Apple Watch no sound when decisions/receiving calls

Similar Questions

• Why don't my Apple Watch telling me when I received a text when the Bluetooth?

  When my phone is on wifi and I wear my watch, my watch will make noise and show that I received a text as soon as I get one.

  However, when I got my phone and watch connected via bluetooth and I get a text message, nothing happens on my watch. Hear no notification nothing. But if I open the messages app on my watch, the new text will be there.

  Why can't I not made aware all the time on my watch when I get a text message? As isn't that kind of the gist of this watch in addition to reading time? It's really * me off.

  You will need to check your settings on the app shows. The watch will only receive notifications if the iPhone is locked. See this Apple Watch user's Guide information page. http://help.Apple.com/watch/#/apdb50fd440a

• iPhone 6 will not make a sound when I receive messages

  MY iPhone 6 will not make a sound when I receive messages.  What can I check to see what is the problem?

  If it makes sounds of other alerts, calls, etc. :

  Settings > sounds > your text >

• How can I get a light flashes when you receive calls if you can call silence please

  How can I get a light flashes when you receive calls if you can call silence please

  Hello Linda08,

  Go to setting/general/accessibility, walk down for hearing and toggle "Flash LED for alerts"

• Apple Watch not detected when I stand

  Apple Watch not detected when I stand

  Hello

  Hourly settlement is achieved when you get up and move for at least a minute during this time.

  Apple Watch uses an accelerometer to identify the movement, so market a minute of all about your arms swinging naturally succeed.

  Repeat this procedure in each of the 12 hours separated throughout the day to reach the daily target of Stand (completing the blue ring to Stand on your application activity icon).

  More information:

  Use the activity on your Apple Watch - Apple Support

  http://www.Apple.com/watch/health-and-fitness/

• How do I get sound when I receive by e-mail

  How do I get sound when I receive mail

  Go to control panel | Sounds and put the sound for new mail Notification. Then, in OE, go to tools | Options and check the box that says read a sound message when new arrives.

  Steve

• Xperiaa Z3 Compact restarts when you receive calls.

  My 2 month od Z3 Compact it recharges when it receives calls from inncoming. This happens especially if all other apps are open or in use, not when the phone is just "inactive". Tried to WCDMA, GSM, WCDMA (peferred) GSM and WCDMA/GSM - no change of LTE (preferred).

  Traveled 'repair phone' support ' new install (?) - no change.

  Tried to restore the factory - no change.

  Every time that happens the incoming call is not registered as "missed calls" in the call log.

  Tempted to throw!

  The phone worked without any problem, because I'm back. Another thing I noticed: the phone works quite a bit 'cooler '. Before that I sent in, could hardly touch the back after 10-15 minutes of active use on the net or "candy overwhelming." I don't know Excactly what caused what to break. It was overheated, which makes the failure of the motherboard or motherboard causing the heat?

• How the Apple Watch manages activities when I switch the time zone?

  How the Apple Watch is managing the activities and objectives when I change the time zone?

  On a long distance flight with a time zone difference of nine hours, what would be the best time to switch to the time zone of the airport of destination, so that the objective of settlement can be completed, even if there is a shorter nine hour day?

  I did mine on the plane, he took no effect until he got a signal when we arrived at the airport. I guess you must ensure that your rings are made before you change the time zone.

  I found that you had to get all your exercises in the hours that were left in your day shortened to your destination.

• Can the Apple Watch warn me when friends are nearby

  I thought I read somewhere that if your friend also had a Apple Watch and has been ranked in your friends on your watch, if you're nearby, you may receive an alert.

  Is this possible?  I tried to read how this could be done, but have not found something on this subject yet - or I'm not framing the right to the issue.

  I use Watch OS2 and of course, I have a friend who has a Apple Watch as well.

  Hello

  You can refer to find my friends, which is an app iPhone Notification alerts of this app on your iPhone can be mirrored to your watch.

  More information:

  https://iTunes.Apple.com/GB/app/find-my-friends/id466122094?Mt=8

• Will you be able to download nike + Apple Watch 2 series when it becomes available in October?

  I was wondering if the only difference between the two watches is only the version of the Nike + is delivered with the perforated Strip sport and preloaded with software Nike +? Two things that theoretically could be added to the series 2 shows at a later date.

  If I had to bet, I would say that you will be able to download the Nike + app to any Apple Watch, as well as the faces and other accouterments of software, but the group will be probably exclusive to the Nike + Watch version.

