Tecra S11 - bluescreen when the WiFi switch is on

Similar Questions

• Tecra S11 - 11G - external monitor flickers when the Wifi is enabled

  I have a similar problem on my brand new Tecra S11 - 11G. The only difference is that the problem is present only when I have my laptop plugged in and turned on WiFi radio.

  If I turn the Wifi radio off and keep the laptop connected to the power source, the external screen keeps flickering. If I keep the WiFi radio and disconnect it from the power source blinking stops, too.

  I reported this problem to Toshiba customer to the Portugal (where I bought it) and they gave me the ticket case #710008193. They said that they would not replace the defective unit and that I should leave for repair. It is absolutely amazing because the laptop is brand new. A customer still expects to have a well work product when needed out of the box without having to call the repair man. I think it is their obligation to replace the damaged aircraft. In addition, this laptop is part of a fleet of the company who buys only Toshiba laptops and we are talking about a Tecra and not a Satellite. We deserve more respect from Toshiba.

  In a year or two, I have a new laptop (company policy) and it surely won't be a Toshiba.

  > They said they would not replace the defective unit and that I should leave for repair. It is absolutely amazing because the laptop is brand new

  That is why amazing? A hardware malfunction can still happen and this happens not only in the world of the computer/laptop. Therefore, manufacturers provide a service to a client and failure may be fixed and covered by the warranty.

  > A customer still waiting to have a well work product when needed out of the box without having to call the repair man. I think it is their obligation to replace the damaged aircraft

  Of course you are right, but in the reality of things happening.
  My PS3 died after a short period of time. It has been fixed and replaced under warranty conditions, but this isn't a reason for me to say; I would not buy PS3 more because of this problem.
  My BMW had some engine problems, that it was fixed under warranty and I would buy this car again once because this car is great and I think other builders are no better, and I think this would also happen to other manufacturers

  That s my personal opinion in the opinion

  Greetings

• Problem sending pictures through texting when the WIFI

  I recently move carrier to Cricket wiresless (Yes uses AT & T network) of the Sprint. Since I made the change, I had problems sending pictures through texting when the WIFI. I contacted the Cricket Wireless support and they had me reset the APN settings, he has to work because I also disabled WIFI at the time. Since then, I realized that I don't have the problem, when I cut the WIFI.

  Someone at - it similar problems?

  I found the resolution on Adroid Central:

  Wow! Presented this to the customer service email of Cricket and they responded in 12 minutes confirming:
  Billy M. (Cricket Wireless)
  16 Dec 08:46

  Hi Evan,

  Please contact the Support of Cricket. I'm sorry to hear about the problems you are having with your MMS then on the WiFi. Our team of network has been aware of this problem and is currently working on a resolution. In the meantime, you can use one of the IP addresses below in your MMS proxy under the APN settings that should solve the problem.

  192.168.196.78
  192.168.196.79
  192.168.196.117
  192.168.196.118

  Thank you
  Billy
  Looks like the guys from reddit were correct and the IP addresses are legitimate.

• Tecra S11 - FN + F5 won't switch to VGA screen

  I have a problem with the Tecra S11 series.

  When I press the FN + F5 button to poster that the system refuses to respond to my request and automatically comes back on the LCD screen. (Or in the case of an external VGA monitor to the monitor).

  Because of this problem, I am unable to switch between the screen of my laptop and my VGA monitor when I want to work in my office.

  I found a few ways around this issue, like the mode of presentation, but this isn't the way it is intended.

  Can someone help me with this problem?
  I already tried to install either the 'Hotkey utilities for display devices"and"change of display device. Both packages try to start, give the cmd.exe window and then the error output a "; Installation Failed. "message.

  More information about the system:
  Toshiba Tecra S11 - 11G (PTSE3E)
  Operating system: Windows XP (company policy).
  BIOS version: 2.20
  THIS version: 1.70

  I hope someone has an idea about this.

  With respect,
  Rik

  According to portable documentation this laptop came with Windows XP Home edition installation disc.
  This Toshiba WXP recovery image is installed on your system s WXP own Tecra or company?

  As a rule, what you need is:
  # V6.06.03 TOSHIBA common modules
  # TOSHIBA Hotkey Utility for V3.5.1.0 display devices
  # TOSHIBA screen device utility change V3.2.1.0

  These three tools are important for the functionality of FN + F5.
  Do you use the VGA VGA cable or an adapter?

• Tecra S11 - what are the two primary partitions for?

