Application abandoned during the copy of the project PPLTLS84CUR, designer

Similar Questions

• Update Windows XP SP3 is abandoned during the installation of UNIDRV. DLL and displays the message "the system cannot find the file specified."

  When the update of Windows XP is install SP3, the sequence is abandoned at the location of the process.  After you download the SP3, the progresses set install through the normal initialization sequence, inspection, creating list of 3rd drive part, backup files, etc., begins to install the files but when to reach the "UNIDRV. The installation of the file "DLL" stops and I get a message "the system cannot find the file specified".  The close message will invalidate all the installation and possible automatic restart.  I did not locate a UNIDRV. DLL file and copy it to my C:\ root directory but have tried almost everything in the 22/01/12 'terribrownQF' and the response "Tommy Stanley" 22/01/12 no change where the installation of SP3 crashes.  Should I try to put the UNIDRV. DLL file on my computer?  Any other ideas?

  Please respond to each of the following diagnostic questions in a numbered list type in your very next answer (no need to quote this post):

  1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application ALREADY installed on the computer?

  3. do you have a free trial Norton or a test of free McAfee [CHOOSE ONE ANSWER] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. why has not been installed SP3 years? [1]

  5. is Firefox, Chrome or any other alternative browser installed?

  6. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. CCleaner)?

  7 have you ever had the opportunity to do a repair install or clean install of Windows XP for some reason any?

  =====================================================================
  [1] note: support for WinXP SP2 ended the July 13, 2010! "Computers running WinXP SP2" will no longer receive software updates from Windows Update "[i.e., updated on and after August 2, 2010 so now that you're missing more than two years worth of updates to security critical! ] until SP3 has been installed.

• VIX API is abandoned during the call to VixJob_Wait()

  We use the following code fragment to copy files to and from a guest operating system. The code is running on Ubuntu 8.04.

  -

  ---

  jobHandle = VixHost_Connect (VIX_API_VERSION,

  PORT,

  host,

  HOSTPORT,

  esx_username,

  esx_password,

  0,

  VIX_INVALID_HANDLE,

  NULL,

  (NULL);

  ERR = VixJob_Wait (jobHandle, VIX_PROPERTY_JOB_RESULT_HANDLE,

  (& hostHandle, VIX_PROPERTY_NONE);

  Vix_ReleaseHandle (jobHandle);

  jobHandle = VIX_INVALID_HANDLE;

  If (VIX_FAILED (err))

  {

  fprintf (stderr, "Could not connect to host ("FMT64"%d \n %s)", err,) ")

  Vix_GetErrorText (Err, null));

  RETURN_CODE = VIX_API_COULD_NOT_CONNECT_TO_HOST;

  GoTo error;

  }

  jobHandle = VixVM_Open (hostHandle,

  vmpath,

  NULL,

  (NULL);

  ERR = VixJob_Wait (jobHandle, VIX_PROPERTY_JOB_RESULT_HANDLE,

  (& vmHandle, VIX_PROPERTY_NONE);

  -

  ---

  When the host is a server ESX (version 3.5 or 4.0) code succeeded 100% of the time.

  When the host is a vCenter Server 4.1 code gives up about 15% of the time during the call to VixJob_Wait.

  When it does not reach the output of the program is:

  -

  ---

  (process: 27760): GLib-GObject-WARNING *: type invalid uninstantiatable "gdouble" cast iron "GObject".

  (process: 27760): GLib-GObject-CRITICAL *: g_object_get_data: assertion 'G_IS_OBJECT (object)' failed

  (process: 27760): GLib-GObject-WARNING *: type invalid uninstantiatable "gdouble" cast iron "GObject".

  (process: 27760): GLib-GObject-CRITICAL *: g_object_notify: assertion 'G_IS_OBJECT (object)' failed

  (process: 27760): GLib-GObject-WARNING *: instance of type non-instantiatable invalid "gdouble.

  (process: 27760): GLib-GObject-CRITICAL *: g_signal_emit_valist: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed

  (process: 27760): GLib-GObject-WARNING *: type invalid uninstantiatable "gdouble" cast iron "GObject".

  (process: 27760): GLib-GObject-CRITICAL *: g_object_notify: assertion 'G_IS_OBJECT (object)' failed

  (process: 27760): GLib-GObject-WARNING *: instance of type non-instantiatable invalid "gdouble.

