Number nav to display records

Similar Questions

• Registration number is not displayed

  Hello!

  Can someone help me please...?

  I bought my laptop from abroad and 2 to 3 weeks later my laptop started showing the error hard drive and when I went to an authorized dealer to ask about his guarantee, they told me that my phone shows no registration number and they can claim, while other details from your cell phone has been updated , by the way, I contacted with Toshiba to register online for this problem, they also told me that they cannot update record number is not displayed as well. And gave me this link to visit

  http://forums.computers.Toshiba-Europe.com/forums/index.jspa

  Now, please tell me this is the way to create such a problem? This company of toshiba's disappointing show us such reckless attitude. If the registration number of my laptop does not, so I don't pretend in my country.

  Please give me the best solution.

  Waiting for your answer!

  Ali

  Have you registered your laptop?
  If registration is done properly can check the status of the inscription on http://www.toshiba-tro.de/unitdetails

  Another way to contact Toshiba under [email protected]
  Explain the situation, send important information and, if possible, a copy of your bill where Toshiba can see exact date of purchase. I hope they help you with this.

• In the cell free game the game number is not displayed in windows 7.

  Hello

  When I open a game of free cells I observed that the game number is not displayed on the top bar.
  This number was posted in all earlier versions of windows.
  I have a screenshot of the same thing, but I couldn't find a link to download.

  Thank you
  Joel

  Hello, Joel

  It is listed in the lower left corner.

  I hope this helps. David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BI Publisher - how to display the number of lines displayed at the bottom of the table on each page

  Hello

  We are the conversion reports Actuate BEEP and not able to understand how to view "Accum.Total = < n >" at the bottom of each page. In the attached report to operate it, "Accum.Total = < n >" must be displayed at the bottom of each page where < n > is the number of lines displayed on the current page and previous page.
  
  For example, if there are 10 rows in the result set, if the 1st page displays 4 rows, 2nd page displays 3 rows and 3rd page is 3 lines and then Accum.Total = 4 on page 1, Accum.Total = 7 on page 2 and Accum.Total = 10 on page 3.
  
  Note that we use the property table "allow the lines to break Pages = False" as we do not want a specific line can be split across pages.
  
  I enclose a sample of report actuate, rtf, BEEP and XML report for testing file.
  
  Approach used so far-
  
  1 > I tried to put the counter in the footer, but it seems that only the fields that come directly from the IC can be used on the header/footer. No matter what form text field or variables defined in the report.
  
  2 > I used approach given in the link below. Using this approach, I am able to view a coded value hard at the bottom of every page (just below the table) but his does not work for the variable (in my case the counter c1).
  
  https://blogs.oracle.com/xmlpublisher/entry/continued
  
  3 > on Google, I found a few articles on the page break conditionally as display only certain numbers on a page or the page by section break but in our case, its dynamics and its number of lines to display on a page is driven by data, so I could not think of a certain condition to use in "Condition." ": If" for use as a page break.
  
  Thank you

  Richa
  

  Watch see the-Report

  http://docs.Oracle.com/CD/E28280_01/bi.1111/e22254/create_rtf_tmpl.htm#do_bf_cf

  Download the https://blogs.oracle.com/xmlpublisher/entry/continued sample

  Add

  <>

  name = "contd_footer".

  format = "99G999G999" / >

  After the field "Footer."

  If need to use a footer to display the meter then and sous-modèle with code above and call it in footer

• PLS-00362: Invalid cursor return type; 'NUMBER' must be a record type

  Hello
  
  Having a little trouble with the following code example provided to http://www.dba-oracle.com/plsql/t_plsql_cursor_variables.htm:

    1  DECLARE
    2    TYPE t_ref_cursor IS REF CURSOR RETURN NUMBER;
    3    c_cursor  t_ref_cursor;
    4    l_row   NUMBER;
    5  BEGIN
    6    DBMS_OUTPUT.put_line('Strongly typed REF CURSOR using SCALAR type. Expect an error!');
    7    OPEN c_cursor FOR
    8      SELECT COUNT(*) cnt
    9      FROM   cursor_variable_test;
   10    LOOP
   11      FETCH c_cursor
   12      INTO  l_row;
   13      EXIT WHEN c_cursor%NOTFOUND;
   14      DBMS_OUTPUT.put_line(l_row);
   15    END LOOP;
   16    CLOSE c_cursor;
   17* END;
   18  /
    TYPE t_ref_cursor IS REF CURSOR RETURN NUMBER;
                         *
  ERROR at line 2:
  ORA-06550: line 2, column 24:
  PLS-00362: invalid cursor return type; 'NUMBER' must be a record type
  ORA-06550: line 2, column 3:
  PL/SQL: Item ignored

  In the code above, SELECT COUNT (*)... returns a NUMBER. I know it's an aggregation function, but it returns a single value.
  Why can't return a value in a column of a row in a NUMBER?
  How can I change the SQL code so that I can do this?
  
  Furthermore, I wonder about the use of FETCH with a count (*)... FETCH is supposed to fetch the next row... How it works when you select an aggregate as County?
  
