Application module does not record the client interface

Similar Questions

• my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  HI - try the following steps:

  On your iPhone close application of activity and also, if it runs in the background, the health app (you can close open apps, including the app shows):

  -Double-click the Home button, and then drag upward on each of the app previews to close.

  It can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.

  If this does not resolve the problem, try next disconnect and rematching of your watch:

  -L'app shows on your iPhone shows backups automatically, including a new when the unpairing via the application.

  -Choose to restore the watch (backup restore) when provided the opportunity during the whole.

  -Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).

  - Pairing your Apple Watch and Support Apple - iPhone

  - Set up your Apple Watch - Apple Support

• Tecra M5 does not record the date and time - battery RTC or CMOS checksum is inconsistent

  My Tecra M5 PTM50E reverend new does not record the date and time. I loaded RTC battery for 8 hours when electricity is on in the said user's manual. I don't know where is the problem. The BIOS settings are respect after power is on.

  When I change any value in the BIOS, the changes are saved properly but date & time system restored to their value 01/01/2000, 00:00 every time when I get out of turning off more of 2-3 min. Message "RTC battery is low or CMOS checksum is inconsistent.

  Press [F1] to set Date/time"does not appear when I power on the computer. Any suggestions?

  Hi guys

  Usually this problem appears only if the CMOS (real time clock) battery is empty or corrupted.
  The real time clock battery powers the internal clock in real time and calendar. It also maintains the system configuration. If the RTC battery is completely discharged, the system loses these data and the real-time clock. In this case, the message RTC battery is low or CMOS checksum is inconsistent appears.

  So I see only two possibilities:
  Either you will charge the battery for real-time clock, or you ask the technician for replacement.

  Generally, the battery must be completely charged after 8-9 hoers but try to connect the laptop to the power adapter for a long time.
  If it will not help solve the problem if you contact the ASP for the RTC battery replacement.

• can I track a pop3 server on a system that does NOT have the client insta

  Can I track a pop3 server on a system that does NOT have the client.
  With the new serfvice on a system and specifying the name of the intellectual property of a remote control in the config file
  running pop3 system. In the config file, it asks a unsername and password. Is it necessary
  and if so what are the permissions the user must?

  > Can 3.0.3 hyperic Open Source apop monitor (which takes place
  > on 1110. I tried to use the pop3 plugin but got the
  > errors I listed to the original problem. We do not run pop3
  > but run they apop.
  > Is - can anyone help with that?

  The pop3 Checker will not work with apop.  Apop Protocol requires that we send a MD5 hash with the user name.  We can, adding this ability.  In the meantime, you can simply use the Socket TCP Checker to make sure that the port is up and listening.

  -Ryan

• Bridge does not record the adjustments in camera raw when I press on the fact

  Bridge does not record the adjustments in camera raw when I press on the fact

  It was because I installed a new program. Uninstalled and it works fine now!

• OpenScript does not record the session

  Hi gems... good afternoon...
  
  I am doing a test for our application of load basis. All related services oats are up. Version of OATS is 12.1.0.1
  
  In configuring Oracle Application Testing in database > Oracle load testing, the schema is 'base default BTA' in the same server of the main schema (of which the application is directed).
  
  The openscript I tried to record the actions to load tests, but it does not record anything.
  
  My navigations are:
  Start > all programs > Oracle application testing suite > File > New > Load Testing (Protocol Automation) > Web/HTTP > Default Repositiory > (given name) > finish
  
  Then I start recording, open browser window, I hit our connected URL and performed an offline action and stop recording.
  But nothing got recorded.
  
  
  However, openscript for the functional test script generation / regression registers the actions properly.
  
  
  Is this a bug or is it my mistake... Thanks in advance.

  Hello

  Try to provide complete domain name ie. MachineName.domain:8080.

  And make sure that there is no redirection to localhost. As I said all that with localhost in the URL is NOT registered.

  Concerning

  Wayne.

• Whenever I have check the box to save my e-mail address when you sign in, it it does not record the next time I visit the Windows Live Hotmail.

  I checked the save my email address box, but it does not record

  original title: can not enter hotmail sign to save my e-mail address

  Hello

  As the issue is specifically related to Windows Live Hotmail, I suggest that you post the question on the link provided below for assistance.