  (process: 27760): GLib-GObject-CRITICAL *: g_signal_emit_valist: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed

  (process: 27760): GLib-GObject-WARNING *: type invalid uninstantiatable "gdouble" cast iron "GObject".

  (process: 27760): GLib-GObject-CRITICAL *: g_object_get_data: assertion 'G_IS_OBJECT (object)' failed

  (process: 27760): GLib-GObject-WARNING *: type invalid uninstantiatable "gdouble" cast iron "GObject".

  (process: 27760): GLib-GObject-CRITICAL *: g_object_notify: assertion 'G_IS_OBJECT (object)' failed

  (process: 27760): GLib-GObject-WARNING *: instance of type non-instantiatable invalid "gdouble.

  (process: 27760): GLib-GObject-CRITICAL *: g_signal_emit_valist: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed

  (process: 27760): GLib-GObject-WARNING *: type invalid uninstantiatable "gdouble" cast iron "GObject".

  (process: 27760): GLib-GObject-CRITICAL *: g_object_notify: assertion 'G_IS_OBJECT (object)' failed

  (process: 27760): GLib-GObject-WARNING *: instance of type non-instantiatable invalid "gdouble.

  (process: 27760): GLib-GObject-CRITICAL *: g_signal_emit_valist: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed

  • ERROR *: file /build/mts/release/bora-127388/bora/vim/lib/gvmomi/gvmomiSession.c: line 1253 (gvmomi_session_invoke_method): failed assertion: (NULL == g_hash_table_lookup (session - & gt; private - & gt; listenerTable, listener))

  aborting...

  -

  ---

  Is the trace of gdb

  -

  ---

  (gdb) thread 1

  #0 0xb7f9e410 in __kernel_vsyscall)

  (gdb) bt

  #0 0xb7f9e410 in __kernel_vsyscall)

  #1 0xb7dc1085 in raise () from /lib/tls/i686/cmov/libc.so.6

  #2 0xb7dc2a01 in abort () from /lib/tls/i686/cmov/libc.so.6

  #3 0xb7b204f7 /usr/lib/vmware-vix/lib/VIServer-2.0.0/32bit/libglib-2.0.so.0 g_logv)

  #4 0xb7b20529 /usr/lib/vmware-vix/lib/VIServer-2.0.0/32bit/libglib-2.0.so.0 g_log)

  #5 0xb7b205a7 (/usr/lib/vmware-vix/lib/VIServer-2.0.0/32bit/libglib-2.0.so.0 g_assert_warning)

  #6 0xb7624969 in? (from /usr/lib/vmware-vix/lib/VIServer-2.0.0/32bit/libgvmomi.so.0)

  #7 0xb7740125 (/usr/lib/vmware-vix/lib/VIServer-2.0.0/32bit/libgvmomi.so.0 vmodl_vim_virtual_machine_acquire_mks_ticket)

  #8 0xb6ff7935 in? (from /usr/lib/vmware-vix/lib/VIServer-2.0.0/32bit/libvix.so)

  #9 0xb6ff8098 in? (from /usr/lib/vmware-vix/lib/VIServer-2.0.0/32bit/libvix.so)

  #10 0xb7ac94fb (/usr/lib/vmware-vix/lib/VIServer-2.0.0/32bit/libgobject-2.0.so.0 g_cclosure_marshal_VOID__VOID)

  #11 0xb7abc06b (/usr/lib/vmware-vix/lib/VIServer-2.0.0/32bit/libgobject-2.0.so.0 g_closure_invoke)

  #12 0xb7accc93 in? (from /usr/lib/vmware-vix/lib/VIServer-2.0.0/32bit/libgobject-2.0.so.0)

  #13 0xb7ace187 (/usr/lib/vmware-vix/lib/VIServer-2.0.0/32bit/libgobject-2.0.so.0 g_signal_emit_valist)

  #14 0xb7ace339 (/usr/lib/vmware-vix/lib/VIServer-2.0.0/32bit/libgobject-2.0.so.0 g_signal_emit)

  #15 0xb7623261 in? (from /usr/lib/vmware-vix/lib/VIServer-2.0.0/32bit/libgvmomi.so.0)

  #16 0xb7628be4 in? (from /usr/lib/vmware-vix/lib/VIServer-2.0.0/32bit/libgvmomi.so.0)

  #17 0xb7629817 in? (from /usr/lib/vmware-vix/lib/VIServer-2.0.0/32bit/libgvmomi.so.0)

