Apply filter to s:bitmapImage takes images disappear!
I wonder if anyone can help... I try to apply a filter to s:bitmapImage, but no matter if I do this in as3 or mxml as soon as I apply the filter the image disappears! I tried with different kinds of filter (shadow, glow) etc but all do the same thing? Without any filter, the image is perfectly fine show!
The source of my s:bitmapImage is generated programmatically at run time and is connected by a link...
Can someone tell me what I am doing wrong?
Thank you
Select this option.
Hello
I think it has something to do with how the bitmapimage spark is generated, she works mainly with coating, there is no magic dynamic passing when it instantiates, change it when running is to force the replacement of its content, I suspect that the filtering is done by this "fudge" on the more dynamic capabilities of mx image.
David.
Tags: Flex
Similar Questions
-
ColorMatrixFilter takes images disappear
I'm trying to use a ColorMatrixFilter to adjust an image - a sprite (using filters) or bitmap (using applyFilter), but every time that it runs, the image disappears completely.
For the sprite, when I erase the array of filters, the image reappears. I was not able to get the bitmap to do the same thing again.
I have seen many people post a similar question - is this a known issue or something to do with the parameters being not quite right?
Hello
Try this:
var cmf:ColorMatrixFilter = new ColorMatrixFilter([)
0.5, 0, 0, 0, 0,
0, 0.5, 0, 0, 0,
0, 0, 0.5, 0, 0,
0, 0, 0, 1, 0]);
image.filters = [cmf];
PS: you can not cancel a call applyFilter on a bitmap - you should keep a copy of the original bitmapData and then restore to 'Cancel' the filter.
-
In Premiere Pro CC 2014, the image disappears when I apply a mask of an effect. Why?
Too bad...
Fixed:
adjustment of projects > switch Renderer.
Thank you
-
Images disappearing because of the URL slash - CS3
Someone knows why this happens?
When I type the URL: http://www.aspirationsresume.com/Samples/Admin/AdminProfessional.html all the images are there.
When a slash appears at the end of the URL, such as http://www.aspirationsresume.com/Samples/Admin/AdminProfessional.html/ the images disappear.
And since I have started to develop web pages in Dreamwearver CS3, Google indexes random URLS with or without the trailing slash. All my other pages developed by Homestead Sitebuilder are naturally indexed by Google without the trailing slash.
Any help anyone could give would be GREATLY appreciated.
Here is a link to one of your images-
This link gives the following message in the browser:
* starting at the current location, go to the top of both files, look for a folder named "Images", there is a folder named "DreamsMatter" and we find the image. Now, when your url has the slash at the end, the browser think it's at this point in the record-
http://www.aspirationsresume.com/samples/Admin/AdminProfessional.html/
and going back two records would take to this place-
http://www.aspirationsresume.com/samples/
where it will find the folder called "Images". But it is false, because this folder is actually at a higher level. The desired image is here-
http://www.aspirationsresume.com/images/DreamsMatter/00_eval.gif
That's why your images disappear. The slash at the end mess up to the ability of the browser to correctly locate the images with a link to the document. Now, if this link was a relative link to the ROOT or an absolute link, then it wouldn't matter. So, if the above image tag looks like this-
-
I had set up my new tab page with an image I have uploaded. It worked fine for months, or even years.
Today, I had a 'crash' that asked me to start Firefox in "safe" mode or "restore". I chose "restore."
On this, my image disappeared from my the new tab page. I can't find how to restore and Add ons that supposedly allow me to add my own image are not useful. At least, I can't understand them.
Can provide you assistance on a computer for Dummies level?
If you deleted the folder "Old data Firefox" you have not the ability to restore your previous profile data.
If it's an image you have stored on your computer, you can open this image in a Firefox tab (Firefox > new tab > open a file).
This will give you the file:// URL in the address bar and you can use a copy and paste this file is enabled in the new tab page.You can set the browser.newtab.url pref on the topic: config page and set the value of this pref on this URL for you the new tab page.
You can open the topic: config page via the bar addresses as you open a web page.
-
Original title: race Roller Coaster Tycoon 3
When I start RCT3, I can hear the sound of the game, but the image disappears. It's almost as if the monitor is disconnected from the computer. This could be the cause?
Hi Redbaron666,
Have you checked if the game works the clean boot?
