Apply same Preset to the queue of multiple rendering

Similar Questions

• 10.3 Lumetri does not apply when sent to the queue of the SOUL of first.

  Since update to 10.3 SOUL no longer export LUTs added to the first use of color Lumetri sequences. I had this problem before where a LUT does not exist in the technical dossier of the SOUL, but I checked, and the same exact file is both:

  / Applications/Adobe Media Encoder 2015.3 CC/Adobe Media Encoder CC 2015.app/Contents/Lumetri/LUTs/Technical/VLog_to_V709_forV35_ver100.cube

  / Applications/Adobe Premiere Pro 2015.3 CC/Adobe Premiere Pro CC 2015.app/Contents/Lumetri/LUTs/Technical/VLog_to_V709_forV35_ver100.cube

  When previewing in the export in the first settings dialog, I see that the LUT applies very well - img 1 - but when looking at the same dialogue in the queue of the SOUL not - img 2 - if something is getting lost when sent to the queue of the SOUL (Interestingly, looks like it's something that there is a slight modification of the original without added effects item - img 3)

  It was all working fine in the latest version. Tried clearing the cache, preferences, etc. Does anyone know a fix? Now I can just direct export of first, but it's not ideal...

  

  

  

  OK I got it. The LUT folders in the folders of the Pr and SOUL must be exactly the same, that is, not only have the same files inside, but the same number of files too.

  It seems that Pr will tell SOUL to use the Nth file in the folder structure rather than seek a cube file name. I tested it work with by inserting an additional file dummy in lut SOUL record, and, of course, he always picked on the next lut down from that used in the PR.

• How to apply a preset to the United Nations

  This is probably very simple, but I'm not sure how UN-appy a parameter preset in the preset pane.

  I'd like to refer to the original.

  Thank you

  Hi richvideo,.

  You can go to the history panel in the develop module and select the last step before you apply the preset to cancel the effect.

  Or, click Reset button at the bottom right to develop the module to cancel all the settings applied to this particular image.

  Kind regards

  Claes

• How to apply the model to multiple pages at once?

  My site has about 4000 pages, I want to apply the template to all existing pages at once. Is there a procedure of application of the model to multiple pages.

  Please suggest me.

  I had the same problem and although it is a very old thread, I would like to share my solution with those who find this via google, too (like me):

  Follow these steps:

  1. Open the files in a text like Sublime edtor (impossible in Dreamweaver when the model area is locked).
  2. Use the "Find and replace" to replace each text with the name of the new-model .dwt .dwt in open files.
  3. Save files.
  4. Inside Dreamweaver go to 'Edit' > 'Models' > 'update Pages. In the dialog box, select "Find in files" and choose the name of the former model and click on 'start '.
     If there are areas of the unequal model, there will be one or more dialog boxes where you can select how DW must correspond to these regions (for all files).

  Source: WikiHow > How to apply a template Dreamweaver to several files

• How can I change the optimization of the record to multiple records at the same time?

  Hello world

  I have a ton of TV shows torn on my computer of my DVD collection and organized with several files, like this:

  TV shows > the name of the slide show > season XX

  So in the case of television broadcasts, I have a folder for each show. Then, within each folder of the show, I have a folder for each season, records for the images of the actor, as well as images and art show. Then, in each case of the season, I NFO with metadata files and video files themselves, as well as screenshots from each episode. I want to do is have each season should be optimized for video, but senior records (TV Shows and Name of Show) to the difference. So far, the only way I found to do this is to go to the properties of each folder and manually set. Is it possible to change the type of folder all files with XX season are the same, without changing the records above them?

  Take a look at this, I recorded a short video demonstration of how do.  It is not really intuitive, but once you know how you can get it done.  Apply the Styles folder to all subfolders [Video]

• If I buy a monthly subscription can I load the application on multiple computers that I have on the same e-mail ID?

  If I buy a monthly subscription can I load the application on multiple computers that I have on the same e-mail ID?

  Hi rlp54163129,

  Acrobat can be installed on both systems, however it will be enabled only on a system at a time.

  In order to install & activate multiple system you need to subscribe to it for the entire system, or you can go for volume license.

  Kind regards

  Nicos

• How can I request the same information in the fields of specific metadata across multiple files, i.e. date of reference, artist, genre, composer, technician

  How can I request the same information in the fields of specific metadata across multiple files, i.e. date of reference, artist, genre, composer, technician.  Most of the fields I want to fill/use will be the same for files of 50-100, then each file will have a few things specific to that individual file.

  Unfortunately, it cannot be done from within hearing. Adobe Bridge is probably the software you need to do this or there are a few applications available third-party metadata. I use metadata Touch.

  MetadataTouch - powerful multiformat metadata editor

• Lightroom 3 - How to batch process a group of photos with the same preset?

  Using Lightroom 3/Mac.  Try to apply a preset to a group of photos. I already read on the forum but what I read didn't make sense to me. I'm sorry. Also I was wondering if anyone else is facing the trend of Lightroom to support the monitor. Whenever I want to switch to another application, I end up having to "Hide Lightroom" so that he can move. Any thoughts?

  Thank you.

  Russ

  Altadena, CA

  ahreff wrote:

  Using Lightroom 3/Mac.  Try to apply a preset to a group of photos. I already read on the forum but what I read didn't make sense to me. I'm sorry. Also I was wondering if anyone else is facing the trend of Lightroom to support the monitor. Whenever I want to switch to another application, I end up having to "Hide Lightroom" so that he can move. Any thoughts?

  Probably the best way to apply a preset to a certain number of photos is to apply to a, then selective sync changes for other pictures.

  Lightroom has three main display sizes.  Use 'F' to pass through them.  You're probably on the version full screen, which uses the entire screen.

• How can I distinguish multiple tabs of the same site in the tab bar?

  Hello

  I did some massive open courses online (MOOCs) and its been necessary to have several tabs open at the same time for the same site. I would like to be able to distinguish these tabs by being able to put a tag instead of the url of the site ('instructions', 'template', 'code', 'scratch', 'docs' etc. etc.) and/or a color code.

  Does anyone know if and how this can be done?

  Thank you very much

  Tabs of colors, but the author warns that it does not work with other tab-related extensions, you will probably need to continue to look for one that does everything you want:

  https://addons.Mozilla.org/en-us/Firefox/addon/ColorfulTabs/

  If you can't find an extension of do-it-all, you can change the titles of tab with a userscript specific to this Web site. This is because the tab displays the text designated as its title page.

  You could "hard-code" the list of words for each page, or you might have a script to extract information from the page, for example, the first main star or some other kind of predictable data. The script then insert your favorite as the title of the page and Firefox text displayed on the tab.

  To see how that appears, to see if it would help, you could do this experiment:

  On a web page that contains text of the pointless tab, open the Web Console using Ctrl + alt + k (Windows: Ctrl + Shift + k). Paste the following code in the line at the bottom next to the caret, and press ENTER:

  document.title="Magic!";
  

  If you opt for a script written for it, you can try the forum calls on userscripts. org:

  Ideas and script requests - Userscripts.org

  Although some people are proposing small payments, that is not usually necessary to motivate people to help.

  Let me give you a brief warning on this site, however: last year, many popular scripts have been duplicated and reposted extra code that hijacks your Facebook account. Be careful when installing scripts, check the comments, make sure that there is no reference to Facebook.

• Performance degradation when the increase of the queues in the same queue space

  Hello
  
  We run Tuxedo 8.1, 32-bit with patch level 258 in our windows Server 2003 based production environment.
  
  We had to add a few more lines (about 10) in our current premises of the queue. However, what we have noticed is that there is a degradation in rate messages. It takes about 10% longer to enqueue a message and process messages that before these new lines have been introduced (despite the place is not the case for the majority of these new queues).
  
  How can we improve this performance in a tuxedo?
  
  Kind regards
  Asim

  Hey Asim,

  How important is this degradation? I can imagine a very small amount simply by adding additional lines, but I think it would be quite negligible. If the server TMQUEUE is simply more busy, because there are several queues, so more queue/wait operations. If this is the case, you can run several servers TMQUEUE to increase the flow of the queue space.

  Kind regards
  Todd little
  Chief Architect of Oracle Tuxedo

• M127fw MFP: How to delete the print jobs in the queue?

  When I get an error message when trying to print, I keep trying to print.  This means that I can hit 'print' five times for the same document, because I hit 'print' whenever I think I might finally have something fixed.

  The problem is that HP never forget any of these applications - when it finally starts printing - it always prints every single job - meaning that I get multiple copies of jobs for which I got an error message.

  Where is the interface to view and delete these jobs? I can't find it on the printer itself.  Is there an interface where I can delete jobs in the queue?

  Go to devices and printers and double click on the printer icon. Now click on something like seeing what is printing a list of documents should appear and you can pass by and remove whatever ones you want.

• Size of the queue for Signal form write XNET

  Hello

  I am using the XNET library to play a preset on an output signal waveform. I work with LabVIEW 2014 SP1, 14.5 XNET on a W7 Pro 32-bit operating system. I use an NI PCI-8512 map. This is my first app using the xnet library.

  In my test application, I give the user the ability to set the waveform to play. The total duration and the sampling frequency can be set. The output MAY report is cyclical, with a cycle time of 0.01 s (10 Hz). I chose to use the same frequency for example my wave form and writing of the CAN.

  I have difficulty working with the size of the queue. In this example, it's good but I did not really why. I tested different values in the size of the queue and 100000 seems to be good up to 60 seconds. But for the longest (about 5 minutes), this method is not good...

  

  What is the right way to work in this mode and how use efficiently the property size queue? Information and example of using software and hardware OR XNET are not very convincing...

  Thank you in advance!

  You can add several items at the end of the queue until the queue is empty.  So if you want to write 10,000 points, and your buffer is only 1000 points, then wait and monitor the number of messages remaining in the buffer, and once it is less than 100 say adds an another 900.

  I used this method for flashing on CAN and LIN.  I needed a way to watch specific at specified times images, and a single point of frame link would not repeat (which could write the same byte twice what would be bad) I could have made the rivers and used avoiding, but a better solution was to use queue and add more pictures at the end of the queue to try to keep it as complete as possible.

• Buffer could replace the queue in the design of producer/consumer model

  Hello

  I have a question to which the task of buffer to store the data and the queue is also of the same thing so we could use the inplace queue buffer in a design of producer/consumer model.

  No, these examples of buffer not almost equal to a queue, and never "replaces" queue at the producer/consumer.

  The advantage the most important of the queues for the producers/consumers (which none of the other mechanics buffer sharing), it is that it works activities to warn the reader that the data is available. So if you would simply replace the queue by mechanics of tampon too developed that you have attached to your last post, you will lose a large part of the object using producer/consumer.

  Thus, to compare the two mechanics:

  -Tail works activities, while the example of the buffer is not.

  -Tail must allocate memory during execution if several items are written in that corresponding queue. This also applies to the buffer (must be resized).

  -Given that the buffer is actually simply a table with overhead, memory management becomes slow and messy with the increase in fragmentation of memory. Queues to play much better here (but have their limitations, there also).

  -Overload of the buffer (the table manipulation) must be implemented manually. The queue functions encapsulate all the necessary features that you will need. So the queues have a simple API, while the buffer is not.

  -Given that the buffer is simply a table, you will have a hard time sharing the content in two parallel running loops. You will need to implement an additional charge using data value references to manage the buffer or lose a lot of memory using mechanics as variables. Lose the memory, you will probably encounter racing conditions so don't think not even on this subject.

  This led to four '+' for the queue and only a single point where 'buffer' is equal to the queue.

  Hopefully, this clears things up a bit.

  Norbert

• What is a good way to use the queues for the model of consumers/producers?

  Hi all

  I am following the model of consumers/producers to use the queue to synchronize the following process: the producer is a loop to produce a number N, I will put each number generated in a table and after each 5 numbers generated, I put the table in the queue and pass it on to the consumer. I have to wait the use by consumers of the data and it will then remove the item from queue so that producers will have the chance to produce another 5 numbers. As I put the maximum size of the queue one, I expect that the producer and the consumer turns to produce / consume all five numbers and the opportunity to another. Here is my code

  

  When the checkbox is false, the code will be

  

  For the first 5 numbers, product will generate every thing right and put it in the table, and it's going to pass the array to the quere so that the consumer will have the chance to loop through the table. I except the procude loop will continue only when the queue is available (i.e. all items are deleted), but it seems that once the consumer starts the loop loop of the product will continue (if the indicator x + 1 and x 2 will be changed to numbers). But this isn't what I want, I know there must be something wrong, but I can't say it is.

  dragondriver wrote:

  As you say in 1, sequency structure to enforce the order of execution, that's why I put it here, in this example, the simple question, I replace the complete code with increase in the number, in the real case, the first markers + 1 and + 2 must be performed in this order.

  Mikeporter says:
  1. get rid of all the structures of the sequence. None of them are nothing but apply a work order which would have been the same without them.

  So even if you delete the sequence structure, there will be a fixed & defined order and it is because LabVIEW follows the MODEL of FLOW OF DATA.

  Data flow model (more precisely in the context of LabVIEW): a block diagram node runs when it receives the required inputs. When a node is running, it produces output data and transmits data to the next node in the path of the data stream. The flow of data on the nodes determines the order of execution of the VIs and functions on the block diagram (click here for reference).

  Now in your code, just remove the sequence structure will not make you order will be going to stay the same, but you need to do some very minor changes (as thread of the error in loop, before that he go to the node "Élément Dequeue").

  Come to the main point: it's a good way to use the queue for the consumer/pmodel that?
  The model you are using (and qualifying as consumer/pmodel) is much too deviated from the original consumer/pmodel which model.

  dragondriver wrote:

  For the second, Yes, it's my fault for delete, though. I'm actually the example of model of producer/consumer design pattern, but I do not pay attention to the while loop in the part of the consumer.

  While loops (two producers & consumers) are the essential part of this architecture and cannot be deleted. You can start your code using standard model.

• What is the best way to adjust the brightness in multiple files using elements 13?

  I have about 100 JPEGs that I need to cheer up.  I need to adjust the brightness in "100" on each; is there a quick way?  "Treat multiple files" does not...

  Thank you!

  john_oc wrote:

  I have about 100 JPEGs that I need to cheer up.  I need to adjust the brightness in "100" on each; is there a quick way?  "Treat multiple files" does not...

  Thank you!

  Simple and powerful: use the ACR (Camera raw).

  Depending on the power and the amount of RAM on your computer, you can now open and edit multiple files at the same time in the ACR module.
  Use the menu file/open in camera raw.

  Select a batch of files (say 20 to begin by)

  Select all the files in the camera roll on the left.

  When they are highlighted, you will notice that the ACR module shows its AutoCorrect settings. Generally the brightness of your images will already be improved.

  The changes you apply to the sliders will change all the images highlighted.

  Take advantage of the opportunity to refine all the other sliders made highlights/shadows, clarity, vibrance, sharpening or noise reduction...

  Tip:

  What you do in the ACR module do not alter the original jpeg pixels. Only the parameters are saved, which is called parametric edition. So after this editing session, when you save the changes ('Done' button), you are able to reopen the jpeg (it will open automatically in ACR, even from the Organizer). You will be able to start editing with either:

  1 - the values of the original jpeg (turn all the sliders to zero, auto or custom in the right panel).

  2 - the AutoCorrect default CAB
  3 - your latest changes (settings file)
  4 - the session settings of most recent edition (which is useful to apply to several image consecutively).

  These settings are saved in the jpeg metadata section. No need to create a version set at this stage.

  Important: even if you are happy with the automatic settings default to ACR, apply a little change of your choice so that the settings are saved in the metadata section when you click on 'Done '.

  You have now edited your first batch. If you use the orgnizer, you might want to "update thumbnails', which show the improvement of brightness in thumbnails. You are ready to make the necessary changes to individual files, such as cropping or sharpening in ACR. Instead of clicking "Done", you can click on 'Open' to open the file in the Editor (you can change in 8 or 16-bit). You must go into the editor to apply other changes as layers, local adjustments. you use the editor to register in any other format file or print.

  For the next batch, the mounting parameters are available in the dropdown to the right (previous conversion). Open files, highlight all, select previous conversion, click 'Done '. Wait for the settings to be saved in jpeg files.

  In a situation where you have 100 files JPEG, the workflow that the above is by far the fastest and most flexible you can use. Imagine you have a white balance bad setting of your camera, you can imagine the time you need by editing individual files in the editor?