  That is, I doubt that the band will be sold stand alone.

• Apple Watch and sound does not

  I think I resound hearing aids and using the latest app with more than IOhone 6s and Apple Watch.

  IT is located to imitate iPhone. However detect the updated iPhone software 9.3.1 I have to restart the phone and watch in order to make them work with the app to resound. I've never had to before this last update. Is anyone having this issue. Apple doesn't work with the accessibility issue well and needs to step it up.

  Apple and resound und is change for me but this must be a priority for Apple during the upgrade of software and to ensure that the watch is upgraded as well life. I have also uninstall the app to see the watch resound and reinstall every day to make it work.

  Help, please

  James

  Hi James

  Helps resolve problems with your third-party application, as a first step, it is best to contact the developer of the app:

  More information:

  http://www.resound.com/contact

  http://www.resound.com/hearing-aids/apps/control-app

  http://www.resound.com/SmartApp

• I want to access have a beep sound when I receive a new email. It is more the fact.

  I no longer hear a beep when I receive a new email.  Please let me know how to turn it on again. Nobody seems to know how to do it.

  My e-mail program is hotmail.

  You will need ot ask the experts of Hotmail in this forum.

  Windows Live Solution Center Hotmail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=1

• audio does not work when making/receiving calls on my iphone 6s in my car

  Whenever I try to make or receive a call via my car hands-free kit, there is no sound through

  Have you tried to use your speakerphone with another phone? This will show you whether functional or broken. If it works, I think you should try the following steps.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• [SPA112] No sound when the outgoing call

  I installed my new SPA112 with an EdgeRouter.

  Router config:

  Pass port 5060-5061 to the SPA112

  Before port 16000-17000 to SPA112 (also tried 10000-35000)

  SPA112 Config:

  NAT: EXT IP, Keep Alive (my ISP does not use a STUN server, tried another server STUN, still the same problem)

  Line: Mapping enabled NAT, NAT Keep Alive.

  The SPA112 is registered with the SIP server.

  The problem:

  When I call someone, the person can here me, and I can here the person.

  When someone calls me, I can here the other person but the other person can't here me.

  See the TXT for incoming and outgoing call.

  Incommingcall.txt: Problem with audio to go to the other person

  Outgoingcall.txt: No problem with audio

  When I call someone, the other person hears me and I hear them.

  Of the most important messages for outgoing calls ( incoming , below). Commented by me.

  [0:0]CC:STUN OK:192.168.1.8->83.247.45.219, 5060->5060 16388->16388

  STUN has detected that your external address is 83.247.45.219, the same port numbers by NAT.

  [0]->212.45.38.48:5060(979)INVITE sip:064.....[email protected]/*  */ SIP/2.0Via: SIP/2.0/UDP 192.168.1.8:5060;branch=z9hG4bK-f6bed01From: "3134.....99" [email protected]/*  */>;tag=b66f15e1852bc1c4o0To: [email protected]/*  */>Remote-Party-ID: "3134.....99" [email protected]/*  */>;screen=yes;party=callingCall-ID: [email protected]/*  */CSeq: 101 INVITEContact: "3134.....99" [email protected]/*  */:5060;ref=3134.....99>User-Agent: Cisco/SPA112-1.4.0(001)
  
  o=- 136114 136114 IN IP4 83.247.45.219c=IN IP4 83.247.45.219m=audio 16388 RTP/AVP 8 18 2 0 100 101a=rtpmap:8 PCMA/8000a=ptime:30

  Call setup. Audio stream Incommimg asked to be sent to 83.247.45.219:16338. It is in the transmitted range (16000-17000).

  [0]<<212.45.38.48:5060(817)
  SIP/2.0 183 Session Progress
  Via: SIP/2.0/UDP 192.168.1.8:5060;received=83.247.45.219;branch=z9hG4bK-da26c2e5
  From: "3134.....99" [email protected]/*  */>;tag=b66f15e1852bc1c4o0
  To: [email protected]/*  */>;tag=SDhgdq997-127.0.0.1alUtKGp-09645+1+5c310006+2c2bae2a
  Call-ID: [email protected]/*  */
  CSeq: 102 INVITE
  Server: Alcatel-Lucent 5020 MGC-8 8.1.0.16.SP8.5
  Contact: [email protected]/*  */:5060;transport=udp>
  
  o=- 3656610554 3656610554 IN IP4 212.45.38.48
  c=IN IP4 212.45.38.48
  m=audio 63808 RTP/AVP 8 101
  a=ptime:20
  a=rtpmap:8 PCMA/800

  Of the other answer for call setup. Coming out of the audio stream asked to be sent to 212.45.38.48:63808. He is outgoing don't stream so no special arrangements on recalcitrant NAT. It doesn't look good in the direction of the cabin, is not so surprising that it worked.

