Article with pages of different size
Hello
I would like to make an article with pages of different size. So let's say I have an article in landscape with the first page in 1024 x 768 and the second page is 1024 x 384 (half height).
It seems that National Geographic done this, see here:
As you can see, in the article in the middle (A Walk in the Clouds) is about half to the page above it.
I know, that there can be an article of smoothscroll a page because it really snaps on the second page, and you still see a part of the page above it. There is no in between however so he can't really roll smooth.
Or if smoothscroll it takes another feature, we'll article snap either up or down, but not between the two. How is that done?
Can't find any information on this anywhere.
Thank you, Julian.
Hi Julien,
It's not quite make sense. It spend of "Horizontal only ' to 'Off' should not be causing the file to be re-bundle/upload. (You don't need to update the file after doing this because it's a simple change in metadata).
Note: You need to pass the flag if you do not want 'day' the file at a time given.
Casey
Tags: Digital Publishing Suite
Similar Questions
-
working capital with images of different sizes in the table
Hello, I have a table with images of different size. I want to use a bearing on each Panel, but my image is not the same size. When I roll over the image the first image disappears. Any suggestions? I use CS5.5 Show map to the bottom.of page.
Thank you
Also I have never been able to use the "Preview in browser" globe icon I don't seem to be, any suggestions on how to add this?
A very simple solution is to make a second image that contains the image superimposed on the map. You must have 4 total images for this (all images have the same size):
1. the plan with no photos
2 - 4. The card with a unique image on the desired region (i.e., 3 additional images).
In your access points, you exchange the entire map with the map of the desired region.
-
slideshow with images of different sizes (Adobe Muse CC 2014)
Hello world
Firstly it should be noted that I use Adobe Muse CC 2014
Is it possible to create a repeating slideshow (not full screen or Viewer), with images of different sizes, so that when the image is square or portrait or landscape, the image size will be changed automatically depending on the size of the image inside.
I know that in some widgets, one solution is to select each image and manually set the desired size of each image, but it is not easy when you have for example 50 images.
Thank you
You would need to manually go to this, unfortunately we cannot do this without manual work.
Thank you
Sanjit
-
Disjoint working capital with images of different size?
Each tutorial explains the disjoint rollover images MUST be the same size, etc.. But for the type of photos that I work with, it is impossible to make them the same height. This site is exactly what I'll do with images of different sizes used: http://www.warmbloods-for-sale.com/HorseDetail.asp?HorseID=21333 & UserID = 1775. No idea how they achieve this? Or any ideas on how I can manage the same effect with different sizes in Dreamweaver CS4?
Do a Google search for Lightbox, litebox, floatbox, or look at the Image Gallery Magic of the seven project.
Nancy O.
ALT-Web Design & Publishing
Web | Graphics | Print | Media specialists
www.Alt-Web.com/
www.Twitter.com/ALTWEB
www.Alt-Web.com/blogspot.com -
button with text of different size
It is possible to have the text of different sizes on a single button? Whenever I highlight a section, and change the font size, it changes the whole button. I'm using labview 2009 and a guy at work has version 7.1 and with this version you can do it. Any ideas? Thank you
Instead of select part of the text you can copy paste the different size text and it will work
-
I do a page that contains the content of the image for the most part. It's a big circle in the Middle, so I won't be centered vertically and horizontally. I also want to stay centered and resized proportionally for different screen sizes. I read at the request of the media, but it seems to me that the elements just become liquid. Can I do the elements remain in place using the media query?
I'm working in Dreamweaver CS5.5
I meant use 'z-index' selector CSS to the 'layer' your div on the page: http://reference.sitepoint.com/css/z-index/demo
-
Flash Web Sites with Pages of different heights
http://louiswu.aisites.com/imd233/final/index.html
The link above for the my last class project. On all pages of the site, you will notice that when you scroll in your browser, it is a big gap between the bottom of the content and the bottom of the browser. The exception is the STORE.
