Apply the changes

Similar Questions

• Lightroom will not apply the changes to all my pictures until the preview icon is visible in the active window in grid mode

  Hello

  I have about 4000 photos taken with my GoPro I would use a Time lapse video.

  I decided to correct the colors first, so I imported it in LightRoom. I have made changes to the first image, selected images (ctrl + a) and click on the sync button.

  Now, the weird thing is that I made to the first image doesn't apply to the rest of the images if I display of the thumbnail in the library grid mode view.

  For example, I will scroll to a random part of the grid of images and preview images show the original image. After a few seconds, the previews will be all up to date with changes made to the first image.

  Even tried exporting as tab video slide show to see if the changes have been made to all photos, but that reflects not only the icons - no dice. Any input would be much appreciated!

  Thank you!

  I think it is a bug specific to slide show > video Export.  I tested with 5800 1000 x 750 in double JPEG format, change the exposure of the first to be very dark and synchronization so that change to all others.  When I exported all 5800 photos in a folder, they all had the exhibition has changed; Ditto when I did slide show > export as PDF.  But when I did slide show > export video, I observed the same symptoms that you have done: only those photos that I had actually seen thumbnails in library obtained grid view the correct exposure setting in the video.

  I recommend that report you this bug in the official Adobe feedback forum, where Adobe has asked that all the deferred bugs: Active recently in Photoshop on Photoshop Lightroom family.  Don't forget to include a detailed step by step recipe to reproduce the bug.  Adobe tends to not pay attention to the reports for which they are unable to reproduce the symptoms quickly.

• Apply the change to the appearance of simple page Source Formatting.

  I have the next page where the text boxes line up fine.

  Test of Dreamweaver

  If I apply Source Formatting to the page it is no longer aligned as shown below.

  Dreamweaver Test2

  Apply Source format inserts a few spaces between the < /li > < br > and. These areas are the origin of the problem. I can remove them manually and the text boxes line up again.

  Under preferences - Format of Code - dash I can remove the check mark and then the format of Source apply not indented and it does not change the appearance of the page. However, who did not renfonçait code hard to read, if this isn't a good solution.

  I would like to be able to use apply the formatting Source but I need this fixed number.

  Any suggestions?

  The only valid child element of a

  is a
.

Change of display: block and remove the


• BI Publisher, what should I do if I want to when I apply the change on one report, it will be automatically applied to all reports

  Hello everyone

  I'm about to a comprehensive set of reports, the number is around 200 reports.

  I have this question or concern, which is "If the client after the construction of all the reports changed his mind and wanted to change the logo or small change."

  How can I do if I want to, when I make a change, it will be applied on all the reports?

  for example when I want to change the logo I don't have to go edit one by one, just once on the parent or master report and this change will be applied to all the reports

  Thanks for the tips

  Use the template of sub for your header or footer.  Create your report without header/footer, then call the sup of it model.

• Can I save / apply the changes to a RAW image?

  I made changes to a picture in a series than any need, more or less, same changes. Is it possible to save the settings to an image and apply them to another image? How this is done?

  TIA,

  Ken

  LR3 / Macbook Pro / Canon RAW camera image

  He the LR Mac is like Windows, it's a thing with a single click. A dialog box opens with all available parameters, and those that you have enabled checked: you are then asked if you want to copy all of them.

  Click 'Yes', job done.

• I can't apply the changes

  Hello
  When I try and click on apply changes on a page of the apex (in Design view) my web session bombs.
  
  Cannot display Web page
  
  Anyone have any idea why?
  
  Thanks in advance

  Well, you are using an older version of the APEX for a start - even if your have a wide passage to 4.0, you should really use 3.2.1.

  It seems that something is not installed properly, most likely the webserver side DB, but I cannot be sure without being there. I suggest you start by talking to your DBA...

  See you soon

  Ben

• Apply the change of power for all users

  Is there a way to change a system to XP for all THE present and future users on PC Windows XP sp2? It is in a domain environment, but I have not met all GPO settings that would allow it to be. And users are not technically aware of how to make these changes on their own. Basically, I just need to show up or off in standby mode.

  Any ideas are appreciated

  Hi Berlan,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet forum. Please ask your question in the Forums in TechNet Windows Server.

• CSS does not apply the changes to Div

  I have a div in a wrapper that I want to be roughly a third of the width of the envelope. When I change the width of the div, nothing happens. I noticed that when I click on the div, it evokes the CSS for the wrapper, almost as if Dreamweaver does not see the CSS for the div The code is below. Thank you.

