File size swells when the applied filter

Similar Questions

• File size increased when the convert .docx in .pdf

  Hi all

  I had problems with Adobe: I need to convert a lot of Word (.docx) documents in Adobe (.pdf) files. I need to limit the size of these documents as there are limits to my project. I converted a 27 k file recently and it turned out as a PDF 207 kb. When I save it, I select "Minimum size" when registering in the box 'optimize for '. As I know, during the conversion, the .pdf files should be smaller than the original files. Please help me on this

  I use Microsoft Office 2013 and Adobe Reader XI (11.0.06)

  Not bad. Different.

  As it seems that you convert to save in Word, rather than using Adobe software. If you have Acrobat Pro, you can both use it to make the PDF (many different ways, many parameters) and analyze the use of the space.

• Is there a maximum file size limit when combining pdf files

  I try to combine files 8 created PDF files with I Explore using Acrobat Standard XI, the process is finished but when opening the file, that not all of the 8 individual files were combined only the first two have been combined, process shows the eight being read and combined.

  I can open and view each of the 8 original individual files and read the content without any problems, the biggest of the eight files is 15 559 kb and the smallest is 9 435 Ko

  If anyone can help that would be most appreciated

  Hi Tayls450,

  It should not happen because there is no maximum file size limit when combining PDF files.

  Please let me know if there is some password protected PDF files also?

  Also, I suggest you to choose the "Repair the Installation of Acrobat" option in the Help menu.

  Kind regards

  Ana Maria

• The file size increases until the application fails

  Win xp + flash player 8 and flash 8 of what THERE is IS a KIOSK PROJECT, no browser involved.
  
  Greetings.
  
  I have a kiosk project that loads external swf very large (200-300 MB) with video integrated in function 'screen saver '. The screen saver charge (and discharge) maybe 3 or 4, and then, on the 5th, the application does not load the SWF file. I also get an "out of virtual memory" message to the taskbar.
  
  Based on that observation, I began the follow-up of the 'task manager' for 'Util' and found that every time the screensaver Manager, a few hundred MB would be added to the Page file... AND HE LEFT. Thus, with each screen saver successive loading, the PF would get more increasingly broad.
  
  I think this is the reason for the swf screensaver which stops loading after a certain number of times.
  
  I've tried the settings of FP in great settings windows, but doesn't seem to help. The swf file stops loading when the PF is about 1.5 to 1.7 GB, even if I set the pf max to 4096 MB.
  
  Is it then possible to "empty" the PF during the unloading of the extern SWF?
  
  ADDITIONAL TESTS:
  
  I did a few tests more. I made a test database movie that loads an external swf, the code below.
  
  the "loadtest.swf" is a large TIFF on the stage which gives the swf file to a size about 5 MB. Also on this SWF is a button that calls removeScreenSaver() to discharge.
  
  What I have observed in this test, it's that when the loaded swf file is removed, PART of the memory is cleaned file exchange, but NOT ALL about HER. Therefore, it has the same potential problems.
  
  This seems to be a pretty huge problem but I got no. chance find all messages or help on this?

  Download a trial version and try it please.

  http://www.Jugglor.com

  Is your main file a file of projection?

  You do not have all of the files inside the exe, you can use the LOCAL %
  to play SWF files.

  Read this
  http://www.FlashJester.com/?section=FAQ&cPath=14_55#395

  Also we recommend that try to reduce the size of your SWF files and test
  If that helps.

  --
  Concerning
  FlashJester support team
  e. - [email protected]
  w. - http://www.flashjester.com

  There is a very fine line between "hobby" and
  "mental illness".

• Cannot connect to the local file and print when the domain controller is not available because the network connection

  Hi all
  Having problems for local users, connection to a file and print server in one of my satellite offices.
  When my t1 connection is disrupted (problem of local carrier) my users when the connection is down to connect to the file room and print and always have access to their files and the local printer.
  The domain controller is off site in my main office.
  Environment:
  All local desktop clients are windows machines 7.
  Printing and local file is a windows 2003 server.
  DC is window 2008
  Note that we recently changed all 2003 to all domain controllers the PDC 2008, suspect that it may cause the problem, but just cannot know where it track.
  Any help or thoughts would be appreciated.
  Thank you

  Hello trj'hwma,

  Thank you for the question!

  It's discouraging to know that have problems you with the local file and print. As I understand well you cannot connect to the local file and print when the domain controller is not available because the network connection.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  Windows 7 IT Pro category

  Answer to us if you have problems with the local files and print or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Printing of the .pdf of the 2013 project file will stop when the name of the file must be written. Project 2013 crashes. Anyone know what the problem is between 2013 project and Adobe Acrobat 9?

  Printing of the .pdf of the 2013 project file will stop when the name of the file must be written. Project 2013 crashes. Anyone know what the problem is between 2013 project and Adobe Acrobat 9?