I just stumbled on a "'limited ' of creating websites with Flash, in that the page with the largest content will determine which scene is the height for the rest of the site?"
I don't know yet what I should ask here: is there some kind of workaround, or altogether different kind, I should work when using Flash and HTML/CSS together?
The only option I see right now is to create separate .swf for each pages files and then incorporate them into their own HTML files.
Laughing out loud. Just to answer my own question?
When you create a Flash swf file it has a size of stage, and that the size of stage, it is everything that makes you.
Most people design a Flash site to match the size of the browser window and not one that requires scrolling. In this scenario, if it was necessary to scroll, the scroll would be built into the SWF and scrolling the browser would remain unchanged.
For a site whose height varies from one page to another, it would be more likely to not create a Flash site and instead of creating individual pages for each section.
If somehow you answered your own question so. If you want to use Flash to design and you want to have different sections parade only to the extent necessary by using the wheel of the browser, the best way to accomplish this is to have each page as a separate html page containing a separate swf file.
-
Need help with images of different sizes being loaded from a container of centering
Stop();
mainArea_mc.visible = false;
home_btn.addEventListener (MouseEvent.CLICK, function () {Stop ("model home")});
var totalImages:int = 0;
var imageDirectory: String = "";
var currentImage:int = 1;
var filePrefix: String = "";
var loader1: Loader = new Loader(); 2 Chargers, so we can fade a picture on top of the other
var loader2: Loader = new Loader();
pic_mc. AddChild (loader1);
pic_mc. AddChild (loader2);
loader1. Name = "loader1."
loader2. Name = "loader2";
loader1.contentLoaderInfo.addEventListener (Event.COMPLETE, resizeFadeImage);
loader2.contentLoaderInfo.addEventListener (Event.COMPLETE, resizeFadeImage);
info_mc.title_txt. AutoSize = TextFieldAutoSize.LEFT;
If (presModeSlides) / / slides Viewer vars configuration
{
totalImages = slides [currentSlideNumber] .numSlides
imageDirectory = "Data/slides/"+slides[currentSlideNumber].directory+"/";
filePrefix = "slide";
info_mc.title_txt. Text = .title slides [currentSlideNumber]
info_mc.speaker_txt. Text = .speaker slides [currentSlideNumber]
info_mc.university_txt. Text = .university of slides [currentSlideNumber]
}
else / / Setup Photo viewer vars
{
totalImages = 233;
imageDirectory = "data/images /";
filePrefix = "image";
info_mc.title_txt. Text = "user International BioPlex® 2200 3 meeting;
info_mc.speaker_txt. Text = "Images";
info_mc.university_txt. Text = "";
}
info_mc.speaker_txt.y += info_mc.title_txt.height; Position sublines so that they are directly under the title
info_mc.university_txt.y += info_mc.title_txt.height;
leftArrow_btn.addEventListener (MouseEvent.CLICK, prevImage);
rightArrow_btn.addEventListener (MouseEvent.CLICK, nextImage);
showImage (currentImage)
function showImage(num:int)
{
If (pic_mc.getChildIndex (loader1) > pic_mc.getChildIndex (loader2)) / / set the jpg file in what container is on top for the moment
{
loader1. Load (new URLRequest (imageDirectory + filePrefix + currentImage + '.jpg'));
}
on the other
{
loader2. Load (new URLRequest (imageDirectory + filePrefix + currentImage + '.jpg'));
}
}
function resizeFadeImage(e:Event)
{
e.currentTarget.loader.alpha = 0;
Tweener.addTween (e.currentTarget.loader, {alpha: 1, time: 0.4, onComplete: removeOtherImage, onCompleteParams:[e.currentTarget.loader]});})
e.currentTarget.loader.scaleX = 0.75;
e.currentTarget.loader.scaleY = 0.75;
var bitMap: Bitmap = Bitmap (e.currentTarget.loader.content);
bitMap.smoothing = true;
}
function removeOtherImage(l:Loader)
{
If (l.name is "loader1")
{
pic_mc. SetChildIndex(loader1,0);
If (loader2.content! = null)
{
If (loader2.content is Bitmap)
