Applicable of the telco switch numbers
In preparation for a deployment with card UC540 PRI the telco asked two questions that we were not sure about and he wanted to see if someone could throw a light issues
3. What is the number of applicable figures (figures we send you our switch)?
4. are there any unacceptable lead figures in the applicable numbers?
Thank you in advance.
The number of allowed digits that you accept depends on your dial plan. Applicable numbers represent the amount of numbers that the telco sends to you for your gateway can process and forward the call. If you use the four digit extensions then you should accept four.
Tags: Cisco Support
Similar Questions
-
that comes with the laptop activation key is not applicable to the type of windows installed
Hello. I try to activate my windows with the product key that I saw at the back of my laptop but a habit of working because it says that its not applicable to the ultimate windows that is installed on my laptop... his view are rather than I run windows 7 all upward rather than windows 7 ultimate... I don't know how to do this. Help, please. Thanks :)
Recovery of your computer (Windows) using "Recovery Partition" of the Manufacture or
contact PC manufacturing (see support links below) and order the recovery media.Note: Activation is not required when you use the recovery partition or recovery media, but you will need to reinstall all your applications.
Also to save your documents on external support (if possible) before starting the recovery process.
Once completed, your PC will be actually in the State when you first purchased it and turned on for the 1st time.
To access the recovery Partition, start your computer, and then by pressing the appropriate function key. It can be either F1, F2, F9, F10, F11, F12, DEL or tab key. Check the list below or your user manual for your brand and model.
If your hard drive has failed, do not have a recovery partition or the recovery partition is not accessible,
Then, you must contact the manufacturer support team and ask for a "recovery disc" which allows to reinstall Windows 7.How access/start the process of recovery of the manufactures listed below.
Acer: Press and hold ALT + F10, as soon as you see the logo
http://Acer.custhelp.com/app/answers/detail/A_ID/2631
Acer support: http://www.acer.com/worldwide/support/
Acer recovery support: http://store.acer.com/store/aceramer/en_US/eRecoveryAdvent: restart your computer, then the immediate start by pressing the [F8] key or the F10 key.
The fastest way to restore your computer is to use the hard disk recovery tools. You can access them by restarting your computer and then pressing the [F8] key or the F10 key until the Advanced Boot Menu appears. Use the arrows to select "Repair your computer", then press [Enter]. Read all of the instructions on the website of advent and made your choice as to the action you want to perform: http://www.adventcomputers.co.uk/restore-or-reinstall-windows-your-computer
Support: http://www.adventcomputers.co.uk/product-support/support-servicesASUS: Press or press the F9 key as soon as you see the Asus logo.
http://support.ASUS.com/troubleshooting/detail.aspx?SLanguage=en&m=X53E&OS=&no=1775
ASUS support: http://support.asus.com/contactus.aspx?SLanguage=enDell: Press F8 directly after switching on / to start the computer
Recovering detail instructions:
http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=DSN_362066
http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=52182
Dell support: http://www.dell.com/support/home/us/en/19?c=&l=&s=
Or: http://www.dell.com/EMachines: hold the Alt key and hold press and release the key F10
http://Techchannel.RadioShack.com/eMachines-system-recovery-1747.html
Support: http://www.emachines.com/ec/en/US/content/supportFujitsu: Press F8 several times directly after switching on
https://answers.Yahoo.com/question/index?QID=20110406074143AAcx1Zw
Support: http://www.fujitsu.com/global/support/Gateway:
http://www.ehow.com/how_6297937_restore-gateway-laptop-factory-settings.html
https://support.gateway.com/s/software/Microsof/Vista/7515418/7515418su531.shtml
Support: http://www.gateway.com/worldwide/support/HP Notebook: Usually to begin recovery process press the F10 key, power on the computer
HP Mini: Press F11 directly after switching on / to start the computer
http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01867418&cc=us&destPage=document&LC=en&tmp_docname=c01867418
Support: http://www8.hp.com/us/en/contact-hp/ww-contact-us.htmlLenovo uses the F11 key to launch the restore process:
http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-4UFUYK
Directions for Lenovo OneKey Recovery, hidden partition and recovery DVDs:
https://support.Lenovo.com/us/en/documents/ht077384
and: http://support.lenovo.com/en_US/detail.page?DocID=HT077144
Support: http://support.lenovo.com/en/supportphonelistHow to run Lenovo Onekey Recovery
http://support.Lenovo.com/en_US/downloads/detail.page?docid=HT062552
Detailed as follows: http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=127597018499211You can also find parts of this article from Lenovo worth reading:
http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-4VFUDULG: Press F11 directly after switching on / to start the computer
Support: http://www.lg.com/Packard Bell: Turn on your computer. When Packard Bell logo is displayed, press in and hold the ALT key while pressing the F10 key several times. Release the keys when a message that Windows is loading files.