I see that Rollercoaster Tycoon 3 is not compatible with Windows 7 which could be the cause of this problem:
Windows 7 Compatibility Center
Method 1: You can run the game in compatibility mode and then check
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
Thanks and greetings
Ajay K
Microsoft Answers Support Engineer
***************************************************************************
Visit our Microsoft answers feedback Forum and let us know what you think. -
Images disappear after loading another view with webview
Okay, so at the beginning I had an old bar which was signed and I put that on the playbook to see what features it had. This bar has worked exactly how it was supposed to. I got the source and I had to change something, but first I had to update the sdk because I do not have the old sdk that it was built with, built when air 2.5 was outside. Everything I've done has been 3.1 the air version and the update includes the blackberry tablet sdk. He compiled and loaded on the perfectly good playbook, but after that I click on an image which acts as a button that goes to a view with a webview inside, and return to the original view, all the images in the initial view disappeared and I can't click on any one of them.
It's weird, I remember what happens a long time ago and it has to do with something on the change of AIR/SDK, but I just do not remember what is the cause... If anyone knows what could cause the webview make the images disappear on a reload of a DIFFERENT opinion, let me know. BTW, webview was destroyed on the previous view.
It was a problem with webview I suppose, very unstable object implementation...
-
File size swells when the applied filter
I use Fireworks as part of my work which ends in png Fireworks used as a layer in Illustrator and eventually have exported in the form of SVG.
I needed bring the original png in Fireworks to change light levels.
It worked well, but the filter has more than doubled the size of the resulting each SVG file.
Is there a way to 'apply filter' permanently for the file sizes may come down to their point of reference?
Another option could be to batch through photoshop if it would give me an option to reduce the effects.
Any help would be appreciated.
Thank you.
Tracked down the problem - and the increase in size had nothing to do with the filter.
The first time I had recorded files, I used the feature of agricultural area, and who grew up an optimization dialog box automatically.
With resave ordinary, she didn't cross the optimization, so much larger files.
Optimization of restored files to their previous (smaller) size even with the filter in place.
-
Why do some images disappear in AS3?
There are 17 symbols has my project. Each symbol contains an image. It's displaying required 9 random images and mix. symbols are named: p1, p2, p3 and so on... The project works properly, but only one or two images disappears from the 9 random images!
I can't find the reason? Would you help me, please? Thanks in advance,
This short images has 3 (CTRL + Enter) my project.
Here is my code:
Stop();
var i: int; i = 0;
var PIC: Array = [9];
var c: int;
do
{
PIC [i] = randomRange (1: 17);
for (c = 1; c < i; c ++) / / the 'loop' for prevents resuming designs
{
If ([i] peak is peak [i - c])
{
PIC [i] = randomRange (1: 17);
trace ("repeated pic:", c)
c-- ;
}
}
rearranging some picturs using nine conditions 'if ':
If (i == 0)
{
This ['p' photo [i]] .width plus 175;
This ['p' photo [i]] .height plus 175;
This ['p' + photo [i]] .x = 100;
This ['p' plus photo [i]] there is 75;
trace (i);
}
If (I == 1)
{
This ['p' photo [i]] .width plus 175;
This ['p' photo [i]] .height plus 175;
This ['p' photo [i]] .x plus 280;
This ['p' plus photo [i]] there is 75;
trace (i);
}
If (I == 2).
{
This ['p' photo [i]] .width plus 175;
This ['p' photo [i]] .height plus 175;
This ['p' photo [i]] .x plus 460;
This ['p' plus photo [i]] there is 75;
trace (i);
}
If (I == 3) / / new line
{
This ['p' photo [i]] .width plus 175;
This ['p' photo [i]] .height plus 175;
This ['p' + photo [i]] .x = 100;
This ['p' plus photo [i]] there is 255;
trace (i);
}
If (I == 4)
{
This ['p' photo [i]] .width plus 175;
This ['p' photo [i]] .height plus 175;
This ['p' photo [i]] .x plus 280;
This ['p' plus photo [i]] there is 255;
trace (i);
}
If (I == 5)
{
This ['p' photo [i]] .width plus 175;
This ['p' photo [i]] .height plus 175;
This ['p' photo [i]] .x plus 460;
This ['p' plus photo [i]] there is 255;
trace (i);
}
If (I == 6) / / new line
{
This ['p' photo [i]] .width plus 175;
This ['p' photo [i]] .height plus 175;
This ['p' + photo [i]] .x = 100;
This ['p' plus photo [i]] there is 435;
trace (i);
}
If (I == 7)
{
This ['p' photo [i]] .width plus 175;
This ['p' photo [i]] .height plus 175;
This ['p' photo [i]] .x plus 280;
This ['p' plus photo [i]] there is 435;
trace (i);
}
If (I == 8)
{
This ['p' photo [i]] .width plus 175;
This ['p' photo [i]] .height plus 175;
This ['p' photo [i]] .x plus 460;
This ['p' plus photo [i]] there is 435;
trace (i);
}
trace (ISB);
i ++ ;
}
While (I < 9)
function randomRange(minNum:Number,_maxNum:Number):Number / / this function generates a random number
{
return (Math.floor (Math.random () * (maxNum - minNum + 1)) + minNum);
}
Here is another way to organize the symbols:
var column:Number = 3; var i:uint; var list:Array = []; var pic:Array = []; stop(); for(var p:uint=1; p<=17; p++) { list.push(this.getChildByName("p" + p)) } shuffle(list); pic = list.splice(0,9); for(i = 0; i < pic.length; i++ ) // Arrange the symbols { pic[i].width = 175; pic[i].height = 175; pic[i].x = 100 + Math.floor( i % column ) * 185; // the pic width + 10 as space pic[i].y = 100 + Math.floor( i / column ) * 185; } function shuffle(a:Array) { var p:int; var t:*; var ivar:int; for (ivar = a.length-1; ivar>=0; ivar--) { p=Math.floor((ivar+1)*Math.random()); t = a[ivar]; a[ivar] = a[p]; a[p] = t; } }
-
Is there a way to apply the shadow to a masked image effect?