  HTML:

  < div class = "content3" id = "content4" > < h3 style = "color: #E75355" > benefits < / h3 >

  < div class = "advantage1" >

  Quality

  < p > Morris & Steele are extremely proud of the quality of manufacturing that we provide, which separates us from the competition. Our professional approach to design and construction, as well as our dynamic ideas, ensures that clients are safe and satisfied. We guarantee superior construction and finishes that will give you the best return on your investment. < /p > < / div >

  < div class = "advantage1" > < / div >

  < div class = "advantage1" > < / div >

  < div class = "advantage1" > < / div >

  < div class = "advantage1" > < / div >

  < div class = "advantage1" > < / div >

  < / div >

  CSS:

  {.content3}

  Width: 48%;

  top of the margin: 2%;

  font-size: 140%;

  do-family: «Sansation regular»;

  Clear: right;

  text-align: center;

  line-height: 1.5em;

  margin left: 2%;

  float: left;

  }

  {.advantage1}

  float: left;

  Clear: right;

  Width: 30%;

  }

  You code working properly here, I see a global container, our advantage as a header and 3 columns of width containers 30% that don't fill quite across the width of the parent.

  This leads me to believe that you probably have a problem elsewhere on the page that is choking on, or some DW css later in your style sheet which is crushing your settings.

  Check your page against the validator Of the W3C Markup Validation Service and The Service of Validation CSS W3C and clear all errors that they show. If the problem persists after you have cleaned the code, post back with a link to your current page, so we can take a look at all of the code.

• How to POP up dialog confirmation of the changes during CREATION / APPLY CHAGES

  Hello
  
  By default as Oracle APEX, when we click on CREATE (insert new record) / APPLY CHANGES (updated existing record to date), he performs all validations and then COMMIT the record in the database. I need to know if the following is possible or not.
  
  1 when we either click CREATE or APPLY the CHANGES, and if any validation succeeds, he should ask me a dialog box (the same as in case of DELETION, we have), saying: If we want to confirm the changes, press user Yes... He then saves / validate the files and if the user presses NO, then he returned to the same page without any validation.
  
  2. can we have something like, if the user press CREATE or APPLY CHANGES, we will have a new page with all the details/columns to form fields and on this page, we will have CONFIRMATION of the CHANGES button, when we press makes it real, if NOT validating the back to previous editing page.
  
  
  Thank you
  Deepak

  Hi Deepak,

  If you go at the bottom of this page, you should see a link to download the entire application - there is nothing else in the application with the exception of these two pages.

  The idea is that, on the page of the form (page 2), I have a hidden page element called P2_MODE. This is the value E (edit mode) by default using a calculation. The regular buttons to create and apply the changes have been moved to the top of the page in a region that depends on the P2_MODE being S (for Save Mode). A new button Save added (conditional on P2_MODE be E). The normal process of "Fetch line...". "was subordinated to P2_MODE being E so that it can retrieve data. The normal process of the "line of process...". "was subordinated to P2_MODE being S so that it can record data. Save the new button should trigger the validation. As long as it goes, the shipment takes place, but the process of "process line...". "don't hit at this stage. The industry triggered by Save redirects to page 2 and assigns to P2_MODE S. The original buttons become visible so that the data can be saved, but the page elements are now read only (conditional on P2_MODE being S) so that the user can change them at this stage. Finally, all elements of the page are defined with a Source of 'Only when the current value in session state is zero' and I have a data reset process affecting these elements themselves when the page is reloaded with P2_MODE be S.

  At all times when branching to or from page 2, the cache for the page 2 is deleted - this is necessary due to the use of "only when...". »

  I've tested this just as I ran out of time last night. But, hopefully, the principles might work for you.

  Andy

• Great Multiplot XY graph very slow to update the changes in the line of visibility/colour/width

  Hi all

  I have a problem that is interesting for you all. I'm trying to update the features of large graph XY (3600 points given for each of the 160 different storylines, all on a graph) by reference and it goes very slowly.

  What I've implemented is a system where mousing over other indicators and buttons "will highlight" certain groups of plots by intrigues a thickness of 2 instead of 1. Similarly, clicking on other buttons will change the color of the plot or toggle the visibility of certain parcels. This implementation, I have a Subvi, which contains a reference to the xy graph, and in a loop for each parcel of land for active, applies the changes I want to see done. The problem is that it takes more than a minute to fill in for an update! I'm supposed to be traced new points of every second, and mouseovers and button clicks may occur several times in a second, so it is obviously unacceptable.

