Application loader: error ITMS-9000. Invalid package

Similar Questions

• Download the App: ERROR ITMS-9000

  Hello World-

  I try to download an app DPS to iTunes; It was built in Adobe App Builder. When loading, I get the following error:

  ERROR-ITMS-9000: "Code invalid signature rights. The signature for your app package contains values of right which are not supported. For the ' com.apple.developer.ubiquity - container-right of identifiers, the values in the array must begin with the prefix provided by Apple in the provisioning profile, followed by the uppercase characters or lowercase Roman letters [A - Z, a - z, the numbers 0 to 9, dot ['.] '], or hyphen ['-'] and does not contain wildcard characters. Specifically, the '7R584CUE64.*' value for the key "com.apple.developer.ubiquity - container-identifiers in"viewer.app/viewer"not are not supported."

  I actually get a variant of the same mistake, as well - just on swap chain of law for "com.apple.developer.ubiquity - kvstore-identifier".

  I can't find an asterisk on this value, it does reference anywhere. Can you all help?

  Thank you.

  If anyone has this same issue, try this fix. Everything worked for me:

  Ted http://StackOverflow.com/questions/7656318/Contains-Entitlement-values-that-are-not-suppor

• Error ITMS-9000

  Hey guys,.

  just tried to update an existing application (not DPS) - with a new version of DPS.

  When I try to download the package I get following message:

  • Apple web service operation was not successful
  • Impossible to authenticate the package: 735986870.itmsp
  • ITMS-9000 ERROR: "this set is not valid. The value of [3.4.5.8.92847] CFBundleVersion key in the file Info.plist must contain a later version than the version previously downloaded [14.9]. "to SoftwareAssets/SoftwareAsset (MZItmspSoftwareAssetPackage).
  • ITMS-9000 ERROR: "this set is not valid. The value of key CFBundleShortVersionString [1.0.7] in the Info.plist file must contain a later version than the version previously downloaded [14.9]. "to SoftwareAssets/SoftwareAsset (MZItmspSoftwareAssetPackage).

  As you can see, the previous version was 14.9 and the new DPS version should be 14.9.1.

  I often read the answer, I can't ignore the messages of ERROR-ITMS-9000, but I can't download the package... so I can't ignore it.

  Can someone help me?

  Thank you very much

  Chris

  Edit

  Application Loader v2.9

  DPS APP Builder v2.9.0

  Mac OS X 10.9.2

  Contact technical support. Adobe somebody needs to manually change the number of your version in such cases.

• Application load error 5: 0000065434 on Hunted: The Demon Forge

  I buy a game HUNT the DEMONS FORGE and I install the game when end installation and was the star of the game it say (Application load error 5: 0000065434

  WHAT SHOULD DO?

  Have what media you used to install the game? It was the original CD or did you download the game?
  It is a legitimate copy of the game?

  I would like to uninstall the game from Add/Remove programs. Then install again by using the original media/CD and see if you get the same error message.

  Thank you

• Application Loader error: invalid bundle

  I am trying to download a new binary version with the Application Loader. Application loader gives me the following for days now error message:

  'bundle-invalid-key-cfbundleversion-infoplist-must-contain-higher-version-previously-uploa ded-version '.

  I tried to create a new binary and repeat the process, but I get this message. It seems that this is not an unusual problem, but I have not found a way to solve it. Can anyone help?

  Thank you

  Ninetta

  I guess that you're updating an application. This error typically when you use the App to update an application created with a different set of tools. If you contact support, someone must be able to update your identification number of all. Gold support are listed on the dashboard.

• Mob ad works is not in the Application Loader error

  Hello Adobe AIR community.

  I had this problem for awhile now. Basically, I have been using AIR for iOS 15.0, Flash CC (2014) and milkman games Ad Mob DONKEY v.4.4.0.

  I can test my apps perfectly on iPhone and iPad devices. The Mob Ad banner and full-screen ads work very well in testing in a development environment.

  When I try to download my app on the App Store using the v3.0 Application Loader I get an error indicating "ITMS-9000 error: invalid Bundle." The bundle my_app.app does not support the minimum what OS Version specified in the Info.plist file"

  Now, funny thing is when I remove the DONKEY the application downloads on the App Store very well.

