Application.CFC and CSS

Similar Questions

• Application.CFC and the directory mapping

  Hello

  We have a request that we would like to migrate to use Application.cfm to Application.cfc. It is a management application that is implemented on various websites (hosting us) with an "app directory" which is defined as a virtual site directory, with a few variables specific to the site (mostly just a couple of unique customer ID) located in an XML file at the root of each site definition offshore. In other words:

  www.site1.com is customer web app and /configfolder/appvars.xml

  www.site2.org is the same web application for client B and /configfolder/appvars.xml

  The actual application is a virtual directory, say:

  www.site1.com/Mgmt/

  www.site2.org/Mgmt/

  The /mgmt/ folder contains all the real application code - the only thing the root directories do is to hold the handle of the client-specific variables.

  "Historically, what we have done is to have an Application.cfm file in the app folder make a /mgmt/ < cfinclude template ="... / Application.cfm "> so that the same code runs for all sites, but tire of the credentials of the unique site of the folder parent site." But Application.cfm is a bit long in the tooth.

  The problem is that the server does not appear to 'find' the Application.cfc in the parent folder and I'm not sure, there is an equivalent ' cfinclude the file of a directory to the high "(sauf si vous pouvez cfinclude un CFC, dont je ne pense pas que vous pouvez le faire?)."extends"won't be not cut either because we would define a mapping to the top and know what specific Application.cfc" , we will expand when the only thing we know is that the data that we want to be in / configfolder /.

  The only solution I can think of is to use a single Application.cfc and put it in / mgmt /, transfer our customer-specific variables in the XML file, that we read in via cffile to a CF page that can be included in the Application.cfc (if we do not need to know the absolute directory name, as we do now) and then put things like Application.name dynamically , but I do not know if this is kosher. I would have preferred that each site has its own Application.cfc (perhaps by dint of him being a virtual directory?), but when you go to connect to www.site1.com/mgmt/, it does not use www.site1.com/Application.cfc. I have other traditional sites where Application.cfc 'filter' to subdirectories, but there it is in the root folder, you log in to the root folder, and when you navigate to a subdirectory, CF seems to be aware that you are always in the same application.

  I apologize if I did not explain this well and I'm pleased to say whatever it is - would appreciate advice on how to better implement Application.cfc in a scenario of multiple-sites-on-a-codebase.

  Ah, if it's a virtual folder you will have problems. The ApplicationProxy is "the way" it's done, but (as you guessed it) CF looks at the file level and is not aware of any IIS mappings.

  One reason they cannot not just in physical directories? Even using something as a junction of Windows is that they are physically located in a different place?

• Difference between Application .cfc and .cfm?

  Title says it all. I'm a little confused about the difference between Application.cfc and .cfm.
  
  I understand a little more about the .cfc, where you define the onRequestStart methods, etc.
  Yet, in one example, that I am following, they use .cfm and the tag < cfapplication >. The two seem to have called, but should I only use a single file? Or?
  
  Also, since both can be used what is the order by ColdFusion or is ignored if either is present?

  application. CFC gives you more control when the code is running. In an application.cfm file, all code in this file is processed at the beginning of each page request. With application.cfc you can assign code snippets to the appropriate method.

• The THIS Application.cfc and ranges of VARIABLES

  Traditionally this field stores the variables that are used outside the element and stores VARIABLES, well, variable, which are private to the component, right?

  I ask, because in my application.cfc BIFs (like onApplicationStart(), onRequestStart(), etc.), make calls to other components, and there are some values that are initially stored in the application.cfc that must be shared with these components (but I was told that I shouldn't do just these components inherit from the application.cfc)

  What I * WS * this has been calling these methods of a component and passing variables I * WAS * storing in the VARIABLES field as follows:

  <cfset componentObject.methodName(
       firstArg = VARIABLES.var1,
       secondArg = VARIABLES.var2
  ) />
  

  Thing, is that I found, these variables are often needed by a large number of functions throughout the application.cfc.  Should I be storing these values in the PRESENT application domain instead?  Someone told me she is sloppy to send simply all of THIS / VARIABLES of structure as an argument that is not yet defined in the function being called.

