Approve automatic attendance records

Similar Questions

• How to find if an invoice to the AP is approved automatically or manually?

  Hello

  I have a question about invoices in Payables.

  How know if an invoice is approved manually or automatically, is approved?

  Like, for example, a company, all less than $ 50 bills can be approved without the consent of the Manager. These invoices can be automatically approved. But all these bills over $ 50 must be approved by the Manager.

  Do we not have this kind of scenario? If so, how do we identify them in oracle tables. What table and column that specify this source.

  Thank you

  Hello

  You can find it by referring to the WFAPPROVAL_STATUS column in the AP_INVOICES_ALL table.

  If your workflow design is not not approve invoices less than $ 50,
  then the approval status of invoices less than $ 50 would be the value in WFAPPROVAL_STATUS as '' NOT NECESSARY ''.

  If your design workflow is to approve the Bills above $ 50
  then the approval status of the Bills above $ 50 would be the value in WFAPPROVAL_STATUS as 'WFAPPROVED '.

  Apart from the above, there are several other statuses available for invoice approval such as,.

  REQUIRED approval is required for a Bill, but no authorization is launched
  INSIDER = approval is required for a Bill, and approval is launched
  REJECTED = approval is required for a Bill, and the approver rejects the approval
  MANUAL APPROVED approval is required for a Bill, but with approval of Force the invoice has been approved

  Kind regards
  Ivruksha

• Automatic message record.

  Is there a way that the unit can automatically save a message when played at a Subscriber without user interaction. I've got some submarines that say that they save or delete messages on their old VM system to stop the MWI remaining lit.

  If so this can be defined on a basis per subscriber? Personally I do not like systems that backup automatic (and so turn off the MWI).

  anyway.

  See you soon,.

  NJ.

  No - currently an action is not required if the message is already played - you can eitehr save it (light turns off), remove it (of course lamp turns off) or mark new (stays lit lamp). But there is no "hands-free option that will just go to the next message the marking as read this mssage.

• How can I stop my computer automatically after recording a show.

  Original title: Windows Media

  If you are planning a show on the record, that I know that the computer will start up from hibernation, but is it possible to close it after the show is over. I go to bed and do not want to run allnite

  Thank you

  Check the settings here: -.

  Power options > change plan settings > change advanced power settings > media settings >

  Alternatively, you can try: -.

  MC7 Sleep function

  http://thegreenbutton.com/forums/t/79019.aspx

  S.Sengupta Media Center MVP

• Automatically approve the OPS?

  Hello
  
  ex: we have blanket purchase agreement and now is release, we implemented rule of sourcing and every thing... .i want to make every thing automatically?
  means that I don't want to approve any doc... I want to put as
  (1) when min max, planning the first PO requisition approval aautomatically is it possible, where is implemented?
  (2) once the request is approved, purchase order must approve automatically is it possible? What is put in place?
  
  Thank you

  (1) Yes. Make sure INV: Minmax reorganize approval is set to pre-approved.
  (2) Yes. Do you this through a feature called auto supply. Check http://www.oracleug.com/user-guide/purchasing-overview/setting-automatic-sourcing
  Configure you ASL and ASL attributes, make sure release method was released automatic. See http://download.oracle.com/docs/cd/A60725_05/html/comnls/us/po/autorel.htm for more details.

  Hope that answers your question
  Sandeep Gandhi
  Techno-Functional consultant

• A58 Sony stops video recording about 22-23 minutes

  Hello!

  A few years ago, I bought a camera Sony A58. So far I used it for photos and videos of 5 minutes and it works very, very well!

  Unfortunately, I tried to save a 1-hour concert for a long time. I put the MP4 camera, charged the battery to 100% and inserted an empty 8 GB SD card. To my surprise, the camera recorded only 22 minutes! I decided to test this at home, so I recorded another video and he stopped at 23 minutes. I finally could see the moment he ceases to register. It just shows "Recording"... "then stops. Why a $500 camera to record videos? How Sony that I spend more money on their products, if a premium camera cannot record long videos?

  Please help me with this because it is very frustrating.