  Hello everyone

  I just got myself a new Tecra S11 with Win7 64 and there is one thing that has me littlebit wondered.
  In total, there are four partitions, there are for sure the recovery a (1.46 GB) and the system a (256,38 GB), but then there are also two primary partitions (8.86 and 31.38 GB) without displayed use or file system. There is no unallocated space.

  Can someone tell me what are these two partitions? I want to split the system partition to store my data on a separate, if possible I also want to use that 'unknown' space then ;)

  Besides that: don't worry, I already have recovery DVD.

  Greetings
  Nico

  I put t know why you now have the new structure of the partitions, but the important thing is that you create recovery DVDs and if something goes wrong with the preinstalled recovery image OS or HARD drive you can use DVDs for the installation of the OS.

• Re: Tecra S11: two questions - No. WiFi and USB number after sleep

  Except the treble sounds high I got 2 other problems.
  I use pre-installed Windows 7 64 bit and the drivers are up-to-date

  1 connection Wi - Fi card after some time just laptop usage does not work, I need to go and turn my wi - fi card from the windows Device Manager to operate

  2 standby or Hibernate mode when the awakening of my machine, my mouse that is connected to the usb port does not work - I need to plug in and again once the cable to the usb port and it works fine

  Any ideas what may be wrong?

  I put t know what the problem may be, but what you can try is updating the BIOS.
  Is the latest version on your laptop Tecra?

• Tecra S11-128 on the external screen flashes

  Gentlemen.
  I have two problems.

  1st. If I use the S11-128 with the provided power supply and an external LCD display, a distracting flickering effect is visible. It disappears if I run the laptop off the battery or with an old Tecra M2 supply (2004, electrically equivalent). My faulty power or is it a common behavior?

  2. I wrote a polite and detailed message, but the language of the forum filter does not let through, so that you get a condensed version X-(X -)

  TIA,
  Paolo

  > 1st. If I use the S11-128 with the provided power supply and an external LCD screen, a distracting flickering effect is visible. It disappears if I run the laptop off the battery or with an old Tecra M2 supply (2004, electrically equivalent). My faulty power or is it a common behavior?

  These symptoms are typical for the land issue.
  I much read about flicker on external monitors, while the laptop is connected to the power adapter.
  In most cases, a 3Pin adaptor cable might solve this problem.

  I recommend that you get in touch with an ASP local and order this cable.

• AT200: Android 4.0.3 - Toshiba Media Player crash when the WIFI is enabled

  I have improved my AT200 to Android 4.0.3 and I am not abel to use Toshiba Media Player when my WIFI connection is enabled.

  If I turn it off, I can't start Media Player but when I activate it I can't start it?

  TIA

  When all my PC's are running on the network Media Player is started and showing me all the multimedia server on the network

• Computer stops when the wireless switch is turned on

  I have a Toshiba Satellite M-35 S456 with Windows XP Home Edition.  When I turn on the switch on the bottom of my laptop wireless, the screen flashes blue with a message and then stops.  The computer tries to restart, but during the process of the blue screen flashes again and it stops.  If I switch the switch wireless to the computer will restart.  I am trying to connect to the internet via a router which is already set up and running.  All solutions?

  Hi MartinLaMarr,

  ·         What is the Blue error screen that you are talking about?

  ·         If so, have you noticed the blue screen error message?

  Check to see if the following is useful.

  Method 1: Unplug non-essential devices from the computer and restart the computer.

  Method 2: Try to select disable automatic system failure reboot since the options of start menu advanced to know the Blue error screen.

  a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  b. use the arrows to choose to turn off the automatic restart in the event of system failure in the Advanced Options of Windows Start Menu and press ENTER.

  Method 3: Updated with the latest wireless drivers and other drivers of devices from the portable computer. Log in the Web of Toshiba site to do.

  Content Page Model - Toshiba Satellite M-35 S456

• Failed to load the message when the wifi or data are disabled...

  I get the message "could not load. Please check your internet connection and try again ' when I unlock the screen or disconnect the wifi connection or data.  I am not in a position to say what app it is, how can he know whether the app is the cause?

  The message now seems to have disappeared when I uninstalled a few 3rd party applications.  My guess is it could be one of them or a recent update of a few apps.  I however, in the future, will be the option of restarting mode safe in mind if it happens again.  Thank you for your help.

• Close application when the application switch menu item to invoke

  Hello, I made application for blackberry (os 5,6,7), but it has a strange behavior.