After the system recovery program has loaded follow the instructions to reinstall the operating system.
Support: http://www.packardbell.com/index.htmlSamsung: Press the F4 key to the Samsung logo when you turn on first of all of the computer.
Support: http://www.samsung.com/Sony VAIO Windows 7: restart and press "F10".
https://CA.en.KB.Sony.com/app/answers/detail/A_ID/35585/p/48903, 49902,71663,71664/c/65,67/kw/recovery%20using%20f10
Sony VAIO Vista: Restart and press "F8" repeatedly until the screen "Advanced Boot Options".
https://us.en.kb.sony.com/app/answers/detail/a_id/41931/~/how-to-perform-a-system-recovery-using-the-vaio-recovery-center.
https://us.en.KB.Sony.com/app/answers/detail/A_ID/41949/session/L2F2LzEvdGltZS8xNDA4MjI2NTAzL3NpZC8qWVBPbCpfbA%3D%3D
Support: http://www.sony.net/SonyInfo/Support/Toshiba: Press on F12 or the value 0 (zero) key on the top of the keyboard (not the zero on the numeric keypad key)
and at the same time, press the button power once to turn on your laptop.
When the Toshiba screen appears; release the 0 key.
References: http://www.mytoshiba.com.au/support/items/faq/71
http://forums.Toshiba.com/T5/system-recovery-and-recovery/how-to-perform-system-recovery-Windows-7/Ta-p/279643
Support: http://www.toshiba.co.jp/worldwide/Windows 7 - location of the Partition Recovery and information.
"Configurations of drive partitions using the BIOS has recommended.
Note: Check the diagrams of this article
http://TechNet.Microsoft.com/en-us/library/dd744364%28WS.10%29.aspxJ W Stuart: http://www.pagestart.com
-
How to set up the virtual switch vmnet0 so in fact, it behaves like a switch.
Hello
I have a problem:
My configuration is:
host of CentOS 5.3 using vmware server 1.06
3 clients (all centos 5.3 with vmware tools) installed
web01
DB01
backup01
The three guests have public ip and use the bridged (vmnet0) network
The backup01 backups web01 and db01 every night.
My supplier can see that traffic on its poort switch that connects the host to the internet, and he wants to charge me for it.
The three guests (and host) are all on the same subnet. It is the local subnet traffic that does not use a gateway.
It seems the traffic between hosts is diffuse on my physical eth0 on the host. When I have some files between guests, it also appears on the page from my supplier of PCs followed AY. (Just likecommunication between 2 physical host computers are on the local network when you use a hub instead of a switch)
I thought it was probably the only way to vmware would work when using network bridges. Because the host doesn't know anyting on the clients ip numbers.
But when googleling abot this I found several docuemtents (for vmware server 2) telling me that vmnet0 is actually a sort of virtual switch.
If this is true this virtualswitch should know other mac adressess clients (arp who a..) and she must stop the internal traffic to leave the material.
Is not what is happinging. It looks more like a virtualhub instead of virtual switch.
So I was wondering if there are ways to configure the vmnet0 somehow. I was hot, but I can't find anything about it.
I don't want to change the bridged mode or coz internal use of the intellectual property of the plan is to spit the separate web01 and db01 to vmware guests in the furture.
Does anyone have any suggestions?
My idea was to put an additional physical switch between me and my switch to suppliers, but that seems to be a ridiculous solution.
Any help is welcome.
Concerning
Hans Groot
VMserver don't use virtual switches: it uses virtual hubs. They are mislabeled - probably because "virtual switch" sounds more sexy than "virtual hub".
You can't change their behavior to be more like a switch
___________________________________
-
When I try to open the pages or numbers on my iMac I get "new version required.
