Application of color change to multiple layers at once, all chosen by some tag they would share

Similar Questions

• Change the multiple layers at the same time

  Hi all
  Is it possible to change the position of the multiple layers at the same time? that is to say: I've got a slideshow made with several layers (probably about 60) while back and now I need to re use it in a different size (smaller). When I just resize the document, my slide is no longer in the center of it and is bigger. I would like to: 1. change its position within the document. 2 reduce entire layer together. If 2 is not possible, fine, but to me, there may be a way to change its position. Thank you much for the help!

  If you look at the area where Flash displays your frames per second is a small button (it looks like 2 boxes blu - ish overlapping). It is the button "edit multiple layers. Once you press this, you will see a marker on your time line asking you to select the images to change. Stretch this segment to cover all the images you want to include in your editing - lock all layers you want to include in your installation. Then, you can press Ctrl + a to 'select all' - this will only select executives in "onion" and unlocked frames - from there, any changes will not affect what is selected. You have to play with how it works because it can be a little difficult to understand (when it comes to points of alignment and balance, etc.). I would like to make a copy of your flash document to test this point until understand you before you start your original edition.

• straighten multiple layers at once with the ruler tool

  Is it possible to use the ruler tool and straighten multiple layers that require the same correction in both?

  One or both them and make all at once.

  

• Apply changes to multiple pictures at once

  I'm not sure when this happened, but I just got back from vacation and I tried to apply a preset to a group of photos. It applied only to the first picture. I know that I was able to do this in the past so I was wondering if it has changed in an update or in the preferences. I had version 2.6 and it did not work and I've just updated to version 2.7 and it still does not. Does anyone have any insite? I don't want you must manually add the same settings to 800 photos! Thanks in advance.

  Suggestion of Beat it's even better!  (This is because he knows even better LR that I do).

  It's the help doc (search help for 'sync'):

  Synchronize settings with multiple photos

  If you work in the development or the library module, you can use the Synchronize command to apply some development parameters of the current photo to other photos selected in the Filmstrip. (The current photo is indicated by a white border more light in the miniature of the film).

  Note: When only one photo is selected in the film, the sync settings command is not available. In the develop module, the sync button becomes the back button; in the library module, the sync settings button is inactive.

  Shift-click to select the other pictures on the Filmstrip to synchronize with the current photo and then do one of the following:

  • In the develop module, click the sync button, or choose settings > sync settings. Select the settings to copy, and then click on synchronize.
  • In the module development, Ctrl + click (Windows) or Cmde (Mac OS) the sync button to change it to the Auto Sync button. Then, drag the sliders or make adjustments to the current photo, and the same adjustments are automatically made to the other selected photos. Click the Auto Sync button to exit Auto Sync.
  • In the library module, click the sync settings button, or choose Photo > develop settings > sync settings. Select the settings to copy, and then click on synchronize.
    All the settings that you may have previously selected or deselected in the copy settings dialog box are also defined by default in the dialog box sync settings.

  If you don't want to apply the changes to all images, then select only some of them.  If you want to only check the settings you want to update in the Synchronization dialog box only apply some settings to multiple images.

  John

• creating multiple procedures at once

  When I try to create multiple procedures at once
  
  All procedures are stored in the first procedure
  
  
  When I run the following script:
  
  
  ------------------------------------------------------------------------------------
  create or replace
  PROCEDURE CREATE_ITEM
  (Type % items.item_id ITEM_id,
  ITEM_DESC items.item_description % TYPE,
  ITEM_COST items.item_cost % TYPE,
  ITEM_QUAN items.item_quantity % TYPE)
  AS
  
  BEGIN
  
  If (ITEM_QUAN > = 0)
  THEN
  
  insert into point values
  (upper (item_id) |) LPAD(seq_item_id.nextval, 4, '0'), upper (ITEM_DESC), ITEM_COST, ITEM_QUAN);
  
  DBMS_OUTPUT. PUT_LINE (ITEM_DESC |) 'has been saved');
  
  on the other
  DBMS_OUTPUT. Put_line ('quantity should be 0 or more!");
  end if;
  END CREATE_ITEM;
  
  
  -------------------------------------------------------------------------------------------------------
  
  CREATE OR REPLACE PROCEDURE CREATE_ORDER
  (customer_id customer.customer_id % TYPE)
  AS
  BEGIN
  insert into orders values
  (seq_order_id.nextval, 0, customer_id, sysdate, 1);
  END CREATE_ORDER;
  
  ------------------------------------------------------------------------------------------------------
  
  It creates the "CREATE_ITEM" procedure and store the entire script of...
  
  Is there a solution for this problem?
  
  
  concerning

  Hello

  Place a slash
  /
  between the two procedures on its own line.
  SQL * need it as well.