  I was forced to stop using ads in my AIR for iOS apps since the release of the iOS 8.

  I have also contacted Milkman games support but they tell me that I'm the only one with the problem, and this technical support is unable to reproduce the problem.

  Also I am on OSX 10.10.1 and I think that xCode has been upgraded to version 6.1.1 (don't know if upgrading xCode makes a difference, but I updated tonight and I tried not to re - download the app since)

  Anyone know what I can do? Any help would be much appreciated.

  Thank you very much!

  Hello world

  Change the minimum OS to 6.0 doesn't work but when I tried 6.1 that he submitted to the app store very well apple.

  Thanks Colin!

• Application load error ' binary is not valid ' "FAILED..." »

  Hello, I've just updated our application at V32.4.4. Everything seems to be good until I have try to download via the Application Loader to iTunes Connect. It happens to «Active Veryifying»... "then sits for about 15 minutes, then I get the following:

  Status of the session has FAILED, and the description of the error is "cannot open ssh session. (16)"

  An exception has occurred: unable to connect to sgr203.apple.com:44001: unable to connect

  An exception has occurred: unable to connect to any remote system: unable to connect to sgr203.apple.com:44001:Failed to connect

  An exception has occurred: unable to connect to sgr203.apple.com:44001: unable to connect

  An exception has occurred: unable to connect to any remote system: unable to connect to sgr203.apple.com:44001:Failed to connect

  An exception has occurred: unable to connect to sgr203.apple.com:44001: unable to connect

  An exception has occurred: unable to connect to any remote system: unable to connect to sgr203.apple.com:44001:Failed to connect

  90125-ITMS-ERROR: "the binary file is not valid. The news of encryption in load control LC_ENCRYPTION_INFO is missing or invalid, or the binary file is already encrypted. This binary does not seem to have been built with the linker from Apple. »

  Does anyone have an idea as to what is happening? Any help would be appreciated.

  Terry

  Thank you for your response. It turned out that the XCode should be updated to 6.2. I was able to download it, but now he sits just 'treatment '. It has been a few hours, so I don't know if there is now a discrepancy with the version number since it has no a couple of times before. I'll give it until tomorrow and see if it shows not as "+" under Builds.

  Terry

• Application Loader error

  Error message: 'unable to authenticate the package' in the Application Loader.

  Looks like you create a simple editing application. You can't put those of booth newspapers.

  You will need to modify your App ID in iTunes Connect to turn off the newsstand, and then you will need create new mobileprovision files during the CA. (the mobileprovision files include the AppID information, including the setting of the newsstand.) Then rebuild and resubmit the application.

• Apple Application Loader error

  Hello, I have a big problem trying to download on the App Store on my request.

  I have compiled and packed a new version of my app with AIR 3.0, previusly with AIR 2.7. When the Application Loader makes the package check it tells me the following error:

  iPhone / iPod Touch application is missing a required executable architecture. At least one of the architecture following (s) must be present: armv6

  I checked the Info.plist file and appears armv7, I said that also includes the armv6 and was included, but it is still present the same error.

  I tried to recompile with AIR 2.7 and download it, but gives the same error.

  This happened to someone? Any solution?.

  Thank you!!

  I have the solution and my fault. I explain:

  My APP need accelerometer and I set the use:

  UIRequiredDeviceCapabilities

  accelerometer

  Well! It is not correct for iOS Packager, I ned to declare:

  UIRequiredDeviceCapabilities

  accelerometer

  And now my APP it has downloaded.

• Application loader error - icon

  When I transfer my IPA file, I get an error from the ITMS-9032: "Invalid image Path: no image found at the location referenced under the key"CFBundleIconFiles":"icon.png;»

  It's the line causes the error is < icon src = "img/icon.png" / > the img folder is located in the www folder, and there is a file icon.png. "

  If I comment out the line, the error disappears.

  Any ideas?

  Thank you.

  Try, try again...

  First of all, I moved all the icons in the WWW directory. no joy.

  Then I zipped just the www; no joy.