  #18 0xb7ac94fb (/usr/lib/vmware-vix/lib/VIServer-2.0.0/32bit/libgobject-2.0.so.0 g_cclosure_marshal_VOID__VOID)

  #19 0xb7abc06b (/usr/lib/vmware-vix/lib/VIServer-2.0.0/32bit/libgobject-2.0.so.0 g_closure_invoke)

  #20 0xb7accc93 in? (from /usr/lib/vmware-vix/lib/VIServer-2.0.0/32bit/libgobject-2.0.so.0)

  #21 0xb7ace187 (/usr/lib/vmware-vix/lib/VIServer-2.0.0/32bit/libgobject-2.0.so.0 g_signal_emit_valist)

  #22 0xb7ace339 (/usr/lib/vmware-vix/lib/VIServer-2.0.0/32bit/libgobject-2.0.so.0 g_signal_emit)

  #23 0xb7623261 in? (from /usr/lib/vmware-vix/lib/VIServer-2.0.0/32bit/libgvmomi.so.0)

  #24 0xb7624bb8 in? (from /usr/lib/vmware-vix/lib/VIServer-2.0.0/32bit/libgvmomi.so.0)

  #25 0xb762e9c2 in? (from /usr/lib/vmware-vix/lib/VIServer-2.0.0/32bit/libgvmomi.so.0)

  #26 0xb700baed in? (from /usr/lib/vmware-vix/lib/VIServer-2.0.0/32bit/libvix.so)

  #27 0xb700a807 (/usr/lib/vmware-vix/lib/VIServer-2.0.0/32bit/libvix.so Poll_LoopTimeout)

  #28 0xb6fa6fe9 in? (from /usr/lib/vmware-vix/lib/VIServer-2.0.0/32bit/libvix.so)

  #29 0xb7089bf3 in? (from /usr/lib/vmware-vix/lib/VIServer-2.0.0/32bit/libvix.so)

  #30 0xb7a9b4fb () from /lib/tls/i686/cmov/libpthread.so.0 start_thread

  #31 0xb7e6ce5e in clone () from /lib/tls/i686/cmov/libc.so.6

  (gdb) thread 2

  #0 0xb7f9e410 in __kernel_vsyscall)

  (gdb) bt

  #0 0xb7f9e410 in __kernel_vsyscall)

  #1 0xb7e62c07 () from /lib/tls/i686/cmov/libc.so.6 survey

  #2 0xb708ad57 (/usr/lib/vmware-vix/lib/VIServer-2.0.0/32bit/libvix.so SyncEvent_Wait)

  #3 0xb6fa55d2 (/usr/lib/vmware-vix/lib/VIServer-2.0.0/32bit/libvix.so VixJob_WaitVargs)

  #4 0xb7f657cf (/lib/libvixAllProducts.so VixJob_Wait)

  #5 0x08048b71 in main)

  -

  ---

  Is anyone know the cause of the problem, and if there is a fix?

  Thank you

  Ian

  He has all the symptoms of a bug in Vix which has been fixed in version 1.8. When Vix tries to open a virtual machine on a system of video conferencing with multiple data centers, there is a race that could cause memory corruption.

  Update should fix the problem.

• Orphaned application modules during the uninstallation?

  I have an application that downloads the cod and installs using the CodeModuleManager class.

  But after that I deleted the application, the modules installed by it remain.

  Am I missing something here?  Modules should not be deleted as well?

  The real solution is to create the module group where you will store the libraries in.   Add your group as a dependency to the library group.

  Now if you delete your group, the library group gets served.

• Access the Application scope during the onApplicationEnd

  I'm updating the settings stored in my database in the onApplicationEnd method where they have changed since they were loaded the application.
  
  My code is below:
  
  < cfquery datasource = "#Application.datasourceName #" >
  SQL STATEMENT
  < / cfquery >
  
  I get the error that says "DATASOURCENAME Element is not defined in the APPLICATION."
  
  What can I do to pass to pass the application variables to onApplicationEnd? I tried the code below that I found on the internet and it seems to make no difference.
  
  < cfargument name = "applicationScope" required = "true" >
  
  Thanks in advance for the help!

  If the copy is passed as "applicationScope", shouldn't you use:

  
  ?

• Not a win32 application invalid during the Windows 7 upgrade download

  I am trying to download windows 7 upgrade advisor, and it is not a valid win32 application. I am currently running xp, 32 bit. Help, I want to get windows 7.

  original title: not a win32 application valid?

