of salespersons' closeIconVisible = 'false '.
affirmativeTextAndAccessKey = "& amp; Yes"cancelTextAndAccessKey ="& amp; (Cancel)
noTextAndAccessKey = "& amp; No '.
dialogListener = "#{pageFlowScope.salespersonsForm.confirmDeactivation}" >
< f: facet = 'buttonBar' name / >
< af:outputLabel value = "Are you sure you want to disable the seller?" id = "ol2" / >
< / af:dialog >
< / af:popup >
Thanks in advance.
Best regards
Arif Khadas
If you bind components to a range of flow page bean. You must complete that it saves the State of the component longer than the life of the component.
To change the value of the GET value of the component of the link layer and change it.
In this way the changes are captured by the framework and you should see them.
Timo
-
Migration of OAF - Pages and regions - xml files
Hi all
Can someone explain to me the answer to the following questions
(1) why tradition expanded Page and the files of the region should not exist under $JAVA_TOP?
(2) why page Standard and region files exist under respective $XXXX_TOPs/SDM... of the directory
As the definition of page files are not used when running and are only for reference and the backup object, we can follow any structure of directory for storing these files.
However, other files such as AMImpl, the controller class and VO.xml must be there to $JAVA_TOP...
-
INSTEAD, error PLS-00049: bad connection variable
I try to use a PLACE for me to enter data in a table of bridge. Thanks in advance
I get the following error:
Error on line 4: PLS 00049: bad connection variable ' NEW. MEMBER_ID'
2 INSTEAD OF THE INSERT OR UPDATE OR DELETE
3 ON VI_Member_Talent_VW making REFERENCE AGAIN AS NINE OLD and OLD
4. FOR EACH LINE
5. START TO
6. IF THE INSERTION
Here is the code:
CREATE OR REPLACE TRIGGER VI_INSERT_UPDATE_MT
INSTEAD OF INSERT OR UPDATE OR DELETE
ON VI_Member_Talent_VW REFERENCING NEW AS NEW as OLD OLD
FOR EACH LINE
BEGIN
IF THE INSERTION
THEN
INSERT INTO VI_Member_Talent (Member_ID, Talent_ID) VALUES (: NEW.) Member_ID,: NEW. Talent_ID);
END IF;
IF THE UPDATE
THEN
UPDATE VI_Member_Talent SET Member_ID =: NEW. Member_ID, Talent_ID =: NEW. Talent_ID
WHERE ROWID =: OLD.ID;
END IF;
IF THE REMOVAL
THEN
DELETE FROM VI_Member_Talent WHERE ROWID =: OLD.ID;
END IF;
END;
Edited by: user13003575 may 2, 2010 08:53user13003575 wrote:
It's the viewCREATE OR REPLACE FORCE VIEW "VI_MEMBER_TALENT_VW" ("ID", "Member_ID", "Talent_ID") AS SELECT rowid id, Member_ID, Talent_ID FROM VI_Member_Talent /
and there is the problem.
The view was created with quotes around column names, so that they are case-sensitive. You need to either modify your trigger double quote column names, or rebuild the view without the quotes. Personally, I'd go with changing the display.
John
-
Width of page and the custom region
Helly experts!
Just a small question that haunts me! How can I set the width of page and the region for pages in each case regions individually in the Apex? I use Firefox and nothing seems to work. I already tried to declare the width of the region in the 'attributes of the region' and assign style = ' width: 300px ".
This has no effect whatsoever. Is there a way to enforce the widths of page and the region?
Thanks for your help!
SebastianPut something like this in the header of the region:
and close the div tag in the footer of the region
That will make your region 400px wide.
Denes Kubicek
------------------------------------------------------------------------------
http://deneskubicek.blogspot.com/
http://www.Opal-consulting.de/training
http://Apex.Oracle.com/pls/OTN/f?p=31517:1
------------------------------------------------------------------------------ -
Application/security page and the event sequencing
I created a very simple application exactly according to the instructions of the application oracle express pro (Chapter 3). I have all the components working using basic table. I have three pages, a login page, no page (the application "hello world") and I created a separate user registration page. I added a button to the login page that says "register new user". So I'm thinking of you come to the login page normal, if not registered click on 'save the new user' button and go to the registration page (user, pw, email, recover the chain of validation e-mail, execution of pl/sql procedure, etc.). I checked using the page directly (execution), and using the verification link directly, everything is good.
I can't click on the button "register new user" and go to the page of connection to the registration page. Button submits the page, and I have a branch for "suite submit before the calculation, validation and treatment" attached to this button (? maybe set up evil). But all processes log fire even when normal and it stays on the login page 'try' to connect. I thought that my new button should / could ignore these things and get my registration page. I do the public or open registration page? How? How will having a secure application, but have a single page (registration new user) that can be accessed by the public to register to use the application?Hello
Your new button should not trigger a shipment. On the definition of the button, go to the optional URL forwarding and enter the page number for your registration page. Remove any branch of the page that was linked to this button.