  Finally, I changed the config file entries to include the gap: Platform = 'ios' with the width and height.

  It worked!

  Thanks for your help.

• ERROR iTMS-9000, it is always a failure intermittent apple

  I read a previous question on itms_ error, the correct answer to Neil was that Apple has intermittent outages on the application loader and try again later . My reason for the failure is different from the author of the previous question, in my case: "no architectures in the binary file. LiPo failed to detect architectures in the executable bundle"then maybe there is a solution? If you know, please tell me, thanks Steve

  Certainly an intermittent error with Apple. Try again in a day or two and if it does not resolve itself open a folder from supported with Apple Developer Support.

  Neil

• Application loader error messages

  I get several error messages when you try to put my app via the Application Loader. Here is a screenshot of my error messages. Can someone please? Thank you.

  

  The error told you what the problem is. You have activated the newsstand for your app in iTunes connect but no has not activate the option of newsstand in App Builder when you made your request. Disable the kiosk for the app in iTunes or activate it in App Builder. Then submit your application.

  Neil

• code invalid error itms-9000, signature viewer.app/viewer

  Salvo sto provando a mia generare prima app con dps (adobe CC), credo di aver seguito correctly curare procedure, recoupling nel momento in cui tento con app Loader di sottomettere ad Apple app useful, ricevo questo message come your comments.

  Wrong Cosa? Come if risolve?

  Grazie

  

  The error is correctly tell you what the problem is. You have signed the application with a certificate that does not match the mobileprovision file specified in the App Builder. Make sure that you switch your certificates and the mobileprovision file with another game that you have on your machine.

  Make 100% sure that have the correct certificate file and the mobileprovision is to travel again to the iTunes developers portal and put them in a folder on your machine for the application you are trying to build.

  Neil

• Presentation of App to the IAB (invalid binary error, ITMS-9000)

  Hello!

  Beginning today I have the binary "invalid" form ITC (18 hours after successful download).

  Now, I have tried to present the new binary and got even worse result.

  What should I do?

  Thank you

  

  Please see my answer in the other thread to memory App JIU stuck in the status "upload received".

  Neil

• Your binary is not optimized for the iPhone 5, Application Loader, ERROR

  I use flash builder 4.6, Air 18,0 on windows 7.

  I receive the error.

  Your binary is not optimized for the iPhone 5 - New iPhone apps and updates of application submitted must support 4 inches on the iPhone 5 and must include a launch image with the size-568 h modifier immediately following the < basename > the filename part of the launch image. The launch images must be PNG files and located at the top level of your package or provided in each .lproj folder if you locate your images of launch. Learn more about the iPhone support 5 and the app launch the images by reviewing the ' iOS Human Interface Guidelines' to 'https://developer.apple.com/library/ios/documentation/UserExperience/Conceptual/MobileHIG/ IconsImages/IconsImages.html#//apple_ref/doc/uid/TP40006556-CH14-SW5' and the 'iOS App Programming Guide' to 'https://developer.apple.com/library/ios/documentation/iPhone/Conceptual/iPhoneOSProgrammin gGuide/App-RelatedResources/App-RelatedResources.html#//apple_ref/doc/uid/TP40007072-CH6-W12 S'.

  
  

  I packed all type of style, one by a [email protected] Default.png, Default-568h@2x~iPhone.png etc, but eror won't.

  How to remove the error. I packed images and pictures on splashimage... one by one page by default.

  Now I am confuse to be it's mistake or apple Air or my error of flash builder.

  Please can you sat down.

  regarding.

  Naser.
  

  [email protected] is the size of the requested file, and it must have dimensions of 640 x 1136.

  Make sure that this file is included in your IPA in the top-level directory.  A good way to check is to rename "myapp.ipa" to "myapp.zip" and unzip and look in the top level of the folder structure.

  To get Flash Builder to include it in the IPA, place it in a folder that is included in your flash builder source tree (I use the "system" folder and make sure it is added separately to the project) and make sure that you have checked in the content area of the package:

  

  Additionally, make sure that you have "copy the files not included in the output folder", checked on this screen:

  

  Hope that helps!