How the Apple Watch manages activities when I switch the time zone?

Similar Questions

• Apple Watch not detected when I stand

  Apple Watch not detected when I stand

  Hello

  Hourly settlement is achieved when you get up and move for at least a minute during this time.

  Apple Watch uses an accelerometer to identify the movement, so market a minute of all about your arms swinging naturally succeed.

  Repeat this procedure in each of the 12 hours separated throughout the day to reach the daily target of Stand (completing the blue ring to Stand on your application activity icon).

  More information:

  Use the activity on your Apple Watch - Apple Support

  http://www.Apple.com/watch/health-and-fitness/

• When moving in different time zones, how to keep timely events?

  When I put an event in PST at the exact time in which it will happen and then change the time zone, the event moves to another time. I have not shot time zones. Some events move and others keep time. How can I get all the events to keep time?

  Events are created in the time zone that the Mac is currently defined in support of regardless of the time zone setting. When you change the time zone of the Mac, the events will appear to change the time since they will now display the event in the current time zone.

  Allowing the use of zone:

  • Adds a dropdown in the toolbar menu. You use the menu to change the time zone in which include all events. For example, an event for 12:00 Pacific time is shown at 7: 00 GMT.
  • Also allows you to set the time zone for each event. For example, if you set an event at 7: 00 GMT and then choose Pacific Time in the drop-down list in the toolbar, this event is posted at 12:00

• How to get the time based on the time zone?

  Hi all

  I try to get timestamp based on the time zone I assign in the computer... for example right now I m CA, if I change the time zone of the computer IS, and use time get Sec.vi, I always get time to CA.

  and not the ACC at EST time... How can I get the time according to the time on my laptop?

  Think I remember vaguely that LV reads this parameter when loading, then try to restart LV after changing the time zone and see if that helps.

• How is it updated managed with JPG files created in a zone time and copied on a PC in another time zone?

  I took a picture in France 5 / 31 at 13:45. The unit was set to the time European (France).  That evening, I copied the file to the SD card for my laptop that has been arrived at the normal time of the Center. When I looked at the Date modified time stamp it shows 5/31 at 06:45. It was the exact time that the image was created in France by using the CST. Why? How Vista handles this area in this case, and how he knew the zone I was in that?

  Hello Mike,.

  There's no magic here, if I can understand how it may seem so.  Hard drives now use the NTFS file system, which stores all dates and times in universal time coordinated (UTC), formerly GMT.  When you view the file information, Vista applies the time zone selected by the user to correct the UTC value in local time before posting.  Some electronic devices also store files in UTC format, and of course your camera is one of these.

  Mr. Doug in New Jersey

• How to: set the time zone on a new event before adding it to the calendar?

  I want to add a new event to the calendar, but when I do gets set to a time zone from the casablanca time which means GMT, I want to solve it the current time zone of users.  What is happening now is that if the user manually changes the time zone then the start time of the event changes too.

  Here is my code so far:

  EventList _eventList = null;
                  try{
                      _eventList = (EventList)PIM.getInstance().openPIMList(PIM.EVENT_LIST, PIM.READ_WRITE);
                  }catch(PIMException e){
                      Dialog.inform("PIMException : " + e.getMessage());
  //                  return false;
                  }
  
                  BlackBerryEvent bbEvent = (BlackBerryEvent)_eventList.createEvent();
                  java.util.Calendar cal = java.util.Calendar.getInstance(); 
  
                  long start = cal.getTime().getTime();
                  if (_eventList.isSupportedField(Event.START)) {
                      bbEvent.addDate(Event.START, 0, start);
                  }
                  if (_eventList.isSupportedField(Event.END)) {
                      bbEvent.addDate(Event.END, 0, start + 3600000);
                  }
                  if (_eventList.isSupportedField(Event.SUMMARY)) {
                      bbEvent.addString(Event.SUMMARY, 0, title);
                  }
                  if (_eventList.isSupportedField(Event.LOCATION)) {
                      bbEvent.addString(Event.LOCATION, 0, address+", "+city);
                  }
                  if (_eventList.isSupportedField(Event.)) {
                      bbEvent.addString(Event.LOCATION, 0, address+", "+city);
                  }
                  Invoke.invokeApplication( Invoke.APP_TYPE_CALENDAR, new CalendarArguments(CalendarArguments.ARG_NEW, bbEvent) );
  //
  

  How can I set the time zone before calling Invoke.invokeApplication?

  OK, never mind, my Simulator has been updated with the different time zone, I thought he would pick uop, the right one.  Once I manually put itt o the right zoneit works as expected today.