When I try to open the pages or numbers on my iMac so that I get "new version required" open documents saved I must login to iCloud and open from there. Why? These same documents are readily available on my iPad. I bought both programs and all updates are current. Not very happy with this complicated route I take to work on a document
Any suggestions
< re-titled by host >
You attempted to open a document v5 of Pages via the file picker Pages ' 09. Exit Pages ' 09 and then double-click on the same document to open it in Pages v5. You will not have this problem on iOS, because iOS Pages or Pages for iCloud open the two versions of the documents.
-
If I move the cursor over the letters or numbers that they snap up bright. In about 30 seconds, they return to the hazy State. This only happens on Firefox. not to explore or my regular computer programs.
This can be caused by incompatible Firefox with your graphics card driver. To test this theory, try to disable the use of Firefox hardware acceleration of graphics and fonts.
the button Firefox orange (or the Tools menu) > Options > advanced
In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.
It will take effect after you exit and then restart Firefox.
Any difference?
-
Is it possible to get the option "Switch to tab" higher when you type in the awesome bar?
Hello
I am currently under the latest version of Aurora and although I really like it, there is one thing that has bothered me kind of. I am often under more than 100 tablets at once and all of them to find the desired search tab takes a long time, so I would like to use the function "Switch to tab", but more often than not, this option is very far down the list of suggestions, causing me to miss them. So I would like to know if it is possible for this option as one of the first suggestions, instead of putting down in the list.
Thanks in advance,
xMyth
Hello xMyth, I don't know if that's exactly what you're looking for, however when you start your search in the address bar with % it will be limited to open compressed only...
-
The switch to the new tab page is not there in the upper right. Where is he?
If browser.newtab.url has been "grayed out" subject: config it's probably because it's already the default value, which is of about: newtab... so you don't need to reset. Since you have to reset the preference browser.newtabpage.enabled (to true, by default) then the "toggle switch" should appear, as shown here:
If browser.newtabpage.enabled is now fixed to true and that you still don't see the "switch", you can try Search reset the module that will restore the parameter browser.newtab.url (as well as other preferences related to research and the homepage) to the default value.
-
How to prevent activation of the application switcher function the central button of the mouse
I use a mouse third with a scroll wheel (button 3) as the central button of the mouse. How can I prevent this activation of the application switcher function button?
System Preferences > mouse allows you to assign actions to the buttons on the mouse. Some mice come with their own drivers/preferences.
-
Satellite Pro M70-275 - where is the lid switch?
Hei,
I have problem with backlight in my laptop (Toshiba Satellite Pro M70-275). I think that the problem will be solved completely if I find where is the button of the cover.
I hope someone can help and guide me to the location of the switch.
THX
Hello
Are you sure that the problem is the lid switch? Normally if the backlight doesn t work on the screen inverter FL needs to be replaced.
What happens if you connect an external monitor to the laptop? You see an image?The FL switch is normally placed under the cover of the display. It s a little trickier to Exchange because it is necessary to remove the plastic cover of the screen.
Maybe you should ask a technician for laptop to help. -
Tecra S11 - bluescreen when the WiFi switch is on
I've known several accidents suddenly blue screen, with apparently no advice. After several tests of different conditions I counted it takes place when the WiFi switch is on. So, it should be associated with Bluetooth or WiFi.
Any suggestions how to proceed further? apparently I have the latest drivers (Windows 7 64)
Thanks, GuidoHey Buddy,
Have you already checked the BIOS if you have installed the latest version? If this is not the case check this on the Web from Toshiba site and make an update of the BIOS. Maybe it helps
But I had a similar problem last year and the solution was exchanging the WLAN card.
I think your Tecra S11 should still be under warranty and in this case that the repair will be free. :)
-
What is the difference between "numbers - iCloud" and iCloud Drive/numbers
When I choose to open or move in a document, for example, numbers, the default path is "numbers - iCloud", but I can also choose iCloud drive who has a record numbers it contains. They seem to have the same files, but it's hard to be sure that I can not navigate on "" numbers - iCloud "as a normal file."
I guess "numbers - iCloud" are left compatibility by iCloud Drive has been here before. But what I really want to know is, is it fair to 2 different ways to get to the same place, is it important that I use?
I use numbers 2.3 as the removal of the sidebar in 3 numbers makes it unusable for me.
Hello BrotherKz,
Thank you for using communities of Apple Support.
