Are bundle and unbundle costly operations

Similar Questions

• Are made and shipped to the United States at the Canada Apple books and so have shipping and additional costs due to the change of currency?

  Are made and shipped to the United States at the Canada Apple books and so have shipping and additional costs due to the change of currency? A book of dollar $50 USA could go to over $ 100.

  Apple print products are quoted and charged in the local currency

  and the calculation of your Exchange rate is whack too - the CD is $0.77 USD - no $0.. (50) but the exchange rate is not serious since quotes and fees are in local currency

  LN

• I have an iPhone 6 and an iPad Air both have always been updated you are prompted and are therefore currently operating on 9.2.1. It just says: update could not be completed, and that was in the 11-15. I pay for extra storage if this isn't the issue...

  I have an iPhone 6 and an iPad Air both have always been updated you are prompted and are running 9.2.1. I can't get either do an iCloud backup, he repeats to me just last backup could not be completed. The last successful backup has been in November 2015. I pay for most large storage storage account is not the problem but, the fact I pay for cela and cannot use it is very frustrating = / I really need to get my backup iPhone I have a few important pictures there. I have read other posts, but nothing useful there. Is this a problem in one of the updates at this time or some other interferente app? Or? Thank you...

  Welcome to the Apple community.

  Please check that your device is correctly connected to the wireless internet (settings > wifi) and is plugged into a power source, check also that you have enough space in iCloud for your back upward.

  You can check the space available in settings > iCloud > storage and the space needed for the next backup to the settings > iCloud > storage > Storage manage > backups > appliance > Back Up Options > next backup size (wait for the spinning until the gear icon).

  Assuming that you are eligible for iCloud upward, you should try a forced first stop, hold down the buttons side in top and home together until the unit stops, then restart by pressing the side/up button.

  Then, try to connect the device to a new location (different WiFi network)

  If your backup continues to fail, you can try to disable the backup on your mobile device (settings > iCloud > backup), reboot the device and then turn on BackUp on new.

  If this help not disable backup again, remove your existing back to the top of settings > iCloud > storage > Storage manage > backup > this device (scroll down) > delete backup, restart the device and then turn on BackUp.

  If you are unable to make a return to the top, try to connect on iCloud (settings > iCloud (scroll down) > Sign Out (you will need to enter your password at this point), restart the device and sign in iCloud to settings > iCloud.)

  The next thing to try would be to restore your network settings. (Settings > general > reset > reset network settings)

  Reset your network settings will erase your cell phones and wireless network settings, including saved networks, passwords for wifi and VPN settings, that you can use. It will affect to the Internet but will not be an impact on telephone services because these settings are automatically configured by your carrier. It may take a few moments to enter again all your network settings, but it shouldn't cause you any major problems. If you are comfortable re - enter your network settings, you can try this step earlier in the troubleshooting procedure, i.e. after the forced shutdown suggested above.

  If this does not help, try to disable some elements for the back upward in a model to try to establish if your problem is caused by specific data on your device. You can do with settings > iCloud > storage > storage management > backup > appliance > Back Up Options.

  If you are still not able to perform a backup from iCloud, you can try to restore your phone which you should do by making an iTunes backup via your computer and restore from that.

  Be able to go back to the cloud can be very useful, especially if you have access to a computer or rarely have access to one, however unless you need specifically to use iCloud to go back, you'll find a backup on iTunes much more convenient and possibly more reliable. However if you save up to iTunes be sure to encrypt the back upward if you want to keep your data on health and passwords etc.

  More on v iCloud iTunes backup

• Error "the dynamic disks are not supported by this operating system." what configuration Raid 0 (striped) readers.

  I have my operating system installed on a single disc, and I bought two additional discs I want to implement in a Raid 0 configuration. I'm going to administrative tools > computer management > disk management > right-click on a single disc and select the new striped volume > add the second drive and fill the dialog box until I get to the part where the formatting is supposed to start. Then I am stopped by an error that says "the dynamic disks are not supported on this operating system."

  Who says that hard drives, I bought are not compatible with vista interlacing or it says that vista can not the striped disks. What is the problem?

  You need to configure raid 0 before installation of win, you cannot "convert" s simple drive to the part of a matrix of blocks.

  In general this is not a good idea to use software raid, too a overload the CPU. If you want to raid, invest in a dedicated hardware raid card, which for a decent cost probably more than your motherboard

• Computer performance are slow and unresponsive in the middle of the running applications

  Original title: Volsnap error, VSS, registry handle leaks, the drivers won't load is not etc.

  Little by little over the last few months, my computer has been slowing down, suddenly "not responding" in the middle of a program and a few other oddities.  I can't identify when this started because he was progressive.  I had to replace an old drive SSD C and when I did, I also bought a new copy of Windows 7 Prof 64 bit SP1.  Drive C is now SATA 6.

  Specs are adequate, CPU i7 930, 16 GB ram, 2 7200 1 TB WD drives each, 1 WD 'green' 2.5 SATA 6 GB, an Intel SSD SATA2 M225 and a Corsair Force SATA 6, which is the 'new' drive C.

  First mistake, as mentioned above is:
  Log name: System
  Source: volsnap
  Date: 28/08/2012-06:46:26
  Event ID: 8
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: mg - PC
  Description:
  Flush and hold writes operation on E: has timed out while waiting for a written statement of the volume control.
  The event XML:
  
   
     
      8
      2
      0
      0 x 80000000000000
     
      131589
      System
      mg - PC
     
   
   
     
     
      E:
      000000000200300000000000080006C 0000000000000000005000000000000000000000000000000
   
  

  Following error, which is quite common VSS:
  Log name: Application
  Source: VSS
  Date: 27/08/2012-22:38:52
  Event ID: 12341
  Task category: no
  Level: WARNING
  Keywords: Classic
  User: n/a
  Computer: mg - PC
  Description:
  Volume Shadow Copy WARNING: VSS past seconds 0x000000000000002b try to rinse and keep the volume \\?\Volume{51e5830d-560c-4d2f-9ed8-343e5dbe5b8c}\.  This could cause problems when the other parts in the cliché of the time-out value for the phase of release-written, and it can cause the creation of snapshots to failure.  Try again when the disk activity is less can solve this problem.

  Operation:
  The execution of an asynchronous operation

  Context:
  Current status: flush and hold writes
  Volume name: \\?\Volume{51e5830d-560c-4d2f-9ed8-343e5dbe5b8c}\
  The event XML:
  
   
     
      12341
      3
      0
      0 x 80000000000000
     
      73849
      Application
      mg - PC
     
   
   
      0x000000000000002b
      \\?\Volume{51e5830d-560C-4D2F-9ed8-343e5dbe5b8c}\
     

  Operation:
  The execution of an asynchronous operation

  Context:
  Current status: flush and hold writes
  Volume name: \\?\Volume{51e5830d-560c-4d2f-9ed8-343e5dbe5b8c}\
      2D20436F64653A20434F524C4F564C4330303030303239302D2043616C6C3A20434F524C4F564C4330303030303233332D205049443A202030303030323632382D205449443A202030303030353532302D20434D443A2020433A5C57696E646F77735C73797374656D33325C76737376632E6578652020202D20557365723A204E616D653A204E5420415554484F524954595C53595354454D2C205349443A532D312D352D313820
   
  

  Following error - register cast handles
  Log name: Application
  Source: Microsoft-Windows-user profiles Service
  Date: 30/08/2012 20:07:49
  Event ID: 1530
  Task category: no
  Level: WARNING
  Keywords:
  User: SYSTEM
  Computer: mg - PC
  Description:
  Windows detected your registry file is still in use for other applications or services. The file will be unloaded now. Applications or services that keep your registry file may not work properly thereafter.

  DETAIL-
  Register of the 1 handles user are escaped from \Registry\User\S-1-5-21-3328621373-938311138-4019764245-1001:
  800 (\Device\HarddiskVolume2\Windows\System32\winlogon.exe) process has opened \registry\user\s-1-5-21-3328621373-938311138-4019764245-1001-cles

  The event XML:
  
   
     
      1530
      0
      3
      0
      0
      0 x 8000000000000000
     
      74995
     
     
      Application
      mg - PC
     
   
   
      Register of the 1 handles user are escaped from \Registry\User\S-1-5-21-3328621373-938311138-4019764245-1001:
  800 (\Device\HarddiskVolume2\Windows\System32\winlogon.exe) process has opened \registry\user\s-1-5-21-3328621373-938311138-4019764245-1001-cles
  
   
  

  Next error - another problem of registry on the leak and be in use
  Windows detected your registry file is still in use for other applications or services. The file will be unloaded now. Applications or services that keep your registry file may not work properly thereafter.

  DETAIL-
  Register of the 1 handles user are escaped from \Registry\User\S-1-5-21-3328621373-938311138-4019764245-1001:
  800 (\Device\HarddiskVolume2\Windows\System32\winlogon.exe) process has opened \registry\user\s-1-5-21-3328621373-938311138-4019764245-1001-cles

  Last error I hope - system boot or boot startup failed to load drivers
  The next (s) starting or starting system could not load:
  UimBus
  Uim_IM
  Uim_VIM

  I apologize for this long post, but I thought that some of them might be related, and I'd appreciate any help I can get like this had been a machine very good and fast until the last month or two.

  33000

  Hello
  The three files that does not loaded at startup proved a Paragon backup facility that I had deleted.  I found in the registry and is more had this error.

  Slow and sudden episodes of "not responding" continues in safe mode, safe mode with network and boot.

  Mr. Fixit noted that I had too many programs loaded on startup that I already knew and will work hard to stop.  It has been useful in this gave me a list of the programs that did not need to start.  Some of this list was a distant base such that suggests my AV does not need to start, but some of it was useful.

  I then started to keep track of programs that seemed more likely to slow down or freeze the machine.  I reduced to one of my drives 3 1/2 inch WD 7200 and my 25 M Intel SSD.

  I ran Intel SSD toolbox and it showed no errors and no updates.  Estimated of life was about 95% and I had the car for 2 years.  There is an option to click that says "SSD Optimizer", and I suspect it is similar to a manual pad because it is one of their first records.  I "optimized" and it was immediately faster.  Intel said to do once a week or two and I never did.

  I ran HD Tune Pro on the WD and it showed a bad CRC so that a warning on the drive, which is less than a year. HD air said the drive is bad OR a cable is bad.  I had a backup, Acronis Disk which took most of the data and I also had the cloud with versioning backup.

  Knowing that the food had been replaced by a technician who had twisted power cables, because most of the readers had been asked in reverse, I attacked this first.  I turned every drive so that the connection of the power supply has been on the same side and reconnect the cable after doing my best to straighten out and flatten the wire.  I then installed a new SATA cable on the WD drive in question.

  Then, wanting to be done with it once and for all and ensuring that I could save between Acronis and my backup of cloud, I used the command line in Administrator, then to Drive E tools mode, error checking.  I ticked the boxes: analyze and attempt to recover bad sectors and automatically fix file system errors.  A reboot and the process had started.

  When you are finished, I seemed to have a catchy machine and some of the programs which often hung, is done in two days.  Programs were pretty much intact, but most of the files had been erased from the disk.  I have restored all wiped files and files of Acronis and the cloud and everything seems to work perfectly.

  Unable to help me, I ran HD Tune Pro and made a mistake (not fast) full scan on the E drive.  She came back without error.

  I know that this drive can fail again, and above all, I couldn't have been this aggressive if I had not had 2 backups.

  Do you think it will fail again?  I decided that, if so, I'll get another SSD (or two) to replace.  Although it will cost you much, I fear that hard drives are not very well made and I don't want to go through this again - and maybe not be so lucky.

  Thanks for your help and I'll post again if it fails in the near future.  Someone knows something about the new SSD Plextor?  Or would you go with Samsung?

  Thanks again.

• The folder "inbox" for one of my email accounts where does not appear on the screen, but all of the messages are there, and I can click on each one to see...

  I've seen other people having this problem too and their problem solved by using the link "file repair". I tried this also - no effect...

  It seems to be a pure display problem, as all emails are there, and when I click on a specific location where a specific e-mail was supposed to appear, I can open the e-mail OK. I have no insight of what is in my Inbox. When I keep my mouse on the account of the column in the left window, a little black watch too, with all the new messages being listed.

  I don't have this problem with one of my email accounts has seven. All the others work fine, and this is also several weeks until what stopped it a few days ago.

  Restarting the computer does not help.

  I use Ubuntu 14.04 as the operating system.

  Try this:

  Select the Inbox that shows an invisible list.
  Click the icon of choice of right column header and select 'Reset columns by default'.

  It worked?

• How can I find out what files on my drive D: (recovery) are those who are critical and which are not?

  I have a desktop computer with the Windows Vista operating system a1720n Pavilion. PC health tells me he is too little space left on my D: drive for optimal operation. He tells me to remove non-critical files; But how do I know what files are critical and which ones can I delete or move to the bigger drive C:. Or can I somehow expand the D: drive without messing things upwards? Norman

  Hi Norman,

  Please see the document on this subject at the link below.

  http://support.HP.com/us-en/document/c01508532

  Kind regards

  DP - K

• In 2007, I bought an iMac G5 and my safari videos are slow and jerky. What can I do?

  In 2007, I bought an iMac G5 and my safari videos are slow and jerky. What can I do?

  They are cutting and slowly because the version of Safari running on 10.4 Tiger is very outdated.

  And it's not just v10.4 is the question, but most of the video content requires Flash. The minimum requirement for Flash is...

  • Intel Core™ Duo 1.83 GHz or faster processor
  • Mac OS X v10.6 or later version
  • Latest versions of Safari, Mozilla Firefox, Google Chrome and Opera
  • 512 MB of RAM; 128 MB graphics memory

• Companys keep the call telling me they are Microsoft and my computer to send them signals of error

  Original title: scammed

  Companys keep the call telling me they are Microsoft and my computer is sending wrong signals that I have been scammed by apturo for £145.00 already do I need help with my computer and these errors. Thanks much jam

  The game, 18 June 2015 13:01:55 + 0000, BobSummerville wrote:

  APTURO scam is alive and well... and I just fell for it.  I was scammed to the tune of $ 207,91 to solve a problem on my computer that did not exist.  Convincing, but aggressive, 'technician' called Microsoft Support had received reports that my computer had been compromised and that his company had the task to fix.  The malware to compensation would cost US$ 169.  I've stupidly it gave access to my computer for all 90minutes.  What he was doing right now that I don't know, but I just finished all my blocking bank accounts and change the passwords.

  It is not good enough, as far as I'm concerned.

  In addition to their money get on your part to do anything of any value,
  If you leave them in your computer, who knows what they were doing or where
  What confidential information they stole.

  So if you have done so, I highly recommend that you do both of the following
  immediately:

  1 do a clean reinstall of Windows.

  2. after reinstallation of Windows, change all your passwords.
  especially one of the banks or other financial sites. Once again, even do
  If you have just made.

  Since they have perhaps installed a recorder of strikes, changing just your
  Passwords may not be good enough.

• My documents and downloads are coded, and now the HP Support Assistant has stopped working

  First my 'docs' have been encrypted, now my downloads are encrypted and the "Support HP sat down. ' 'stopped working', when I try to open it, it is"encrypted", the '

  Recovery Manager"is also encrypted. Message is: 'looking', but do not get a reply box to tell me what the problem is.  Now I'm so frustrated!

  Help, please!

  Carolyn

  Hi Carolyn,

  1. what operating system is installed on your computer?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  3. you receive an error code or message?

  4. what exactly happens when you try to open my documents and file downloads?

  5. have you well any type of encryption, or if you are aware of what it is done on your computer?

  What version of the operating system Windows am I running? :

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Please follow the steps and the link:

  Method 1:

  Decryption of a file:

  1. Right click on the file you want to decrypt, and then click Properties.
  2. Click Advanced.
  3. Click to uncheck the checkbox encrypt content to secure data to decrypt the data.
  4. Click OK to close the Advanced attributes dialog.
  5. Click OK to close the Properties dialog box.
  6. If the folder contains files that it contains, the confirm attribute changes dialog box appears. You can choose to decrypt only the folder. But it will decrypt all the files currently contained in the file.

     If you want to decrypt the contents of this folder, click apply changes to this folder, subfolders and files, and click OK , then check the issue.

  If you are still having the same problem, follow the next method.

  Method 2:

  I suggest to start your computer in safe mode with network and run Microsoft Safety Scanner because it might be an unwanted virus.

  Step 1:

  Start your computer in safe mode with network and check the number: http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2:

  Scan your computer by using the Microsoft Security Scanner by clicking Download now:

  http://www.microsoftsafetyscanner.com/

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps.

• Why is compatible windows 7 with Medal of honor alied assualt and assualt pacifc and airborne, but not with Medal of Honor 10eanniversaire Bundle. and have xp and windows 7 can I play and keep the games on xp with windows 7 is installed

  Why is compatible windows 7 with Medal of honor alied assualt and assualt pacifc and airborne, but not with Medal of Honor 10eanniversaire Bundle. and have xp and windows 7 can I play and keep the games on xp with windows 7 is installed

  Hello
  Welcome to the Microsoft answers site.
   
