array variable error a number of clues or the beach size incorrect index overflow

Similar Questions

• How to determine the number of rows in the database and save the result to a local variable?

  Hello

  I'm a newbie in the use of TestStand, databases and SQL, and now I've met difficulties. I use TestStand 2014 (32 bit).

  I have a need to know the number of rows in a database and save that number in a local variable. I tried to practice using the database of the Types of step provided with TS. I tried to use the following in a SQL statement:

  Locals.NumberOfRows = ("SELECT COUNT (*) FROM TEST_TABLE")

  It returns an error: specified value is not the expected type. My goal is possible in this way, or I'm doing this completely wrong?

  -RautSa

  Thank you for your response, Norbert. I have a database of who wins new values at random, and sometimes I need the exact number of rows in this table.

  I managed to achieve my goal by using the SQL statement: "SELECT COUNT (*) as Rowcount OF TEST_TABLE", followed by a data GET operation, which records that number of lines in a local variable.

  -RautSa

• Error invalid number

  Dear Experts

  In fact, we have two packages one is master and another package which is subpart of the master package...

  Now the question is when I run only subpart, it works well. If run master and then to Subpart package and then the package is a failure...

  When I checked the error code is not a valid number. When I checked the code the error occurs during insertion...

  in my sql developer, I tried this insertion and I don't have any error invalid number.

  When I run simply Subpart together then I don't have this error number it runs successfully...

  When I run the master package calling this subpart, then I get an error invalid number.

  can you please how to debug or explore the problem...

  Best regards

  ASP.

  If you need a solution to get out variables for 11.1.1.5 to take a look at the procedure, generic, as demonstrated at the following link

  Variables to run wrong for older versions of the ODI | EMP DEV

  put this procedure in a package and run just before that your interface is running but after all variables have been defined and it will list the values of the variables in the operator and if all goes well to highlight the rogue variable

• Satellite A30: Error number (11122) cannot load the bitmap with recovery CD

  I have a Toshiba A30 I want to reformat with the recovery disk. I get that day then I get an error that reads:

  The error number (11122) cannot load the bitmap file. Height max = 100

  The hard drive has now been deleted and I can't sent this message to reformat.

  Can someone help me on this please.

  Hello

  Satellite A30 is quite old and I wonder what report you something like this after so long. I put t know exactly what is happening, but it will be interesting to know a few things:

  Have you noticed a similar problem before?
  Are you using the original disk or some copy?
  Is there a problem with the HARD drive?

  Please do a little bit more about these things.

• is it possible to display the number of elements in the array before you run?

  Hello

  At runtime, I can use the size of array function to check the number of items in a table. But it is possible to display the size of the array in edit mode (i.e. before turn the vi)? Thank you.

  dragondriver wrote:

  The table contains for some culster complicated. Yes, you are right, to help to see the last item will give an idea. But what I want is that anyway to show an indicator on the Panel before showing the dimension when the user changes the size on the fly.

  You can implement the whole thing (indicator of control and the size of array) as a X-control. They are fully operational in edit mode.

  I still don't quite see what you're trying to do? Why would it matter what happens in edit mode? A finalized VI must always be runnning during use. Use a state machine architecture.

• Error variables look a tab after race change the user interface

  Hello

  I have a problem which seems to be a bit like this:

  http://forums.NI.com/T5/NI-TestStand/error-viewing-variables-tab-in-runtime-operator-interface/m-p/1...

  The VI I'm running is a step of edit of a type of step. LabVIEW checks if the property 'Step.Setup.ReadMeasName' exists, fills a listbox with her if she does. An another ListBox with all available measure names will also appear on the user interface. The user has an Add and Remove button to remove the 'ReadMeas' list box measures or add them to it of the listbox 'MeasNames '. Several names may be added/removed according to what is selected when you press the buttons. Once 'Fact' is clicked the VI writes the 'Ref' to the list box "ReadMeas" property to "Step.Setup.ReadMeasName", using a node to set the value of property that is passed the TestStand sequence context. If the property does not exist it creates.

  The only time where I have any problem is when I try to remove items from the property, after it is already initialized (i.e. non-empty). In other words, if I run the VI of teststand, put several names as in "ReadMeas" click on done, again run the VI (already added names appear in the box when the user interface is displayed, LabVIEW reads "Step.Setup.ReadMeasName"), then remove the names. IF "ThisContext.Step.Setup.ReadMeasNames" has opened in the tab 'Variables' step when you try to remove the names, I got this message in the Variables tab: 'one or more errors occurred. Please save your work and restart the application. "If I'm careful of not having expaded 'ThisContext' in the variables tab, but check the property before and after the removal of names in the list it does not work properly, and there is no error.

