Artifacts and low resolution in the poster image

Similar Questions

• Panoramic image with text and images at the top of the poster image

  I tried to create a characteristic panoramic image where there is text on the top of the image of the poster with a picture. Below the poster image is panning. The problem is the text and the image that I put on the top of the poster image, does not appear when you use the panoramic image. How can I get it work?

  The problem was the image should be a jpeg file, it was a tif

• Games running in lower resolution on the desktop resolution does not fill the screen

  I have a laptop HP ENVY 17 TS with NVIDIA GT 740 M and Intel 4600HD graphics drivers and running Windows 7. Whenever I want to change the resolution in games at a lower resolution on the desktop resolution, the game shrinks to its view, leaving the couple of inches black bars on the edges. For example, if my the desktop resolution is 1920 x 1080 and I want to start a game in 1600 x 900, the game does not fill the screen, instead, it leaves an amount of empty space on the edges of the screen.
  
  In order to solve this problem, I tried the following steps:
  
  I first tried to locate the view tab in the NVIDIA Control Panel in order to define the scale/stretch in "Full screen", but my version of NVIDIA CP isn't the view tab (my NVIDIA drivers are the latest version).
  
  Then I discovered that I should do this in the Intel HD Graphics Control Panel. My Intel HD Graphics CP has an option named "Calibration" under display > display settings and it doesn't show the option to retain display scaling that is checked by default and does not change. Also, after searching the Internet I saw that some people suggested entering the 'advanced settings' and try to make changes. When I try to enter advanced settings, under view, it says 'this screen does not support advanced settings'.
  
  After trying without success, I tried the update driver Intel via their website, hoping that it can fix the problem. I ran the small Intel application on their Web site that identifies my chipset and offers me the latest driver for this chipset. Web site told me that the driver is installed on my computer is 10.18.10.3304, and there is an update for what is 15.33.18.64.3496 (or 10.18.10.3496). So I downloaded the file, but when I tried to run, it gave me this error message: "the drivre being installed is not validated for this computer. You can get the correct driver from the manufacturer of the computer. Setup will now exit. "that makes no sense.
  
  After trying the above steps, I'm not able to solve the problem, and I need help from someone who really knows how to solve this problem.
  
  Thank you.

  Solution (I hope)

  1. choose the properties of the graphic (logo Intel) option when you right click on the desktop

  2. go in view

  3. go through the resolutions on the 'Resolution' and change to this resolution (do not click Apply)

  4. for everyone to go to 'Scaling' at the bottom of the screen and change it to scale full screen (do not click Apply)

  5. Repeat until you get back to the higher resolution (that won't let you change the scale).

  6. quickly choose a few resolutions from the drop-down menu to make sure that they have changed their scale.

  I had a problem with some resoultions changing the way they were, but which should solve most of the problems.

• workaround for the slowdown in performance and the low resolution of the RED R3D files after effects CC 2014 (13.0)

  ml http://blogs.adobe.com/AfterEffects/2014/06/Red-R3D-Problems-After-Effects-CC-2014-13-0.HT

  The After Effects team are investigating a bug in after effects CC 2104 (13.0) when RED (.) R3D files) are very slow and the resolution of the images is poor, all sampling of 1/8.

  
  

  The following workaround solution was reported to solve problems in some cases:

  1. Save the project.
  2. Choose Edition > purge > all memory and disk cache.

  
  

  Please post in this thread on whether or not this work around has helped you.

  Performance issues and resolution with the RED (.r3d) files have been fixed in the CC of effects after update to 2014.1.1 (13.1.1).

  Details: http://bit.ly/AE_1311_details

• Resolution of the projected image

  During the projection of an image of a picture of PP CS6 via a projector screen, the resolution of the image on the screen is very low. The public cannot read the data on the projected image.  The laptop is already on the maximum resolution. I use the operating system is Windows 7 Home Premium on a Toshiba 64 k. Y at - it a Windows setting to the resolution of the image traditionally planned? Thanks for the help.

  What is your film resolution and frame rate, interlaced or progressive? First will create and export or make almost any video format if you have the codecs.

  Let's say that your film is full HD uncompressed, 1920x1080P. This is unlikely since hard drives and CPUs can choke on codecs uncomrpessed. If your movie has probably been transcoded to friendlier codec. I don't know about Windows Media, but on a Macintosh, we would probably use H.264. If it is still in full size HD, your video card installed is simply not able to read it in full resolution. The film is to be scaled down, pixels are shriveled up and away, thrown to fit on maximum screen size of your card. As your movie 1080, reduced about 30% to 740 at 760, comes in your upscaler is be blown back to 1080. But the information has been lost. All your upscaler can possible do make the blobby parts more large; It cannot replace the pixels that have been lost.

  Build your movie in a format 720. Make sure that all your graphics are visible on your editing screen by observing it remotely simulating the environment of the screen. Or, better, to connect the projector to your editor to get an overview of the results.

  Or use a device that is able to play 1080 full HD.

• Embedded Fonts and low resolution PDF

  Hi guys,.

  I have Acrobat Pro 9. I've used Acrobat Pro 7 some time ago and it was great to have option of embedded fonts. I read that if I save the PDF file in high resolution (printing for example) fonts will always be integrated. The thing is I want to make a Low Res PDF for the Web but Embedded fonts so that everyone will see the Garamond type I choose or if they decide to print it, they can do it and maintain its design.

  Can I do this?

  Thanks for any info!

  See you soon,.