Andy
-
Redirect to a page and submit this page?
I have a page which, once submitted, calls a few procedures database and displays the details of items in stock. Next to each item is a link to Transact the point that goes to another page. Once the issue has been addressed on this page, I would like to branch back to the original page and show put updated figures.
However, the question is, we call the code after "Send" to start by filling temporary tables. So when the branches back page, tables are not met and this is why we do not see the data it takes.
Is it possible in a branch to say "creates a branch to this page and submit it?
Thank youHello
You can still use the javascript method to call the function doSubmit, but you also need to update the value of P1_SUBMIT.
Assuming that P1_SUBMIT is an item hidden on page 1 and has a value of 1 to validate or 0 for no present, then:
<script type="text/javascript"> $x('P1_SUBMIT').value = 0; doSubmit('P1_SUBMIT_BUTTON'); </script>
This should be an area in itself and should be subject to P1_SUBMIT being equal to 1
Your button on page 2 must then on P1_SUBMIT 1 so that, when the button is clicked, the P1_SUBMIT value is set to 1, the javascript region is therefore included in the page, so the javascript code is executed, P1_SUBMIT is set back to 0 and the page is sent. When the page reloads after that, as P1_SUBMIT is 0, the region of javascript is not included, so that the page is not automatically subject again.
Andy
-
I do my job to the computer on a MAC book PRO. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open the document. My problem is the document does not show the icon, but rather the document is already open. I spoke with 2 Apple. 'Experts' care and can help me. Can someone tell me what to do?
It's a question of how the recipients e-mail programs deal with attachments. Many e-mail programs will open all the files they can handle, including files jpg and PDF, by default, and if the recipient has not changed that there is nothing you can do about it. The only solution is to the compress first, then it will be delivered as an attachment, allowing the recipient to decompress and open it.
-
Since the update to Firefox 41.0.2 I couldn't use Twitter.com. When I try to tweet, favorite, or retweet the following error occurs. Your account may be able to perform this action. Please, refresh the page and try again. There are a couple of other users who have the same problem, but it was tinkered with Mozilla and the other pending.
It started with the update to 41.0.2 and twitter works in all other browsers, but not Mozilla.
Here's this other thread with the DIY: Impossible of Retweet, tweet or articles favorite on Twitter, even when I refresh the page.
I think there must be a setting or a question Add on. Your extensions look pretty standard, so I'm leaning towards a parameter of the problem. You could test as follows:
By default, Windows hides the .js extension. To make sure that the following steps work, you have to disable this feature, at least temporarily. This article has the steps: http://windows.microsoft.com/en-us/windows/show-hide-file-name-extensions
Open the settings folder (AKA Firefox profile) current Firefox help
- button "3-bar" menu > "?" button > troubleshooting information
- (menu bar) Help > troubleshooting information
- type or paste everything: in the address bar and press Enter
In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.
Leave this window open, switch back to Firefox and output, either:
- "3-bar" menu button > button "power".
- (menu bar) File > Exit
Pause while Firefox finishing its cleanup, then rename prefs.js to something like prefs.old.
Launch Firefox back up again and it must use the default settings (for example, integrated home page). If you need to restore your previous session windows and tabs, go ahead and select restore previous Session from the history menu.
Twitter works best? If so, we could try to understand the precise adjustment at fault or you could rebuild your settings. Or you can undo the change by renaming the new prefs.js to prefs.txt and rename prefs.old back to prefs.js (with Firefox closed, as you did before) and understand it through a little trial and error.
Maybe you are looking for
-
Is there a reset button or a way to remove the battery to do a hard reset? I do not wait for the battery to die will do, but in another 6 hours or more mayby I'll know better. He is not responding to something... ctrl alt del, ctrl shift esc, alt f4.
-
unlock the security &; privacy
How can I unlock the security and privacy settings in El Capitan. I thought I had the correct password, but apparently not. Thank you very much for your answers.
-
I would like for a total of all the data that is on the same date. It makes me cringe teeth I did not find another solution. May God have mercy on my soul.
-
Pavilion 500-307nd: create additional partitions without endangering the recovery option
I just bought a new HP pavilion 500-307nd, it has a 2 TB hard drive. Currently, it contains the recovery partition (10 GB), the rest is used as one and only one primary partition. I would like to divide this (close to 2 TB) a partition into three par
-
Need Intel display driver ialmrnt5. Could not locate.
My pilot ialmrnt5 display works like my golf swing on the tee. Not at all. I can't find an update or replacement. Here are my stats: IntelR computer, model manufacturer = AWRDACP1, type = X 86 and purchased at Fry pc in 2004 about. Intel Graphics Co