  Thank you very much
  Jason

  >
  TYPE t_ref_cursor IS REF CURSOR RETURN NUMBER;
  *
  ERROR on line 2:
  ORA-06550: line 2, column 24:
  PLS-00362: Invalid cursor return type; 'NUMBER' must be a record type
  ORA-06550: line 2, column 3:
  PL/SQL: Ignored Element

  In the code above, SELECT COUNT (*)... returns a NUMBER. I know it's an aggregation function, but it returns a single value.
  Why can't return a value in a column of a row in a NUMBER?
  How can I change the SQL code so that I can do this?
  >
  The exception is in line 2: your cursor statement. And the answer is in the text that you access
  >
  The return value of a strongly typed REF CURSOR must be a folder that can be defined using % TYPE % ROWTYPE attributes or record structure.
  >
  You said the CURSOR to return a NUMBER. And as the text says, he must be a 'record '.
  >
  Furthermore, I wonder about the use of FETCH with a count (*)... FETCH is supposed to fetch the next row... How it works when you select an aggregate as County?
  >
  As you said already FETCH retrieves the next line, if any. A query is a request is a request. It returns a result set. A query that uses aggregates returns a result set. A query that does not aggregate returns a result set.

  Your simple COUNT (*) SELECT query returns a result set that consists of a LINE and a line a ONE COLUMN of type NUMBER. Although there is only one column in the result set, what is returned is a RECORD or a LINE. That's why you have to report your data cursor return type a document using the % ROWTYPE or % TYPE attributes or a record structure.

• How to display records with zero on dashboard

  Hi expert,
  
  If I have a product dimension table,
  a fact table
  
  
  If there are records containing values in the comic book, A product void.
  
  If the logical column of the fact is SUM (...).
  
  How to display records with values null in the dashboard.
  
  Use the outer join?
  
  or another method?
  
  I don't want to use outer join because it makes the PRD be so complicated

  Jin
  Pull all of the columns in the criteria, it will show NULL for a product

  For zero, on the done column use IFNULL(fact_col,0)

  that looks like this

  http://a.imageshack.us/img180/6616/Ifnull.jpg

  Thank you
  saichand.v

• How to set the number of lines displayed in a classic report when running?

  Hello
  
  Our client has several hardware configuration standard customer and want to allow end-users to choose their 'view profile' at the time of the connection. This "display profile" would contain some predefined values for these configurations material and supposed to give various parameters that must set the number of lines displayed in a classic regional report.
  
  I tried to provide parameters on the report of the region, but he has refused to accept anything other than numeric values. Is it possible to do?
  
  Best regards, Tamas

  The link is about the closest correlate in the documentation to the description of the attribute Number of Rows (point) .

  Looks like you tried to write - in vain - a name string or change of item in the attribute Number of Rows . The attribute Number of Rows (point) is the one that can actually do. For a list of items in the application, click the icon of the flashlight next to her.

• Sum on multi block record for only displayed records

  Dear all,

  I've been invited below question on interview session and I really do not come upwards with a logic to accomplish.

  In a multi record block, not the displayed items property has the value 10. In this block, an element is placed named current_rate (Number data type).

  While the form is running, it will display 10 records, and I need to display the sum of the current_rate for these 10 records. When I scroll to display multiple records, this amount must also be changed based on the record number of display. Is it possible to make forms to operate this way?

  Please advice.

  Thank you and best regards,

  The roots.

  Another way - create element (e.g. "sum") in a block of control (for example, "cb") and write this:

  -Prior REQUEST for the block of data (for example "E1")

  : cb.sum: = 0;

  -After REQUEST for the block of data (for example "E1")

  : cb.sum: =: cb.sum +: emp1.salary;

  Query the property size array in a data block (specifies the maximum number of records Form Builder to retrieve from the database at the same time)

  must be 0 (default = the number of records can display the block, as indicated by the property of block number of records displayed).

  Concerning

• Text box layout problem - and the number of rows displayed

  Hello
  
  Wonder if you can help with my 2 problems
  
  1. when I create text boxes, the label is displayed to the left of the text box. How can I display label above the text box
  CGH
  
  Label
  TextBox
  
  Instead of
  
  Text box label
  
  2. when I ask report showing my data, that it shows that 15 records per page, for the next set of records, I need to click on the following icon at the bottom of the table to go to the next page.
  How can I view all on the same page?
  
  Thanks for help

  1. simply check this using the Horizontal / Vertical alignment of attribute in the section of the label of the element of the Page definition.

  2. in the report of the attributes, the value of the plan of paging None; and the number of rows and number of maximum lines to more than the number of rows that will be returned by the report query.

  (You should only ignore this last you really know that the number of lines make this a reasonable option.) Nobody is going to want to scroll through thousands of lines or wait 5 minutes for total information overload. You wouldn't be popular with your admins/ISP network due to the excessive bandwidth consumed either.)

• HP has a serial number of the system record the product key from OS mapping?

  It came to pass that my laptop HP 6730 s a) Win 7 Pro installed and needs) b the product key on the bottom faded over time.  I could download the Win7 ISO to reinstall, but I need my original product key.  No chance, it is somewhere recoverable otherwise than on my old laptop?

