application or the C:\windows\system32\odbcint.dll dll is not a valid windows image

Similar Questions

• How to fix the application or DLL C:\WINDOWS\system32\SensApi.dll is not a valid Windows image. Please check this against your installation diskette.

  I got the message "the application or DLL C:\WINDOWS\system32\SensApi.dll is not a valid Windows image. Please check this against your installation diskette. "When I click on Start, point to programs, point to Accessories, point to System Tools, and then click Activate Windows.

  Thank you!

  The question that I already fixed. As your mentioned before, I have download SensApi.dll and stuck to C:\WINDOWS\system32\.

  After that click on Start, run and type regsvr32 sensapi.dll and then press enter.

  Restart your computer, it works now from.

• I get a dll error message that says: "the application or DLL C:\WINDOWS\system32\kizinone.dll is not a valid Windows image. Please check this against your installation diskette.

  I get a dll error message that says: "the application or DLL C:\WINDOWS\system32\kizinone.dll is not a valid Windows image.  Please check this against your installation diskette.

  I went to the system registry to find the file it refers and is not a he.  I ran a norton registry cleanup and a virus scan.  I did find something online that made reference to this dll file.  The message appears at any time that I start a new program.  How to fix this, or find the virus that is the cause.

  A Google search for "[insert the name of the file]" grown up nothing. When you get no hits for a filename on Google, chances are high that it is a malicious program file. You did not when you get the message. If it's only at startup, either you have uninstalled the malware program or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup. If you get the message during regular time on the computer and not not only at startup, your computer is still infected.

  Norton will do the job of cleaning and registry cleaners are garbage who at best will not do anything and the worst risk damage to your Windows installation.

  First of all, make sure that the computer is really free of virus/malware through these systematically - General malware removal steps http://www.elephantboycomputers.com/page2.html#Removing_Malware . Then, if the computer is really clean and you still receive the message, manage your Startup to remove the reference to the malware:

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx
  MS - MVP - Elephant Boy computers - don't panic!

• "The Application or DLL C:\Windows\System32\dwmapi.dll is not a valid Windows Image" Windows Live Mail - Error Message

  When you use Windows Live Mail, whenever I try to open an e-mail that I receive the following error message: the Application or DLL C:\Windows\System32\dwmapi.dll is not a valid Windows Image.  What can I do about it?

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• Error "the application or DLL C;|WINDOWS\system32\NCObjAPI.DLL is not a valid Windows image. "Please check this against your installation diskette."

  Original title: lockout

  I get a black screen with the message from the application or DLL C;|WINDOWS\system32\NCObjAPI.DLL is not a valid Windows image. Please check this against your installation diskette.

  Hey Todd-Cindy-MorganBurris,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?
  4. You are able to boot into Windows after the error message?

  Method 1

  If you are unable to boot into Windows then check if the problem persists in safe mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 3

  If you can boot into safe mode and clean boot procedure don't help then I would suggest that scan you SFC on the computer that will search the corrupted system files and check if that helps.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• Performance issues in XP after removing the Trojan horse, now get "the application or DLL C:\Windows\system32\qnwzuc.dll is not a valid Windows image.

  I have a Toshiba laptop older, bought in a shop of second hand computer, running XP Home. I have no "Setup disk.

  I get this pop-up message: "the application or DLL C:\Windows\system32\qnwzuc.dll is not a valid Windows image. "Please check this against your installation diskette."

  I also get about 20 pop different messages, like this: Image Bad - Isass.exe, bad Image - OSA9.exe, bad Image - msimn.exe, mbamgui.exe, bad - services.exe and so on

  Just download and run StopZilla, which found Trojan called TDSS and removed him, but these messages are unchanged.

  The computer is much slower that used to be, sometimes turns off automatically.

  I have a Toshiba laptop older, bought in a shop of second hand computer, running XP Home. I have no "Setup disk.

  I get this pop-up message: "the application or DLL C:\Windows\system32\qnwzuc.dll is not a valid Windows image. "Please check this against your installation diskette."

  I also get about 20 pop different messages, like this: Image Bad - Isass.exe, bad Image - OSA9.exe, bad Image - msimn.exe, mbamgui.exe, bad - services.exe and so on

  Just download and run StopZilla, which found Trojan called TDSS and removed him, but these messages are unchanged.

  The computer is much slower that used to be, sometimes turns off automatically.