  I noticed that as I'm a loop in all plots of 160 in the Subvi, the XY graph is updated, one plot at a time. My question is: is it possible to prevent the update until all changes have been made in the chart? Or maybe a way to apply all the changes at the same time, rather than use a loop for?

  I discovered that if I simply drag a property node graph xy HUGE and all at once instead of make a loop for, the changes appear immediately as you wish. Is it really what I have to do to get the results I want? It is incredibly long and unmanageable to have a node gigantic property will be all the steps of the loop being applied at the time.

  Help is greatly appreciated!

  -Aaron

  Two things you should consider:

  (1) reporter Panel updates.  The value True before the loop and false afterwards.  Considerably from the things speeds as this place.

  (2) no way you can see 3600 points on a graph.  With this number of plots, I would consider the decimation of the data in order to reduce the number of items displayed.

  

• F0169 (host name ESXi) service profile could not apply the configuration

  I just created a new vNIC on 2 of my new hosts. I created the pools MAC address before you start. As I create the vNIC I got the following error:

  Your changes:

  Created VNIC FTNNIC

  Create: network fault tolerance

  Fail the Configuration of:

  Profile service (ESXi host name) org-root-[(Server:sys/chassis-2/blade-8)]

  Failure reason: connection-investment

  There are not enough global resources

  Not enough available vNIC

  Are you sure you want to apply the changes?

  I click Yes, and then get F0168 error service profile could not apply the configuration?

  What I do wrong here and how to fix it?

  Can you please more information, for example

  -What type of Blade model, input-output adapter

  -Version UCS

  -ESXi version

• How to merge the changes made to the same analysis?

  Hello

  I have an analysis and there are two issues raised against it, in a real environment.

  In development, the problems starts at the same time. However, only the first resolution should be tested. Assuming that the first problem is solved, how can I "apply" the changes made to the second issue fixed / fixed?

  What are the means and best practices in this situation? OBIEE version is 11.1.1.7.0.

  Thank you.

  Kind regards

  Maury.

  You can use a text editor such as Notepad ++ and the plugin in comparison to compare the XML from the analyses and differences in merger.  That would be the fastest easy/more...

  Just a word of warning - this is completely not supported by Oracle and can VERY easily lead to a corrupted analysis. You'll find plenty of OBIEE'ers experienced out there who have hacked the XML on analysis, but you have also messed up in the process. Always make sure you have a backup and Don ' t cry about it if it breaks.

  To the OP - I don't think that there is a good answer to this problem. The analyses are simple objects, there is no option of merger for them.

• How can I see the changes made to a document in Acrobat Pro ms?

  I have a trial version of Acrobat Pro DC and do a proofreading job that requires changes to be seen, but they are not at the present time. My question is: can one consider? If so, how? And if not, what program with a free trial can use to do? Thank you.

  The correct workflow would be to add comments in the PDF and then send it to the authors. They then apply the changes to the original file format and generate a new PDF when finished.

• How to apply the physical database design

  I imported the tables in my physical database and made some design changes. Now how can I apply the changes to my physical database?
  
  On the Tools menu, patterns for comparison/merging of views can make the comparison between registered design but no physical database?
  
  Published by: 871744 on April 10, 2012 20:31

  In the right part of the main toolbar, there are two blue arrows for synchronization to/from the data dictionary.

• Consolidation of the changes in the structure of the Group

  When an entity A sells entity B to the C entity in may, the C entity must consolidate the P & L of B of the time of acquisition (May). Also should consolidate A P & L of B until the time of the sale. HFM is set to org by period and uses Active / not active in the management of the property (also tried PCON = 0% / 100%). Consolidation is based on the values of the CDA. When I consolidate can P & L for B er 0 for A, because CDA can is zero. For C P & L for January - may of ter are consolidated in May. This is not correct, but how could I implement the correct application to fix this?
  
  Published by: user10938694 on November 27, 2009 08:24

  So that the HFM manage cases of mid-year acquisitions and disposals, you must clear the ConsolidateYTD flag. If I say that this change should not affect the application in other respects, this statement does not guarantee success. This is why your concerns about the negative effects this change might have are fair. Examine the copy of the application in a test environment, and then test the modified version before applying the changes to production. The existence of a development/test in parallel to the production environment is still a practice that should not be overlooked.