Apps not showing Panel does not after the installation of new

Similar Questions

• After the installation of new original canon cartridge pg40 my canon printer cannot recognize ink

  After the installation of new original canon pg40 cartridge my printer canon may not recognisd ink

  Hi Jeet,

  1. What is the model number of your printer?

  2. you receive messages or error codes?

  You can check the following link and try to run the fixit and check.

  Diagnose and automatically fix problems printing and printer

  Alternatively, you can contact Canon for help.

  Support for Canon

• HP 8600 prints only once after the installation of new

  I installed the new drivers on HP 8600 printer all-in-one. After the installation of the printer print very well. A few hours later not printing and print I uninstall and install again.

  Any ideas? TIA.

  chubuk7

  Hi chubuk7,

  When the printer stops printing, instead of uninstalling/reinstalling, I recommend to run printing HP and doctor Scan. It's a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity. Click on the link below for more details:

  http://goo.GL/PXeko

• Headphone Jack does not not after the installation of the hard disk. Inspiron N7110

  Taken helmet dell inspiron N7110 does not work after that I installed a new hard drive on laptop of husbands. The speakers of the laptop work. When I plug in headphones or external speakers, the sound continues to fate of the speakers of the laptop.

  I went to the Device Manager and there is no yellow triangles.

  Audio device on the laptop troubled Manager are:
  1 device HD Audio
  2 device HD Audio
  Microsoft

  Device Manager on MY sound inspiron:
  1 Bluetooth
  2 Intel display Audio
  3. Realtek HD Audio

  I tried the Dell drivers to update, but it still does not work.
  I have a driver disc and the utilities provided with the laptop.
  Don't know if I can find the solution on disk

  Thanks for any help.

  Hello. The list in Device Manager 2 computers if they are different, it is because your supplier (manufacturer) has drivers installed, but doesn't your husband - he uses native Windows (by default) drivers. To install drivers sellers use the disc that came with the laptop, or go to the Inspiron 17R 7110 html page to see links to all the drivers for Dell provided for this model. I mean all for different versions of Windows which takes in charge of Dell on this model, and the various versions of pilot, later and older.

  Because you were watching from a blank hard disk, you must install these drivers in this order.

  1 Dell System Software - find on the page html under the category: System utilities. It is available only if the laptop is running Win 7 32-bit or 64-bit.

  2 Intel HM67 Chipset drivers, under the category: Chipset. Available for Vista, 7, or 8.

  3 of card reader Realtek driver, under the category: Chipset. Available for Vista, 7, or 8.

  4. audio Realtek driver, under the category: Audio. After his laptop computer installation of your husband will show Realtek High Definition Audio Device in Device Manager.

  5 Intel 3000 or Graphics 2000/3000 under the category: video. After his laptop computer installation of your husband will show Intel display Audio in Device Manager. Intel display Audio's HDMI audio driver when you connect to a TV with an hdmi cable.

  6. some laptops have a second graphic device that takes over from the Intel graphics card during graphics intensive games like situations. If computer laptop your husband has this feature, then get the driver nVidia too.

  Most of the other devices will agree with it Windows native drivers for now, and you can install them later in an order any if you need.

  retiredluckycat

  When I plug in headphones or external speakers, the sound continues to fate of the speakers of the laptop.

  I don't know if installing drivers will fix this or not. The headset should work fine now with just the native Windows driver. Install the drivers and see what happens. If you need more information, mention the operating system and possibly the model of your laptop and its operating system.

• Hyperion does not not after the Installation of the new OS

  Hi all
  
  I work in Hyperion since last one year. How I use Hyperion workspace is as follows:
  First of all, I connect to the VPN, then I open the workspace in my browser (IE9) that shows me the login screen.
  
  Now, I have recently reinstalled windows 7 on my system and after that when I try to open the workspace in the same browser it opens, its only demonstrates rather 'Loading... '. "in the center of the screen.
  I even try updating JRE and apart from this I also try to install the JDK, but his does not resolve the issue. Any recommendations as what is missing in my case?

  Hello

  Try to install Remote XUL Manager, firefox addon and add your URL in that and then try to open it. Let me know if that helps...

  Thank you
  VC

• XI Adobe bought and downloaded from the site does not not after the installation of the automatic update

  I purchased a license through web for xi Adobe & downloaded and installed.  Worked perfectly until the recent update (app was config auto-Update). Now the product does not open, it immediately passes to "not responding" when opening a .pdf file.  I tried to go programs - "fix" without success. I DON'T want to update for DC, as the automatic upgrade has tried to make me do.  I just want what I bought to work! Please notify.

  I have searched all over the support sites and knowledge base, but have not found a solution.  I'm willing to pay for support (although I think it should be on Adobe for trying to move me to a software that I did not ask for!)  But there seems to be NO WAY to access support via phone either.  You are sent through several self-invited, which only direct you to this site. If you happen to get an operator, they EVEN make!