  If I bought a used computer, no matter who previously owned, the first thing I have with it would be to reinstall the operating system itself. You know not how the computer has been maintained, which has been incorrectly installed, what is missed, what virus and spyware, there may be, etc. I would not live with someone of another errors and problems, possibility of kiddy p0rn, etc, and I would not recommend anyone else to do.

  Your choice of course, but in my opinion, you're playing with fire if you reinstall Windows properly.

• EXE Error "the application or DLL C:\WINDOWS\system32\WINHTTP.dll is not a valid Windows image

  When I try to download & install programs, the following error message "[program] .exe" is displayed: "the application or DLL C:\WINDOWS\system32\WINHTTP.dll is not a valid Windows image.  Please check this against your installation diskette. "All the solutions out there?

  Hi pixietra,

  1. did you of recent changes on the computer?

  2. what browser you use to download programs on the computer?

  3. it happens with any download and installation of the program?

  4. do you have security software installed on the computer?

  I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• Error when you click icon: the application or DLL C:\Windows\System32\ccfgnt32.dll is not a valid Windows image.

  Not a Windows image is valid. Help!

  At the start of my PC, and whenever I click on any icon I get the error message:
  The application or DLL C:\Windows\System32\ccfgnt32.dll is not a valid Windows image. Please check the Setup disk.
  At the start there are several, each with a file name of a program in the blue bar, i.e. "firefy.exe - bad Image" followed by the above statement. After you click the only option, 'OK', the system works well, but the message will continue to re appear after clicking on any icon on the desktop or the start menu.

  I need help with the removal of this question. I have not installed or run new programme before the start of last week. Thank you.

  3/15 - installed, updated and ran Ccleaner and Malwarebytes. Restart the pc after a successful run of each. Same question:
  The application or DLL C:\Windows\System32\ccfgnt32.dll is not a valid Windows image. Please check the Setup disk.
  Help please. Thanks in advance.

  CRR
  E-mail address is removed from the privacy *.

  Hello RRC633,

  I suggest that see you if you have corrupted system files.

  Click Start
  At the command prompt, type: sfc/scannow

  This will check for any violation of the integrity and repair any damaged operating system files. It may take some time to run.

  Reboot your system.

  The KB Article ID: 310747 - Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  If that comes back without any problems of integrity, then I would check the event viewer for errors in the application or system event logs.

  The KB Article ID: 308427 - how to view and manage the event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

  Please answer back with an update.

  Marilyn

• How do you fix C:\Windows\system32\DNSAPI.dll is not a valid windows image. etc? __

  After a new installation or a repair of xp pro sp3, everything works fine, until I have download 57 updates. On reboot, the message, and then sytem hangs.

  The recent update of KB2509553 contained a new file dnsapi.dll (and other things) that patched a hole that "could allow remote code execution" on your system.

  If you have symptoms lists these:

  Lsass.exe - Unable to locate component
  This application has failed to start because DNSAPI.dll is not found.  Reinstalling the application may fix this problem.

  Lsass.exe - bad Image
  The application or DLL C:\WINDOWS\system32\DNSAPI.dll is not a valid Windows image.  Please check this against your installation diskette.

  .. .it sounds like the update or of parts of it has failed.

  If you copied into an older file, your system may then start OK, but part of the security update is missing.

  I don't know if that is considered to be a "fix" or not... but you can get free help/support for the update using the details in the KB page.

  Maybe here Microsoft support engineers know how to solve this problem too (I asked last week).

  Tip: There is nothing wrong with the update - the problem is a problem on the system that does not have the update installs successfully.

  Solve this problem and the update will install correctly and you'll have security installed was last updated.

• get a pop-up message "c:\windows\system32\ms32clod.dll is not a valid windows image.

  I get a pop up message "c:\windows\system32\ms32clod.dll is not a valid windows image" every time I start up windows XP.

  Can anyone suggest a solution please?
  Thank you
  Teabag123
  Hello
  • What were the changes made before the issue started?
  I suggest you return these methods:
  Method 1:
  I suggest you make a system full scan just to be sure.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
  Method 2:
  a. click Start, click run, type System32.
  b. enter OK
  c. find mcenspc.dll
  d. right-click on the file, then click on Remove.
  e. restart the computer.