  This isn't a big problem because I doubt that the end user will check to see that the property has actually filled, but I still want to fix the bug if possible. I installed the patch for TestStand 2010 and the .net Framework 4.0. Someone has an idea of what might be happening here?

  Thank you

  -Josh

  Josh-

  Looks like you are running in a known issue 193751, which is documented in TestStand 2010 and 2010 SP1 known issues list. It is a problem that we intend to fix in a future version of TestStand.

  I hope this helps and I'm sorry for any inconvenience this issue may cause you.

• CompactRIO RT (:-65589) error code: error or warning occurred when writing the following shared Variable)

  Hello

  is anyone know this error Code:-65589?

  This error says:

  Shared in environmental_logger.vi variable
  This error or warning occurred when writing the following shared Variable:
  CompactRIO Target\Mod2\DO1 \\RT
  \\localhost\Mod2\DO1

  My cRIO9073 has 3 modules:

  MOD1: 9203 HAVE,

  MOD2: 9472 DO,

  Mod3: 9265 AO.

  When I delete all States and run only the first "init" State where I put DO0 = true and DO1 = false, I get this error. What could be?

  I think we need more information about your project - you can take a screenshot of your project LabVIEW RT target and the location of the shared variables? What is the configuration of the shared variable? Do you use the cRIO Scan Engine or FPGA (or both?)? How you deploy your library of variables? You should also zip to the top of your project and join, if you can.

  Here are some articles about the possible causes:

  http://digital.NI.com/public.nsf/allkb/C32368835ADAEE19862578500067A8C4

  http://digital.NI.com/public.nsf/allkb/7B52091D2FFA01EC86257C32005DF935

• Windows XP, outlook express, 11004, error 0x800CCC0D number socket error.

  Windows XP, outlook express, 11004, error 0x800CCC0D number socket error.  All the server, connection, and advanced properties are set correctly.  I seems that Outlook Express has stopped working - it will not get any mail from any account more.  XP is installed on my computer desk top of page. - Maybe (?) when I tried to email a link of my computer laptop (Vista) and Microsoft Mail address (or something like that he stopped and asked me to set up a new e-mail account and I canceled)? After that, I can't use Outlook Express. The laptop and the desktop using the same internet access to Comcast.    I contacted Comcast and the comcast tech said "all settings are correct - call Microsoft.

  If the following does not help, please post the error message in its entirety. You can left click on it to highlight then right click to copy and then paste in this thread.

  Change the SMTP port to 587 and ensure that: my server requires authentication is enabled.

  How can I set up/configure Outlook Express, Windows Mail & Windows Live Mail to E-mail from Comcast?
  http://www.Comcast.com/customers/FAQ/FaqDetails.ashx?ID=2288

  Bruce Hagen ~ MS - MVP [Mail]

• my email shows an unknown error has occurred. Message cannot be sent because of potential abuse. Error 0x800CCC6F number

  I can't send emails, and I'm not sure receving all.

  Here is the message: an unknown error has occurred. Subject'Fw: Re: try it yourself ', account: 'att.yahoo.net ',.

  Server: 'smtp.att.yahoo.com', Protocol: SMTP, server response: '554 Transanction failed; Cannot sense message

  due to the possibility of abuse. Please visit http://postmaster.yahoo.com/abuse_stmp.html for more information',

  Port: 465, secure (SSL): Yes, Server error: 554, error 0x800CCC6F number

  Hello

  I suggest you try the steps mentioned below and check if it helps:

  Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express

  http://support.Microsoft.com/kb/813514#method4

  XCLN: Error 554 in Outlook and Outlook Express authentication credentials

  http://support.Microsoft.com/kb/186134

  Hope this information is useful.

• I can't receive emails on Outlook Express. Get the 0x800C0133 error message number.

  I can send and receive Outlook e-mail messages and can send emails on Outlook Express, but cannot receive them on Outlook Express. Get the 0x800C0133 error message number.

  I can send and receive Outlook e-mail messages and can send emails on Outlook Express, but cannot receive them on Outlook Express. Get the 0x800C0133 error message number.   Problem seems to be with the program Outlook Express and think I need to reinstall.  How do you do that?
  Error number: 0x800C0133 = a corrupt Inbox.
   
  Move any message you want to save to a local folder that you create. Then, remove the problem of Inbox as follows.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.
   
  With OE closed, find the box of Inbox.dbx and delete it. Another will be created automatically when you open OE.
   
  General precautions for Outlook Express:
   
  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
   
  After you're done, followed by compacting your folders manually while working * off * and do it often.
   
  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

• I click 'Update Express' and get [error number: 0 x 80070424] the website has encountered a problem and cannot display the page you are trying to view

  My laptop using Windows XP. I regularly update Windows, once a month. However, when I try to update Windows now, I get looks like this: "[error number: 0 x 80070424] the website has encountered a problem and cannot display the page you are trying to view" I

  Hi LarrySpessert,

  You did it of any material changes or software on the computer before this problem?