  Kind regards
  Dermot.
  SQL development team

• How to change the application background color dynamically

  Hi all
  
  In my project, I'm loading the user roles and rights-based mxml components. For each mxml component, I used different colors and displaying the component in the Center screen.
  
  as
  If the User Password [background color = blue] I'm component loading, managing partner
  If the seller [backgound color = green] = user I'm loading component related vendor and etc..,.
  
  My main.mxml application is background is different [default]
  When I insert the component it must reflect the color [change the background color] in main.mxml application. How can I achieve this

  I found the solution. ;)

  [code]
  private void LoadComponent(licensetype:String):void
  {
  var screen: UIComponent;
  switch (licensetype)
  {
  case 'Manager': / / Load Manager Component
  screen = new Manager();
  addChild (screen);
  this.setStyle('backgroundColor','#9E9A41');
  break;
  case 'Seller': / / load SellerComponent
  screen = new Seller();
  addChild (screen);
  this.setStyle('backgroundColor',"#408080");
  break;
  by default:
  default display screen with information
  break;
  }
  }
  [/ code]
  :)

• Color changes during the recording of the PSD to JPEG

  Hi all

  When I export the image below of psd to jpeg color changes.

  The rose becomes Purple!

  

  Any help would be appreciated

  Just to be absolutely clear on this point - the problem here is that the file is in ProPhoto RGB.

  Windows 'Photos' isn't the color management and cannot represent a ProPhoto file correctly. No more than any other application without color management.

  Convert sRGB. It is the right answer to your question (which is the error of the very common beginner, BTW).

  In Photoshop, go to Edition > convert to profile > sRGB IEC61966 - 2.1.

  If you're Using "export as" or "Save for Web", just check the box convert to sRGB.

• Except for the color change of the Web of gifs

  I'm trying to 'save for web' a gif, and I get a change of color each time. I changed my color settings so that it is set to RGB monitor and it is extracted under test format as well. On the Save for Web window, making sure that "Convert to sRGB" is checked as well.

  Despite all this, the color change always happens. Here is a screenshot of my color settings:

  

  Is there something I can do to fix this? Thank you in advance!

  Saving as a gif you are inevitably reduce your color up to 256 colors gamet and so according to your original image you can result in a change of color simply by there. You must however not use your display profile in your color settings. If you want to put something on the web or in an application that is not color has managed the best choice is sRGB. Try these settings.

  

• Colors changing when you export files HAVE in InDesign

  Hello

  Since the upgrade of CS6 CC last year, I think my profiles color or something are put in place bad between CS programs. When I'm working on a file in Illustrator (RGB) and then place it in indesign, as soon as I export the PDF the colors change. For example, a series of gray tones will be released as blue and bright orange. I'm not clued up with the settings of all programs and the inner workings, but I've never had this problem before, I've never had to change all the color settings, so think, need a new default setting I don't know.

  I understand there are a many settings that could do that. I export the PDF RGB file too, but I can't see a likely switch to CMYK. Is anyway to reset all the settings back by default so that I can at least try and get the settings I usually use with CS6.

  Don't know what to do... any advice would be much appreciated! Thanks in advance

  Your Illustrator color settings is a problem. Choose 2 North America prepress of the parameters, which will assign sRGB to new documents and allow you to assign a profile to the existing docs. You can also consider to synchronize all your Adobe applications through the bridge Edit > color settings.

  As test try to synchronize your color for North American prepress settings, create a new document, place the file I and export with the output parameters in my first post.

• color change

  Now and then my color space seems to change on its own, and I can't figure out how to recover from the previous color space.

  The last time that happened, I was 'save for web' and that he was trying different settings of sRGB checked and unchecked. This might have caused the problem, but I do not know why because it is not the color of the recorded image which is at issue. It is the color space of the PSD file that has changed somewhat. The change is that the colours are duller and seem more washed out.

  I know that this has happened when I was not "save for the web." It seemed to me that I was trying to copy or paste or by using a different combination of keys when all of a sudden all the colors changed and I could not get back them. Cancel or cancel using the history does nothing to recover the original colors.

  It drives me crazy. I just spent an amazing amount of time - week (Yes, weeks) in fact - perfecting of colors for a site color scheme complex and out of nowhere my colors are completely foires. So I understand what happened and get back my original colors.

  I read in the forum about the possibility of having changed color settings; so I saved the file under a new name and tried other color settings, but that has not changed a thing. And if I look at the other files based on the file that has messed up (but which have original colors), color in both files settings alike. I also watched test and test colors and saw that the settings are the same as in the other case where the colors are not screwed up.

  Any help will be greatly appreciated.

  Thanks for the tips. But I has not changed anything in the color settings except in the window of the Web. That's when I left the save for web I noticed that all my colors had changed. But then again, this happened with other files and seemed to have occurred after use of key combinations such as cut and paste. I must have clicked the wrong key. But even when I closed the file without saving changes and then reopened, he still had the washed out colors. So SOMETHING changed, I just can't understand what this thing.