{
(loader2.content as Bitmap).bitmapData.dispose ();
}
}
}
on the other
{
pic_mc. SetChildIndex(loader2,0);
If (loader1.content! = null)
{
If (loader1.content is Bitmap)
{
(loader1.content as Bitmap).bitmapData.dispose ();
}
}
}
}
function nextImage(e:Event)
{
If ((!)) Tweener.isTweening (loader1)) & & (!) Tweener.isTweening (loader2)))
{
If (currentImage < totalImages)
{
currentImage ++;
}
on the other
{
currentImage = 1;
}
showImage (currentImage);
}
}
function prevImage(e:Event)
{
If ((!)) Tweener.isTweening (loader1)) & & (!) Tweener.isTweening (loader2)))
{
If (currentImage > 1)
{
-currentImage;
}
on the other
{
currentImage = totalImages;
}
showImage (currentImage);
}
}
:
function resizeFadeImage(e:Event)
{
e.currentTarget.loader.alpha = 0;
Tweener.addTween (e.currentTarget.loader, {alpha: 1, time: 0.4, onComplete: removeOtherImage, onCompleteParams:[e.currentTarget.loader]});})
e.currentTarget.loader.scaleX = 0.75;
e.currentTarget.loader.scaleY = 0.75;
e.currentTarget.loader.x = (stage.stageWidth-e.currentTarget.loader.width)/2;
e.currentTarget.loader.y = (stage.stageHeight-e.currentTarget.loader.height)/2;
var bitMap: Bitmap = Bitmap (e.currentTarget.loader.content);
bitMap.smoothing = true;
}
-
I have a desktop hp jet pro 8600 and printer. My original printer scanned pages front and back of different sizes, the printer stopped scanning properly and I replaced with the same model. Now, this printer can not scan other than letter size paper. I can only scan two-sided letter-size pages! The reason why I bought this printer has been for its scanning capabilities. I talked to support HP they said it scans only some dimensions of the page in duplex mode. Please HP DIFFICULTY this problem and give your customers the ability to SCAN RECTO VERSO DIFFERENT SIZES of PAGE. I've been with hp for many years, printers, laptops and a computer
Message reads
"The document feeder only supports analysis for some sizes of paper double-sided. If your original is too long or short, use the scanner glass.
HP I'm supposed to use glass scanner page-by-page, I bought a officejet pro for special to spend less time scanning features manually. I wonder what the reason for this restriction of page size, it worked on my previous printer.
I solved this problem without downgrading the firmware to version CLP1CN1232AR.
I downloaded and installed HP Web Jetadmin to do this (www. HP.com/go /webjetadmin). Then, I followed the instructions on the manual (http://h10032.www1.hp.com/ctg/Manual/c01943164.pdf) to activate this option.
The image I used was obtained on the HP ftp site: ftp://ftp.hp.com/pub/networking/software/pfirmware
The name of the image is: ojpro_8600_n911_g_n_1232A_09272012.ful.rfu
Now, I can scan both sides of the legal size.
-
How I let the user of the page can select images of different sizes when buy a print?
Hi all!
I'm currently trying to make a website in Adobe Muse CC 2015.1 that sells prints of photographs, however I would like to ensure that the buyer can select different sizes for printing and also other frameworks of size. How would I do this then it will affect the price results via paypal? This is something Ive been tempting for two weeks researching and haven't found anything, if anyone knows how to do this I really would appreciate it if I said.
Thank you
James Tucker
I think it will be difficult to push the Muse within these limits. Small or greater step towards a solution of real e-commerce (with caddies, counting and paid and all) it is difficult of application skeleton Muse with just a PayPal button sell stuff.
It is more useful and entirely possible to take a look at the other ways to integrate with a few small to mid-range e-commerce systems that play nice with Muse. MuseThemes has a nice article on this subject, in which they refer to their own connection widgets (like their widgets Ecwid and PayPal ). They mention also to the help of the Shopify buy button. BTW, Qooqee is a more capable Shopify widget !