  Hi Rainsdancer,

  Follow the suggestions below for a possible solution:

  Method 1: You can follow the steps in the article and check if it helps.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

   

  Method 2: I suggest to download the different location and run the Advisor of 7upgrade windows and check the results. Here is a link to download the Upgrade Advisor.

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7?T1=tab02

  32-bit and 64-bit Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  Installing Windows: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/installing-Windows-frequently-asked-questions

  In addition, you can consult the links mentioned below a similar question.

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/589c0300-95f5-48e3-98AB-4342a30cc1e1

   

  http://social.technet.Microsoft.com/forums/en/w7itproinstall/thread/e0ee8143-2e54-4fc7-80EA-00b91f6cb57d

  Hope this information helps.

• get the Application Module during the invocation of Taskflow delimited

  Hello dear developers,

  I have a filter that maps just before the Faces Servlet and fill some attributes in the HttpSession before it proceeds with the request

  [...]

  If (_clientUser! = null & &! _clientUser.isEmpty ()) {}

  session.setAttribute (CLIENT_USER_URI_PARAM_NAME, _clientUser);

  filterChain.doFilter (servletRequest, servletResponse);

  return;

  }

  [...]

  There are some practical information for which task flow should be addressed within the URI,

  faces/ADF. Task-Flow? ADF.tfId = Task-Flow-Definition-ID & adf.tfDoc=/WEB-INF/task-flow-definition-id.xml

  After I continue the application there is a method call within the bounded workflow that is called before the display (allows to call the current view), making it default business

  [...]

  activity < default > doStuff < / default activity >

  [...]

  The method itself is in a Managed Bean PageFlowScoped, which is added to the task-flow-definition - id.xml

  This is the method that is called before the "MainPage"-view of doStuff ".

  public class {controller

  [...]

  public void doStuff {}

  FacesContext ctx = FacesContext.getCurrentInstance ();

  Card sessionMap = ctx.getExternalContext () .getSessionMap ();

  String clientUser = (String) sessionMap.get (CLIENT_USER_URI_PARAM_NAME);

  AppModImpl am = getApplicationModule();

  DBTransaction transaction = am.getDBTransaction ();

  do more things

  }

  [...]

  }

  public AppModImpl getApplicationModule() {}

  FacesContext fc = FacesContext.getCurrentInstance ();

  Application app = fc.getApplication ();

  ExpressionFactory elFactory = app.getExpressionFactory ();

  ELContext elContext = fc.getELContext ();

  {ValueExpression valueExp = elFactory.createValueExpression (elContext, "#{data.", Object.class "}") AppModDataControl.dataProvider};

  AppModImpl m = valueExp.getValue (elContext) (AppModImpl);

  am back;

  }

  Everything works well so far. But if I try to get the Module of the Application. There is not.

  This app normally isn't any what DataControl, because is just a root application which different components of blocks that have been added by ADFLibrarys, but I added a DataControl to the DataBindings.cpx and an iterator for the MainPagePageDef (just to understand a DataControl in links) but still no result.

  Do you have any tips for me how I can access the application Module? FacesServlet should have been already created the necessary FacesContext managed Bean is called at the moment or it only creates a new FacesContext time a real (jspx/jsf) Page loads?

  Yours,

  Matthias Schnell

  I got a response:

  Here is the block message that has helped me to understand.

  Andrejus Baranovskis Blog: How to fix error of initialization of the control Data with the ADF libraries

• How to get the properties of application anywhere in the project?

  Hello

  Application

  | __Component1

  | ___Component2

  | ___Component3-> Component4 (in Popup)

  It is the actal scenario in my flex application...

  You know a better way to access the properties on the Application object?

  I want to put the popup component in the middle of the screen of the browser...

  for this, I tried the way...