  The family of products Acrobat 9.x passed in mid-2013 "end of Support".
  Using Acrobat 9 of MS Project via PDFMaker stops with Office 2007.
  To 2013 Office support, you must use Acrobat XI (11.0.1) or newer.

  A good reference:
  https://helpx.Adobe.com/Acrobat/KB/compatible-Web-browsers-PDFMaker-applications.html

  Acrobat Pro and Standard DC are what are currently available for purchase.

  Be well...

• Why the JPG file size decreases when Lightroom writes meta data?

  Lightroom uses the files sidecar XMP for meta data history for RAW files. When writing the metadata (e.g. tags) to JPG files, they are written directly in the header of the file. This should leave the image information in the file intact. However, the file size decreases (about 0.02 MB) when Lightroom writes metadata for the original JPG file. As far as I could see, the image information remain unchanged and no other information in the header is deleated, but why decreases the size of the file then (I expect to increase slightly or stay the same)? I work with RAW files for most but sometimes I just versions of the files to work with JPG and I don't want to lose any information.

  Thanks in advance for your answers.

  Kind regards

  me

  The number 13 in FAQ on the web site of ExifTool treats this effect:

  http://OWL.PHY.queensu.ca/~Phil/ExifTool/FAQ.html#Q13

• Legend field size changes when the cursor moved legend

  So weird, I don't even thought it, but here it is:

  In VI attached, I have legends of the parcel next graphics, if I can put checkboxes next to them for the turning on or off the channel display.  In the third, I need to include the sliders, but when I did the legend of cursor visible and moved (it automatically appears on the side, under where I put the legend of the plot), the legend of plot in size changes.  It is shortened, which is annoying, but also means that it is more aligned with the checkboxes.

  I tried to use the PlotLegend:Height property and managed to _read_ it is, indeed, evolution, but I can't put it (or rather, I can't do it to _stay_ together).

  Even more strange: when I open the file on my laptop, the problem of size change does not occur, BUT the legend of the plot begins with a different size of the boxes!  I know that I can use 'Objects to scale with the Panel', but I've always shied away from that, due to problems of size and text beside it, since I am defining the size of the Panel, things really should be the same size, anyway.

  Because of the issue of the different-monitor-size different, I don't know if the version of the file's "modified" screen will show the problem, but I have attached, in the case.

  Any ideas?

  specifications that might matter:

  Desk at work: machine card Dell with Windows7 64 bit AMD Radeon HD7470 graphics LabVIEW 2012 SP1

  laptop at home: Dell Latitude E5430

  Thank you!

  Well, it's certainly weird - it does on my PC as well. I have no explanation for it.

  Perhaps a solution you can use the checkboxes in the visibility field integrated instead. You wouldn't need a separate control.

  Right click on the legend of the plot and select 'Visible Elements' > 'plot visibility Checkbox.

• BlackBerry Smartphones how can I increase the maximum file size allowed on the media?

  Whenever I have record video using the video camera, after a very short time it will stop recording and gives a message 'maximum size of the file reaches. I've adjusted the settings to save in 'Normal' mode, but while recording appears in last a short time, the result file size is way too big to be able to easily send to contacts. When you use the MMS mode the recording time is much too short. Is it possible to increase the maximum allowed size of the file so that a resulting video would be about 3-4 MB or less?

  You can download any software video conversion on the net. just try this one "Freestudio".

• Why a jpg file size grows when I OPEN it in Photoshop before you do anything for her?

  I open a jpg file which my trusty Mac tells me is 2.4 MB, but Photoshop has immediately 34.8 Mb in size of the image. It is a picture of 72 dpi which is 59,333 inches width x 39,556 inches in height. I want to REDUCE it to one 17 "(approx.) size 11" for printing, which allows Photoshop to increase the resolution. I UNCHECK resample, and enter a width of 17. I have 17 inches wide; 11,333 inches and a resolution of 251,294 inches. Great! What I don't understand, however, is that - without Photoshop add no matter what pixel (remember, I REDUCE the size of the photo without resampling) - the size of the file is more than 14 times larger. The same thing with each jpg Photoshop I opened: 129Kb photo opens in Photoshop to 482.6 Kb; a 1.2 MB file opens to 5.49 MB, etc. I didn't not do anything at all, but open them. Without a doubt, it's something I should have learned (maybe you) long, long ago, but it has baffled me now. Very grateful for any help.

  The size you see in the finder is the compressed size. When you open it in Photoshop, you can see the enlarged size.

• Using 5.7 LR on a Mac, how do I file to display when the image import?

  Something has changes on my Mac using Lightroom 5.7. When the import images the file management section does not appear in the right column. Show the other sections (change file name, of the apply during import and Destination). What can I do to recover the management of files, which is necessary to create a backup copy of my images on another hard drive.