  SEBS

  In InDesign, just use File > export and choose preset for smaller file size. Which will integrate your fonts (the subsets that would be good enough) and reduce the image color resolution 100ppi.

  If you want it lower, like in Acrobat, go to the "Compression" settings and put them at a lower resolution it.

• Satellite C660D - 10 d - low resolution of the webcam

  My computer is a Toshiba Satellite C660D - 10 d with Windows 7. I bought it 6 months ago and at first my webcam worked fine, with a resolution of 640. Now, the webcam image is very blurry, the resolution is only 320 * 240 and I can't change it, because it's the only option. I reinstalled the driver, but the problem is always the same.

  What can I do about it?

  Hello

  The laptop supports a 0.3 M pixel webcam and image formats supported are:
  160 X 120, 176 X 144, 320 X 240 (QQVGA), 352 X 288, 640 X 480 (VGA)
  You can also save the movie in 320 x 240 and 640 x 480.
  So as you can see the hardware supports higher resolution.

  I have no idea why the other values are locked maybe something wrong in the registry or similar

  I have even if the new installation of the webcam software could fix this, maybe you should uninstall the webcam software first and then recommended to clean the registry with CCleaner and then might install the software once more if in the worst case you will need to reinstall the operating system

• How to take an extracted image and place it in the original image?

  Hey,.

  First of all, do not know if this is the right forum, but I can't find a bulletin board for NI Vision issues.

  Here's what I do.  To save time in the inspection process, I extracted my original image inspected a subimage.  I used this subimage of threshold to a very low threshold, which is where I get my time saving, but now I need to back under the image in the original image to the same place (just to put them in a viewer and make customers happy).  How can I do?

  Thank you

  Hey,.

  You can use IMAQ ImageToImage:

  

  Andrey.

• Why photoshop mix lower resolution of the photo.

  Is there a workaround

  In distribution, the canvas size is defined in the workspace of harvest. You can get there, and then drag the harvest so that the canvas is bigger.  In this case, the recorded image is at a higher resolution.

• No update of the poster image edge

  Hello

  I updated a few assets in my dashboard animation and regenerated the file in Muse.  The image of the poster is now out of date and showing colors lot of Muse.  If I delete the image of the poster in the finder (I'm on a Mac), Edge throws an error and will not publish the file.

  Any ideas how to get on board to update the image of the poster itself?

  Thank you!

  Simply create a new image of the poster in the properties/video, the camera icon.

• The poster image not centering in the browser

  My image of the poster (for display in IE8) is not centered in the browser window. This is the view as aligned with a big gap to the right of the image on the left. How can I fix it?

  Or I could (which I just discovered) just take my OAM file and place it in a page of Muse, thus ensuring that everything goes as it should.

  Thanks for chiming in well!

• AutoPlay and if stop at the last image does not not on android Tablet

  I'm trying to use folio Builder to make a portfolio for my work and post it on my Nexus 7 Andorid tablet.  The opening page is a video that should stop on the last image.  After reading many articles, it seems that only iOS is able to use these features, and it won't work on android.  Are there workarounds?

  In early February, we will have our new native Viewer available in large pre-release Android, and you will be able to compile a version using this new application that supports the stop on the last image. Until then, no, there is no work around.

  Neil

• How to check the resolution of the related images?

  Hi all

  Could someone guide me to write a script of the Illustrator who will check the resolution of the image file file linked in PPP?

  Thanks in advance,

  Sanat

  With the help of Sonic, I was able to make it work for me. I have only tested with .psd, .tif and .jpeg

  #target illustrator

  var docRef = activeDocument;

  with (docRef) {}

  We expect instead of 1 point (image) here!

  var placedWidth = placedItems [0] .width;

  var placedHeight = placedItems [0] .height;

  var placedPath = placedItems [0] mpfprojectdir\dev10\src\csharp\projectbase.file;

  The following 2 variables are global

  XpixelDimension = 0;

  YpixelDimension = 0;

  Call the function

  exifDimensions (placedPath);

  Calculate the height & width of DPI

  var widthDPI = Math.floor (XpixelDimension / (placedWidth/72));

  var heightDPI = Math.floor (YpixelDimension / (placedHeight/72));

  Alert ('DPI width is' + widthDPI + "DPI height is" + heightDPI);

  }

  function exifDimensions (imageFilePath) {}

  imageFilePath.open ('r');

  try {}

  While (imageFilePath.tell)< imagefilepath.length)="">

  var row = imageFilePath.readln ();

  var idxOf = (line.indexOf ('') >-1)? line.indexOf (''): line.indexOf ('');

  If (idxOf >-1) {}

  If (line.indexOf ('') >-1) XpixelDimension = parseInt (line.substring (line.indexOf(">") + 1, line.lastIndexOf (')))<>

  else YpixelDimension = parseInt (line.substring (line.indexOf(">") + 1, line.lastIndexOf (')))<>

  }

  }

  }

  catch (ex) {alert ('Fluff') ;}

  Finally {imageFilePath.close (); return [XpixelDimension, YpixelDimension] ;}}

  }

• How can I put an upper limit and lower limit on the chart inside a while loop?

  Need some help here. I'm working on a project, I collected data thru OR myDAQ, draw a waveform graph, is possible to add a limit upper and lower the table on waveform? I tried ways but can't seem to work. Any help is appreciated thank you.

  
  

• upper and lower filters in the registry how ca I get it back

  in the registry, how can upper and lower filters I get them back. CD and dvd not being recognized

  Hello

  You are not absent from these filters, you do not want in most cases.

  This is for Windows 7 and Vista is very similar.

  ------------------------------------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">