  -Part 4

  <! - PopupWindow.mxml - >

  " < = xmlns:fx s:Group ' http://ns.Adobe.com/MXML/2009 "

  xmlns:s = "library://ns.adobe.com/flex/spark".

  xmlns:MX = "library://ns.adobe.com/flex/mx" >

  < s:layout >

  < s:VerticalLayout horizontalAlign = "center" verticalAlign = "middle" / >

  < / s:layout >

  < s:BorderContainer id = "bcPopupWindow" width = "700" height = "500" backgroundAlpha = "0.8" borderAlpha = "0.5".

  borderVisible = "true" cornerRadius = "20" dropShadowVisible = "true" >

  == Design part ==

  < / s:BorderContainer >

  < / s:Group >

  and to show that
  in tier 3.
  protected function btnShowPopup_clickHandler(event:MouseEvent):void

  {

  myPopup = new PopupWindow();

  myPopup.width = this.parent.parent.parent.width;

  myPopup.height = this.parent.parent.parent.height;

  PopUpManager.addPopUp (myPopup, this, true);

  }

  Hello

  to access the application (IE higher level) use (for example, width), Application.application.width (for flex 3) or FlexGlobals.topLevelApplication.width (for flex 4)

  PS: you can use PopupManager.centerPopup (myPopup) to Center

• Guard application launch at the start of the appliance, also need advice for the implementation of network methods

  Hi all

  I'm new to the development of Blackberry and I'm writing a relatively simple application to run on 7.1.

  So far the development was interesting, I managed to create my user interface using resources online (mainly this forum), but today I tried to implement some of the network classes that I need and now I just met constant problems.

  I use Eclipse SDK 3.7.2 (the one that comes with the plugin RIM)

  First question:

  I'm not sure what I changed, but today I noticed that whenever I start the Simulator (by sim 9360) my application is started during the initial startup process. I don't think he did this before, but to be honest, I wasn't paying much attention. I think it starts at the start of the device is because I put a breakpoint in the constructor for my class from the main screen, which is hit before the Simulator happens even to the point where it is ready for user interaction. In addition, once it is ready, if I press the BB button, I see my registered application.

  I don't have it set to automatic start in .xml descriptior enforcement.

  I started this application on the HelloBlackBerry sample, here is my main method for the entry of the application:

  public static void main( String[] args ) {
          appSettings = AppSettings.fetch();
          // Create a new instance of the application and make the currently
          // running thread the application's event dispatch thread.
          HelloBlackBerry theApp = new HelloBlackBerry();
          theApp.enterEventDispatcher();
          //openConnection();
  
      }
  
  
  

  As far as I know, this is the only entry point for the application.

  More code

      public HelloBlackBerry() {
          // Push a screen onto the UI stack for rendering.
          mainScreen = new ScreenHelloBlackBerry();
          pushScreen( mainScreen );
      }
  

  Here is the method of. my class AppSettings fetch()

      // Retrieves a copy of the effective properties set from storage.
      public static AppSettings fetch()
      {
          AppSettings savedSettings = (AppSettings) _store.getContents();
          return new AppSettings(savedSettings);
      }
  

  Some of this code that I wrote myself, the persistence store cause the launch of my car?

  I tried to reset the Simulator to the factory settings, no change.

  All applications initialized during the startup of the device and then closed shortly after?

  Part 2: Need advice for the implementation of functions of network in the application

  I need to implement some methods that will retrieve data from a web service, and I also need to send data to this service. What I've read, the ConnectionFactory is the way to go. I want my application to make a request when the application is open and can check on a set interval. I didn't know exactly how to go about adding another thread for networking, I understand that network connections should not be created on the thread main event, so I tried to do this:

  The constructor of my class that implements screen (ScreenHelloBlackBerry), I use the following to create a modal dialog box to prompt the user for a username, I also try networking wire in the same segment of spawning:

          public ScreenHelloBlackBerry(){...initialize fields and managers, add it all together...then near the end
  
  //This will open the confirm dialog when the application is launched
          UiApplication.getUiApplication().invokeLater(new Runnable() {
                public void run() {
                    openConfirmDialog();
                  //start connection - Possibly broken
                    ConnectionThread ct = new ConnectionThread();
                    ct.start();
                }
          });
  

  I don't know if it's somehow OK to do, but it seems to work for what I need. I want a user who launches the application at the prompt, and if a user switch applications, when they come back they wondered again (unless they close the app and reopen it).

