Are LabVIEW OOP "Helpers" editable?

Similar Questions

• LabVIEW oop variant in the private class data

  Hello

  I'm new to LabVIEW OOP.

  Is there a way to get a control of type variant in the 'grouping of private class data"for a class? If not, is there an alternative for handeling given variant? I use LV 2013.

  Thank you.

  Just, you use a control of type variant, and put in the big giant cluster.  It's the same for any other data type.  Is there a specific problem that you run into?

• I don't see the icon of NOR-DAQmx in measurement window in Labview 2013 (student Edition)

  Hi all:

  I installed the driver NOR-DAQmx and Labview 2013 (Student Edition). I connected an acquisition of data NI USB-6008 and tested using NOR-DAQmx and that it works correctly.

  Now, I tried to make registration of data of this device using the software Labview installed but as I open a new project and go to the block diagram and show the measure menu I can't NEITHER-DAQmx icon in the window (Menu) measurement in Labview 2013 (student Edition).

  Any suggestion?

  I enclose two screenshots.

  Help, please.

  Thank you

  In what order did you install software?

  You must install LabVIEW first, followed by DeviceDrivers!

• I am trying to 'push' and oppose.  I googled and it said to go to edit > Preferences > general > keyboard increment, however, there are no preferences under Edit in CC.  Where should I look?

  I am trying to 'push' and oppose.  I googled and it said to go to edit > Preferences > general > keyboard increment, however, there are no preferences under Edit in CC.  Where should I look?

  CC Mac Cmd K or Illustrator > Preferences

• LabVIEW oop build warining!

  Hello!

  I write a labview program with the method of OOP (object oriented programming), and the program is very well. But when I build to exe, the manufacturer of labview display warning message: "LabVIEW has prevented a file name collision during the build. Names of duplicate files can be copied to the same destination. You can rename the files as part of the build process to avoid name conflicts. »

  I know it's certant this file duplicate name when to use 'Class', and how I can display the warning message when build.

  Pre-LabVIEW 2009 EXE has a flat directory.  All controls in the screw and outbuildings were in an EXE file and there is no record in this EXE.  For this reason, you cannot have 2 files in your project with the same name (because they can't go in the same directory without overwriting a).  From 2009 to fix it NOR allowed EXEs have directories so screws can have the same name on disk, but in memory, they can have a different name, by adding the class, or the name of the library itself.  So you can have PowerSupply.lvclass:Init.vi and CAN.lvclass:Init.vi both disk just as Init.vi

  In the new versions of LabVIEW, you can use the old file structure by defining the Layout 8.x to true in the specification to build the EXE file (under Advanced), but you really want to do because of the collision problem you see.

  EDIT: and it seems that your code has been registered in 8.6 before the existence of this feature.

• LabVIEW 2009 Student Edition Vista x 64 install no failure, no error message even though

  I am trying to install a copy of LabView student edition 2009 and initializes whenever installation, modules fail to install for each single module.  Also, there is no error message.

  I received a message that LabView can not work properly because of the firewall Windows, which I disabled it. This message sent me on ni.com/frinfo, code expm69.

  Let me know, I'm a little confused as to what is happening.  It would be due to a patch or what not?

  Thank you!

  Hi imagineerme,

  It is possible that the CD is damaged.  You can either try a different CD if you have access to one, or because you have access to a student version, you should be able to also access LabVIEW via ni.com/src.  All LabVIEW versions are available for download on this site. Please let me know if you are able to download LabVIEW from there.  NI.com/SRC will also specifically download the 64-bit version of LabVIEW, since you have a 64 bit OS.  I hope this helps!

  Kim

• How to find the DAQ Assistant in LabVIEW student 2009 Edition

  I got 1 Core and Core 2 in LabVIEW 2009 prices in June. When I went to use the student edition I have LabVIEW 2009, I couldn't find the DAQ Assistant. This will present a problem when I come to use it in class this fall. It works fine on my version 8.5.

  You must install DAQmx, just like you had to do with 8.5.

• By comparing the LabVIEW OOP class hierarchies

  Hi all

  The Question

  Does anyone know of a tool for comparing the hierarchies of LabVIEW classes?  (As 'Compare VI hierarchies' for .lvclass hiearchies?)

  For example

  Let's say I have foo.lvclass in both projects, and I want to compare the two instances, and their respective members.  One instance has methods that the other is not?  Is a method or differ from private data?

  Why?

  I have several applications with dozens of classes, which many must be interchangeable, and I want to quickly determine what classes are later, perhaps to consolidate some common code base.

  I thought about this announcement as a suggestion on the exchange of ideas, but I didn't know if I just don't see a feature that is already there.

  Thank you very much

  Jim

  Hi Jim,.

  It doesn't seem to be a way to do this. The nearest feature of you, that I could find was to use hierarchies of VI screw/compare compare to compare files .ctl for two classes. The LabVIEW help topic documents how to proceed:

  http://zone.NI.com/reference/en-XX/help/371361L-01/lvhowto/comparing_vis/

  However, this does not really reach the feature you're looking for. Thank you for posting this idea to the exchange of ideas!

• How are added to Lightroom editing in Photoshop Elements

  I just upgraded to Photoshop elements 14 13. When in Lightroom and I click on the Photo (which I want to edit the image in Photoshop) 13 and CC are listed not 14. How can I change this?

  Hi Magicsparkes

  Please consult help of Adobe Photoshop Lightroom | Editing photos Lightroom in Photoshop or Photoshop Elements

  You must select the external editor like Photoshop Elements of Applications/Program Files.

  Example: -.

  

  Let us know if this helps

  Concerning

  Assani

• Best way to configure Photoshop workflow settings when source photos are taken in AdobeRGB, edited from a wide and output range in sRGB?