  I chose the scope of variables as this scope allows applications using my cfc to change the values of variables in their object.  I have rarely, if ever see a necessity to enable this.

  I suggest the way the values as arguments because my main use of the EFA is to produce reusable code.  In our configuration, (intranet with reusable code available for all applications), it is not sensible for a cfc directly using cfc another variables.  It might work, but it just seems wrong to me.

• New .cfc files: do I have to register with CFadministrator application.cfc?

  I use an application.cfc for the first file ANDS of time that I can not seem to operate.

  Do I need to register the application.cfc in the CF administrator to work?

  I did 2 cfc application.cfc and mylist.cfc files

  Do I need to record both of them in CF administrator?

  No, you should not register any CFCS for it to work.

  Ben Nadel has a very detailed tutorial on Application.cfc, I recommend reading through as a good starting point.  It is a little outdated because I think it has been written to CF 7, however. eference.htm http://www.bennadel.com/blog/726-ColdFusion-application-CFC-Tutorial-and-application-CFC-R

  -- 
  
  Thanks,
  
  Eric CobbECAR Technologies, LLChttp://www.ecartech.comhttp://www.cfgears.com
  

• CF 9: FC ajax is not compatible with Application.cfc?

  Hello

  Background:
  I use the Application.cfc framework.  I like the onMissingTemplate, onError, and other features that it offers.  I worked with Application.cfc since CF 7.

  I started working on a project that required of CF 9.  I wanted to use a control controls cfgrid and also some of the features of ajax for a form.  I met problems with cfgrid controls immediately.  The problem was with the attribute of link calling a remote function in a CFC.  Here is a sample of the error message that I am able to get help from? cfdebug = 1 parameter to URL:

  JSON parsing failure: expected ' "' character 2: '&' in {& quot;}" page & quot; : 1, & quot; pageSize & quot; : 10 & quot; sortColumn & quot; : & quot; & quot; & quot; SLEEP tDirection & quot; : & quot; CSA & quot ;}

  Notice that all of the characters in double quotes are somehow be transposed to be html encoded values '& quot;'.  That's what the JSON parser complains.

  I went from the tasks and began working on a simple form that uses an autosuggest feature.  While I started to test the form, I found almost the same exact error:

  JSON parsing failure: expected ' "' character 2: '&' in {& quot;}" vcSuggestValue & quot; : & quot; 5 & quot ;}

  After you change the settings without success, I decided to rename all the files in my Application.cfc and create a Basic Application.cfm file.  It worked!

  Then, I tried to find out what was broken in my file Application.cfc I thought that, maybe, I got something screwed up.  I found myself in a file like this:

  
  < cfproperty >
  < cfset myIdName = "abc_admin" >
  < cfset variables.dsn = 'abc' >

  < name cffunction output = "onRequestStart" = "true" returntype = "boolean" index = "Runs at the start of a query" >
  < name cfargument = "TargetPage" type = "string" required = "Yes" hint = "Path of the web root to the requested page." / >

  
  < cfset request.dsn = variables.dsn >
  < cfset request.vcProductName = "abc.org" >

  
  < cfreturn true / >
  < / cffunction >
  < / cfproperty >

  As you can see the file Application.cfc preceding has almost nothing in it apart from a few names and a data source definition.  Controls the cfgrid and autosuggest < cfinput > tag are still not working.

  I took my project and moved to CF 8 server where these features worked well.

  I tried to use Application.cfc on a CF 9 server running on IIS 6 and IIS 7.5.  Two of them are failing, so I do not think it is caused by the web server.

  At this point, I am inclined to think that Application.cfc features CF ajax is broken for ColdFusion 9.  If you have a solution to this problem, please reply to this message with a response.  If you have ColdFusion 9, please try a simple autosuggest field on a form and see if it works with a website of Basic Application.cfc, please reply with your results.