  Here is my ConnectionThread:

  public class ConnectionThread extends Thread
  {
  
      public void run()
      {
  
            ConnectionFactory connFact = new ConnectionFactory();
            ConnectionDescriptor connDesc;
            connDesc = connFact.getConnection("http://www.google.com");
            if (connDesc != null)
            {
                HttpConnection httpConn;
                httpConn = (HttpConnection)connDesc.getConnection();
                try
                {
                    final int iResponseCode = httpConn.getResponseCode();
                    UiApplication.getUiApplication().invokeLater(new Runnable()
                    {
                        public void run()
                        {
                            Dialog.alert("Response code: " +
                                          Integer.toString(iResponseCode));
  
                        }
                     });
                    httpConn.close();
  
                 }
                 catch (IOException e)
                 {
                   System.err.println("Caught IOException: "
                        + e.getMessage());
                 }
            }
      }
  }
  

  At the moment it has basically unmodified code from a sample that I found, I'll be retooling to meet my needs whenever I can make it work. I HAD this work to the point where, after the closed user confirm this dialog, a few moments later a an alert dialog appears with the 302 response code. I don't know what changed, but now it doesn't work at all, and if I try to scroll with the debugger, I can't past the httpCon.getResponseCode (). I've seen some mistakes earlier on "no record of service was set up", and I also had once a timeout exception.

  I'm sure I'm doing this wrong, but at the same time as I said WAS working, and now it is not. If someone has done this far, thank you very much for your time and advice are much appreciated.

  Also, should I try to start the thread of the network of the UIApplication class instead of the screen? There is currently very little happening in the class that extends UIApplication, do I spend most of my business logic out of the class of the screen and in the UIApplication class?

  Thanks in advance!

  Hi all

  Just to conclude this topic for those who are interested, I found an excellent guide to the implementation of networks in applications of BB, click here for a link.

  About my application being started at the start of the simulator of the device, I found that on a device real this behavior is not complied with, and in addition, the behaviour seems to have stopped after uninstallation and reinstallation of my Simulator.

  See you soon,.

• iPhone 5 with 9.2.1 NEW battery drains during the night

  In recent weeks has been my iPhone battery drain from one day to the next. It will be held at 55% and the next morning completely dead. It took to Apple, they replaced my battery under warranty cause I replaced in November and reset the network settings and the device. Last night, he was about 33%, and I woke up to it quite dead. I had no running applications. During the day, it doesn't drain on hold.  It will retain 100% mode sleep during the day. Is there a bug in 9.2.1?

  Earcom2 wrote:

  Is there a bug in 9.2.1?

  N ° you happen to have installed the Facebook application?

• using office creative cloud up-to-date PSCC and CRD.  PSCC updated very well, but it froze during the update of the CRD. What to do now? Chat is closed.

  Creative desktop cloud application froze during the update.  Updated fine PSCC but LRCC froze before it has been updated.  What should I do now? Chat is closed.  ON the home screen of the creative cloud desktop application it usually shows my activity - but now it says nothing except "your hoome stream is empty.  Should I download new creative cloud app - it's corrupted?

  Hi Carol,.

  Please follow the steps below:

  (1) uninstall Adobe CC (use of the Adobe Creative Cloud cleaning tool to solve installation problems)

  (2) restart machine

  (3) install the application Adobe CC since the help document: use of the desktop application cloud creative to manage your applications and services

  Kind regards

  Sheena

• Resolution of the projected image

  During the projection of an image of a picture of PP CS6 via a projector screen, the resolution of the image on the screen is very low. The public cannot read the data on the projected image.  The laptop is already on the maximum resolution. I use the operating system is Windows 7 Home Premium on a Toshiba 64 k. Y at - it a Windows setting to the resolution of the image traditionally planned? Thanks for the help.

  What is your film resolution and frame rate, interlaced or progressive? First will create and export or make almost any video format if you have the codecs.

  Let's say that your film is full HD uncompressed, 1920x1080P. This is unlikely since hard drives and CPUs can choke on codecs uncomrpessed. If your movie has probably been transcoded to friendlier codec. I don't know about Windows Media, but on a Macintosh, we would probably use H.264. If it is still in full size HD, your video card installed is simply not able to read it in full resolution. The film is to be scaled down, pixels are shriveled up and away, thrown to fit on maximum screen size of your card. As your movie 1080, reduced about 30% to 740 at 760, comes in your upscaler is be blown back to 1080. But the information has been lost. All your upscaler can possible do make the blobby parts more large; It cannot replace the pixels that have been lost.

  Build your movie in a format 720. Make sure that all your graphics are visible on your editing screen by observing it remotely simulating the environment of the screen. Or, better, to connect the projector to your editor to get an overview of the results.

  Or use a device that is able to play 1080 full HD.

• How do 'Enum Control' disabled during the execution of an executable application and make activated when the application is stopped/abandoned?