  ************************

  FOUND ANSWER

  It's embarrassing, but in this case, I found out something that I had moved into my open file was applied curves that touched all colors because it was near the top of the layers. I guess I didn't notice because I was zoomed in on an element. After I saved for the Web and closed the window, I noticed the color changes. In this case, it was an easy solution. But what happened before and I know it wasn't because of the curves or similar settings. Something happened which washed out/desaturated colours. I'll figure that one another day.

  But thanks to all who responded. At least I learned a few things

• drag multiple layers from one document to another

  When I drag multiple layers from one document to another, now the keys ctrl-shift-alt (that is placed exactly in the same place) Photoshop changes the selected layers. He eithers add a leyer or just pass.

  He wants me to drag a segment of the leyer where there is 'information' or pixels.

  I drag in the document itself, not the layerpanel.

  In previous versions, it wasn't like that.

  Sometimes there is a very little information or pixels in a layer. This is way hard to aim straight for photoshop to do what I want it to do.

  I don't know if it's done on purpose or it is a very annoying bug.

  Photoshop 20151114.r.301x64

  win10 64-bit x 64-proc

  Intel i7 - 4770 s 3.1 GHz

  24 GB RAM

  SSD

  Well, it is quit interesting: while we are working on this problem, I advised a new update for photoshop: some problems occurred with the last update.

  I was working with 20151114.r.301

  And now I have the 20151209.r.327 version (which comes in fact in a few minutes ago)

  I tried the same thing as above and now my problem with the sliding of the layers went!

  So it was a bug. Nothing to do with the settings or anything.

• The objects will not retain any color defined when the surrounding objects have their color changed

  Just Illustrator CC 19.0.0 was downloaded to me. When I place a line and then set its color, close objects can also have their color changed. This includes the items in the file of until I added the line, not on the same map-art objects. It is not universal, nor is it compatible. Objects already in the file are perhaps there for months, but a change is close will change their.

  The Illustrator files can still be an earlier version, and there were a number of illustrations that had black lines and text to white turned a few months back. As these illustrations are for a book, being unable to guarantee that the colors will stay together long enough to complete the illustration and export it tends to make unusable Illustrator for tasks of editions. I hope that InDesign and Photoshop do not have the same questions!

  nwjh,

  You must update to 19.1 (or 19.1.1 for Windows) or 19.2 (lattethe has some problems, then you can start with the former).

  If 19.1 (or 19.2) does not appear, disconnect and then reconnect the creative cloud application. After that, the 19.1 update must be visible in the creative application of Cloud.

• Issue with the brightness when the colors change

  I want to change the color of a building when I use the brush of color change the color looks really washed out dark red IE looking for rose. It will correct the right color if I have everything first to use the brush set of color on the brightness and then use the color value but let the texture of the building. It changes the image, the color is another way. Thank you

  You might look in a technique called frequency of separation. This would be separate your texture and color in two layers, so you can change the color without the texture. Here is an example:

  

• In Photoshop CS6 Hue Saturation does not work with forground/background jitter set to 100%, that no color change is found. Help

  In Photoshop CS6 Hue Saturation does not work with forground/background jitter set to 100%, that no color change is found. I've added a screen Shot the brush settings and a demonstration of what produced the brush.

  I also noticed that when I make a model of a single color, when I fill a selection with the pattern, I get a rainbow of different colors.

  I use a 64-bit version of Photoshop CS6 masters Collection

  I'm on a PC equipped with an Intel Core i7 1366 4 physical cores and 8 wires, 24 GB of DDR memory, A Crucial 512 GB SSD and a NVIDIA GTX 570 with 2 GB of memory.

  The size of the document is 2100 x 1500 pixels in only two layers of 300 PPI

  For the issuance of the brush, see apply a Tip in the dynamics of color and see if that makes a difference.

  more information

  Dynamic color in Photoshop CS6 "Julieanne Kost's Blog

  https://helpx.Adobe.com/Photoshop/using/adding-dynamic-elements-brushes.html

  With regard to the model, if your use Edit > model fill, make sure you have not verified Scripted Patterns

  (this parameter is also the Paint Bucket tool in photoshop cs6)

  more on scripted models

  https://tinytutorials.WordPress.com/2014/07/25/Photoshop-CS6-CC-scripted-patterns-fills/

  

• Can someone tell me how to show/hide multiple layers at the same time?

  Hello

  Can someone show me how to make more than one layer visible or invisible, without having to click on each separate layer? -J' have more than 100 layers in a drawing, and it is very tedious to have to click on each individual layer to hide it or show it. I just started using Photoshop elements 13, on an iMac

  Thanks for any advice.

  You can Option , click on the eye next to the thumbnail icon of the layer to hide all selected layers, but.

  Option , click New to display all layers.

  Order click to change the visibility of the selected layer switch

  To hide multiple layers, select the layers, right-click on one of the eyes, and click hide this layer

  Repeat to repeat the visible layers.

  You can also click on one of the eyes and then drag down or to hide layers and invert to make the visible layers.