  Thank you, have a nice day

  Yes, the video cameras record for as long as you want, as long as you have the space card and battery (or if connect you to a power supply, then the space of the card is the limit)

  Generally, video files are divided into different folders to 4 GB - video recordings still smooth, just use video editing software to put them all together in one room.

  The reason for this is the FAT32 format, which is a format standard and very common, and it imposes a 4 GB file size limit, to my knowledge.

  Who knows, maybe Sony or another brand has a video camera using a different format that can allow recording 1 continuous file.

  So, back to the legal limit, if something saves more than 30 minutes, it is considered as a video camera, so established as one, which is a tax on the big (in Europe at least)
  If Sony made 2 separate versions, of course, not everyone will want to buy the one that is available in the EU, so to do even in the world, it's just a limit standard that all manufacturers.

  Now, about why you get only 22-23 minutes, there could be a few reasons:

  Heat - when it's hot, it will automatically stop recording to cool. This is probably not the problem since you have the a58 which should not warm up easily, and so you're conform to 22-23 minutes.

  Space memory card - if you run lack of space, then cut short. However, even once, I guess you have a lot of space and your records are compliant, if not the case.

  My last case is FAT32 format which is a use of manufacturers of standard format. I'm guessing that you save to a maximum quality, which means that it will hit the barrier of 4 GB faster, thus interrupting the short recording time.
  I could be wrong, but just a guess.

• Complete recording of calls to agents in UCCX

  Hello team UCCX,

  Hi, looking at the RND for UCCX, I stumbled on the following. My client is looking for default logging for all agents in a contact call center. The following description seems to provide that. Can you please provide information on the concurrent sessions? This contact center will be 55 agents and all need simultaneous registration.

  is this the information GI research below:

  "Finish the recording of calls. CAD can be configured to start and stop recording the call answer and release automatically. Conditions which calls must be recorded are defined in a script of the application. There are limits to how many simultaneous call, recording sessions can be performed. »

  Hello

  Yes, it is possible - you basically configure the workflow in use by agents (i.e. probably the workflow 'Default' If this is new to you) so that there is a "Utility Action" of "Start Recording" when a call is "answers." This is configured in office administrator who is the server default UCCX isntalled.

  Someone has gone to the effort to make a how-to here: http://dreamforccie.wordpress.com/2010/03/30/automatic-call-recording-at-uccx/

  Concerning

  Aaron

  Please evaluate the useful messages...

• Automatically update the column in the table in OBIEE

  Hi people,
  
  I have a requirement to say I need to update a column of table based on a condition, but this update should happen on a daily basis (I mean that it would be held once per day) by checking if all the records in this column meets the condition then update
  
  example:-column = 'pending', then using the "approved". As records of transactions every day in the table lights. OBIEE should check and update the line so the next time it does not show this line as "pending".
  
  I thought of 2 approaches to this
  (1) through the write-back, it is possible to update but manually (the question is it can't be automated or on demand on daily basis and update multiple records on a go)
  (2) write a stored procedure or a function of update, but how can I perform this procedure either regular or run once daily.how to use it?
  
  Any thoughts on the above two points or any method you can think off the coast.
  
  Any help is appreciated!
  
  See you soon,.
  KK

  Murielle,

  This shud be easy...
  -Create a direct database... with the Update statement
  for example: Update table set col = "Approved" where col = 'pending '.
  -Create an ibot using the RFI above and plan on a daily basis.

  This will update the complete table with the new value on a daily basis based on the State

• Number nav to display records

  Hello;
  I've created a navigation numbered to make cycling in the DB records. When I created it, it was based on catagoryID. There are a number of categories, and this would put a navigation in the records like this:
  1. 2. 3. more > the Previuos Word would appear if you are entered in the records. The net asset value will also automatically if records grew, (more added)
  
  Now, I change things on this 'soft' I don't use categories, but simply want to scroll the setting records 10 records on the page at a time, and only using the DB ID records to scroll. I changed the code and it's the slightest mistake on me now. Here is the code I use:
  
  < cfset CurrentPage = GetFileFromPath (GetTemplatePath ()) >
  < cfparam name = default "PageNum_GetRecord" = "1" >
  "< cfquery NAME ="tracking"datasource =" "#sitedatasource #" username = "#siteUserID #" password = "#sitePassword #" >
  SELECT ID, REMOTE_ADDR, HTTP_USER_AGENT, TRACK_DATE
  FOLLOW-UP
  WHERE ID = #ID #.
  ORDER BY ID
  < / cfquery >
  
