Similar Questions

• For days now, my iPad Air insisted on the fact that it cannot connect to iTunes. Wifi works fine for applications and devices, and I tried all the options on the support page. Nothing has worked. What should I do?

  The time zone is correct, it is signed through "iCloud" in the settings and all the apps work relatively well, including those who are in need of the internet, so the problem is not the internet. However, the Air iPad is more connect to iTunes, it is impossible to update anything. It won't let me reconnect through 'iTunes and App Store' in settings, just tell me that it can't connect to iTunes everytime I try it. I also noticed that Game Center is strange, his page in settings will not be same load and he often delay signing in when I open an application compatible with it. My iOS is updated to 9.3.1. The only thing I can think is that I had to change my password recently, but he had me to login with the new password on the device, and this problem did not show up a few days later. I am at a loss on what to do at this point, and I already tried all suggested fixes Apple support. Are there patches less known who could solve this problem? Or, is this a widespread problem that apple is having this time with their servers?

  Hi TimeSeerStudios

  I don't see the failure:

  https://www.Apple.com/support/SystemStatus/

  Have you tried to close all applications and restart force (hold down the sleep/wake and Home buttons and do not let go until the screen darkens and the Apple logo appears)?

• Windows 7 sounds decreases between Applications and devices (Dell Vostro 1015)

  I'm having a problem where all that sound comes from applications Stoops when he goes to the peripheral output. To illustrate the problem, here is a picture of what's going on.

  

  I turned on and turned off all the improvements, changed options of exclusivity and changed the format of sample rate.
  I know that's not a hardware problem, because sometimes the speaker will be a decent volume, but only temporarily, usually until when I update the volume in firefox or another application that I use for sound.
  The thing that triggers this turns on the improvement of Loudness equalization, change my 24-bit, 192000 Hz sampling rate and by checking the boxes 'allow applications to take exclusive control of this device' and 'give exclusive mode applications priority '.

  Hey Evan,

  Thanks for posting your query in Microsoft Community.

  There could be possibility of hardware problem. However, let's try the following and check.

  Run utility troubleshooting for discover connection issues that may exist, the instructions are below:

  Click Start > Control Panel

  Type of troubleshooting in the top-right search field > select "troubleshooting."

  Click "Hardware and sound" > select "play Audio".

  In addition, please refer to the tips in the article below and check.

  No sound in Windows

  Tips for solving common audio problems

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Why Apple can't do two systems? First of all, we are protected, and the other is free just like android, but in the style of the iOS and Apple needs a request so we can manage and see new products from an application and do not go on this site!

  Why Apple can't do two systems? First of all, we are protected, and the other is free just like android, but in the style of the iOS and Apple needs a request so we can manage and see new products from an application and do not go on this site!

  and I don't know that if Apple make a system more freely, there no need for any device on Earth but iPhone.

  http://www.Apple.com/feedback/

• Which applications and drivers get I need once I clean installed my Acer Aspire One 725 Windows 10?

  I already upgraded my Acer Aspire One 0725-10 Windows.  However, it seems to be an incompatibility with some of my courses installed applications and drivers that several questions.  Microsoft support reviewed my concerns and concluded that a clean install of windows 10 would be the way to go.  Before doing this, it would be probably good get applications and drivers that will be needed after the installation.  If anyone can provide me with a list, it would be greatly appreciated.

  Most of the drivers will be updated by windows update when connected to the web.

  on the applications, I think that Acer launch Manager is required to use the Fn keys:

  http://global-download.Acer.com/GDFiles/application/LaunchManager/LaunchManager_Acer_8.00.8101_W81x6...

  but... I read some discussions on the issues on windows 10 with Acer launch manager, worth a try to install.

  to check if all the drivers are installed and work properly, after verifying that all updates are installed:

  Key of the Windows logo + x
  Click on Device Manager

  If the yellow exclamation point is present
  Double click on it
  Choose the tab "Details".
  in the drop-down list, select HardwareIDs
  Click the first value and paste here

• None of the applications and games for Wrv210 router

  I just got a new WRV210 router yesterday. The wireless and everything works fine but I need to host again on Warcraft 3. On my last router it was easy, I just went to 192.168.1.1 and volla applications and games link was on top. On this new router it not yet displayed. I searched for this answer for about 4 hours and im about to give up. Please help if possible it is really frustrating me.