  Right click on one of the other section headers. In the context menu that appears, make sure that there is a check mark in the management of files.

• iTunes says files in iCloud when the library is stored locally

  I am a subscriber of Apple's music. Just upgraded to the latest iTune 12.4.1.6 on my PC Windows 10. This PC stores all my music files taken from the original CD. Just noticed that all my music now has icon cloud beside him and I get the option to download. Before clicking play a music file information would show the way to the file on my PC. He said now iCloud status: Apple music and location: iCloud.

  That's happened? Why iTunes is no longer using the local files and try to play my music to iCloud?

  Is this the 'normal' behavior now?

  What happens if I unsubscribe from Apple's music in the future?

  The original files are still in the directory Musique\iTunes\iTunes Media\Music.

  show preferences iTunes library is in the same place, maintaining organized files and the files are copied to the media folder when adding to library.

  See you soon

  See the empty/corrupted after upgrade/crash iTunes library.

  TT2

• Format of file not supported when the file is on SD card

  Hello

  the file (format FLAC) is in my SD card in my sport Clip. When I want to hear it, I get the message "Unsupported File Format". All the other files on my SD card works fine.

  I put the file in my PC and I listen to it. Normal

  I transfer the file to the internal memory of my sport clip. It works well

  I transfer the file to the SD card in my Clip Sprt in another directory. I get the message "Unsupported File Format".

  Strange, isn't it? This file only work in the internal memory, SD card. Anyone has any idea why and what can I do?

  I use an SD. 128 GB SDXC card, in the format extFAT

  Laurent

  A few questions:

  Your Sport Clip recognizes the main directory on your micro SD card files (music, Audio books, Podcasts, etc.)?

  Your Sport Clip recognize and play files mp3 that you have copied to your micro SD card?

  If this isn't the case, maybe try to re-formatting in FAT32? Then insert the card while the player is turned off, then turn on the player.

• The .article file size view of the dashboard

  Is there a way to look at the file size of an article of in the dashboard?  some converters API and/or article download files section generated directly to the cloud of Adobe and so a local version of the article does not exist. How can we consider the file size of the articles auto-téléchargées?

  There is no way to do it from the dashboard unfortunately.

  Neil

• Excel file is empty when the burst!

  Hi all

  RDBMS: 11.2.0.3.0

  Oracle Applications: 12.1.3

  I'm new to break and I'm having a problem.  When my output type is Excel the file attached to the email is completely empty!  If I just change the type of output to PDF, my data is here!

  Anyone know what is happening here?

  Here's my break control file, I have some data for a sanitized public viewing...

  Any help is greatly appreciated!

  {code}

  <? XML version = "1.0" encoding = "UTF-8"? >

  " < = xmlns:xapi xapi:requestset ' http://xmlns.Oracle.com/OXP/XAPI "type ="break"> "

  < select xapi:request = ' / MWACIIER/LIST_G_INTERFACE_CONTROL/G_INTERFACE_CONTROL/LIST_G_ERRORS/G_ERRORS ">

  < xapi:delivery >

  < xapi:email server = "00.000.0.00" port = "25".

                       from=" [email protected] "RΘpondre α =" [email protected] ">

  " < xapi:message id ="123"to =" ' [email protected] 'cc =' "attachment = 'true' content-type 'text' subject = 'Test out' = >

  < body >

  The error report is attached ready for you to review. < br / > < br / >

  Text here! < br / >

  More text here! < br / >

  < / body >

  < / xapi:message >

  < / xapi:email >

  < / xapi:delivery >

  < output = xapi:document "test2.xls" output-type = "excel" delivery = "123" > "

  "< xapi:template type ="rtf"location="/ua4001/oracle/MFSGUAT/apps/apps_st/appl/xbol/12.0.0/xml/MWACIIER.rtf "> < / xapi:template >

  < / xapi:document >

  < / xapi:request >

  < / xapi:requestset >

  {code}

  Here's my problem, it's related to the messaging tool that I use to watch the attachment...

  You use Microsoft Outlook Web Access (OWA) 2007 access one
  mailbox on a computer that is running Microsoft Exchange Server 2007 Service
  Pack 1. When you download a .xls file attachment and then try to open the
  file, the downloaded file is empty.

  This problem occurs if the .xls file contains XML data. In
  Exchange Server 2007, if a file that contains the XML data is associated with a
  message, the XML content in the file is removed when you open or save it
  attachment using OWA.

  To resolve this problem, install the update rollup 6 for Exchange
  2007 service Pack 1.

  For more information about the update rollup 6 for Exchange Server 2007 Service
  Pack 1, see the following Exchange Help topic:

  Description of
  The update rollup 6 for Exchange Server 2007 Service Pack 1

  ( http://go.microsoft.com/fwlink/?LinkId=152555)

  For more information on how to get the last Exchange
  service pack or update rollup, see the following Exchange Help topic: