Area ID ospf ESG in form of IP address problem
Hi, I am trying to configure OSPF between the GSS and a Fortigate device, Fortigate use the id as a form of address IP ospf area, but when I try to configure the GSS with the same area as IP address id, I can't do that, because the webclient service do not allow me to write a point, same, I try to use the REST API but the reference says xml this area id is a number between 0 and a lot, that I don't remember, documentation of the NSX says we can configure the zone id ospf as a number or as an IP address, but I can't.
Any help?
There are a few videos online to integrate a Fortigate with a Cisco router. It shows that a configuration on a Fortigate 0.0.0.0 will establish links to a Cisco router that is configured for zone 0, due to the fact that OSPF sees real value in hexadecimal. 0.0.0.50 converting to 50 NSX area; 10.1.1.1 converts area 167837953.
This blog can explain a bit more: https://mellowd.co.uk/ccie/?p=910
Tags: VMware
Similar Questions
-
Are MS Word 2007 fillable forms in full and signed in one session using EchoSign?
Are MS Word 2007 fillable forms in full and signed in one session using EchoSign? I have a rental application form already developed and tested using controls inherited from text and the box on the Developer tab in MS Word. I need to have the prospective tenants to complete AND sign the form.
Hi Allen,.
In this case, we need to test the word document you send to eSign. I'm not if the conversion of PDF eSign process will make all fields of form from Word.
Please check my private message for more details.
Thank you
Abhishek
-
I bought two licenses adobe and I can't use them because they are expired, expiring 2017/03. I had this problem and solution still has the air of 15 days!
[Moved from the endorsement, general, all Adobe forums Lounge for a specific product - Mod support forum]
Hi Eugenio,.
It seems to be a problem of implementation.
Try wearing the same query in the General Photoshop Discussion where experts can help you.
Kind regards
Sheena
-
You are not allowed to add the e-mail address of your account and user already exists
Hi Experts,
My SAP CLM (Contract Lifecycle Management) System integrated system of Echosign by SAP itself and we test the functionality.
Everything works fine and I am able to send documents to the signature of the CLM system and the beneficiaries are able to sign the document and even get all historical information and the status of it.
But I am facing problems below 2 cases,
1. for a particular user, whenever the user sends the document to the signature, we get the error:-"you are not allowed to add that e-mail address to your account.
2. for another user,who already have created account itself, whenever the user sends the document to the signature, we get the error:- 'user already exists: [email protected]"" " ."
For question 1, I googled and found the link the specified item was not found. , who seems to have the answer, but unfortunately, this link seems to be outdated.
Any help would be great.
Thank you
Uday Chassagne
Hi Uday,
I sent you a message in response. Please check and provide the requested information.
-Usman
-
Muse CC tutorials - I'm looking at them, but they are not loading. Does anyone else have this problem?
Looks fine now, could you please recheck and confirm.
-
Restoring a area 51 ALX to its former glory.
Well later I picked up a little uncommon Area-51 ALX chassis. It had been hacked on way more and I knew before I bought it.
Ive got most of them back together and have to other desktops Alienware helped in this area.
the only thing that I can't seen to find out what provision is ordered to hard disk platters in a side? When I had all 6 trays were missing and I took 6 nine trays. I looked through the user's guide and service manual and do not see anything that stands out who said what is the order. does anyone know what order they came from the factory?
something else that I can't find a MIO to fan control cable. It seems to be elusive. Anyone know where I can get one to?
Good evening. I don't have the time I can devote to see your start to finish to its former glory. Can I chip - in a pointer or two only. I'm familiar with this computer, but cannot make the connection between the words: MIO to fan control cable & whatever it is you have in mind you are looking to aqwire. On a side note, I moved information valuable swap in this pair of terminals:
We invite you to browse photos or find one of yours, post / report any cable you need & I may be able to direct you to obtain a. Or better, at least describe it. If not those below, help me help you...
-
Several areas with a single Login Form
Hello, I created a login form and 20 different secure areas. I need to redirect users to their own staff secure automatically once that they connect (without the need for them to choose the secure area) can you please let me know how this can be done? Thank you very much
In the form action, change IDZone-1.
In the admin, if you use the tool box and insert the generic form securezone you will see which does exactly that.
-
How to extract the data in a grid format in an area of the bean in forms 6i?
Hello
I need help from all the gurus and the experienced people in forms 6i. I'm currently building the shape that will have certain text fields and a bean area that displays the records that I had entered. Suite to the essentials is the basic form structure, I am developing
1. There will be a search form that will have two text fields 'Emp ID' and 'Name Emp' and two buttons 'New' and 'find '.
2. There is an alternative, which will have an area of bean that allows to display the following columns in it in the form of a GRID
a. Emp ID
(b) name of the Emp of
This form will be also two 'Emp ID' and 'Name Emp' text fields.