  Be able to quickly produce finished photographs is of importance with the majority of my photography work. That's why I pull, process and deliver JPEGs. There is no advantage to my clients to my shooting RAW for this time sensitive workflows. I won't be able to accommodate any possible future uses of the photos, so I shoot using the Adobe RGB color space. The output of my clients are JPEG images for use on the Web, so of sRGB. Currently, I used a screen wide gamut (NEC PA302W) with a 24-bit graphics card. (I plan on upgrading to a 30-bit card in the future).

  I noticed that in Internet Explorer, the reds in my finished photos are too intense on my screen. My photos look good in other web browsers on my screen. This situation worries me because I don't know exactly why it's happening since my pictures have embedded sRBG color profile and IE supports embedded color profiles. If anything, I think that the reds would be too intense in other applications that do not support embedded color profiles.

  Please let me know if my work flow can be improved outside shooting RAW and use a 30-bit screen:

  1. Take JPEG pictures in Adobe RGB color space
  2. Edit photos in Photoshop using range wide screen, 24-bit
  3. Color settings: colors of the monitor (Monitor RGB - PA302W, calibrated)
  4. Save for Web, convert to JPEG, incorporate the sRGB color profile

  When you work in Photoshop the reds appear very well. When registering for the Web and previewing "Color Monitor" the reds are intense, when previewing 'Internet Standard RGB (No. Color Management)' the reds appear very well. The final appearance of fine recorded images with the exception of when displayed in Internet Explorer, which supports embedded color profiles - color management.

  Shooting JPEG can certainly be beneficial for the size and speed, although with improvements in conversion raw in a few years it becomes harder to justify.  But if you expose just conversions in camera can be very beautiful.  The camera manufacturers do a decent job in their chips.

  Your sounds of workflow practices, but one thing you know may not be not is IE use NOT your monitor profile, so what you see in Internet Explorer is incorrect to 100% of the time.  He only reads the profile of your image.

  In other words, Internet Explorer is not properly managed by color, unless you have a monitor set to display accurately in the profile sRGB IEC61966 - 2.1.  Microsoft seems to have no intention to fix it either, which is a shame.

  I suggest to view your images in Firefox or Safari, who read your color monitor profile as well as the profile of the image.  Firefox can even be configured to display the elements of the web page in a mode of color management.

  -Christmas

• Can log in fine, are there of the editable regions, but ice allow me to change!

  Hello

  I'm using version CS4 of ice and DW. I have configured my site properly, and it connects fine. I also created an area of text editable by the ICE and made sure that all the options (fonts, hyperlinks, etc.) have been verified. I have downloaded the page (index.html) and connected and configured everything, then click 'edit page' - of course, my changeable ice is selected, and I can move the cursor inside...

  ... However, I can't edit any text or add hyperlinks and images... the buttons are grayed essentially, and I have no idea why. I am at a loss. Help, please! Thank you

  Nathan

  PS. my site is www.drunknomad.com

  In DW4, select the DIV you want to make editable... then you must select at least one option in the properties and allow it to be editable.

  

  In its current form nw, you have nothing selected. If 'Check you all' it will change the line in your code for:

  Good luck

  -Tom

• Why can't I edit (cut the lines/words/phrases) in PDF files on my laptop. I even downloaded a software, but are still unable to edit?

  I want to know that I can not change (cut the lines/words/phrases) in PDF files on my laptop... can u help please...

  I have downloaded even hv a software, impossible to do?

  Hello Jonathan New Zealand,.

  Addition information of Santosh, please let me explain further.
  If you have only downloaded a PDF reader software as Adobe Reader which can be downloaded for free, you can only read the file you cannot change the file. You need to download or buy PDF Editor so you can edit and read the PDF file.

  Hope this explains a little further.

  Marilyn

• Some of the windows home CD files are necessary .___Please home edition insert windows CD-ROM into the drive selected below, and press okay.___E:\i386

  I need the file i386 install languages for Japanese and other oriental languages on my computer. I do not have the disk and I don't know where to download them from the site. It says browse and I know that there is a file i386 on my computer but I don't know which one to choose.

  I want to only download the East Asain languages for Japanese and etc. Thank you for your time

  Hi Alpha_Q,

  You are able to install? I386 files are also saved in your pc under C:\WINDOWS\ServicePackFiles\ServicePackCache

• Are still the basic editing tools in Photoshop Elements 13?

  I have Photoshop Elements 8, I used a long time on my Windows 7 desktop.  I just bought a laptop Windows 8 and was able to load 8 items on that.  But, I notice some wobbly editing quirks, so I'm getting ready to buy the latest product which is no longer compatible with Windows 8.

  In everything I read everything that is of 13 elements, I do not see the basics (cropping, cloning, text boxes, resizing, improve color or lighting, etc.).  Yet these basic tools in Photoshop and they still use symbols familiar tool is easy to use?

  Thank you!

  Either way, your best bet is just to download the trial version and see for yourself if you think is as easy as PSE 8 PSE 13.

• I recently bought 13 Photoshop elements for windows. My Version Set commands are not alive.  They are light gray both edit and display in the media section of the Organizer.  How can I make them work?

  Everyone knows this and if yes, how did you it works?

  PSE13 presents a new exhibition of miniatures: the speculative point of view. It is active by default. The thumbnails are resized to fill completely the 'media' section; the positive side is that it shows more thumbnails or larger; This is very useful for Visual browsing and research. But it masks the texts (name of file...) and version sets icons.

  Just go back to the old 'detailed view' in the view menu or remember the shortcut: Ctrl D. Your choice will stick the next time.