Applications in conflict

Similar Questions

• Mozilla Firefox is an application in conflict and not let me install adobe flash player

  I tried several times to install adobe flash player, because this is necessary for the site I used. Adobe that mozilla is a conflicting application & installation will start when it is closed, which is not, there is no yellow tab at the top to allow me to do it, please help. I've also updated my firefox but that did not help

  You must also update your old ' Java plug-in 1.6.0_07 for Netscape Navigator (DLL Helper)

  Update the Java plugin to the latest version.

  • http://www.Oracle.com/technetwork/Java/javase/downloads/index.html (Java platform: download JRE)

• Impossible to update applications. Error 80048264

  Whenever I want to update my applications code 80048264 keeps popping up. What should I do?

  Hi, Maximilian,.

  1. Are you facing this problem on a Windows phone?
  2. This problem occurs with all the apps?
  3. Did you recent hardware or changes to the software to the computer before the show?

  You might face this problem due to several reasons such as bad date and time on the computer, using a connection through proxy to connect to Internet, corrupted, applications software conflicts etc. You can try the following steps and check if it helps.

  Method 1:
  Step 1:
  Run app troubleshooting utility

  
  I suggest you to download and run the troubleshooter modern UI App. Here is the link for your reference.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Step 2:

  
  You can go through the link and follow the steps. Here is the link for your reference.

  What to do if you have problems with a soft

  
  http://Windows.Microsoft.com/en-GB/Windows-8/what-troubleshoot-problems-app

  Method 2:

  
  Clear the cache of the Windows store

  Please follow the steps below.

  (a) press "Windows + R" key on the keyboard to open the run window.
  (b) in the type of window, run "wsreset.exe" and then click ok, it will clear all hide all Windows store.

  Method 3:
  Turn off the proxy connection

  
  If you use a proxy connection, and then follow the steps to disable the proxy:

  a. click on the gear box in the upper right corner in Internet Explorer.
  b. click on tools and then click Internet Options.
  c. click on the Connections tab, then click LAN settings.
  d. uncheck the use a proxy server for your LAN box.
  e. click Ok.

  Method 4 : make sure that the date and time are correct on the computer.

  a. check the Date/time setting by selecting the tile office and then left click on the time in the corner.
  b. click change date and time. And then check that the time zone is correct and the time of the internet tab has the ability to synchronize with the time server Internet.

  You can also see the following for more information Microsoft article.

  Why can't find or install the application on the Windows Store?

  
  http://Windows.Microsoft.com/en-us/Windows-8/why-find-install-app-Windows-store

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• Application tries to connect to a type of bad plan

  Hello
  
  I just found a very unusual thing on my Hyperion Planning (11.1.1.2) installation.
  I created two applications with two different plan types and contours (a group).
  Now, when I'm working with the second request (created later than the first), it's all right, but when I opened one, it displays a list of the forms of the second request and says that it cannot connect to the database of hyperion.
  I checked in the EA and all seems fine (first application exists and has its own type, second plan also exist, with the appropriate plan type).
  Guess the problem is within Shared Services, is I not?
  I also checked the shared application groups Services and found the plan type artifact is, for the purposes of foreground of the second type.
  
  The obvious question is how to solve the problem?
  The second question is what may have caused the problem?
  
  Thank you in anticipation of your response
  Marcin Stawny

  Hello

  You must have a schema that is separate for each application of planning in other applications will conflict, probably as you see now.
  It may be in the same oracle database (I used the term database because I didn't know if it was oracle or sql server you were using) same database, separate schemas.

  Ok?

  See you soon

  John
  http://John-Goodwin.blogspot.com

• YouTube and Skype in split screen

  So, I found a strange bug on iPad Pro 12.9. If you watch youtube videos and pull the Skype on the right side of the screen (even without typing the bar), the sound becomes very muffled and distorted.

  The sound bug prevails even after that you get from Skype or restart youtube. Only time (a minute or two) solves this problem.

  I don't think that it is a "bug".

  Skype also needs the use of speakers, and you can't have two applications that need access to the same material audio and speakers and microphones at the same time.

  This isn't a bug, but a hardware conflict.

  I bet that the same product, it you are trying to use the music or any audio application / radio when you try to use Skype of Facetime.

  These types of applications are conflict / competition for the same resources.

  You can't do that.

  You cannot use both apps audio together try to use the same internal hardware audio or even Bluetooth audio sources simultaneously.

• "Home" button does not

  I have a new problem that arises today. While through my screens at home, my phone will not pass to the main screen by pressing the Home button. Is that what the problem of ideas? It was working fine until about 01:00 today. I also noticed that double tapping the home button brings up the voice commands. Is it possible to disable this option?

  Well Yes, that took care of the action of the double tap Home key. Thank you.

  I haven't installed anything that would have created a new show today, so I'm not sure how to determine if I have an application in conflict with the function key domestic.