3. when I press 'New' in the search engine so the second form should open and it will be empty. I can enter data into text fields and save the form. The area of the grid (the bean area) must be empty.
4. when I reopen the search form and enter the 'Emp Id' I just created in the previous step and click on the "Search" button then the following form should open and the "Emp Id" and the text "Emp name" fields must be populated with the data that I created in step 3 and the bean area must also display the record in the form of a grid.
I'm ok with all parties except the part of area of bean. Can you help me hpw to develop the form with the area of the bean and extract data when wanted and display as a grid?Take a look at the link I provided. Francis already has an example of implementation of a Java data grid on a form. The direct link is: http://forms.pjc.bean.over-blog.com/article-1830062.html
Craig...
-
where are stored the data planning forms?
If it is stored as a file on the server with a file extension
or are they completely stored in the db tables?
We want to use Forms data for version management and moving from DEV to QA forums etc.
is it possible to do this?Planning forms can be exported (.xml) and imported into the target of planning an application.
FormDefUtil.cmd is used for this purpose, it is present in the \Planning\bin folder
Goto the location of stations (via cmd prompt) and use the syntax "formdefutil
. The files would be saved in the same location and can be imported into the target of planning an application using the syntax above.
I hope this helps.
-
When you try to send a message to a group set up in my address book, I get an error message [group name < updated the group description >] is not an email address valid because it is not the form user@host. You need to correct before sending the e-mail message. Thunderbird has apparently taken the description section and tried to treat it as an email address. In doing so, it changes the description of and the original format [names, name2, name 3] (with the exception of the hooks) of [< name >, name2, "name 3" >].
The list of mail has worked with no problems until today.
Zenos. thanks for the suggestion. Although he did not provide a direct solution, he pointed me a. Being reluctant to try to re-enter an address book with more than 1,000 entries, I saved the book and replaced by a backup copy of a computer when I heard the e-mail function worked as desired. I had the same problem.
I tried to export the book to save what I could at least and ran into problems, I discovered since came from trying to export "all address books.
Then, I opened a copy of AB. File MAB in Quattro Pro, where I noted PS split the description section of the list of mail problem in separate cells, from commas in this description. I went back to the address book, removed commas from the description, and my group e-mail went out as gently as might be desired.
I would note that commas have been this likely description for 15 years or more and only now has caused a problem. I guess that's due to some changes in Thunderbird was last updated. Would be nice if we got warnings about this kind of change.
Answer to my problem: remove the commas from the description in the properties of the list. -
I get sent a lot of pdf on email for my ipad. They come to the top in the form of images on my email so I can only save pictures no ibooks. Is far from stop this? If so, how? also can you seal my pdf then one both of ibooks for and by e-mail. IM on the road a lot so need to know how to proceed if possible without a laptop.
Not very high on ipads!
Press the image, which is actually the PDF open, and then select copy to iBooks from the window that opens. The PDF file will open in iBooks. Then press the share icon in the upper left corner of iBooks, and select send.
-
What Toshiba preinstalled programs are safe remove in the form of my laptop?
Hello
This is probably the question most google on Toshiba laptops, but I can't get a clear answer so I thought I'd come to a forum. I have a brand new Toshiba Satellite P870 and startup is very slow, and the overall performance of the computer could be better.
In the list of stuff pre-installed below, I would like to know if there A) would make a difference in performance/speed and B) that I should really delete thePrograms:
Toshiba Assist
Toshiba Config Free
Toshiba Disc Creator
Toshiba Eco utility
Toshiba face recognition
Toshiba hardware configuration
Toshiba hDD protection
Toshiba HDD/SSd Alert
Toshiba Media controller
Plug-Controller Toshiba in Media
Toshiba PC Monitor health
Toshiba Advanced shift control
Toshiba Recovery Media Creator
TOSHIBA ReelTime
Toshiba Remote Control Manager
Resolution of Toshiba and Plug In for Windows Media Player
Toshiba Service Station
Speech of Toshiba systems Applciations
Toshiba Speech system SR motor (US) version 1.0
Toshiba Speech system TTs Engine (US) version 1.0
Toshiba supervisor password
Toshiba Value Added PackageI don't have not really met/used one of these yet and want to know which are worth keeping around, and that I can do everything right on remove.
any advice would be greatly appreciated, but I tried the Decrapifyer program and it really helped a lot.
Hi and welcome to our community.