  Hotmail Portal

  http://windowslivehelp.com/product.aspx?ProductID=1

• 500 the application author does not match the author token of debugging

  My name is Jean-François Geyelin. My application name is PewPew.

  When you try to run PewPew on a playbook, I get the error "500 the Application author does not match debug token author.":

  the command deploy blackberry - installApp-password abdelkader 192.168.1.37 - package device-Debug/PewPew.bar returns:

  Info: Send request: install
  Info: Action: install
  Info: File size: 3575023
  Info: installation...
  Info: Treatment 3575023 bytes
  actual_dname:
  actual_id:
  actual_version:
  result::failure 500 the Application author does not match debug author token.

  I did check the following:

  the blackberry-nativepackager - listManifest PewPew.bar command returns (among others):

  Package-author: Jean-Francois Geyelin

  Package-author-Id: gYAAgPqb4i9DBQ-DjR0zWsAWK8s

  blackberry nativepackager - listManifest library/Research\ In\ Motion control / debugtoken1.bar returns (among others):

  Package-author: Jean-Francois Geyelin
  Package-author-Id: gYAAgPqb4i9DBQ-DjR0zWsAWK8s

  What should I check or what is the problem?

  
  

  Problem solved by clearing and forwarding of the token of the device debugging.

• Windows Media Center does not record the calendar.

  Planning to record a program, but sometimes lapsed time up to the point where it does not record. I am running Windows 7 Home. Yes, I checked preferences but which differs only up to 15 minutes max.  I have reinstalled twice already. Why please?

  Hello

  (1) did you make any changes before the show?

  (2) what is the brand and model of the computer?

  Windows Media Center records the first home run HD programs or any which TV tuner installed. However, you may need to follow a few rules.

  -If you turn off your computer, Windows Media Center does not have a regular program. The computer must be turned on or "standby mode" to record a television show. The computer will not automatically in standby mode if Windows Media Center is open.

  
  -Make sure that you turn off the screen and lower or turn off the sound if you have one at the request of a record in the middle of the night and don't want to be disturbed.

  -Your scheduled recording may not save in the following situation: schedule you a recording in Windows Media Center to start in less than ten minutes, close Windows Media Center and put your computer into standby or hibernation mode immediately. Use or one of the following options to save your record programmed:

  a. do not close Windows Media Center before you put your computer on standby or hibernation.
  b. after having programmed a recording, wait a minute before you put the computer in standby or hibernation.

  I would have you refer to the article below:

  Why my TV did not show record in Windows Media Center?

  http://Windows.Microsoft.com/en-in/Windows7/why-didn

  Please let us know if that helps.

• RoboForm 7.9.1.1 office does not record the password in 24 FF

  RoboForm works on FF 24, but it does not save the password on some sites like Twitter.com

  I tried [SHIFT-ENTER] or [ALT] & Login after you type the user name and password, but no luck.

  Anyone has the same bug or me?

  Thank you

  The problem is solved after update to Roboform 7.9.2

• OpenScripts not loadable in BTA, OFT does not record the activity forms

  I think of something borked here. I've got BTA 9.00.1355 running and it fits very well with the tests created by OFT - I can see them in the list of tests, game hide. Problem is, the scripts of the OFT do not seem to save whatever it is in the form of Java (and there is a bug in crash villain with LOV entries in self-service applications).
  
  So today, I downloaded OpenScript (Version: 9.0.0.0 Service Release 1) Oracle and of course, it works very well and reread my activity of forms for me. But the scripts do not appear in the OFT or BTA and I need to load test based on the activity of the forms.
  
  What gives?

  Hi Mike

  Let me try and clarify this point, first OFT does not support forms and is replaced by OpenScript, OFT is still supported, but is considered the development and it will be deprecated in the near future, if you need to use the forms, you must use OpenScript. OpenScript is divided into modules for the functional test and test, functional works on a level of interface user and charge at a protocol level making the load scripts very scalable scripts registered through the functional test module will not show under OLT because they can not be used for load tests if you need to load load test the forms to record scripts using the module which can be selected load test script using the wizard again.