  When I press the switch application menu item, my request is close, so I can't get back to my application once I switched to another application.

  I have replace my onClose to be like this

  public boolean onClose()
  {
  This.Close ();
  Returns true;
  UiApplication.getUiApplication () .requestBackground ();
  getApplication () .requestBackground ();
  Returns true;
  }

  but the problem remains.

  Please help me solve this problem

  When you change your application, the close method is not pushed directly so I think that you look elsewhere this

  Try to use the Application Switch with an application example - say the sample HelloWorld application.  I think he won't, which suggests that the problem is in your application.

  There are three places to look:

  (a) the Application disable method is pressed when the request is sent to the background.  Maybe you have coded it and it closes the application

  (b) you have a certain type of background processing controls (isForeground()) and reacts according to what it finds.

  (c) in the method onObscured() to one of theFields/screen on the display at once.  .

  Other than that, I think you're looking for a general bug in your application.  The starting point is to look at the debugging log when you do this - look for anything from your application you consider odd.

• F2 key is no longer active / disable the wifi switch card

  I have laptop Dell mini. The F2 key is no longer active / disables the power switch wifi card. It is always disabled. The device is present, it seems to be a software problem. I uninstalled the drivers and them was reinstalled. I even completely reinstalled Windows 7. Nothing will get my F2 key works again.

  Happy, it's kind of better.

  Consider going to Dell support for new copies of their public services - things with names like

  Dell Wireless enable / disable

  Dell function keys

  that is, no matter what the equivalents are for your system. I just had a peek at one of the Minis because I didn't know you had and these names seem to be utilities controlling the special Dell configured keyboard keys [including F2 is a].

  If you sign in with your Service tag, it just goes to show that you updated utilities & drivers but at the top of the list, right next to a label with your serial number on will be a tab for all models of type - leaf through as you don't care if something is an updated version you need to replace a utility that does not work properly.

  Good luck

• Tecra A2 - connected to the WIFI router, but cannot browse

  Hi and help!

  I have a Tecra A2 and using the huawei HG520b router, I have a connection ok, but cannot navigate. Been in contact with my provider, had 2 hours of help and they say it's a problem with my laptop.

  I've updated the driver WLAN and now am losing to live... any suggestions would be great. Thank you

  Hello

  Did you check if your router has an Internet connection? If your router doesn't have a connection, you are not able to navigate through the Internet.
  Check this box!

  In addition, it would be interesting to know what browser you use. You can test another like Firefox or Opera?

• Computer laptop Qosmio F15 does not illuminate when the power switch / stop is pressed

  My Toshiba Qosmio f15-av201 does not turn when you push the power button, even if the lights of ac adapter & battery are both on (on). Indeed, the yellow light that is supposed to turn on the power button when the laptop is turned off does not appear. In addition, there is no sign that shows the laptop tries to start when the button is pressed, not even a peep. The laptop was recently dismantled (open) to clean the fans, who made the famous monstrous noise which toshiba qosmios are apparently well known for.
  Everything seems to be connected correctly in its correct place. Nothing seems to be damaged. So, I have no idea where I can get out of here.

  Help will be less appreciated.

  Thank you

  I agree with kody. Of course, it is not easy to say with certainty why this happens. Who tore your laptop? Service or only you?

  To be honest, I think you did it alone. Have you used maintenance manuals?

• Netflix and YouTube apps crash when the WiFi is enabled

  iPhone 6 - IOS 9.1 - Netflix, YouTube - latest versions (as of 05/12/15) - apps launch, show their splash screen and then immediately crash / close without error message. Router is an Asus rt-ac68u fw 3.0.0.4.378_9313 - question is the same on 2.4 and 5 GHz
  As soon as I turn off WiFi apps work fine - other applications that use the Internet, work fine on WiFi - its just Netflix and YouTube acting upward - and Netflix and YouTube work fine on all other devices in the House - htpc, laptop, android phone, etc.

  So far the troubleshooting steps: uninstall and reinstall applications phone power cycle, reset the WiFi settings, reset the phone to default settings = no change

  Any ideas or and I stuck waiting for IOS 9.2?

  The is probably something in the system software is corrupted and causing the accident. You have two options:

  Restore the phone from a backup

  OR

  If this does not resolve the problem, restore the phone as a new installation of a new copy of iOS 9.1. This one is a bit of a pain, because you have backup you data and then re sync everything (including applications). You may lose data in some applications as you won't be restoring a backup.