  ANY SOLUTION SOMEONE? In my view, that I've been robbed! Not very practical to sell a product and THEN offer no possibility to use unethical or anything else once you take the $$$.

  reset your preferences - https://forums.adobe.com/thread/1595848?start=0&tstart=0

  (and no adobe help is available via Skype, if someone offers.)

• Desktop browsers does not not after the installation of Windows 8 Pro

  Since the installation of Windows 8 Pro, I can't use any browser in the office, nothing to do. All problems seem to get fixed by going to the browser on the desktop, but IE, Chrome and Firefox do not work on my desktop. Also just found out that I can't connect to the ITunes Store, either. Please help me with this. Thank you.

  Hello

  If it works well before?

  Try to set Internet Explorer as your web browser as default, it worked for me.

  See the steps provided by Jessen: http://answers.microsoft.com/en-us/ie/forum/ie10_cp-windows_cp/how-do-i-make-ie-10-defualt-web-browser/4f5a15f3-7eb5-4212-a6db-089f2426df17

  All the best...

• Satellite Pro L20: FN + F8 key does not work after the installation of new

  Hello
  I just reinstalled xp on my laptop and I can't find drivers that work my hardware (F8) wireless function key.
  Unfortunately I don't have the CD of drivers Toshiba with me, I work as an expat abroad so I count on the official website of Toshiba for my drivers.
  I downloaded all drivers successfully vital but can find no reference on the site that will help me with the problem.
  I tried to turn on the radio via the LAN setting but when I try to activate I get the message telling me to turn on the hardware!
  Any suggestion would be accepted with gratitude.

  Thank you

  Hello

  On the Toshiba driver page, you will find the installation instructions how to install all the drivers of Toshiba.
  It is very important that pilots will settle in the right order.

  In addition, if you want to spend on the WLan, you have to activate the WLan switch on the side of the laptop and also to enable the antenna WLan with FN + F8.

• Page of developer apex 4.2 not appearing is not after the installation of more than 10g

  Hello
  
  If by chance it crashed my Win XP OS. Yes, it is the portable desktop and I can't upgrade the OS for now. In any case, I had the whole machine reconfigured and installed 10 g which was version 2.1 and everything was fine. Earlier, I was running apex 4.1.1. I couldn't find the installation on the site of oracle, so I downloaded apex 4.2 and ran the installation according to the page
  
  http://www.Oracle.com/technetwork/developer-tools/Apex/application-express/upgrade-Apex-for-XE-154969.html
  
  Everything went through properly except for step
  
  5 log in to SQL * more (as above) and load the images:
  
  SQL > @apxldimg.sql APEX_HOME
  
  [Note: APEX_HOME is the directory that you specified during the have decompressed the file.] For example, under Windows "C:\". ».]
  
  where it asked me to enter the directory and I walked into C:\
  
  This is what happened
  
  SQL > @apxldimg.sql
  
  PL/SQL procedure successfully completed.
  
  Enter the value 1: C:\
  old 1: create the directory APEX_IMAGES as '& images/apex/1 '.
  new 1: create the directory APEX_IMAGES as 'C:\/apex/images '.
  
  Created directory.
  
  ^ C
  C:\apex >
  
  
  I see a backslash and oblique so I did a ctrl c. When I tried running the new command - @apxldimg.sql
  
  He would just open the .sql file.
  
  Don't know if this is the problem, but still, after that, when I tried the 'go to the page of data. It shows just a blank page. No idea of what needs to be done. I was happy with 4.1.1. Which is available anywhere? Maybe I can remove XE and do a fresh install with it.
  
  Please notify.
  
  Thank you
  Ryan

  Try

  C:\

  Even if it gets rewritten as C:\/apex/images I think that it will always load the images correctly. If the script takes less then a minute (depending on the speed of your machine), then he probably did not.

• Get the Notes after the installation of Dungeon

  Hello

  I just destroyed my Notes from the iPhone, with some important financial information in them. I'm pretty * and thought do not forget to make easy the next time and not install unknown software next time before saving the data.

  OK well, I have a backup of the iPhone, is not too bad, but I would like to get more fresh if possible data, so I ask other solutions (I'm new to Apple).

  What I did:

  -Opening note, do not do something bad in him. There seems no possible local version (by scanning or other) change.

  -Config is: sync Gmail Note; iCloud off sync (and Notes 'stored as local' in the config of Notes). My Notes where not Sync Google keep however.

  -J' so installed Dungeon on iPhone

  -Notes appeared in "Notes of Gmail" instead of "local" notes Date of lost note suddenly became 27/12/15 (not a recent date than this post, for example 20/01/16)

  -Disabled notes in Gmail and enabled in iCloud

  -Nothing found anywhere (Gmail, iCloud, iPhone). Only option seems to be to restore iPhone.