  By design, the game is not compatible with windows7.
   
  You can also check with the manufacturer of game for any version upgrade of this game, which could be compatible with windows7.

  Yes, if you have the dual operating system on your computer, you can play and record games on xp, start the computer in Xp and you can play the game.

  I also invite you to visit this link to learn more about running the old programs/games in xp or vista compatibility mode.

  Here is the link:
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know if you have any questions.

  Thank you and best regards,
  Azam - Microsoft technical support.

• Computer says disk C and F are weak and memory Windows is very low. and I have the same thing in so many programs.

  I have windows xp home edition, he received from a friend. Tells me disk C and F are close to full. Make cleaning disc, but not enough. AND says the window is very low on storage space. Don't know what to delete and keep programs are

  http://Windows.Microsoft.com/en-us/Windows-Vista/preventing-low-memory-problems

  Read what you and answer a few questions about your system:

  1. What is your current antivirus?

  2.

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  You can change the personal information.

  3. look in disk management, how many partitions? How much free space on each?

  4. optimize your pc:

  Stanley Zhang tips

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  ·                                 MalwareBytes (FREE)

  ·                                 SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

• This disc contains a "UDF" file system and requires an operating system that supports the ISO-13346 "UDF" file system specification.

  I've seen other posts on this topic. Nothing seems to work, so I thought I would explain my situation.

  The machine is new. Win7 64 bit company. The problem I see is that I try to load some versions of Visual Studio on the new machine. However, none of the discs auto-run using my local internal DVD drive. They all have a Readme file with the message "this disc contains a"UDF"file system and requires an operating system that supports the ISO-13346"UDF"file system specification."

  I know that the discs are good, I used the on my old machine, and I can always use them on other machines I tested.

  The real kicker here is that I can plug an external USB DVD drive... and then the local drive starts to read the installation discs! It's like making this action allows something else in the machine.

  Also, I even restarted the machine mode of diagnosis (without external DVD drive attached)... and restart, the drive would read the installation discs. BUT when I do a full stop and then turn on the machine upward, the local drive gives me the same readme file. Again, it is as if something gets activated, and then reset to a complete stop.

  I am at a loss of what to check then. Real head-scratcher, because I know the drive works and the machine can recognize the drive and even read installation discs.

  I do not have the applications installed on the machine of DVD burning, so I don't think there is a conflict.

  Any suggestions are welcome.

  Thanks in advance!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums so the problems occurring on Windows 7 Enterprise.

  Forum TechNet Windows 7

  Hope this information helps.

• Windows installation encountered an unexpected error. Check that the installation sources are accessible and restart the installation. "The error code is:"0xE0000 100. "

  My antivirus and windows firewall was also automatically disabled and I was not able tun back on

  So, I tried to reinstall the windows operating system 7, but when I try to install, I get an error saying:

  Windows installation encountered an unexpected error. Check that the installation sources are accessible and restart the installation. »

  The error code is: "0xE0000 100."

  I think that some virus or malware is rampant in my installation of windows system. So, I want to know there is a way to solve this problem...

  Ideas or suggestions that anyone has would be greatly appreciated!

  Thank you!

  See if this post has resolved your problem: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/error-code-oxe000100-windows-installation/aea498e2-09c3-43aa-bfa5-c06e68b1ea0c

  J W Stuart: http://www.pagestart.com

• Exception handlers in bulk collect and for all operations?

  Hello world

  My version of DB is

  BANNER

  ----------------------------------------------------------------

  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi

  PL/SQL Release 10.2.0.1.0 - Production

  CORE 10.2.0.1.0 Production

  AMT for Linux: Version 10.2.0.1.0 - Production

  NLSRTL Version 10.2.0.1.0 - Production

  My question is, what are the possible exception handlers can add us in a bulk collect and for all operations?

  When we use for all, we add except exception and sql % bulk_exceptions. But apart from that what can we add to bulk collect?

  Kind regards

  BS2012.

  Save stores Exception all the exceptions that occur during in bulk in a collection of treatment and at the end of the most much treatment raises an exception. The SQL % BULK_EXCEPTIONS collection has all exceptions. It's the right way to handle the exception during treatment in bulk. And that's all you need. Don't know what else await you.