  Hope this helps

  Alex

• Apple Watch does not record the duration of the exercise in the fitness rings.  Is there a solution?

  LLA exercise fitness ring does not workout time.  Is there a solution?

  Hello

  Progress towards your daily goal of exercise of credit, the application of the activity is to identify the activity equal or exceed the intensity of a brisk walk.

  This applies both in general everyday wear and during the recording of training through the app to training sessions. It is possible that your training did not meet this requirement.

  The definition of a brisk walk varies from one person to another and depends on your personal information. To verify that your personal information is accurate - and update over time:

  -On your iPhone, in the application of Eve, go to: My Watch tab > health > edit - tap and adjust the settings, then press on in fact.

  In general everyday wear and when your iPhone is not taken along on some workouts outdoors, the application of the activity relies on your movement of arm (measured by accelerometer) to track the movement in order to progress towards the goal of the exercise of accounting. For best results, let the arm on which you wear your watch to swing naturally when you move and during training.

  Calibrate your watch can improve the precision of the estimates (including the appropriations for the year) made by the activity and workout app app. More information and instructions for calibration of your watch are available via the link below.

  More information:

  Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

  Use the activity on your Apple Watch - Apple Support

  Use of the workout on your Apple Watch - Apple Support

• LifeLog does not record the amount off sleep I saw by night

  I want to track my sleep patterns, but my smart band or the journal of life is the recording of sleep at all! It was in the beginning, if anyone can help!

  Hi Jay76, welcome to the community!

  Try these steps and check after each method, if it worked:

  • Log in to the app new Lifelog
  • Make sure you wear the SmartBand on your dominant wrist
  • Make sure that you have an active internet connection to ensure the successful synchronization of data between the application SmartBand and Lifelog
  • Make sure you have not used the SmartBand in salt water or leave the USB microphone comes into contact with salt water
  • Go to settings > Apps > all > Lifelog > press clear data (this may remove recorded activities)

  Let us know whether or not these measures have helped. I hope they have!

• Inflation does not update the user interface information; always playing 'thin '.

  Don't know what else to do. Here you can see a thin provisioned disk:

  

  Which is confirmed by the client as well

  

  Now I inflate the vmdk (makes no difference, PowerCLI or browser data store)

  

  Once completed, the disc should show 'Thick' - or "Willing to scratch thick" when you use the client.

  

  However, it still shows thin, PowerCLI and vSphere Client. When you try to inflate again, he confirmed that the disc is not thinner

  

  The only solution seems to be to unregister the virtual machine or at least just the VMDK and re - register. This will update the information.

  Only reference I've found so far is 1037619 KB, but it simply indicates that this error means that the disc is not thin-provisioned.

  Another reference, I found online is:

  http://virtual-stones.stonemountains.nl/2013/04/sphere-client-shows-wrong-disk.html

  However, this indicates that the information changes once the virtual machine is running. What I can not confirm, it always shows 'End' until I have de-register / register VM or disc.

  Is there information somewhere on how to update the information of the UI once the disc is being inflated?

  The same effect that restore a virtual machine can be achieved with a reloading-VM as this operation:

  On the shell via SSH or DCUI ESXi:

  Get the id of the virtual computer with:

  # vim - cmd vmsvc/getallvms | grep-i [VM - name]

  Perform a reload:

  # vim - cmd vmsvc/reload [VM - ID]

  Through the PowerCLI:

  (Get - VM [VM name] |) Get - View). Reload()

  Check if this updates information properly.

  So again, it does not check if a restart of the host management agents work.

• Application manager does not download the newest 6. may updates!

  Adobe has announced new releases of Photoshop, etc. 6. may, but my application manager still tells every app is up-to-date and does not refresh all?

  For members of creative cloud the most recent update of product that only contains members is covered here http://blogs.adobe.com/creativecloud/photoshop-version-13-1-available-now-for-creative-clo ud-members /.

  If you mean what was announced at the Adobe MAX Conference may 6, it will be available on June 17. Details here http://blogs.adobe.com/creativecloud/huge-announcements-at-max/ and here http://blogs.adobe.com/photoshopdotcom/2013/05/breaking-from-tradition-photoshop-cc.html.