  < cfparam name = "StartRowOptional" default = "1" >
  < cfparam name = default "LignesMax" = "10" >
  < cfset numRows = tracking.recordCount >
  < cfif StartRowOptional gt numRows > < cfset StartRowOptional = Max(startRow-maxRows,10) > < / cfif >
  < cfset EndRowOptional = Min ((StartRowOptional + method - 10), Evaluate numRows) >
  
  < body >
  < cfoutput query = "tracking" STARTROWOPTIONAL = "" #StartRow # "LignesMax =" #maxRows #">"
  #all my output is here.
  < / cfoutput >
  < cfmodule
  "' model = '... / CFdocs/pageNav.cfm.
  totalItems = "" #numRows # ""
  numPerPage = "" #maxRows # ""
  StartRowOptional = "" #startRow # ""
  URL = "#CGI. SCRIPT_NAME #? ID = #ID # & StartRowOptional = #startRow #">"
  
  My error is:
  
  ID of the variable is undefined.
  
  
  The error occurred in C:\websites\108392zj7\admin\tracking.cfm: line 7
  
  5: < cfset CurrentPage = GetFileFromPath (GetTemplatePath ()) >
  6: < cfparam name = "PageNum_GetRecord" default = "1" >
  "7: < cfquery NAME ="tracking"datasource =" "#sitedatasource #" username = "#siteUserID #" password = "#sitePassword #" >
  8: SELECT ID, REMOTE_ADDR, HTTP_USER_AGENT, TRACK_DATE
  9: FOLLOW-UP
  
  
  Can someone help me understand what it is that I'm missing and why my ID is not présicer?
  
  Thank you
  
  Phoenix
  

  Hi Phoenix,

  I have 1 question.

  In your query

  SELECT ID, REMOTE_ADDR, HTTP_USER_AGENT, TRACK_DATE
  FOLLOW-UP
  WHERE ID = #ID #.

  The #ID # whence?

  You also say that 'it's the ID in the DB that is assigned for each record

  What is actually the #ID #?

  Everything is within a ... ?

  In this case, he explains why you get an error 'Variable ID is undefined' because in your code, nothing raises the #ID #.

  It is also a good practice to specify the scope of your variables for example, variables.ID, form.ID, url.ID, etc.

  I tried a similar example with Next, Previous links and it works fine.

  Here is the code below.

  I hope this helps.

  Kind regards
  Yogesh

• Cash flow with actuals backdated

  Hi all

  I use the cash flow module and want to display the monthly actual expenditure. Let's say that the period runs from September 2015 to 2016 Aug, he created 12 months in the horizontal axis of the graph of cash flow. I want to capture all the operations in the past for historical data. When I entered transaction of Ms 2015 a real BP spend real cash flow curve display automatically while recording as current expenses in the month, when registration is approved, which is Jan 2016. It be possible to do the readings of cash flow the operation happening in 2015 Sep? What piece of data is the Cash Flow read so he decides to spend real happened today?

  Thank you.

  Hi Edwin, depends on a little of your maximum set, but in general, your actual past BP should be configured as type of BP 'pass' and you then need to add a 'date' for the line items. The curve of cash flow will resume then the amounts and the effective dates of the line items.

  Search "help docs' 'curve (Spends) actual spending.

  Excerpt:

  Note: for the basic validations, the change is committed and payment request summary payment request SOV BPs type (curve curved families cash flow actual spending (or 'pass') of cash by the commitment):

  • If (uuu_effective_date) entered into force field has been defined in the design of long-form, then this date is used as the date for online encrypted items.
  • In the absence of the effective Date (uuu_effective_date) field, the end date of workflow will serve as cash flow.
  • You can see the amount encrypted for curves of real (Spends) cash flow type WBS level and summary WBS.
  • You can see the amount of the line item for the curves of real type (Spends) Project/Shell level cash flow.