• to change the clock to the time zone of the East, but it is not in my time zone tab, how do I fix

  to change the clock to the time zone of the East, but it is in my time zone tab is downloadable

  http://www.pchelpforum.com/Windows-Vista-7/103836-how-change-Windows-Vista-time-zone-clock-Eastern.html

  http://WindowsXP.MVPs.org/timezones.htm

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-display-of-dates-times-currency-and-measurements

  Hope this works

• U410 - cannot connect after Windows Update after restore factory when the time zone is not UTC-8.

  Steps to reproduce the error:

  1 use OneKey recovery to restore the initial factory settings.

  2. on the initial setup of Windows screen, select a time zone to UTC - 8, UTC (London)

  3. connect to Windows, open the Windows Update control panel and click on "Install updates"

  4 restart the computer to complete the update.

  5. on the login screen, try to connect or shutdown the computer.

  Result:

  Computer is blocked with the only desktop wallpaper and mouse pointer visible. Does not meet all the keys. By pressing the power button sleep machine. Press again on he wakes the machine in the blocked State.

  I have reproduced this problem 3 times for initial help restore every time.

  Wordaround:

  Before starting the factory restore processes, set the clock of system by 24 hours. After the end of the restoration of the factory, set the system clock to the correct time.

  Otherwise, wait 24 hours between a factory reset and try to install the Windows updates.

  Analysis:

  This problem is caused because of the way that Windows stores time. It assumes that the system clock is set to local time rather than UTC. When you use the OneKey recovery system he doesn't know what time zone of the system clock is set on, and so it assumes that it is set to UTC - 8. If it is in fact the UTC value, OneKey Recovery creates files with a time stamp of 8 hours in the future. This causes the Windows Update to fail.

  One step that I forgot to mention, that may be important:

  After the installation of the plant, during the initial configuration screens, I updated the time zone GMT London.

  Since the OneKey recovery uses GMT - 8, this can cause some files to have a timestamp of 8 hours in the future. Maybe if I waited 8 hours before the update of this problem would not occur. I'll test this by setting the clock system for 1 week in the past, make reset factory and then it retroactively to the correct date before the update.

  EDIT: Test successfully. This workaround works.

• Having a problem in DateFormat when the time zone is changed...

  Hi, the following code converts a Date string to a Date which I am able to successfully... The problem I am facing is when I put the Moble zone as the format of Casablance (GMT) and my Format for a Date string is "2009-09-27 03:02:00:00 of" "" then I am to get the hour of the date as "kills Sep 27 03:02:00 GMT 2009", but when the time zone is changed to Canberra, Sydney (+ 10), the Date is "Mon Sep 28 19:37:13 Australia/Sydney 2009"... which is not the correct date in strgin Format ' "» nicely in this matter helps no matter what time zone after the conversion, I should get the date given to a string date... help kindly with respect to thei...

  public static Date getDateTmeFrmStrgFormat(String strDate)
       {
  
           Date date;
           String month,day,year,hour,min,sec;
                       month = strDate.substring(0,strDate.indexOf("/"));
              if(month.length() < 2) month = "0" + month;
  
              strDate = strDate.substring(strDate.indexOf("/") + 1);
  
              day = strDate.substring(0,strDate.indexOf("/"));
              if(day.length() < 2) day = "0" + day;
  
              strDate = strDate.substring(strDate.indexOf("/") + 1);
  
              year = strDate.substring(0,strDate.indexOf(" "));
  
              strDate = strDate.substring(strDate.indexOf(" ") + 1);
  
              hour = strDate.substring(0,strDate.indexOf(":"));
              if(hour.length() < 2) hour = "0" + hour;
  
              strDate = strDate.substring(strDate.indexOf(":") + 1);
  
               min = strDate.substring(0,strDate.indexOf(":"));
              if(min.length() < 2) min = "0" + min;
  
              strDate = strDate.substring(strDate.indexOf(":") + 1);
  
              sec = strDate;
              if(sec.length() < 2) sec = "0" + sec;
  
              //sec = "00";
              date = new Date (HttpDateParser.parse(year + "-" + month + "-" + day + " " + hour + ":" + min + ":" + sec));
              //date = new Date (HttpDateParser.parse(year + "-" + month + "-" + day + " " + hour + ":" + 00 + ":" + 00)); 
  
              return date;
          }
  

  Like this.  This code is NOT tested, it is presented only to explain the use of the calendar in this situation.