  As I remember, the model number of your router falls under the devices of the series of cases. I also believe that there are different web interface. If you are looking for port forwarding to allow you to open the ports for your games, you can access the user interface and then go to the Firewall tab, then select Port Forwarding (secondary tab). It works as an Application and games for the regular Linksys router.

• Code compiled with 4.5 is strange 9530 Simulator and device

  Hello

  I am writing an application that supports the level of OS 4.5.  When I run the Simulator for 9530 OS 4.7, it is acting funny.  In my application at initialization, I determine the width and the height of the elements of the display and layout accordingly.  However, when I have queries Display.getWidth () and Display.getHeight () the result returned is 320 x 240!

  I thought that this could be a problem with my installation of Simulator so I signed and tried on my Storm 9530 and I got the same results it.  If I compile with 4.7 that the problem goes away.

  I need to stick with 4.5 well.  Anyone seen anythign like that?

  Thanks in advance...

  I think what you are missing, it is that these other devices have a keyboard, where the 95xx didn't. Therefore, the operating system must provide an environment where the application will be usable, and it does this by providing a virtual keyboard, which consumes the rest of the screen.

  Have you tried to disable the compatibility mode? You can do this in the Options of the device (in Applications), and it can also be disabled in the JAD file for OTA download settings.

  Search the forum for "compatibility mode" and you'll find many, many discussions on this feature, but also the ways of working around him.

  Having said all this, my advice is to go there and have a version 4.7 for your application. If your application has any type of user interface at all, your users will be very happy with the compatibility mode on devices touch-sceen.

• Receiver 907 cod invalid after UpdateJad on the main application and library

  Hello world

  To distribute my BlackBerry live app (OTA) in the past, I would pack my main application, MyApp, and package a linked library application, MyLibrary, containing the main application resources separately.  I then copy the JAD/COD in demand for library files in the same directory as the JAD/COD of the main application files and run UpdateJad.exe on MyApp.jad and MyLibrary.jad.  At this point, I would download all the files on my web server (with the correct .htaccess file) and I could download my application on devices without problem.

  It was some time ago (one or two years).  Now, I'm updating my app and try to do it again.  However, I noticed that when I have my main application, Eclipse generates files JAD/COD for BOTH the application of the library AND the main application in the same directory of the main project of the application (deliverables > Web > 7.1.0).)  I don't think what happened in the past.  This directory contains now:

  • COD for MyApp files
  • Files of COD to MyLibrary
  • MyApp.jad
  • MyLibrary.jad
  • MyApp_full.jad (I don't remember this being produced in the past, either)

  Now, I tried to download my application in several ways, and each way gives an invalid "907 COD: error

  • Download the generated directory-is (and trying to download MyApp.jad AND MyApp_full.jad)
  • UpdateJad.exe running on MyApp.jad and MyLibrary.jad
  • UpdateJad.exe running on MyApp_full.jad and MyLibrary.jad
  • Only copies files from the generated directory MyApp and combining them into a new directory with the generated files to the separate project MyLibrary, packed (and UpdateJad.exe running on MyApp.jad and MyLibrary.jad)
  • etc... I tried practically all combinations.

  But nothing works!  However, if I install the application via MyApp.alx via BlackBerry Desktop Manager, it works.  Anyone know what could be going on here?

  Thank you!

  Hi peterstrange,

  I think I solved the problem.  I realized that I had problems downloading files on my Web server over the last two days with my standard FTP clients.  Once I downloaded the JAD/COD files to another web server, the download and the installation worked without problem (using MyApp_full.jad).

  I appreciate your prompt response to help!

• How to package an application and install it on an alpha bb10?

  Hello

  Now, I can develop my application and running/debugging Momentics. I am trying to package the application and send the package to other trials, but, without for them to build the binary file again. How ever, I can't find documentation or discussion in this frum on how to do this?

