How to apply the physical database design

Similar Questions

• How to apply the physical design

  Dear all,

  I use Apex 5.0 and I downloaded materials from this URL: https://github.com/vincentmorneau/material-apex

  But I don't know how to put the css and js files.

  Best regards

  Hi OraDev,

  Now, if you are creating a new application with the theme of hardware design you will get ugly page without css and js:

  

  So, where are the css and js for the theme "design material". The answer is that they are in shared components-> static files request for application of the 'APEX material':

  

  Go to "Hardware APEX" application->-> static files of the Application, shared components, and then click 'download as Zip '.

  Go to your theme of created/switched demand to "101. Hardware design'->-> static files of the Application, the shared components and download the above downloaded zip file as follows (keep the flag file unzip it as 'Yes'):

  

  If you recharge now, your always the theme of hardware design application is not loaded. The reason is the css/js references in the theme. You can consult the following references If you go in the app-> shared-> themes components-> change theme "Physical design" then you find next references css/js:

  

  Now, what is this "& PATH.". The answer is the chain of Substitution defined in the application. You will find this substitution string defined in application of the 'APEX material"->-> Application definition attributes, components that are shared-> section of Substitutions as follows:

  

  Set the substitution string 'PATH' in your application (even as an application "APEX material"). Now reload the application page! You will find the theme of responsible hardware design.

  

  After the application of the "APEX material" in my workspace on apex.oracle.com: https://apex.oracle.com/pls/apex/f?p=45241:1

  Here is the 'Hardware Design Demo' application I built with above mentioned changes: https://apex.oracle.com/pls/apex/f?p=62930:1

  NOTE: Ideally, you should deploy the theme css/js/images on the webserver instead of load to the shared application components. Css/js/images loading depend on the web server you are using. After loading this web server, you need to change references in the theme of the workspace accordingly. So, you don't have to download the theme css/js/images whenever you create a new application with the theme of the hardware design or spend you your theme from application to the theme of the hardware design.

  I hope this helps!

  Kind regards

  Kiran

• How to apply the classic filter Design Express VI

  I use the digital classic filter Design VI design a bandpass filter (try to follow this example http://www.ni.com/white-paper/4460/en/), but then I can't locate

  Filter Express VI to use the filter

  

  The express VI filter comes with the LabVIEW base development system. It is found in the range of functions under Express > Signal Analysis > filter. Have you checked here?

• How to apply the theme of Oracle Alta UI in ADF

  Hi all

  I use Jdeveloper 11.1.1.1.7.2 release1.

  Can anyone provide your inputs on how to apply the theme of Oracle Alta UI in the ADF.

  For any consultation on Alta IU @ http://www.oracle.com/webfolder/ux/middleware/alta/start-develop.html

  Thank you and best regards,

  Miko Auntie.

  http://www.Oracle.com/WebFolder/UX/middleware/Alta/start-develop.html

  http://www.Oracle.com/WebFolder/UX/middleware/Alta/patterns/PageDesign.html

  http://www.Oracle.com/WebFolder/UX/middleware/Alta/new-dev-w-Alta-skin.html

  Oracle ADF: Customized design

• How to get the physical credit iTunes gift card?

  How to get the physical gift card iTunes on your iTunes store account balance?

  • You cannot buy an iTunes gift with in-store credit.

  See the link below to buy physical gift cards for iTunes.

  http://www.Apple.com/shop/gift-cards

• How to apply the "Slate Pro Light" using CSS font?

  Hello

  Could you tell me how to apply the font of "Slate Pro Light" using CSS? I have not found a solution for the 'Light' slate Pro variation selection.

  Thank you.

  I usually use the definition of CSS of police-family at the following address on my html and body elements:

  font-family: "Slate Pro", Slate, "Myriad Pro", "BBAlpha Sans", Helvetica;
  

  Potentially adding "slate Pro Light" should do the trick. Alternatively, you could take advantage of the make-weight property when you need a lighter framework:

  font-weight: normal|bold|bolder|lighter|number|initial|inherit;
  

  In this case, lighter, might do the trick?
  

• How to delete the old database?

  Hello

  I work with a SQLite database. However, I am getting intermittent behaviour of my app in the Simulator. I suspect it's because while developing, I have to go hard the Simulator and leave the database in an unknown state.

  How clear/clear the old database I know I start the application of a known state? I tried to use clean.bat, but I have not had success with it yet.

  Thank you

  My apologies - shnuffy had right the first time. I have now found the directory where the database is stored. As shnuffy says: device/Blackberry/system/appdata/rim/webstorage /...

• How to distinguish the physical interface and logic (subinterface) interface to the Cisco router/Switch?

  Hi Expert,

  How to distinguish the physical interface and logic (subinterface) interface to the Cisco router/Switch? Can you please clarify a formal way for this so have?