  Hello

  I use a "Enum control" on the façade of an executable application built with application builder for LabVIEW 2013 full professional development system. I want Enum control remains activated prior to execution of this request so that I can choose any value from the list of available numeric values, but when I run this application; Enum control should become disabled so that the user can not select another value in the list of data during application execution values so that the default setting remains unchanged during the execution of this application. Enum control must also be activated when the application is stopped/abandoned so that the user can select any value.

  Could someone pls suggest a solution to this problem?  If I select the active state' to 'Disabled' in appearance tab then all listed values becomes disabled.

  Concerning

  Jamal

  I suggest to use the node property of persons with reduced mobility.  You can then disable the enum at the beginning of the program and then activate it in the judgment.

• Error message during the installation of the sound card: an error occurred during the installation of the device__ "e/s operation was abandoned because of a thread exit or an application request." _

  Hello
  I can't update the audio driver on my PC. When you try to install the driver (new sound card), I get the following message is displayed:
  There was a problem installing this hardware:
   
  An error occurred during the installation of the device
  "The IO operation has been abandoned due to a thread exit or an application request."
  The driver worked fine on this computer until a month ago. I think it's more a problem of Windows installation as a driver issue, but I do not know where to go from here. Any suggestions?
  Thank you
  I tried to install the sound card on different PCI expansion slots. I get the same message trying to install a USB sound card. The sound properties in the control panel are classified outside (non-active)

  Hello Smachbub,

  Thank you for your message.  Let's try one or two different things.  Please follow step by step.
  1. we will try to completely remove the previous sound card driver, then reinstall.
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Click on Device Manager.
  Click the (+) sign next to "sound, video and game controllers".
  Below, you should see your audio card, right click and select "Properties".
  Select the 'Drivers' tab and click 'uninstall '.
  After uninstalling the driver, reboot and go to your computer manufacture or website of the manufacturer of the sound card and download/install the latest driver for your device.
  If problems persist, try this same process as a new profile.
  2. to create a new profile:
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Double-click 'Users and groups' > select 'users '.
  In the right pane, right click and select 'add a new user '.
  Fill in the appropriate information, and then select 'create '.
  The new user must be added, right click on the new user and select "Properties".
  Select the tab "member of ' and click on 'Add '.
  Type Administrators and click on "check names".
  Once the name is entered correctly, click 'OK '.
  Log off your computer and connect with the new credentials.  Then try removing and reinstalling the driver.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• change the copy and upgrade project options

  Hello

  FSCM90 and tools 8.49

  I opened my project in the application designer. On the upgrade tab, I see that the action is EXEMPLARY and UPGRADE is checked.

  Then I run the following text in the database:

  UPDATE PSPROJECTITEM SET TAKEACTION = 0, UPGRADEACTION = 0 WHERE PROJECTNAME = "MYPROJECT"

  
  

  Can I reload the project. But again upgrade tab, I see that the action is EXEMPLARY and UPGRADE is checked.

  
  

  Why update table PSPROJECTITEM dose not change my project in the application, update TAB Designer?

  
  

  Another way to change them without doing it manually?

  
  

  Thank you.
  

  Update of tables via SQL tools is generally not supported by Oracle.

  Both explanations possible, why you do not see your updates...

  1. You didn't do your update before reloading the project.
  2. More likely, since version psprojectdefn was not changed you reloaded the original project from the cache.

  If you run the application using the Designer 2 levels that you can try to clear the cache of your office after running and committing your update sql. If you run in mode 3 levels you need to clear the cache of application server. Do not try to update the version in psprojectdefn unless the Support of Oracle is ready to provide you with the instructions to do it correctly. It requires corresponding updates to multiple tables.

  Note that upgradeaction = 0 corresponds to the action = COPY, so your sql is not really changed this value.

  In addition, if you want to change the action for all the objects in a project you can do easily in any case app designer - open the project, switch to the upgrade tab and open the grid details for any object type, and then either right-click on any object (or select Edit-> update from the main menu) and then set the Action for the project and choose copy or delete.

  You can not change flag for upgrade to a draft set of the designer of the app, but you can change it for all objects of a given type. Open the details for the type of object from the upgrade tab, and then click in the top left box in the grid (next to the heading "key ") to select all, then right click and choose UNTAG ro Tag for upgrade. Alternatively, you can uncheck specific definition types during the copy of the project. If you want to copy the definition of the project without copying the object definitions at all, just click deselect all next to the definition (s) on the database copy Panel (and copy project definition is checked, of course).

  Kind regards

  Bob