  Could you let me know if it is possible and how? Thank you.

  Dong

  Place the DevAlpha in development Mode, then the command line

  blackberry-deploy -installApp -launchApp -device  -package .bar -password 
  

• Data transfer between PC and device

  Hello

  I need an advisor. I was wondering what would be the best way to transfer data from the PC to a connected device?

  Here's the scenario: I need to download a large amount of data from a web service. To do this, I use a small application installed on the user's PC. Once the data is downloaded and converted, the application converts it to an xml file. I would push this file or string with the XML itself to the device that will be connected through the USB port.

  In addition, the scenario reversed: I can access the PC to the device file system?

  Thank you

  Daniel

  Hi Daniel,.

  You just need to synchronize data between PC and device and device to the PC. I'm wrong?

  There are 2 ways to do it.

  (1) Intellisync APIs, (Director of office requires)-net.rim.device.api.synchronization

  (2) USB connection. (Doesn't require no Office Manager)-use streamConnection

  You will get the USBsample in samples of JDE. I guess that as the example of synchronization is in examples of JDE applications.

  Please reply,

• Save for Web and devices, the operation could not be completed

  I get this error when I save for Web and devices: the operation could not be performed.

  I saved to the web before for many more complex images, largest and without a hitch.

  I use a psd format with an image that I designed. It is no more complex than others I've done. It is small, just a horizontal navigation bar about the size of the one on Apple's site.

  I tried exporting, flattening, slicing it remove the slices.

  I think it's a problem with the application itself.

  I tried to fix my permissions, restart and held cmd, Opt, Control, Shift when starting PS to reset the settings. Any idea would be appreciated.

  Try to pass like a Flash, and then delete your backup for web Pref.

  http://KB.Adobe.com/selfservice/viewContent.do?externalId=kb405012

• If I have the first generation iWatch I'll be able to get the update for new applications and look at faces?  I know that I couldn't display or the waterproof function to the water.

  If I have the first generation iWatch I'll be able to get the update for new applications and look at faces?  I know that I couldn't display or the waterproof function to the water.

  Hello

  The next operating system update, watch OS 3, will be available for all Apple Watch models, including the first generation watches.

  We should go out on 13 September, after which it can be installed by following the steps detailed here:

  • Update the software on your Apple Watch - Apple Support

  More information:

  http://www.Apple.com/Watchos/

• If I pay for an application and it does not work I would get my money back guarantee, please, thank you

  If I pay for an application and it does not work I would get my money back guarantee, please, thank you

  This is a user to user forum. You don't talk to Apple.

  You can report a problem with applications to http://reportaproblem.apple.com and request a refund as well.

• I downloaded an app from a worker ID mobile shop and I am still registered my ID and I am using the application normally but I wonder if he could access this application and see my pictures and conversations!

  I downloaded an app from a worker ID mobile shop and I am still registered my ID and I am using the application normally but I wonder if he could access this application and see my pictures and conversations!

  Any help please?

  N ° unless you have given him your Apple ID and password, in which case he would have access to your entire account.

  You must download the application using your Apple ID. Otherwise, you will have questions the next time the app must replace or update. Strictly speaking, what you were doing was not quite legal, oven if it was a free app.

• How can I solve the problem of a pop window that appears whenever firefix titled load [Javascript Application] and said: "balance.balance is undefined".

  The little ' [Javascript Application] and balance.balance is not defined ' pop-up window is followed by a pop up that shows a sign of prudence and the number 3. They repeatedly pop up when I click on the button OK or X, I have to click 10 times until they disappear. Then, Firefox seems to work normally until I exit and try to come back later to Firefox.
  I uninstalled Firefox and reinstalled without effect. I also ran a convenience store that seemed to refer to distance to this problem with no effect.
  This does not happen when I load Internet Explorer or Google Chrome. Except for this issue, I prefer Firefox over one or the other.

  Hello, you can try to reproduce this behavior when you start firefox in safe mode, once? If not, probably an addon intrudes here...

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox