Are made and shipped to the United States at the Canada Apple books and so have shipping and additional costs due to the change of currency?

Similar Questions

• Are bundle and unbundle costly operations

  Group, ungroup, group by name, ungroup by costly operations of name if used in a loop. I use a beam pass/get data to a Subvi. So I need to unbundle the wire pass to a Subvi and then bundle the wires coming out of the slot - VI and that feed into a shift register. I can't do the bundling and unbundling outdoors because of the shift register I need.

  Thank you.

  sharmaa wrote:

  Group, ungroup, group by name, ungroup by costly operations of name if used in a loop. I use a beam pass/get data to a Subvi. So I need to unbundle the wire pass to a Subvi and then bundle the wires coming out of the slot - VI and that feed into a shift register. I can't do the bundling and unbundling outdoors because of the shift register I need.

  Thank you.

  Not necessarily. It depends on what you do with what you are bundling and unbundling.

  I think that the best resource I can offer is this thread where Dr. ONeill and I investigate on this question over a series of days.

  Caution:

  That the thread is NOT a reading lite. Take little by little and made frequent breaks to avoid brain overload.

  Ben

• 11g: contextual events - how I fires on the change of currency?

  Hello!
  
  After posting a question here: 11g: bounded task flows, need help and advice!
  I read the article on http://technology.amis.nl/blog/3365/adf-11g-how-events-in-one-region-cause-other-regions-to-refresh because I need to refresh region B when the user selects in the region A.
  
  Now, the comments in this article suggest that contextual events are the mechanism built for that use case. So I tried that first. Online help suggests that this is what I need.
  
  I have read online help and created an event and defined a producer and consumer card in the case where in the page of def. in the parent aid now shows how to raise the event when a methodAction binding is executed. But I need to raise the event when the user selects a row in the table of A region.
  
  1. How do I do that? Where do I put the event? Aid says it is possible, but does not show how. Add a selection listener to support bean and call the event link from active methodAction from there? Or is there a better way?
  2. I feel, that - when I use the event to call the ExecuteWithParams method binding consumer - just the VO of the consumer query is executed. That's great. But how to reset the stream to the original action? Just refresh the VO is not enough. I need to reset the stream to the original action (showing a view).
  
  I read http://www.oracle.com/technology/products/jdev/tips/fnimphius/taskflow_in_popup/taskflow_in_popup.html and now I'm completely confused. Use the input parameters or events? If I use events, how to reset (refresh) the task flow?
  
  Thank you
  
  Sascha
  
  Published by: Sascha Herrmann on October 19, 2008 15:33

  Sascha,

  prices area A action B the same transaction? If so and the contents of box B is a dependency of the VO used in A so you have contextual events at all. So if I guess this A region contains a list of departments and region B the employee table (where DepartmentsVO is the parent of EmployeeVO) then do the following

  -Navigate to the definition of region B region in the file pageDef
  -the right mouse context menu allows to add parameters and then a parameter (for example changeIndicator)
  -thread the parameter changeIndicator to the current line of DepartmentsVOIter key str (it's an exposed method directly on the iterator)
  -Set the region to ifNeeded binding refresh
  -set a partial trigger on the regionB to point to the departmentTable for the region is updated whenever the table changes line

  The parameter that you added just does nothing except it tells the region that binds the region needs to refresh. You that he point to the key of the iterator Department line because it provides the changed value.

  If regionB VO is not dependent on the DepartmentVO, then you need create a setting on the taskflow bounded, which takes the value of changeIndicator to write it in pageFlowScope.currRowKey. Then create a currentRowWithKey method that is defined as a default activity and it wire up to pageFlowScope.currRowKey

  Frank

• I am not happy with the new menu bar. I made a mistake in the change. Want to use the button refresh or open a new tab when requested without

  I made a mistake some how. I'm not the best a computer news as the new avg with the research changes. I want to return my old menu bar. I want to be able to open a new tab without going through an open search window. I don't like new tiny 'file above it don't help me. I want the option to click the Refresh button bit. How to get back to what I had before?

  I don't know what happened to your menus and toolbars. Has this happened after an update of Firefox, or a change in your add-ons?

  (1) you can switch between the Firefox button orange with its abbreviated menus and the classic menu bar, by using the following text:

  ALT + v (open the menu Classic view) > toolbars > Menu bar

  (2) in the new tab, you wanted it is empty? Are there currently AVG research? If you want to get rid of the search for AVG, you probably have to disable to remove one or more modules from here:

  Orange Firefox button or classic menu Tools > Modules > category: Extensions

  Does make a difference?

  (3) the reload button is nestled at the end of the address bar, after the star icon and the drop-marker. If you prefer that your button to reload on the bar itself, you can do that using the personalization feature.

  ALT + v (open the menu Classic view) > toolbars > customize

  In order to avoid the button reload to slip into the URL bar, you can perform the following actions:

  • Move the button reload for the left side of the address box
  • Move another button between the address box and reload
  • Move another button between the reload and stop buttons
  • Reverse the order of the reload and stop buttons

  You can get as you wish?

• Can I get an English version of my simplified Chinese key I bought in China? Now, I live in the United States and need to re install my OS.

  Product key for Vista English version.

  Hello

  I bought my computer in China, and the product key is for vista Version of simplified Chinese.

  And now I'm living in the United States, my computer broke last week,

  I have instored a new hard drive and I need to reinstore the vista system.

  Can I get the product key for the English Version of the Vista system? or I have to buy?

  Thank you!

  Hello

  I bought my computer in China, and the product key is for vista Version of simplified Chinese.

  And now I'm living in the United States, my computer broke last week,

  I have instored a new hard drive and I need to reinstore the vista system.

  Can I get the product key for the English Version of the Vista system? or I have to buy?

  Thank you!

  You must purchase the English version. It will include a product key.

• What are you doing - warning: the United States-centric

  It is now in the Memorial Day weekend in the United States. Who you serve?

  We have looked into the sides, but decided that the Marinating time was too long for Sunday night. Instead, we opted for Brats smoked on the pepper whole wheat breads, sauerkraut and grated cheese (Note lack of capitalization on cheddar). Sides will take place tomorrow night.

  Matching Brats tonight with a Zinfandel AZ, however it probably is not available outside of the State of AZ.

  Not sure what will go with them to stop, but think a Syrah Santa Clara, or maybe a great Pinot Noir.

  Hunt

  you know how sometimes you write poetry when you're happy, you ate a good meal... It's a party... you feel sorta 'be happy '?

  So, here's my poem...  I just did this.

  ------------

  I wish an aquarium

  I thought I was a fish
  an aquarium
  in a bowl

  a lucky fish... still alive
  Despite ratings

  in the laundry room theres a fish
  Sounds just like me

  over time

  a long time

  really a lot of time

  Whew... lucky me

  ---------------

  PS. Fish of the Gulf Coast will have any gift you want to contribute to "...". fill in the name of your favorite charitable organization... »

  Stem

• Satellite A300 - Can ASP deliever AC adapter for my address to the United States?

  Hello

  I have the international limited warranty on my laptop Toshiba Satellite A300... I am currently in India...
  My AC adapter / CC gave me hard to the ppl of support center said that they replace it... but it'll take 4-6 weeks to arrive from Singapore...

  Now my problem is that I go to the United States for studies and I'll be leaving in less than a week...
  They can provide the ca adpter in my place in the United States (or the service center closest to my place so that I can collect in the United States?... or can they redirect the adapter from the center of service in India or Singapore itself...)

  Please answer soon, his brother very urgent I

  Afonso

  Hi mate

  I m wondering why you post here in the forum
  How should - does anyone know what the ASP?

  You should get in touch with the people who would replace the AC adapter and should organize more details and handling

  In my opinion it's shouldn't be a big problem to send adapter to another address or country but you will have to bear additional cost

  This is my personal opinion...

• ProBook 6570b: drive bracket HARD and Windows 7 due to the failure of the HARD drive - now no Internet connection

  Hello

  I had to install a HARD drive of second-hand because of failure - 4 weeks out of warranty.

  I then installed an old copy of Windows 7 2009 I had no backup discs.

  My question is how to find the good network drivers on the HP site I've tried a few and they are no be accepted.

  The product ID is H5E77ET #ABU

  BIOS 681CE worm f.45

  S/no available if necessary.

  I hope someone can help as its my daughters machine and she needs for UNI.

  BTW - a number of other drivers appears to be missing like Ethernet and USB

  You are the very welcome.

  If you live in the United States or in Canada, please call 1-800-334-5144, to order a set of recovery disks.

  Have the serial number handy to give to the customer service rep.

• CS5 installs like English (International), but I want English (United States)

  I bought CS5 in June of http://www.SoftwareMedia.com/ . Open my libraries predefined defaults to files instead of en_US en_US, and when I create a new documents they are created in British English, although I chose American English in my preferences. I am not sure, but I don't inadvertently choose English (International) to installation, my 1st?

  I did a complete uninstall of CS5 and a reinstall, this time making sure to choose the language: English were that I could, but the problem persists. My menus all read in the English American (color is spelled the American way, etc.), but replacing, as soon as I get my serial number, the words ' English: International "are represented, and there is no place to change.

  We bought 4 additional copies of the same provider at the same time, and those who have installed these copies are not having the same problem. What should I do to have my copy install as the English of the United States?

  I want to install on a Mac Snow Leopard 10.6.8. Please see 2 screenshots below for reference. Thanks for any help.

  -Erin

  

  

  Some files preferably holds your previous value. You can try to search preferences and deleted. You can try to uninstall (disable all first to stay on the safe side). Then use the clean script: http://www.adobe.com/support/contact/cscleanertool.html. Then check it twice:

  Go into Library/Preferences/AdobeSystems ditch this

  Go to Library/Preferences / (ditch what you see there) and all the com.adobe. plists.

  Come on in/Library/Application Support / ditch everything you see related to Adobe (Adobe, Adobe Systems, Adobe PDF).

  The repetition on your library user, ~/Library/Application support ~/library/preferences folder.

  You can now delete anything and everything about Adobe. Then you can re - install and re - activate. All in all an entertaining afternoon. Something I did recently to get CS 5.5 installed correctly.

• How to remove the warning "do you want to save the changes to investigation.pdf before closing.

  Question: To remove the warning "do you want to save the changes to investigation.pdf before closing.

  I created a file of pdf XFA (using the LC Designer 8.2) to view this issue

  I can't attach PDF file. Without attaching the pdf file, it would be difficult to explain.

  Click event js:

  function activateUser() {}
  var PDFVersion = xfa.host.variation + xfa.host.version;
  xfa.host.messageBox ("registered button click event");
  XFA. Form.Form1.sendForm.welcomeMsg.Presence = "invisible";
  XFA. Form.Form1.sendForm.successMsg.Presence = "visible";
  Event.Target.Dirty = false;
  };

  docReady event js:

  function displayInfo() {}
  var res =xfa.host.variation;//Added this line to display the successMsg
  xfa.host.messageBox ("docReady event recorded");
  XFA. Form.Form1.sendForm.welcomeMsg.Presence = "visible";
  XFA. Form.Form1.sendForm.successMsg.Presence = "invisible";
  };

  docClose js event:

  xfa.host.messageBox ("docClose recorded event");
  Event.Target.Dirty = false;

  Steps to get the caveat:
  (1) open the attached pdf using Acrobat Professional.
  (Bouton 2) click on registration to confirm.
  (3) now close the document and the Acrobat gives a warning "do you want to save the changes to investigation.pdf before closing.

  The XFA pdf summary:
  It has two text fields. DocReady event field has done this & field B is rendered invisible.
  The button click event of the field made invisisble & field B are made visible.
  Closing the pdf should not raise this warning message.