Is there a way to apply the shadow to a masked image effect? (Hidden through the default effect video opacity). When I try to do, the shadow effect applies to any image not only the hidden portion.
I have not messed with the masks very well, but you're right. The shadow does not work on a masked image.
I got it to work if by nesting the masked image.
-
Why my image disappears when I place
I have no idea whats going on, but when I import an image and then put, she disappears. Help, please.
I found the problem. For some unknown reason, some images disappear, but what I understand is that if you try to force quit photoshop, it will ask to place your picture, place and then everything just cancel and not close the program completely. Its importation through the directory file does not much...
-
When I saw my site all my images disappear, but they work in dreamweaver?
When I saw my site all my images disappear, but they work in dreamweaver? No broken links I can clearly see them in dreamweaver, but I can't see not them on the prieview in my browser, it just happened all of a sudden.
OK, so the
-
Text and images disappear in overlays frame scrolling when you turn the iPad
I'm having this problem:
When I rotate from portrait to the horizontal, content scrolling frame iPad disappears, the same phenomenon occurs if the first view is horizontal to vertical.
The names of levels of different content and images are different.
The problem comes with the app Adobe Content Viewer of an iPad 3.2.1 version 3 with iOS beta 7 v.6 so that this does not happen on an iPad 1 with iOS 5.5.1 the file downloaded to the producer Folio folio is the same.
Suggestions to solve this problem?
Below is a short video showing the scrolling image, text and images disappear in two articles (but this happens in all pages)
A fix for a nearly identical issue was released on 13 September. Did you rebuild the application and try again?
-
Apply same Perspective transformation to multiple images?
Hi guys... I have a set of images, and I want to apply the same transformation of Perspective for all images. Note that all images have the same size, which means that, after applying the same transformation of Perspective, they should all have the same size.
For example, here is the transformation I want:
Of this:
To do this:
Problem is that when I manually apply the transformation for each image individually, they do not have the * exact * same size thereafter.
Is there a way I can simply apply the transformation to a single image, and then this transformation is applied to the other images? I think I can use the functionality of the dynamic object here, but I have no experience on it.
I'm not sure.
You can try a save action and see.
Before recording the action on leaders percent units.
(View > leaders, then right click on the rule and choose percent)
-
model background image disappears when I make a new page of the model
I have a background image in my container in my model. When I make a new file based on this model, the background image disappears. No idea why?
Open your child page in code view.
Correct the path to your background image manually as described in my previous post. Record. Preview in the browser.
This aid?
Nancy O.
Maybe you are looking for
-
Before I updated to the current version, I checked for "reserves" and found nothing to indicate that the Zone Alarm Extreme Security, ForceField was not compatible with the Version 16.0.2. If I had known that I would not have updated. Y at - it no us
-
Cannot close tab groups. Close button fails even with an empty window.
When I create groups of tabs, I can't close. The red X close tab group button does not work. I can resize, add or remove sites, or even remove all sites. But I can't get the button close the tab of the function group.
-
hp15R032TX: drive hard red turnd
THE READER "RECOVERY D ' TURNED TO THE RED AND THE BLUE COLOR. BUT SHOWS EMPTY...
-
Re: Satellite L300 - 1 5 - where to get the Toshiba Recovery disk?
I had Windows reinstalled on my laptop after having a problem with the BIOS (result of having windows and ubuntu on the same machine! But I know want to do a recovery disc that I forgot to do this before. I downloaded the creator of recovery disk but
-
Hello I want to buy the computer HP ENVY Phoenix 810 desktop PC - 170st but I want this computer with the Titan Gefroce gtx graphics card. Is this possible?