• Print to video

  I'm trying to give a copy to my calendar published on my Canon HV20, but it will not record on my camera.  I use

  FireWire 800 that I used to capture earlier.  I'm going to print on video and check automatically start recording, press OK and

  then again to start recording.   The calendar will appear on my computer screen, but nothing happens on my camera

  who is on the mode of the camera.  I know that CTF is grateful to my camera because I went to Capture, and he began to

  record.  Any ideas?

  Another problem I had was that some of my Pacific countries and territories in a long slide show turn sideways for no reason.  I fixed it

  but it's a lot of trouble.  What would cause this?

  Thank you.

  <nothing happens on my camera that is set to camera mode>

  If the device is set in 'camera' mode "it behaves like a camera and will try to record through the lens.  Check the camera settings for line-in or IEEE1394 (aka Firewire or DV) input record.

  Moreover, there is no particular reason to record HDV footage to tape?

  -DH

• Problem with the Toshiba product registration after reinstall

  Hello
  I completely reinstalled my laptop.

  Now in the "begruesungscenter", sorry I don't know the English expression of the right and the notifications from Toshiba program says I ve to save my mobile on the Toshiba site.

  But I've already registered my laptop, is it possible to do it again? Or to change an entry in the registry, that the laptop is registered?

  Hello Stephan

  Sorry but described is not a problem and the subject of this thread is really bad. What you use is the recovery image. This recovery image is in fact the factory settings. It is a logic that begins each time after installation of operating own will be the same procedure.

  What you need to do is to interrupt the procedure of registration and complete the installation of the OS. If your laptop is already registered you must not do it again and again. I recommend to disable this automatic boot record (msconfig) or check if you can remove the system.

  Good bye

• Camileo H20 - a few questions and the new firmware?

  OK, many users know that it is one of the worst cameras, you can buy.

  Firmware is really sick, then, how to use it?

  To start, I'll repeat known bugs:
  -very slow development, so its impossible to zoom in/out
  -camera is not connector to plug in an external microphone
  -internal MIC is the gift of a hell, he died later, big bang.
  -Its hard to listen to the people, because internal microphone is sensitive as one of the worst last factory of China
  -light balance is crazy, the processor is switching mode light for fun in automatic mode
  -record is worse than much cheaper cameras and more, is probably preferable to buy an old camera from Sony again Toshiba

  I don't like Toshoba, because its my third bad product Toshiba.
  After good notebook Toshiba, I bought new a lot less good and the other and the camera. I think that production will only worse in 2005.

  Camileo H10 was also sick, but for this unit was out of usable software.

  Last year, I bought used Camileo H20 with part number PX1478E-1CAM on eBay and use it from time to time. I use it mostly to the outside because if there is no light in the room I m not so satisfied with the quality of the photo.
  Sound is not the best but not so bad, and in General, for this price the cam is OK.

  When I read the list of known bugs, the first thing I have to say is: you bought the bad cam.
  What you need is the cam of high quality and the price for this cam is around 700 Euros. I wish I had this cam too but I'll wait for prices to fall a little.

  Please note: Camileo H20 costs 140 Euros only. For that money, the cam is really OK.

  With laptops is the same: it depends on phone model. The quality for the Satellite C model is certainly not the same as that of the P of Satellite series. Best evidence is the price.

  In my country, we have a saying that applies: that cannot pick up the right product, must buy expensive. It is difficult to translate, but I think you know what I'm talking about m. ;)

• Tungsten E2 - HotSync stuck to the appointment.

  All the previous sessions of the hot sync were no problem.   HotSync full this time, but showed the synchronization of the Agenda has been abandoned.  All the data calendar on the desktop was lost.  I tried to sync again.  Then he got stuck on the agenda and would not continue.  So had to interrupt the it.  Have not been able to get it back again.  Anyone would solve this problem?

  I use bluetooth for HotSync.

  My Tungsten E2 is pocket computer.

  I use Windows 7 Home Premium on my PC,

  Palm desktop 6.2.2 Access

  HotSync Manager 7.0.2

  There may be the database at the source of the problem. Click on the following link for the program called DbFixiT. This program has a trial version that you can download and install on your Palm OS device. The trial version will search the database and then to declare the corruption. You can then search records at the origin of the problem and fix them yourself or you can buy the program and do it automatically repair records.
  
  http://www.pimlicosoftware.com/dbfixit.htm
  
  To install the program, the value of all lines of "doing nothing" except quick installation or install if you use Palm desktop 6.2.
  