  Any ideas on what can be done, maybe they are hidden somewhere in the limbo of synchronization?

  Thank you

  Answer found in Re: Save to Application Notes

• Replace the cookies all blocked after the installation of new

  When Firefox recently stopped working (would not not connect to the Internet), I first uninstalled Firefox. Then, I downloaded a new copy from the Internet (same version) and reinstalled from scratch. However, all my "blocked" cookies are now missing.
  I have the complete list (blocked cookies) in MSWord, in case something like this happened, but I don't know how reasonably the entire list again enter the new copy of Firefox, at one time other than very tedious.
  Any help will be appreciated.

  It seems that at some point in the process, you used the reset button.

  Your old blocks of cookie in-situ are in a database file named permissions.sqlite the folder on your desktop. It contains a range of other specific permissions and settings (I don't remember all the details off the top of my head), so if you allowed plugins for specific sites, which would also be there.

  You can replace your new database (usually white) with the old and see how it goes. If the transplant fails, you can remove the database and Firefox will start to build a new one.

  If you want to try it, you can open your currently active profile folder using

  Help > troubleshooting information > in the first table file display button

  After the release of Firefox, you can rename your current permissions.sqlite to something like permissions.old.

  Then copy the permissions.sqlite from your old profile to your desktop folder in your new.

  After Firefox starts again, check your Exceptions dialog box. Success?

• Problems NB - 550 d after the installation of new windows

  I helped my friend to install Windows 7 Ultimate, but he had some problems.

  1. it can not change the screen resolution setting left to 800 * 600 (or something like that).
  2. it can not use the Internet (wired and wireless), he thought that there should be a missing driver, but he don't know what pilot it is, or what is its chip model.
  3. the original windows came with a lot of program, he do not know which of them is useful.
  Hardware configuration, Flash card support utility, ConfigFree, Web camera, things like these.

  > 1. It cannot change the screen resolution setting left to 800 * 600 (or something like that).
  Seems that required display driver has not been installed.
  Visit the European driver of Toshiba and download and install the compatible display driver!

  > 2. He cannot use the Internet (wired and wireless), he thought that there should be a missing driver, but he don't know what pilot it is, or what is its chip model.

  You need the driver WLan and LAN!
  Both are on the Toshiba driver page:
  http://EU.computers.Toshiba-Europe.com/-> support & downloads

  > 3. The original windows came with a lot of program, he do not know which of them is useful.
  > Hardware installation, Flash card supports the utility Application, ConfigFree, Web camera, things like these.

  On the European driver Toshiba page, you can download all the tools and drivers. You can also find an info and details for all of these software. In addition to information, you will find a brief description what is the unique software
  But if you're not sure if you need this or don t, then install all ;) it s better to have software installed on Miss a feature ;)

• Fonts does not not after the installation of update 12/14/12

  Original title - last updated 14/12/12

  Update the Microsoft or to the 14/12/12 has done several of my fonts does not work.

  How can I make them work again?  I read something about going to programs and features and turning them off... but I can't find no programs and features in my Panel control as she says.

  Do NOT programs and features.

  To add or remove programs.
  The problem is when you uninstall the update, your PC will be less safe. I hope that this problem will be resolved soon. The page that you said:
  Known issues with this security update

  • We are aware of issues related to the rendering of fonts OpenType (OTF) in applications such as PowerPoint on versions of Windows that occur after you apply this update of security involved. We are investigating these issues and will take the appropriate steps to resolve known issues.

• UMB and BACK applications does not not after the installation of KB2724197

  Original title: KB2724197 UMB does more, default apps BACK.

  This update has a bug in this document, in my opinion.

  The problem lies in the fact is no longer works UMB and all drivers/apps/back load in conventional memory.
  There is not enough memory to some applications back to the left, and so they do not.

  Check with mem /c

  U should see a lis tof apps in conventional memory AND a list of applications in high memory.
  If you have only conventional memory apps, then you have this update installed at the source of the problem.
  
  Uninstall, and then hide update is the only solution for now.

  The fix for the issue of the missing UMB was released today for Windows XP and Windows 2003.

  Here is the link:

  http://support.Microsoft.com/kb/2785487

  Thank you for your patience.

  Thomas Gschwandtner

• The Synaptics Touchpad in Acer Aspire One does not not after the installation of the wireless mouse.

  After you install a HD on my Acer Aspire One wireless mouse, the Synaptics Touchpad works not at all even if feataure troubleshooting indicates it works correctly.  Default is always to the wireless mouse. I tried to deavtivating the wireless mouse and reset to factory manufacturer.  This does not re-enable the Touchpad.

  Try Fn + F7. This option turns the touchpad on and outside.