  A physical interface is numbered with the same name of the interface when printing on the physical port. For example "GigabitEthernet 0/1" corresponds to port 1 of the 0 module (or the base unit).

  A logical interface can be a subinterface on a routed port and will have a point ("". "") preceding the number sous-interface (ex. GigabitEthernet 0/1.1). It can also be a loop or a virtual interface (on a router this could also include interfaces like the tunnel and virtual tunnel or VTI types). A switch may also have a VLAN logical interfaces (e.g. interface vlan 1) which are used as layer 3 virtual interfaces of type.

• How to apply the strategy of UCS1.4 collection (1 d)

  Hi all

  I try to collect statistics on the performance of the network. but do not know how to apply the policy to the collection.

  Service profile, I cam see political Stats. But within the political framework of Stats, there are onlu available in config/choice is political threshold.

  Can someone help out me? Thank you very much!

  I think this is what you are looking for?
  
  UCS stores the past 5 statistics records at the "Reporting Interval" setting;
  
  There is no configuration to change that number.  You can put this interval out 8 hours but then you only get a snapshot every 8 hours. Trending or history retrieval would require an interval based extraction and storing application that utilizes the UCS XML API.
  This is a link to the UCS XML API information.
  
  http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/api/ucs_api_book.html
  
  

• How to get the physical size of the screen?

  Hi all

  How to get the physical width and height of the screen (not resolution) in inches or in centimeters?

  Is there a method to do

  Thank you very much

  Display.getWidth () and Display.getHeight () you will get the number of pixels.

  Display.getHorizontalResolution (); and Display.getVerticalResolution () to get the pixels per meter.  Then by dividing appropriately you can find the actual size.

• How to use the trial to design adobe? I was successful to install adobe download wizard

  How to use the trial to design adobe? I was successful to install adobe download wizard

  Once Adobe Download Assistant is installed, you can start at any time and choose a product to download at the bottom of the window. Updates list as new products will be available for download with Adobe Download Assistant.

  Please visit: http://helpx.adobe.com/x-productkb/policy-pricing/download-assistant-faq.html#main_How_do _ I_download_a_trial_version_of_Creative_Suite_or_Elements_software_

• How to apply the filter to a specific column condition, but not to the report?

  Hello
  
  I'm having a problem in the application of a filter to one of the column condition.
  I have a scheme with the table around 10 dimension tables and a fact. My requirement is to provide a count on the table of facts with associated with some other columns in the dimension tables.
  
  Lets consider a scenario with tables as sales (Fact), region (Dimension), Year (Dimension), Type of sale (Dimension).
  
  Now my requirement is to highlight the fields
  
  City (Region) - city
  Year-
  Sales Count (dirty table) - number of all sales of the fact table
  Sales Count (dirty table) - count of all sales of the fact which type of sale table is 'Cash'
  
  Here, my question is how to apply the filter condition of Sales Type = 'MONEY in' only on one of the Sales Count column that comes from the fact table. I want to be ordered for the fourth column, the filter condition.
  
  Can someone let me know how?
  
  Thank you

  You must do this:

  1) click the button column fx sales. (This procedure does than on fact, not attributes.0

  2) click on the filter button.

  (3) select the size of sales from the left Type "selection list."

  (4) in the filter window, enter CASH, and click OK.

  This will create one filter on sales 'use' size 'type sales' as the filter. It willl filter only to this column.

• How to apply the mass PhysX to a w3d created with max

  Hell,

  I need to figure out how I can do to apply e.g. "mass" or "restitution" to some body created with 3d max and imported in Director w3d format.

  I know how to apply 'transform.position', 'transform.rotation' to a w3d created with max.
  and how to apply the mass and the return of an object that is created with lingo, but I do not know how to do mass a w3d created with max.
  Who is the syntax?

  Can you give me a hint?
  Thank you.

  It works for me :-)

  I sent you a private message.

• How to apply the gradient to the entire page

  Hello

  Can someone tell me please how to apply the gradient to the entire page as a gradient background color.

  I tried for centuries and can not see the routes to apply background color

  any ideas? step by step please I really get lost because I'm new to Indesign and do not know the names of all the tools.

  Thank you

  If you want to this gradient to print (or export) with the page, and then you have to draw a rectangle and fill with the gradient.

  If you want on a number of pages, put the rectangle on a master page. You might want to add a layer and move it to the back, put the rectangle on that layer, then lock the layer.

  Dave

• How to mark the physical tables as "cacheable"

  Hi all
  
  Can someone tell me please how to mark the physical tables as "cacheable".
  
  Thnaks a lot

  You can make cacheable table by clicking twice on the table or go to the properties of the table. You can designate specific time duration for the year, month, days need to keep cacheable. Remember do this on the base tables will affect all alias tables.

  Thank you
  Amol