  Hello:

  HP does not keep records like that.

  Order a set of recovery discs, and you should not need the product key.

  If you live in the USA/Canada, call the 1-800-334-5144.

  The model # and the serial number of the laptop handy to give to the customer services rep.

  A set of recovery disks will cost you $10,00 delivered.

• Reduce the number of cells displayed by indicator table

  When I'm hacking through a few screws I inherited, I often create a table indicator to track data.  I have an oversized indicator, i.e. perhaps seven cells for what turns out to be a five-element array.

  I can easily increase the number of cells is displayed but seem not to be able to reduce their.

  Y at - it a trick I'm missing?

  When you first place a 1 d table control or an indicator, LabVIEW is unclear if you can stretch it horizontally or vertically.

  The RESIZE tool, that you get so something on the lower right.

  

  Once you have decided that you want to extend vertically, if you want to resize once again, the point of RESIZING is at the bottom of the Center.

  

  If you have it stretched horizontally and want to resize again, the point of RESIZING is the center of the right side.

  

  Is - this good user interface?   No, if you ask me.  But nobody asked me.  It's the way it is, however.

• Query to display records that match the given condition

  Hello

  Can you please help me with a query for results, which corresponds as indicated

  I have a table... Let's say SOURCE

  Contract_id Number (40)

  coverage_id number (40)

  product_Version_id varchar2 (20)

  product version of contract id coverage_id ID

  12345 1111 AAA

  12345 222 AAA

  12345 3333 AAA

  12345 4444 AAA

  6789 1111 AAA

  6789                     222                       AAA

  6789 3333 AAA

  My requirement is like do not display the id of the contract that has coverage id 4444

  Expected result:

  6789 1111 AAA

  6789                   222                     AAA

  6789 3333 AAA

  Currently, I get as

  12345 1111 AAA

  12345                  222                           AAA

  12345 3333 AAA

  6789                   1111                          AAA

  6789                      222                         AAA

  6789                     3333                        AAA

  I also get contract 12345... I don't want this contract id to display the result

  I used "<>", NOT IN, is not in the query, but I do not think that I am writing in a proper way. Please help me

  Thanks in advance

  Hello

  I hope that you can adapt the solution in #5 response above to your table.

  Here is another common way to do this sort of thing, by using a NOT EXISTS subquery:

  SELECT *.

  Contract_coverages m - m is hand query

  WHERE DOES NOT EXIST)

  SELECT 0

  S contract_coverages - s is subquery

  WHERE s.contract_id = m.contract_id

  AND s.coverage_id = 4444

  )

  ORDER BY contract_id, coverage_id

  ;

  EXISTS subqueries are almost always correlated with their Super request.  Why?  Discuss.

• Number of instances + display

  Hi, I'm currently having a problem with getting the instance Manager to count and display the current number of subforms.

  I have a TextField called TextField117 in a subform called Row24, which is in a subform called Set2.

  I also have a button called 1 button that creates a new instance of Set2 each time on it.
  What I'm trying to make, is that TextField117 gets automatically filled with the # whenever the button is clicked, so in the first set2(the original), it will show 1.

  Then when the button is clicked, it will create an another set2 which has its own textfield117 and I want that textfield117 to display 2. (a meter). and so on... 3, 4... 5 6...

  
  If there is someone who could help, I'd appreciate it. Thank you!

  Hello

  If you set TextField117 to calculate - read-only and put the code in the calculate event you can have the field contains the value you want

  in the calculate event, you can write the reference_syntax necessary to access the parent set2 and retrieve the index with the following:

  this.rawValue = (this.parent.parent.index + 1) m:System.NET.SocketAddress.ToString ();

  Depends on how many parents must Access set2, must be paid according to the hierarchy...

  Hope this will help

• battery number is not displayed

  I use LR5 on a Windows 7 system.

  I stacked photos, buttons battery show, and the stack expands and contracts properly.

  But the number of photos in the stack does not appear.

  I watched the presentation options, but can't find a selection to display the number.

  I would like any suggestions or links that you can offer.

  Larry

  Some troubleshooting steps:

  1 make sure that the option display > Display Options > grid view > thumbnail Badges is checked.

  2. make sure that view > grid view Style > Show options is checked.

  3 reset LR preferences, which sets out a number of surprising problems when the LR user interface is wobbly: reset the lightroom - updated - Lightroom Forums preferences file

  4. If none of those who help, post a screenshot of high resolution of your LR window.  That could give clues.

• Re: How to display records of newlyadded first in the table

  Hi all

  I use Jdev 11.1.2.3.0

  My requirement is I have a table in this table, I have a table and the form. Here, I want to display newly added records, first in the table.but that table always shows of old recordings first.so how do I display it.can someone help out me.

  Thank you

  G.Shilpa.

  You can control the line newly inserted into the table of the ADF

  http://lucbors.blogspot.in/2010/12/ADF-11g-how-to-control-where-new-row-is.html

  ttp://mjabr.WordPress.com/2011/07/02/how-to-control-the-location-of-the-new-row-in-aftable/