  Edit: I installed bike home challenge last night so that I could easily switch between the Launcher stock & GO Launcher. It took a little time, but he was apparently interfere with the key features of home. An uninstall, corrected the problem.

• When I download pureplay poker. Then go to play gets throughout the connection then freezes says not responding do not

  I found a great poker site play a lot on the site, but it downloaded version freezes when I try to play keep getting does not

  Hello
   
   
  1. when the game freezes? Is it immediately when you start playing or are - this random?
   
  It is possible that a third-party application may conflict with this game. Try to play the game in the State of clean boot and check if it works.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• decoding error 330 in Internet connection

  I recently installed the new internet equpment (modem & flat) to go beyond. Since then, I was not able to use browsers to search or even connect on some Web sites.  The error message returns: with Internet Explorer, it is: error 330 (net::err_content_decoding_failed): unknown error with Firefox, it's: content encoding error,.
  The page you are trying to view cannot be shown because it uses an invalid form or not support compression.,.

  Chrome error message is the same and underneath, it gives the error message 330, decoding failed: unknown error. It seems that Yahoo plays a large role in these error messages. My home page has been set to yahoo, but when I couldn't access the internet, I changed my MSN home page that loads correctly like Bing.com. However, when I click on Chrome, it starts to load immediately, but there is an additional tab behind which is trying to load yahoo.com. I searched everyplace in my computer and deleted everything that has to do with yahoo, but it always seems to remain a thorn in the foot.

  My support of technique of the internet provider says my DNS is set to automatic and everything is as it should be. They may not trouble shoot browser errors because it is a third party.  It's at first thought that I needed a new router because my old one was a 'g' configuration and the new system like a configuration "n". Bought a new router and installed. Nothing has changed. It works fine, but neither my husband nor I can do research online or join some websites, we could already. We can send and receive emails, but that's all.

  How can I fix the compression error message so I can use internet as it is supposed to be?

  Thanks in advance,

  V

  Hello

  It is perfectly understandable that you're very upset by what is happening.

  One of the components of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you can't connect to the Internet and you have tried all other methods to solve the problem, TCP/IP can be causing it.

  Method 1: You can try to reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:

  http://support.Microsoft.com/kb/299357

  Method 2: Check if any program or application is conflicted:

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Please post back with the result. If the problem is still not resolved, we will be happy to help you further.

• Cannot install Windows PowerShell 2.0 and WinRM 2.0, Code 80070020

  Cannot install Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista for x 64-based Systems (KB968930) Code 80070020.  I tried to install the update on 16/04/2012 (which is as far as my story goes).  Other updates were installing.

  Thank you

  E-mail address is removed from the privacy *.

  Hello

  You are able to install some other updates?

  Follow these methods mentioned below and check.

  Method 1: Sometimes, third-party applications may conflict with the installation of the security update, you can perform a clean boot and check if that helps in the installation of these updates.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After troubleshooting, be sure to start your computer in normal mode, see step 7.

  Method 2:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Try to install the update manually and check.

  32-bit - Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista (KB968930)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=9864

  64 bit - Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista for x 64-based systems (KB968930)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=9239

  For more information, see this article: problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• error code 80070020 ontrying installation on windows update kb968930. other updateas go through ok

  Windows Vista Home Basic tried microsoft fixit and this online does not help

  Hello

   
   
  What fixit from Microsoft online, have you tried and what error message did you receive?
  
   
  Follow these methods mentioned below and check.
  Method 1: Sometimes, third-party applications may conflict with the installation of the security update, you can perform a clean boot and check if that helps in the installation of these updates.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After troubleshooting, be sure to start your computer in normal mode.
   
  Method 2: components reset Windows Update
  http://support.Microsoft.com/kb/971058
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files
   
  
  Method 3:   Try to install the update manually and check.
  32-bit - Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista (KB968930)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=9864
  64 bit - Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista for x 64-based systems (KB968930)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=9239
   
   
   
  For more information, see this article: problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
   

• update cannot be installed. Error code 8024000

  KB2691905 could not be updated to install (twice) and I had to cancel the installation instruction as well. What should I do now?

  Hello

   
  Is the issue limited to this update of Windows?
  
   
  Follow these methods mentioned below and try to install the update.
  Method 1: Sometimes, third-party applications may conflict with the installation of the security update, you can perform a clean boot and check if that helps in the installation of these updates.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Please note: after troubleshooting, be sure to start your computer in normal mode.
  
   
  Method 2: Reset Windows Update components
  http://support.Microsoft.com/kb/971058
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files
   
   
   
  Method 3: Install the updates one by one and check if it helps.
  To install the update manually, follow these steps.
  a. go to: http://www.microsoft.com/download/en/default.aspx
  b. Locate the update using the KB number for the update.
  c. download and install it.
  