  This problem occurs if a service that is required for Windows Update or Microsoft Update is not registered.

  You can follow this link & check if the problem persists.

  Error message when you use Microsoft Update or Windows Update Web sites to install updates: 0 x 80070424

  Hope the helps of information.
  Please post back and we do know.

• Platform error ID number how to fix

  Platform error ID number how to fix

  Hi silvereagle30,

  1. What is the full error message or code you receive?

  2. when exactly you receive this error message?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.

  When posting questions to a professional forum or newsgroup, it is vital to format the question and its content in a proper way in order to greatly increase the possibility for quickly receiving a good answer. For more information, see this link.
  How to ask a question
  http://support.Microsoft.com/kb/555375

  Hope the helps of information.

• "Receive the error message" number limited unidentified network access.

  Original title: Tp-link-router connects to windows vista Ultimate edition

  Hello

  I have an Acer aspire 5315 laptop with windows vista ultimate installed and I have a router TP-Link TL-WR841N my Wi - Fi. The problem I have is that the laptop does not connect to my router correctly. Limited saying unidentified network that the router works well because I have another pc downstairs which connects to the access router. Security I use is personal wpa2 and I entered my security key in law whom I did it connects then sometimes times out, but usually he must change the home network. And I have file sharing on now before this router I got router belkin 54 g has of worked but developed a fault, so I bought this one instead. Now the strange thing is the laptop connected with wep on the old router. And the laptop has settings to select wpa2 but nothing happens and the security settings for the wireless is set to automatic and is set on the edge b/n/g on the router. I tried everything but no joy I thought maybe my laptop wireless card might be to old for the tp-link router that I have attached a few photos of snip to show you.

  http://ImageShack.us/g/577/10032013357.jpg/

  Hi Fionn,

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, you get limited access error.

  The problem may occur if the NIC (Network Interface Card) does not work.

  Click on the link below and see if it helps.

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread/70fcbc73-DECA-4ED4-A521-b1de0e0db271/

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/( )

  Hope this information helps.

  Answer to us if you are having problems with the network or any Windows problem, and we would be happy to help you.

  Good day!

• I'm trying to install Office note 8.1 but get this error message immediately after you enter the serial number and authentication code.

  Remark Office OMR

  I've been remark office omr 8.1 installed on 32-bit windows vista (intel pentium DC) for the last year laptop. Now plan to move it to a more recent hardware and the OS.

  I'm trying to install Office note 8.1 on Windows 7 Home Basic 64 bit (on laptop AMD E450 DC base). But am getting this error message immediately after you enter the serial number and authentication code. I tried to install different versions of the .net Framework (from 1.1 to 4), but nothing seems to solve the problem.

  I even tried to install it in mode compatibality. but no luck.

  Here is the error message (between BEGIN and END lines)

  -BEGIN-

  An error occurred instantiating the object of authentication. Please restart your computer, and they run the Setup again.
  Error number = 2147219705

  Error = description

  ------ END--------

  Appreciate any help

  Thank you

  SJ

  Just for the follow-up of this: I have sent comments, and they responded in 20 minutes with:

  Please contact the Support of the note.  I'm sorry that you are experiencing this error, but it seems by the error message that you install note on a Windows 7 computer.  This error is caused by a Microsoft security update that was released in July 2011 for Windows 7 and caused upward to change our software.  Here is access to our Download Center for you to install the version 8.4 of note.  You will use your current serial number, license key and authentication code.
  They then provided a link to their Download Center where I could download 8.4
  E - mailer to * address email is removed from the privacy * and they will answer you. They have great customer service.

• More than 1 SQL query with checkbox and error invalid number report

  Hi all

  I have two SQL query reports that each has an apex_item.checkbox and two processes for each report.  A report/process works very well.  It gives me an error of invalid number.

  In addition, another query SQL (editable report) gives me the following error when using the Multi line process, delete.

  	ORA-06502: PL/SQL: digital or value error: character number conversion error ORA-06502: PL/SQL: digital or value error: character number conversion error
  Ok

  When I got a report from SQL query (with box and a process) and the query SQL (editable report) everything worked.  It stopped working when I added another SQL query report (with box and a process).

  A SQL query has the following in my query: apex_item.checkbox(3,email_id,'UNCHECKED') ""

  The other SQL query has the following: apex_item.checkbox(2,b.file_id,'UNCHECKED') ""

  Any help will be greatly appreciated,

  Sylvia

  Hi Reema,

  I've recreated the region and now it works!

  Thank you for this, looking at

  Sylvia