• error windows\system32\advpack.dll is not a valid image

  I try to install Life Cam VX-5000. I get an error image DXSETup.exe - bad... It is said THAT DLL C:\WINDOWS\system32\advpack.dll is not a valid windows image. Please check against your installation diskette. I'm not a programmer or anything, just an ordinary girl looking for help. Can someone walk me through what to do to solve this problem in simple terms? Thank you!

  System Machanic 6 has detected that a file Advpack.dll was spyware on his deep optimization of Start Up procedure. However, Windows replaced after its deletion and I ran SM6 Pro again. This time he ignored the file.

  CONCLUSION: There are maybe a program that replaces the Advpack.dll real with a fake spyware Trojan. Perhaps in one of the free SP2 packs on the internet or another program. Here again, it may be a fault with Spyware detectors.

  As long as the file is replaced by Windows automatically, so there is no real problem, and we can thank God for the major spyware removal programs.

• I received the following on each exec. The application or DLL C:\Windows\System32\kugejasi.dll is not a valid Windows image. Please check this against your installation diskette. Appears also several times during the

  widow of closing with the error allows program to load.

  This could be the result of a virus infection or spyware.  Run the System File Checker, which allows to repair infected Windows files:

  1. click on Start > run .
  2. type sfc /scannnow in the area.
  3. click on OK .

  If this does not resolve, then, run a full scan with your antivirus program, download and run the Microsoft Windows Malicious Software Removal Tool and Malwarebytes' Anti-Malware .

• That means: 'WINDOWS. System32/xprt5.dll is not a valid windows image"means?

  This message appears intermittently, whenever I restart or sign to AOL.  Everything seems to work, but the message is boring.  I did a search for files with the same name and in WINDOWS/System32/xprt5.dll he got 0 KB of data.  It included data (about 260 kb) on the AOL files.

  See if this helps: http://pcsupport.about.com/od/findbyerrormessage/a/xprt5-dll-not-found-missing-error.htm

  It looks like also apply: http://www.fixcleaner.com/blog/index.php/errorsinaol/230-xprt5dll-error-fixing-problems-in-aol

• Help start the old computer system32/hal.dll error not installed bugs not working-

  I want to transfer files from your old computer to new computer with Vista Easy Transfer.  In an attempt to start former computer, received the system32\hal.dll error.  I followed the instructions to fix proglem reboot, press / hold down f8, etc., but that has not worked.  I could reinstall the operating system Microsoft Windows XP Professional, including Service Pack 1. But if I do then I lose all files, documents, photos, everything from the old computer... at least, I think it's going to happen.  Can you tell me what are my options to ensure that I don't lose any of my data.

  This behavior can occur if one or some of the following conditions are true:

  By default in the [Boot Loader] section of the Boot.ini file is missing or invalid.

  Windows XP is not installed in the location specified in the Boot.ini file.

  The Ntoskrnl.exe file is missing or damaged.

  The path of partition in the Boot.ini file is not set correctly.

  General failure.

  The article below should help you solve this problem.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

  You must have a Windows XP installation disk to perform the steps listed in the article above.

  Hope this helps

  Post back if necessary

  ___________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• C:\WINDOWS\system32\lmfckf.dll is not a valid Windows image

  I receive several messages like this will be connected and during programs then on my computer.  How can I solve this problem?

  I receive several messages like this will be connected and during programs then on my computer.  How can I solve this problem?

  Messages "like this" is not detailed enough.  You must provide accurate and complete error messages.

  That said, the sudden Google reports for lmfckf.dll is your own message.  This means that the file has almost certainly is malware.

  What antivirus application, including the version you have installed?  What's your current subscription?

  If you have not already done so, download, install, update and run following two WAYS:

  MalwareBytes Anti-malware: malwarebytes.org

  SUPERAntiSpyware: superantispyware.com

• DLL C:\\windows\system32\byyyvt.dll is not a valid windows image. Please verify that your Setup disk __against.

  Hello

  When I turn on the PC, I get this error at the beginning. After I click 'ok', I am able to continue working.

  Can someone tell me how to get rid of this error?

  Thank you.

  Hello

  Cannot find this file on Google so you probably dodged some software malware and you should do a
  very thorough control. Message on how to remove the error message if still it y
  After the audits of malware.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often
  easy to detect malicious software often comes with a much harder to detect and remove the
  payload. So its best to be now too thorough than paying the high price later. Check
  with an extreme overdose point and then run the cleaning only when you are very
  that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap you start, however, you should
  also run in regular Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
  Use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
  files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.