  When someone calls me, I can hear the other person but the other person can't hear me.

  
  Most important messages for incomming call (for outgoing see above). Commented by me.
  

  [0]<<212.45.38.48:5060(789)
  INVITE sip:3134.....[email protected]/*  */:5060 SIP/2.0
  Via: SIP/2.0/UDP 212.45.38.48:5060;branch=z9hG4bK8jld5h207grg5v4up6m0.1
  From: [email protected]/*  */:5060;user=phone>;tag=SDgcm0c03--45026-3668cfa-2d96f01c-3668cfa
  To: [email protected]/*  */:5060;user=phone>
  Call-ID: [email protected]/*  */
  CSeq: 1 INVITE
  Contact: [email protected]/*  */:5060;transport=udp>
  
  o=HuaweiSoftx3000 1115218122 1115218123 IN IP4 212.45.38.48
  c=IN IP4 212.45.38.48
  m=audio 63316 RTP/AVP 8 101
  a=rtpmap:8 PCMA/8000
  a=ptime:20
  

  Configuration of incoming call. Coming out of the audio stream asked to be sent to 212.45.38.48:63316. He is outgoing don't stream so no special arrangements on recalcitrant NAT.

  [0]->212.45.38.48:5060(918)
  SIP/2.0 200 OK
  To: [email protected]/*  */:5060;user=phone>;tag=430df31719850825i0
  From: [email protected]/*  */:5060;user=phone>;tag=SDgcm0c03--45026-3668cfa-2d96f01c-3668cfa
  Call-ID: [email protected]/*  */
  CSeq: 1 INVITE
  Via: SIP/2.0/UDP 212.45.38.48:5060;branch=z9hG4bK8jld5h207grg5v4up6m0.1
  Contact: "3134.....99" [email protected]/*  */:5060>
  Server: Cisco/SPA112-1.4.0(001)
  Remote-Party-ID: "3134.....99" [email protected]/*  */>;screen=yes;party=called
  
  o=- 165329 165329 IN IP4 83.247.45.219
  c=IN IP4 83.247.45.219
  m=audio 16392 RTP/AVP 8 100 101
  a=rtpmap:8 PCMA/8000
  a=ptime:30
  a=sendrecv
  

  Our response to the incoming call configuration. Audio stream Incommimg asked to be sent to 83.247.45.219:16392. It is in the transmitted range (16000-17000). It seems not good in the direction of the cabin. According to statistics BYE...

  P-RTP-Stat: PS=990,OS=166160,PR=594,OR=142560,PL=0,JI=0,LA=0,DU=17,EN=G711a,DE=G711a

  ... SPA112 sent 166160 B/990 packets of audio data at the other end. I see no outgoing audio problems. Call person to hear. Well, despite the packages are OK at the time, they may not be the same at the receiving end. You have active SIP ALG feature on EdgeRouter? SIP - LG is known for having questions about so many routers, which one of the Uniquity. In addition, you should not combine STUN on SPA112 with SIP - ALG on router. Please turn off ALG SIP on the router. If it does not solve your problem, then ask provider upstream assistance. We need SIP & RTP packets captured on the side of the trunk. A note unrelated to your problem. It seems that you SIP-> settings-> value 0.030 RTP toRTP packet size . It's a suboptimal value for your upstream provider (in fact it is bad everywhere in Europe). Your provider uses 0.020 (according to the settings specified in the INVITATION). Consider the same value. It can increase the sound quality (for the end-user of the other).

  This message contains information related to the site of the other so it may contain information considered to be sensitive or confidential.

  Consider the notation of the useful comments. It can help others find solutions.

• Is it possible to get Yahoo to play a sound when I receive email?

  I would like Yahoo to beep whenever I get the mail, I can not find a way to do it and don't even know if it's possible. Any help would be great. BTW, Youtube, media player and all other sounds just right.
  Thank you

  Hi, you could try the add-on X-notify.

  Hope that helps.