   
  Refer to this article for more information:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
   

• Cannot open .exe files. I get the error message by side configuration is incorrect. Event log contains contradictory elements.

  Please help me!

  I have HP Windows Vista Home Basic 32-bit. Cannot open .exe files. I get the error message by side configuration is incorrect. In the event log, it says error in manifest or policy file as a component version required by the application in conflict with one another component version already active. The two components are: c: Program Files\Viewer\Microsoft.VC80.CRT.MANIFEST.

  Problems arise when I deleted some files (don't remember which) I am now myself for kicks. Then I completely restored my system with a restore cd, upgrading to vista, downloaded all the updates and everything else works fine only problem is the opening of .exe files. Can someone please help? I'm no computer wiz only right following the indications :)

  Thank you.

  Hello

  Follow these methods and see if the problem still occurs.

  Method 1:

   

  Scan an System File Checker (SFC) on your computer and see if that fixes the problem.

  Method 2:

  Test the issue in a clean boot State.

  Note: follow step 7 to your computer as usual.

  Method 3:

  Follow the steps in this link as well.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/the-application-has-failed-to-start-because-its/c4a7c2ba-C7CD-41cb-a7ff-9fedafaf33a7?tab=MoreHelp

• Windows Vista to Windows 7 easy transfer

  I tried to use the simple Windows for Windows 7 easy transfer to transfer files on my old laptop (Vista 32-bit, SP2) for my new laptop (Windows 7, 64-bit). I downloaded the WET and I get the message "Windows Easy Transfer has encountered an unrecoverable error. Please restart application. "Tried several times. However, even though I have uninstalled/reinstalled the patch, I still get the same message.

  I noticed that several people have posted the same message; but, unfortunately, I've yet to see a resolution. Please notify.

  Hello

  ·        On what version of windows, you get the error message (Windows Vista or Windows 7)?

  ·        Where do you get this error message (when you try to install the easy transfer Windows or when you try to transfer data)?

  Method 1:

  If you get the error message during the installation of the application on the Windows Vista-based computer, try to re - download the app and check if that helps.

  Download link

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=09D80814-2A73-4245-A63B-8E780D0430CB&displaylang=en

  Method 2:

  You try to run the application after you have configured your computer to clean start state, so that nothing of the application third conflict while it works. To configure your computer to clean boot follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  For more information follow the links below.

  Upgrade Windows Vista to Windows 7 (custom installation)

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7-custom?T1=Tab03

  Transferring files and settings: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/transferring-files-and-settings-frequently-asked-questions

  Transfer files and settings from another computer

  http://Windows.Microsoft.com/en-us/Windows7/transfer-files-and-settings-from-another-computer

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Avatar prevents Windows stops

  When you try to restart Windows 7 I get a message "waiting for Local RFP Avatar, this program prevents closing of windows.  I was not aware of having an Avatar or what one is in terms of PC operating systems.  Is - this developer of malware?  Any problem with just executing a hard stop and restart?

  Hello

   
  Please contact Microsoft Community.
   
  There could be a possibility that the third-party application are contradictory.
  I suggest you to start your computer in safe mode and check if you get the same problem or not.
   
  Start your computer in safe mode:
   
  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.
   
  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7
   
  If the problem does not persist in safe mode, I suggest you place your computer in a clean boot and the devil who the third-party application, is conflicted:
   
  Perform the clean boot
   
  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
   
  How to perform a clean boot in Windows
   https://support.Microsoft.com/en-us/KB/929135
      
  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.
   
  I also suggest you to use Microsoft Safety scanner and check if there is a malicious software on your computer.
   
  Run the Microsoft safety scanner.
   
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps.

  Kind regards

  Anusha

• Why has my Windows 7 Home ceased to recognize the Fat32 drives?

  Until a few months ago, my Windows 7 Home had no problem reading disks formatted FAT32, including my HTC Incredible phone. But now he wants to just get myself in shape every time that I connect them via USB. The same readers are very well read by my laptop Windows 7 Starter and a Windows XP computer. I even tried connecting to a Windows 7 computer to work, and he wants to format the drive as well. I was installing a bad update or it will be a fix soon?

  Thank you.

  Hello

  Thank you for visiting Microsoft Community.

  From your description, I understand that Windows 7 does not recognize Fat32 drives.

  Please don't worry. I'll try my best to help you.

  Did you change your computer?

  Method 1: Run the troubleshooter to solve hardware problems or unknown device:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Try the procedure described in the article below:

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Method 3: Scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 4: Check which application is conflicted:

  Step 1: Start your computer in safe mode with networking

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Note: Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed

  If the problem does not occur in Mode safe mode with networking, we can use the approach 50 / 50 to narrow down the root cause of the problem.

  Step 2: Refer to the section below for instructions on how to start your computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Please follow these recommended steps, review the additional information provided and post back if you still have the problem. I'll be happy to provide you with additional options available that you can use to get this problem is solved.