Application with the same icon

Similar Questions

• Applications with the same resources of project running in LabView

  Hello

  is there a way how to force LabView running screws (apps) that share resources (screw controls etc.) as independent.

  I have a project with TCP/IP networking, it is better being debugged localhost, and two applications share a reusable code that I use (report errors, typedefs), synchronization of threads

  If I run both as screw, she eventually of course dysfunction, because both applications share a memory, which is supposed to be the current process.

  Now I have to build these Apps with debugging turned on to solve this problem, it's a lot of your time, because every code change must be to rebuild

  You have both of your applications in the same project?

  If so, try to put in different projects.  LabVIEW will create spaces separate memory for them.

• Download touch and non-touch application with the same name

  HII I'm doing a new version of an application

  in the new version of the application, I have two separate release touch and non touch.

  so create us the same name of the app and app-world as a separate product with a different version

  and download sound on 22 Dec 2012 but until the pending status

  so exactly what I do if blackberry approvue my request

  When I send an email to app world support rereading as 'is there a reason? why you create the same application again  You can't have two applications in the portal of the same name. »

  Thanks again in advance for proofreading

  I would look to create the same application in charge touch and non touch at the same time.  You can do if your application supports OS 4.7 and later only.

  If you really need to do two different builds, then add the two builds in separate bundles to the same app on App World and use the selection of the device to make sure that your touchscreen package is only for touch devices to screen and vice versa.

• Now, all the applications on my Mac air show the same icon and doesn't open, please help!

  I did a quick cleaning on my Mac and now all my applications show the same icon and does not open! TIA :-)

  "quick clean up"...

  It seems that you may have removed some system files, you shouldn't have.

  If your Mac is running v10.7 Lion or later, you can restore OS X using OS X Recovery.

• Navigate between two applications in the same workspace without sing again

  Hi all

  Version 4.1.0.00.32 of apex. Oracle DB version 10.2.0.3.

  I have two applications built in the same workspace, if a user can log on to two applications with the same user name and password. I'm looking to put a link on one of the applications to direct the user to the other app. Is there a way to avoid name of user and password to re-enter once the user clicks on the link? I noticed that the session ID is application + user. Not by the workspace + user.

  Thank you
  Sinan

  Change the properties of authentication scheme in both applications and set the name of the Cookie to be the same.

  As long as the session ID is maintained in the links, you'll be fine.

  Each application will allow authentication in your applications, but only after the relevant authentication will trigger.

  Scott

• I've uninstalled and reinstalled the drive several times with the same result, my problem is when I download the drive icons for my browsers and above all my desktop icons change adobe logo, so when I click on them Adobe tries to open them.

  I've uninstalled and reinstalled the drive several times with the same result, my problem is when I download the drive icons for my browsers and changing most of my the desktop icons for the adobe logo, so when I click on them Adobe tries to open them, of course, he does not format because it's not an adobe application , so I tried to restore the computer to an earlier date and it wont let me as long as Adobe reader is installed, so I need to uninstall and now I have nothing to open files and downloads of Adobe, someone had this problem and if so, did you get it resolved? Thank you Tommy...

  This may help: Application, file icons change in Acrobat/Reader icon

• I have a desktop version independent of PS6 - if I download some desktop PS CC application will be this result in all conflicts with both applications on the same desktop computer?

  I have a desktop version independent of PS6 - if I download some desktop PS CC application will be this result in all conflicts with both applications on the same desktop computer?

  Hello

  Yes both licenses will be in conflict and it will activate CS6 with creative cloud.

  You can only use a license on a computer and you can also download the previous version of the creative cloud.

  Concerning

  Gilles marneffe

• Mac Air 1.3 Ghz i5, 4 GB ram end of 2013 everyone upgraded to El Capitan with the same configuration?

  worried about the going 10.10.5 Yosemite to El Capitan. Especially with only 4 GB of ram. Have 256 GB SSD HARD drive

  would appreciate an answer from people already have the upgrade.problems with the same configuration? slower?

  FWIW, the El Capitan applications are no different from Yosemite. In fact, it is easier on resources in some areas. The main thing you need to worry is to make sure the software and equipment to use is compatible. Make sure you have a good backup in case you change your mind and want to downgrade.

• Problem of airtime with the same SSID

  I often use AirPlay to my iPhone and iTunes on my PC to play for my (home theater installation) AVR - 1506 Marantz.

  Configuring wifi in our House are a router/modem to the ISP and an Asus RT-N56U (in access point mode) with DIFFERENT SSID to which I don't have problem to play AirPlay on any device. I had the same SSID when so I can use wifi roaming without having to change the SSID whenever the other signal weakens.

  When I put two (router & AP) with the same SSID, Airplay icon will not be displayed? But if I put a different SSID to one of the two, airplay icon is back. Channels are on ch.1 (router) and ch.11 (AP). Someone knows how to set up?

  UPDATE:

  Disable NAT in fact access point the AirPlay icon always appear but he cannot yet play through my APR.

  * all updates *.

  12.4.3 iTunes

  Windows 10 updated, firewall offshore

  Marantz 1506 firmware update

  always put iPhone to update to the latest version

  The routers are also updated to its latest firmwares

  What I believe you are describing is a network expanded through repetition, the Apple TV does not work well with repeaters. Try a different configuration.

• IMessage Apple Watch has two interviews separated with the same person?

  My new Apple Watch has a problem with iMessage and I know how to fix this on my iPhone but not watch?

  On my iPhone, that my ID apple is connected to more than 10 devices and sometimes when a new device is added, it adds the addresses on my apple for iMessage and FaceTime ID and I always fix by unchecking the addresses that I don't want in the application settings under "Messages" and "FaceTime." However, this isn't the same thing to watch because there is no option in the settings on the Apple Watch and the watch App on my iPhone.

  I would like to help please?

  Hello

  Apple Watch uses the same parameters (for how you can be reached and how new conversations are started) for Messages as your iPhone.

  If you have two interviews separated with the same person, the following steps may help:

  • On your iPhone, check if there is more than one contact form in Contacts of this person (if so, remove duplicates).
  • Delete old Messages conversations with this contact on each of your iPhone and watch:
    • iPhone: app Messages > swipe to the left on a message thread > delete.
    • View: Open the Messages app (from the home screen, which is accessible by pressing the digital Crown) > swipe to the left on a message thread > tap on Trash / delete.
  • On your iPhone in the app Watch: Watch My > general > reset > press reset sync data:
    • You won't see anything happen after pressing it (the process runs in the background, invisible to the user).
    • Leave a minute or two to allow the course ends.
  • Restart your iPhone and your watch (turn the two together off the coast, then restart your iPhone first):
    • Restart your iPhone, iPad or iPod touch - Apple Support

    • Restart your Apple Watch - Apple Support

• Two thunderbird profile both at the same time with the same user account

  Dear Sir
  I would like to use Thunderbird two at a time for two different profiles with the same user accounts.
  I use linux OS.
  I thought using the:

  1. Thunderbird Pei Profile1 &
  2. Thunderbird Pei Profil2 &

  But at the launch of the second order, that nothing is happening.
  Appears in the foreground thundirbird already started.

  If possible use this configuration now or in the future nex?

  General rule, thunderbird runs only a single instance of a profile.
  However, there are two options, you can try.
  You can use an addon esily switch profiles:

  • https://addons.Mozilla.org/en-us/Thunderbird/addon/ProfileSwitcher/

  There's more help here:

  • http://KB.mozillazine.org/Run_multiple_copies_of_Thunderbird_at_the_same_time

  He said: "several instances is expected for debugging, so use it at your own risk.

  One method would be to use: start > run
  "C:\Program Files\Mozilla Thunderbird\thunderbird.exe"-no-remote Pei profilename

  There is a space before '-no '
  and also before '-P'
  followed by a space and the name of the profile

  You can create a shortcut icon to run each separate profile.

• where to save the files under options the file name is duplicated how to remove an additional folder with the same name

  Under Options in Firefox, I clicked on save the files under downloads, but the file name twice and an additional file with the same name is created in the folder, i.e.:

  G:\Akbar's Songs\HAMARA DOWNLOADS\HAMARA FORUMS DOWNLOADS FORUMS

  As you can see the file repeats, how can I fix it?

  Also the music files, I download from a site of downloads as a WinRar file and I need to open it. Y at - it an option where the file opens automatically in the folder I chose?

  Thanks a lot for your help.

  Hi Akush, when you install 7 - zip, make itself the default application to open .zip and .rar files. So if you double click on the .rar file, it should open in 7 - zip. If you prefer to decompress immediately, right click the file and look for new 7 - zip items in the menu. I can't think of a way to do this automatically, however.

• Two applications at the same time on the M200?

  On the Amazon website (and I'm sure elsewhere), it says on the M200:
  "With the optional Tablet Multi Dock station, you can connect an external keyboard and monitor allowing you to run different applications on screens separated at the same time."
  I've been reading my M200 and the multidock and it doesn't say how to do this. It seems strange when it's supposed to be something special you can do with the M200, he's not telling how you do! Could someone enlighten me please?
  Thank you very much

  Hello

  In my view, this means that the option of extended desktop.
  If the external monitor is plugged so that you can use this option to enlarge the display option. This option, you can activate with the key FN + F5 combination. If this option is enabled for example, you can open two widows of IE and one from this window, you can switch to the external display. In this case, you can use two applications at the same time

  Good bye

• Can I have several structures with the same case of event event?

  Hello

  I do an application which reproduces the front of the power supply HP6675A. To do this, I did a machine to States with different States

  (initialize, measures, voltage, current, ocp, ov, store, recall, etc.). In each State, should have a structure of the event that attracts the events of the buttons, as for example: If the current state is the voltage mode and the current button is pressed the next State will be the current mode. For this purpose in each State of the state machine should be the same structure of event with the same events.

  My problem is that the Vi does not work properly when I have several structures with the same case of event event. There are some possibly to do and how? Or is impossible to have several events? I read a few posts, but I can't find solutions.

  Any help is appreciated.

  Thank you very much.

  In general, you should have 1 structure of the event in your VI.  In your state machine, the structure of the event should be in "pending" status  So you will probably start in the State of the initialization and then spend idling.  Then, the user presses the present button.  If your state machine should then, go to the current state and then return to Idle.

• How to display on my screen 2 different applications at the same time?

  How to display on my screen 2 different applications at the same time?

  Hello

  The best place to ask would be the forums for answers corresponding to your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  =====================

  If you have Windows 7 with Aero - click with the right button on the taskbar at the bottom of the screen and click on 'show windows '.
  Side by Side.

  For all versions of Windows:

  You could also reduce less than full screen using the small box to the left of the red X at the top right
  and then resizing windows as you want.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">