I see that you have questions about the differences between numbers to iCloud and for your Mac and how/where they record documents in the cloud. The following provides information on the numbers for iCloud:iWork for iCloud Support - numbers for iCloud
Of those who support the articles, it responds to what expect you when you upgrade your iCloud account to use iCloud drive:
Best regards.
-
I lost my iPhone 5 and the "Cell" switch is off. How can I turn back on from another phone so I can activate "Find my phone"?
You can not. There is no method to remote turn on/off all the settings on the phone. The only thing you can do is put it in mode lost through the computer and it remains to be seen if the device connects to a known Wi - Fi network. Otherwise, you'll just go out and pick up the old-fashioned way. You have it in Mode plane, or you just disable cellular data?
-
Re: Equium L40 - Windows 7 and the wireless switch
I upgraded my Equium L40 to Windows 7 and now, wireless equipment and F8 function switch switch the WLAN on and outside. It is permanently.
Also, even if it is enabled in the Windows 7 power options, close the lid won't be thecomputer to sleep. If I close it turns off the screen but doen't make Windows 7 options.
When I upgraded to Windows 7, I chose the option to do as a new installation and therefore lost my Vista installation.
I have download all the drivers for Windows 7 on the Toshiba site, even if there were not many.
Is there something else I need to do for the WLAN switch and cover works with Windows 7? Any help gratefully received.
See you soon,.
Ray D
> I have download all the drivers for Windows 7 on the Toshiba site, even if there were not many.
What L40 you exactly (L40 - xxx). I just want to check if your model of laptop is fully supported for Win7. -
Disable the snap on the grid of numbers
I have a late 2009 27 "iMac running the OS X Yosemite 10.11.3.
I use version 3.6.1 numbers and Pages version 5.6.1
Where can I turn off the snap on the behavior of the grid and smoothly to an object exactly where I want that he shook to the top or to the bottom of the grid? I have not found any literature that says how to disable it.
Any help would be appreciated.
Thank you.
Number, select the menu item "numbers > Preferences.
Select the segment "Rulers", then uncheck all the boxes "Show Guides... »
OR hold down the command key while dragging to temporarily turn off the guides
-
Tecra 9100: How to enable the WLan switch?
Hi, new here.
I have trouble getting the Toshiba Wireless LAN Mini PCI Card to work.
I installed all the latest drivers on the Toshiba site.
It is activated in windows and the switch on the front of the laptop is on. 6 led is off.
The FN + F8/Wireless icon button does nothing.Windows repeat me any available wireless network.
When I try and turn on the wireless card switch network device software Toshiba it just says, 'wireless communication is disabled. Please activate the wireless communication switch. »
The switch on the front would be tired?
Any help would be greatly appreciated.
Thank you
Oceaness
Hello
I guess the 6 LED's LED wireless card.
This LED should shine when you activate the WLan switch on the side of the laptop.
Looks like you have not activated the WLan switch.
I put t know exactly where the WLan switch, but you should check the front of the laptop near the headphone jack.Check it out.
Then the LED should shine and you must activate the antenna with the FN + F8 key combination.
Maybe you are looking for
-
DLL calling convention set-match?
I'm convering an application in a DLL and everything seems to work except when I call it from a stub application I get a Non-fatal runtime error "CVI has detected and the inconsistency of the execution stack" Debugger dialog box when the DLL function
-
Create recovery disks or Flase Drive
I buy the HP ENVY Sleekbook 6-1080ex 5 October 2012. But I'm not yet create recovery disc or usb drive flase. I can create recovery disc or usb flase dirve still now. Is it possible to copy content or the recovery partition data & it works like a fla
-
Access MyBookLive NAS cannot drive with Windows 8.1
My NAS drive was working fine until I left for two weeks. I went home and it was not connected. I tried remapping and I keep getting the error code 0 x 80070043. the network name cannot be found. I tried evrything even a system restore. Nothing works
-
Win 7 cannot find the driver on the laptop to HP Deskjet 5600 connected to the office via WLAN
I have HP Deskjet 5650 color printer connected to desktop Dell Dimension 2400 under Windows XP Home Edition Ver 2002 SP3. I just bought a laptop Dell Inspiron N4110 running Windows 7 Home Premium SP1 64 bit. I am trying to connect to the printer via
-
ISE comments 1.4 certificate
Hello I have configured ISE 1.4 for the first time and I have a problem with the certificates. I have a signed certificate stored in the system certificates system and I can connect on ISE without certificate messages. How can I do for comments and p