If it is no longer question of google I really hope that we will find the final answer here. ;)
At first, I must say that each of us has a perhaps different view of this. Some of us want to use a tool of some and some of us don t like some of them is not possible to give a precise answer to your question.
In any case I'll start with my personal opinion, but first some general information. Toshiba recovery image contains many specific tools Toshiba and public services, as well as some additional software. Toshiba-specific tools and utilities are designed to help the user with full control for laptop and also the laptop owner to get useful information on updates.I repeat again, what I write here is my personal opinion and I want to just describe what I do.
I delete after clean install of OS of the system
TEMPRO, Toshiba ReelTime, Toshiba Service Station, and other things like links to eBay, or other stuff that is completely useless to me.
Toshiba listed specific tools are OK, but I put t need them. They start with laptop and sow in commissioning. TEMPRO and Toshiba Service Station are monitoring tools inform you about the new BIOS or driver updates. As I wrote it is very nice, but if the system works perfectly don't change anything.I'll go trough your list and write a comment short for each listed programs.
-Toshiba Assist very useful tool where you can find shortcuts to all the important of Toshiba and utility tools. Leave the shortcut on the desktop
Toshiba - Free Config - very useful tool for the monitoring of the network but not must be started with the OS. Don t he remove the disabe just in the starting System. You can start it when necessary.
-Toshiba Disc Creator useful, but not so important. Depends on the owner of the laptop. I put t use it.
-Toshiba Eco utility useful but for me personally not so advantageous. I removed it from the system. When I want to save energy, I just use the power of Eve plan Windows.
-Toshiba Face Recognition - nice tool to play but I don t use. It is removed from my system.
-Hardware configuration, one of the most important tools of Toshiba Toshiba. Check it out and don t he remove it from the system. -
How to add a download area of files within a form in Adobe Muse?
I'm building a Web site where I design & video editing work and I need to contact form so that people can download files for me to change, or send me pictures of reference for the design. Here is my website: Charter of Ben not completely finished yet.
Thank you
-Ben
Hi Ben,
Also take a look at the following threads
How do I create a file upload in the contact form
Adobe muse forms with ability to attach images
Re: Is it possible to add an option 'Upload Image' to a shape in Muse CC 2014
Let me know if you have any question.
-
APEX 4.0 'attributes of the element' field are ignored in the tabular forms
Hello
I don't know if I should report it as a bug, but first I want to ask around to make sure I don't do something wrong.
I noticed that no matter what attribute you put in this area (under the column attributes), when APEX generates your tabular presentation it not include the attribute you entered.
For example, I create a simple tabular presentation using the wizard and then I entered 'Attributes of elements' of one of the column (which was a textfield): style = "color: red;"
This piece of code was not the case to be found in any of the source of the page.
Can someone confirm this problem? Or maybe it has already been reported?
Thank you
Published by: reggieh on March 22, 2011 10:09Hello
Idea is that make you example and let us see source.
Seems in any case there is problem. Use jQuery and add your styles after that document is ready.
Something like this page run JavaScript when Page loading$('[name="f10"]').css({"font-weight":"bold","color":"red"});
Kind regards
Jari -
It worked very well some time, but now is broken. I reset everything on my desk to see if it was a question of database, but the desktop synchronizes very well.
There is a new version of Firefox Home in the app store (v 1.1) which should fix the problem. If you use Firefox 4 beta there is also a new version out or if you use 3.6 and synchronization module, there is a new version of this also.
Maybe you are looking for
-
How to save the pages that I open in a single window as a tab group?
In Internet Explorer, I am able to "Add current tabs to Favorites" for all my pages are saved as a tab group. How do I do this in Firefox?
-
How to ensure that the graph of the image is registered before you add it to a report?
Hello! I have a VI (comprehensive graphic image recording) that records the image of a graph with an invoke node. Then, I set this image in an excel report. However sometimes the image is saved and sometimes not. Usually, if I use a probe inside the
-
Missing USB. The Windows XP SP3 Installation INF file
I had problems to install USB devices and after a long-term task and it narrowed the field down, I discovered why. I don't have USB. INF file in my Windows/Inf directory. Annoyingly, my setup is not an I386 directory, and my XP disks are stored in a
-
Help 3 low buzzing sound beeps from my Mini netbook
Now, every 30 minutes or so, I get 3 low hum coming from my Mini 110 beeps. What doews he wants? What it means? How to stop that make me a nervous wreck? I see noting in any of my HP info that showed what IE.
-
Could not import title animation After effects Bridge
In Adobe Bridge, I click on an animation effect I like, and there's a window saying to burst: after effects error: could not import the random word shuffle in.ffx: unsupported file type or extension (0::1)If anyone is familiar on how to solve the pro