I hope this helps.
-
Social sharing within the HTML article with several pages
We have a customer magazine that we publish on the phone like a .article by liberation, as it suits better the range of phone screens (as opposed to an Indesign with different sizes of small screen)
It is structured like index.html, 1.html, 2.html, 3.html... tswan.html, then in a file .article
Now, we have been asked to include the "Social sharing" feature for each item inside the .article file.
When you look now, you can share the .article together, but not for example 2. HTML
I see that the viewer creates certain specific features of the operating system when you view a .html ('complete' to return to index.html and the title of the metatag in the HTML file)-would it be possible to include a Meta tag in the header of the html file for example "include sharing" so that the share button can be introduced by connecting Web viewer article "articles"?
Sharing is a feature of iOS, activated at the level of the project.
Sharing comes from the article which is read.
Article = an action. It is not the HTML here, it is the structure of your content in 2015 of DPS.
-Colin
-
Width of page is to different sizes of sovereign (photos)
Dear users of Muse,
I have a site and when I click from one page to the other Web sites jumping from left to right because of a rule different widt.
As you can see there are different sizes and it is very annoying because the site left-wing past right can someone help me with this one?
I'm Dutch I'm sorry for my English.
Thank you fellow musers!
Hi Niels,
Have you noticed the scroll down bar http://prntscr.com/3q7cvy ?
You can scroll to the left and see if that aligns the rule properly on all pages.
- Abhishek Maurya
-
Hello
I have a loop 'for' which can take different number of iterations according to the number of measures that the user wants to do.
Inside this loop, I'm auto-indexation four different 1 d arrays. This means that the size of the tables will be different in the different phases of the execution of the program (the size will equal the number of measures).
My question is: the auto-indexation of the tables with different sizes will affect the performance of the program? I think it slows down my Vi...
Thank you very much.
My first thought is that the compiler to the LabVIEW actually removes the Matlab node because the outputs are not used. Once you son upward, LabVIEW must then call Matlab and wait for it to run. I know from experience, the call of Matlab to run the script is SLOW. I also recommend to do the math in native LabVIEW.
-
should what size of file I use on jpg imported for them to properly size with Premiere Pro. When I import them into different sizes, they are large or small
In the preferences, select scale to frame size and then any media imported after the modification will be automatically resized to fit your sequence.
Thank you
The f
-
How to adjust the angle rounded with different sizes of forms to match?
How would you describe the relationship between a corner rounded to the dimensions of a shape? I want to create a rule of how to cut corners on our boxes, but want it to be applicable to the different sizes of boxes - but I don't know how the math works. I wish that all of our boxes to look consistent, regardless of the amount. Thank you.
What happens if you make an article for each basic shape (square, high rectangle, large rectangle) and set the size of corner on each of them. So, if you need a larger version, just wide. The proportions of the corner to the size of the objects will remain the same.
Maybe you are looking for
-
I work with firefox for a long time without any prplems but suddenely I can't open then reset and then install a few toll bar and the user agent changer Add ons after that install them I can't open at all then reset but useless and then reinstall mor
-
On Windows7 Home Premium Edition, I can't get a new tab to open no matter what I try. Occasionally, if I click on a link on the current page, a second tab opens, but 99% of the time I'm stuck using the first tab for everything and using the back butt
-
Too many attempts of incorrect verification, you have done too much tent to answer your security questions. This massage it because I am trying to write wrong answer to the security question
-
Update for Windows Vista platform
I saw the thread on "platform update for Windows Vista" I ran the update still says the same thing when I try to install live messanger or mesh 2011, any ideas? I hope!
-
Help, I'm trying to connect my Dell laptop to a TV.
Help, I'm trying to connect my laptop Dell to a TV, there is a vga output. I bought a compontent video (y/pb/pr) cord vga. My laptop isn't reconizing any other view. Anyone have an idea how I can solve this problem. My TV does not have a vga connecti