  Best regards
  Scott Jibben

  You probably need to add an onCfcRequest() Manager to your Application.cfc file...

  http://help.Adobe.com/en_US/ColdFusion/9.0/CFMLRef/WSe821657cd7d6f83f6daaa733122cf6931bb-8 000. HTML

  --

  Adam

• Strange problem of Application.cfc included

  It's hard to explain, so I hope this has meaning. Here goes...

  I have an Application.cfc in the root of my site that defines some variables.  I then an Application.cfc in each subdirectory (call each of these subdirectories a site) that includes the root Applicaiton.cfc.  I have also one includes the folder located in the root directory that I use in each site for pages that I shoot using the tag cfinclude referring to variables defined in the root Application.cfc and Application.cfc site.  For some reason if I touched the page in includes it the directory directly everything seems to work very well.  I can then shuts down for the pages of different site that use cfinclude to pull in files in the directory, and that works very well also.  However, if back us the next day and do not go directly to the page in the directory first and just go to one of the pages that pulls in the include files, we get an error saying that the variables in the root Application.cfc was not found.  I don't know where to start trying to debug this?

  This is all the code of the root Application.cfc less other variables:

  < cfproperty output = "false" >
  
  <!-name of the application, must be unique-->
  < cfset myIdName = "openenrollment" >
  
  <!--> run before the request is processed
  < cffunction name = "onRequestStart" returnType = exit "boolean" = "false" >
  < cfargument = 'page' type name = "string" required = "true" >
  < cfset APPLICATION.memberDisease = True >
  < cfreturn true >
  < / cffunction >

  < / cfproperty >

  This is all the code of one of the files of the site Application.cfc less other variables:

  < cfproperty output = "false" extends = "oe. Application">
  
  <!--> run before the request is processed
  < cffunction name = "onRequestStart" returnType = exit "boolean" = "false" >
  < cfargument = 'page' type name = "string" required = "true" >
  < cfset APPLICATION.group = "demo" >
  < cfreturn true >
  < / cffunction >

  < / cfproperty >

  The root of this site is in fact a subdirectory named oe that is located in the root of the large site, so the root Application.cfc file lives in the /oe directory.  Understand that are in the/oe/includes directory and in the example above the file Application.cfc is in the directory/demo/oe /.

  I'm new to this kind of things of cfc, so any help is GREATLY appreciated.

  Thank you!

  Holli

  You're right, it's complicated.

  With a single pass through your explanation, my first theory is that the in the root of your Application.cfc OnRequestStart does not work.

  Since you have an OnRequestStart function in the Sub Application.cfc file, it replaces the OnRequestStart in the base file.  Both do not work.

  But when you run a file directly in the directory includes, this file does not use a sub Application.cfc file so it does work the Basic Application.cfc file and so this function OnRequestStart() is used.

  IF this theory is true, the solution would be to call the OnRequestStart() function parent, starting with the child OnRequestStart function.

  That would probably look like this.

• Application.CFC / cflogin questions

  I haven't used one before Application.cfc, but coming from a background of software development, I kissed the idea without reservation. However, I seem to have a problem and it is a lack of understanding of the functioning of the Application.cfc, or a lack of understanding of what happens when I do a cflogin. I posted this elsewhere and have not received aid, so I hope someone here can help you.
  
  I pretty much lifted logic cflogin directly a sample on the Adobe Web site, with only the insertion of a call from db, which makes it different. What happens is that if you start with a new session, you can link to the home page login screen, enter the login, then the next page (in which the form registers) is empty. Now, if I go back to the home page (go back one level in the directory), and then request the login page, I don't see anything more. Finally, if I change the address bar to point to my logout page, I get disconnected, it returns me to the home page, and I can now link to the login page. Thus, it appears that once I'm connected, a very bad thing that happens. There must be something that I'm really not understand CFLOGIN. What Miss me? Note that the index page is at a higher level in the tree of all the other pages that I am referencing in this post, including the Application.cfc, and they are all in the same directory. You can join my homepage at http://www.changent.com/rr/index.html. to connect, use the help / me (this won't last until I have an answer). To disconnect, click on http://www.changent.com/rr/app/logout.cfm. I have attached a copy of my Application.cfc and other models. Your help is really appreciated!