  public static Date getDateTmeFrmStrgFormat(String strDate)     {         String month,day,year,hour,min,sec;         month = strDate.substring(0,strDate.indexOf("/"));         strDate = strDate.substring(strDate.indexOf("/") + 1);         day = strDate.substring(0,strDate.indexOf("/"));         strDate = strDate.substring(strDate.indexOf("/") + 1);         year = strDate.substring(0,strDate.indexOf(" "));         strDate = strDate.substring(strDate.indexOf(" ") + 1);         hour = strDate.substring(0,strDate.indexOf(":"));         strDate = strDate.substring(strDate.indexOf(":") + 1);         min = strDate.substring(0,strDate.indexOf(":"));         strDate = strDate.substring(strDate.indexOf(":") + 1);         sec = strDate;         Calendar cl = Calendar.getInstance();         cl.set(Calendar.YEAR,|Integer.parseInt(year));         cl.set(Calendar.MONTH,|Integer.parseInt(month)-1);         cl.set(Calendar.DATE,|Integer.parseInt(day));         cl.set(Calendar.HOUR_OF_DAY,|Integer.parseInt(hour));         cl.set(Calendar.MINUTE,|Integer.parseInt(min));         cl.set(Calendar.SECOND,|Integer.parseInt(sec));         return cl.getTime();     }
  

• Change the time zone in CS-MARS 5.3.2

  When I try to change the time zone (with: "set time zone") on the CLI of MARCH, I was evicted and the session is closed... Who knows what to do?

  Best regards, Robbert

  I just had exactly the same thing happen on a 100th test running 4.3.2. The message was something about "session timeout" (you can not see unless you connect to the session in Putty). I don't know exactly how I corrected. I configured NTP and tried later... still logged on. I then changed the time-out settings in admin-> system settings and tried later in... still logged on. I change the settings for timeout back and all of a sudden I wasn't be disconnected. Not exactly what fixed it, but probably one of those things.

• Calendar entry for flights crossing the time zones

  I fight to find the right method to enter a calendar event that starts in a time zone and ends in another.  It is often the case for the flights of the airline.  Example: My departure is from New York (JFK) at 12:00 noon Monday and arriving in Seoul, Korea is at 16:24 (local) Tuesday.  I cross the road to the International Dateline. With Support for time zones "lit", how to capture these moments so that they are accurate, once arrived in Seoul?

  Even more difficult: due to cross the International Date line on my return, I arrived in New York earlier that my time of departure the same day.

  Any suggestions on how to deal with this would be appreciated!

  Paul

  If you enable support for time zones, each entry includes the time zone setting. Select the correct time zone for each. Move real time you you include an entry in the "travel time" drop-down menu. Otherwise enter time manually and identify the zone in the title.

• Cannot set the time zone of Moscow winter + 3 hours.

  Cannot set the time zone of Moscow winter + 3 hours.
  Set the time zone Minsk 3 after the GPS clock moves forward 1 hour, timezone is set back from Moscow + 4.
  It is an error of your software when you are ready to address this issue.

  Automatic deactivation date & time(Settings>Date&Time...)

• to try to correct the time zone schedule probs w/xp

  I'm trying my timezone and it won't work, or if it's hard to find exactly the right download. I live in the area (Florida) Eastern time and my clock is off. as now, the actual time is 15:11 and my comp says 02:49. How can I fix? {Furthermore, I'm not comp wiz, simple terms would help a lot... haha: 0}

  Hi imsukr8zee,

  Thank you for visiting the community Microsoft Windows XP.  To change the time on your computer, follow these steps:

  1. right click on the time located on the right side of your screen.

  2. Select Adjust Date/time.

  3. click the time zone tab and make sure the correct time zone is selected.

  4. click on the Internet time tab and make sure that there is a check in the automatically synchronize with a time server Internet and the box Server time.windows.com.

  5. click on update now if changes have been made.

  6. click apply and then OK.

  Please let us know if this helped.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I want to change the time zone in standard time, but it is not located in leFuseau horaireonglet

  I want to change my time zone to count at the normal time, but it is not in the time zone tab

  Hello

  ·          How are you trying to change the time zone?

  ·          You can see all the other time zones are included in the list?

  Please refer to:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-the-clock

• do not get the time zone on the basis of the city.

  Hello guys, I'm getting the time zone based on the region,

  As America/LosAngelies(-8);

  But I want that on the basis of the town as London(-7) and Adeleid (+ 5);

  How can I achieve this. Help, please.

  Resolved.

  Use the method of getDisplayNames (0). For time zones the device all.