  My Efforts:
  (1) found a property in js adobe docs.
  Event.Target.Dirty = false;
  It does not solve the problem.
  (2) I tried to put this logic in almost all the events listed in the designer, but I'm not able to solve the problem.

  Please help me solve this problem.

  Hello

  Change the visual appearance is dirty the screen, before all data are actually entered in the form. I've seen this before.

  I think that the docClose event is too late to have the sale/requiresFullSave script. preSave does not either, as this is triggered after the warning dialog is displayed.

  For a test, I would put the sale/requiresFullSave script in the layout event: loan. Not the most efficient, but he should do after changing the visibility of the messages.

  This could be interesting: http://cookbooks.adobe.com/post_How_often_events_fire_and_their_sequence-16547.html

  Niall

• Sony TV XBR55X850B purchased in the United States can be used in Europe? We are expatriates and goes back.

  Dear Customer Service,

  We would like to buy aTV Sony XBR55X850B to the United States.

  We are from Europe and temporarily stationed in the United States.

  In three years we goes back to Europe and wishes to continue to use the TV here.

  This model is compatible with standards in the United States and the Netherlands (Europe, Holland)?

  Thanks in advance for your answer.

  Best regards

  OLAF

  Hi opvanderkraaij, glad to hear that you're interested in buying a Sony 4 K TV XBR55X850B model number, you will need to take into account the following:

  1. Various countries have different power supply systems.

  
  

  2. Video format for broadcast and video display standards.

  For more information, you can also visit the links below:

  https://La.en.KB.Sony.com/app/answers/detail/A_ID/38878/p/61659%2C62766%2C93313%2C93963/c/65%2C75/kW...

  https://La.en.KB.Sony.com/app/answers/detail/A_ID/29914/p/61659%2C62766%2C93313%2C93963/c/65 %2C75/kW/PAL%20system

  If my post answered your question, please mark it as "Accept as a Solution."

• Im trying to buy photoshop but it keeps saying that its not available in my area. I am in the United States and in my area gets bad! I even updated to the United States, but it is not record the change!

  Im trying to buy photoshop but it keeps saying that its not available in my area. I am in the United States and in my area gets bad! I even updated to the United States, but it is not record the change!

  Hi Mariam,

  It seems that your ID Adobe was initially registered in Pakistan due to which it is not allowing you to make purchases in the United States.

  You can create a new Adobe ID, register in the United States and then it should allow you to make a purchase.

  Let us know if it works or not.

  Thank you

  Yann Arora

• My iPad is registered in the United States, but I live in Germany. I want to change it now to my German address. What are the implications?

  I bought my iPad 3 to the United States by giving a U.S. address. I had assumed (perhaps wrongly) that give my German address would be denying me access to the English user interface.

  I live in Germany and I have a iPhone5s that I bought here in Germany where I live.

  I want to "App PAYBACK" (which helps me to accumulate points when I shop here in Germany) to use on my iPhone5s , but when I search in the App store, I see only a Mexican version. When I tried to download this app on here https://www.payback.de/app

  I get the message "not available in the US store.

  When I communicate with the help of Apple, told me that, if I switch to my German address the Apps that I downloaded from the US store may not get an update whenever they are released.

  Are there other problems that I should wait if I move to my German address?

  Hello

  Go downstairs homepage itunes itunes page by Email support

  See you soon

  Brian

• Hi, I read your support page that the News widget is available only in the United States, the United Kingdom and Aus. When will it be available in Norway?

  Hi, I read your support page that the News widget is available only in the United States, the United Kingdom and Aus. When will it be available in Norway?

  Hello

  Just to let you know, it is a user to user community. You do not directly communicate with Apple here, so no one can say if or when Apple may have available in your area News widget, but what you can do is to provide feedback to Apple > http://www.apple.com/feedback/iphone.html

• Shows incoming calls to the United States instead of the city and the State

  IiPhone 6plus, IOS 10.  Incoming calls from unknown number of shows in the United States instead of / the State of the city. How can I fix this. Thank you

  Settings > general > language and region > region = 'United States'... assuming that is where you are.