  In your Application.cfc file, the logic in the onRequestStart() method is correct. This correctly handles cflogin.

  The problem for you is that you also implement onRequest()
  If you implement this method, you must include target directly the page to view.

  Or you can remove this method so that it does not exist and the page you requested will be treated.

  Description
  Runs when a query starts, after the onRequestStart event handler. If you implement this method, it must explicitly call the page requested to treat.

  Syntax of the function

  
  
  ...
  
  ...
  

• Record in a directory with application.cfc?

  Hello;
  Currently, I have improved a paper I did in a directory in my web site. I used application.cfm to lock the it and it worked well. I have improved my code works on application.cfc. and it seems to keep me out of the directory, but my log in code is not working now. Can someone help me? I have attached the code so you can see what is happening.
  
  Right now, my log in will not connect. I don't understand why.
  
  Can someone help me?
  Thank you.
  
  Phoenix

  OK, I did some reading and found a way to make the application.cfc main work of the file with the file in the subdirectory's application.cfc. I added a ProxyApplication.cfc with this code in it:

  
  

  and put this code in my application.cfc file in my sub directory:

  
  

  
  
  
  

  
  
  

  
  
  
  

  
  

  Now it crashes to the bottom of my repertoire, BUT he always kick me outside when I connect correctly. WHY? I don't understand why it isn't read this code correctly. No error, just won't let me open a session.

• Flex and application.cfc

  Hi all

  I'm under flex 3.5 and coldfusion 8.

  If I add my application.cfc in my flex my flex application file have an error to the appellant of CFCs.

  [Error CPP faultString = "coldfusion.runtime.AbortException" faultCode ="Server.Processing" faultDetail = "null"]
  to mx.rpc::AbstractInvoker / http://www.Adobe.com/2006/Flex/MX/internal:FaultHandler ([C:\autobuild\3.5.0\frameworks\p rojects\rpc\src\mx\rpc\AbstractInvoker.as:290])
  at mx.rpc::Responder/fault() [C:\autobuild\3.5.0\frameworks\projects\rpc\src\mx\rpc\Responder .as:58]
  at mx.rpc::AsyncRequest/fault() [C:\autobuild\3.5.0\frameworks\projects\rpc\src\mx\rpc\AsyncR equest.as:103]
  to NetConnectionMessageResponder / statusHandler ([C:\autobuild\3.5.0\frameworks\projects\rpc\ src\mx\messaging\channels\NetConnectionChannel.as:581])
  at mx.messaging::MessageResponder/status() [C:\autobuild\3.5.0\frameworks\projects\rpc\src\mx \messaging\MessageResponder.as:222]

  What do I have to configure in my application.cfc to make this work?

  Thank you

  Johnny

  This question. I insert a file blank application.cfc in my folder of CFC and all works.

  Rgds

  Johnny

• Using cfinclude and target Application.cfc

  Hello
  
  I use cfinclude to call another coldfusion file, but the the file called Application.cfc is not treated.
  
  To get an idea here is an example dir structure and code:
  ./directory_a/a.cfm
  ./directory_b/b.cfm
  . / directory_b/application. CFC
  
  ---./directory_a/a.cfm---
  < p > DEBUG: < /p >
  "< cfinclude template ="... / directory_b/b.cfm ">"
  -----------------------------------------------------
  ---./directory_b/b.cfm---
  < p > DEBUG: b < /p >
  -----------------------------------------------------
  ---./directory_b/application.CFC---
  < p > DEBUG: Application < /p >
  -----------------------------------------------------
  
  The result is:
  DEBUG: a
  DEBUG: b
  
  I am looking for is:
  DEBUG: a
  DEBUG: application
  DEBUG: b
  
  Any ideas?
  
  Thank you
  
  Nigel
  

  Application.CFC is executed at the beginning of each request,
  session, request or termination of each.

  It is not raised simply by a file to include.

  --
  Adam

• application.cfm and CFC

  for some reason any my cfc is not all variables appearing application.cfm. In addition it does not see them when I use application.cfc. I am running 6.1MX on iis5. Any info would be helpful.
  
  Thank you

  The dsn variable is not visible to the code in your CFC.