  After installing the program on your handheld, the scanner and scan also to BLOBs in the calendar.
  After you clean up the database on the handheld, set the conduit in hotsync for handheld overrides desktop and perform a hotsync.

  If you use Win7 64-bit, you can download and install the drivers USB 64-bit for this version.

  Here is the link to the post on the forum with the link for the drivers.

  http://forums.hpwebos.com/T5/Windows-HotSync/64-bit-Palm-Desktop-drivers-are-here/TD-p/337516

  The best way to protect your data is to export the data in each category of Palm Desktop in a separate folder on your PC.
  
  Create a new folder on your PC somewhere that suits. Name it something like Palm Desktop data. Click on the link below and follow the instructions on this page for the export procedure.
  
  http://KB.hpwebos.com/wps/portal/KB2/common/article/28734_en.html
  Make sure you only select everything for the beach in the export window.
  
  With the data stored in the created folder, make a copy of this file and save it on a USB key, cd - rw or external hard drive.
  
  Whenever you change in Palm Desktop, export the data that has been changed in this file and save again to external media.
  
  With this process you can always import the data in Palm Desktop, whenever you have a problem with the data in Palm Desktop, or if your computer/hard drive/device crash.

  Another backup option is to use NVBackup and backup on a SD card on your E2. Google search for NVBackup for PalmOS, and if you have a 1 GB SD card, you can save the map for disaster recovery.

  Here is a link to a post on the forum about nvbackup.

  http://forums.Palm.com/Palm/Board/crawl_message?Board.ID=hardware&message.ID=49854

  For reference purposes, click the following link to the support page for your device on the kb.hpwebos.com Web page.
  
  http://KB.hpwebos.com/wps/portal/KB/na/Tungsten/E2/unlocked/home/page_en.html

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.

• Palm TX - calendar office empty and now it seems that it syncs with the device.

  Hello Forum members, Palm

  I have Windows 7 and I synchronize my Palm TX for desktop 6.2.2 via bluetooth.  Two weeks ago, I loaded my calendar of office, and it was empty.  I have made several attempts to synchronize my device to the desktop computer in the hope to recover my datebook\calendar and it seems that the synchronization stops during the update of datebook\calendar.  I uninstalled and reinstalled the desktop software, I also imported the appointment file... but it is also empty.

  Any assistance will be greatly appreciated, thank you in advance :-)

  Lori

  There may be the database at the source of the problem. Click on the following link for the program called DbFixiT. This program has a trial version that you can download and install on your Palm OS device. The trial version will search the database and then to declare the corruption. You can then search records at the origin of the problem and fix them yourself or you can buy the program and do it automatically repair records.

  http://www.pimlicosoftware.com/dbfixit.htm

  To install the program, the value of all lines of "doing nothing" except quick installation or install if you use Palm desktop 6.2.

  After installing the program on your handheld, the scanner and scan also to BLOBs in the calendar.
  After you clean up the database on the handheld, set the conduit in hotsync for handheld overrides desktop and perform a hotsync.

  The best way to protect your data is to export the data in each category of Palm Desktop in a separate folder on your PC.

  Create a new folder on your PC somewhere that suits. Name it something like Palm Desktop data. Click on the link below and follow the instructions on this page for the export procedure.

  http://KB.hpwebos.com/wps/portal/KB2/common/article/28734_en.html
  Make sure you only select everything for the beach in the export window.

  With the data stored in the created folder, make a copy of this file and save it on a USB key, cd - rw or external hard drive.

  Whenever you change in Palm Desktop, export the data that has been changed in this file and save again to external media.

  With this process you can always import the data in Palm Desktop, whenever you have a problem with the data in Palm Desktop, or if your computer/hard drive/device crash.

  For reference purposes, click the following link to the support page for your device on the kb.hpwebos.com Web page.

  http://KB.hpwebos.com/wps/portal/KB/na/tungsten/TX/unlocked/home/page_en.html

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.