  The CF8 documentation, this also applies to the version 6 (someone please correct me if I'm wrong).
  «The CFC Variables scope includes all the variables scope of Variables that are declared or available in the page that instantiates or call the CFC.»
  http://livedocs.Adobe.com/ColdFusion/8/htmldocs/help.HTML?content=buildingComponents_29.ht ml

  I would put the dsn variable within the scope of the request or application. This will make the variable available within your CFC.

• We write plain HTML5, JavaScript and CSS in the development of webworks BB 10.

  Hi all

  We write plain HTML5, JavaScript and CSS in the development of webworks BB 10.

  Thank you all

  Yes.

  Here is an example of an application named BrickBreaker which was written entirely in HTML5, JavaScript and CSS.  It can be pacakged in BlackBerry 10 application using SDK WebWorks:

  https://github.com/BlackBerry/BB10-WebWorks-community-samples/tree/master/BrickBreaker

• Notification of validation of GTIN display required for the status of the specification and CSS publication

  Hello

  I develop a requirement through c# .net, display of the notification which are double GTIN number, the status of number, spec Spec and publication status of CSS.

  I'm already view the double number GTIN, Spec name and specification number. But I don't get notification for Spec and CSS published State.

  I tried c# .net with SQL queries, but does not work in the PLM application

  Please, give me suggestion. What could be a problem, see below mentioned queries SQL.

  private string sql = @ "SELECT specname.name, s.SpecNumber, t3.status, t5.caption gsmBaseTradeSpec t1.

  INNER JOIN t2 ON t1.pkid = t2.fkSpecID gsmProductIdentification

  s inner join SpecSummary on t1.pkid = s.SpecID

  inner join SpecSummaryName on specname.fkSpecsummary = s.PKID and specname.langid = '0' specname

  INNER JOIN t3 ON s.SpecStatusID = t3.pkid commonWorkflowStatus

  csstradeitempublication t4 on s.specid = t4.fktradeitem inner join

  cssworkflowstatuses t5 on t4.fkworkflowstatus = t5.pkid inner join

  where t1.pkid <>'{0}' and t2. GtinUpcNumber = '{1} "";

  Thank you

  Floquet

  Please check your sql, you can run on your database to check if all returned records.

  You can try to use LEFT JOIN for some tables instead.

  SELECT COALESCE(specname.name, ' '), s.SpecNumber, COALESCE(t3.status, ' '), COALESCE(t5.caption, ' ')  FROM gsmBaseTradeSpec t1
  INNER JOIN gsmProductIdentification t2 ON t1.pkid = t2.fkSpecID
  inner join SpecSummary s on t1.pkid = s.SpecID
  left join SpecSummaryName specname on specname.fkSpecsummary = s.PKID and specname.langid = '0'
  LEFT JOIN commonWorkflowStatus t3 ON s.SpecStatusID = t3.pkid and t3.langID = 0
  left join csstradeitempublication t4 on s.specid = t4.fktradeitem
  left join cssworkflowstatuses t5 on t4.fkworkflowstatus = t5.pkid and t5.langID = 0
  where ...
  

• plugin JavaScript and css file does not load in Apex 5.0 in certain circumstances

  Hello

  I have a strange problem. I've migrated a 4.2 application and its plugins to version 5.0.

  On my test server that everything works perfectly, plugins properly load css and javascript libraries.

  On the server to the client, even if the configuration is identical (Oracle 11 g, ADR 3.0, Glassfish), any plugin loading fails and triggers an error like:

  http://W2k3-Theos-t-AP/ords/i3std/r/2105/files/plugin/32865463423023705/v1/Select2.CSS

  Method: GET

  Status: 404 not found

  Currently the Plugin files (javascript and css) are stored in Oracle. Does it mean that I have muss stores as static files?

  Thanks for help

  Frédéric

  Kiran,

  Unlock APEX_LISTENER and APEX_REST_PUBLIC_USER and everything works perfectly.

  Thanks to Peter and Kiran, Apex is an excellent product thanks to its fantastic team

  Best regards

  Frédéric