As part of the patch Installation diagnosis who do I apply

Similar Questions

• My C:\ Total size of the disk was 1 TB, I shrunk it once, may I take part in the new installation of windows without losing my files that are on my other partitions?

  My C:\ Total size of the disk was 1 TB, I shrunk it once, may I take part in the new installation of windows without losing my files that are on my other partitions?

  My current C:\ Size of the drive is 500 GB (I shrunk it once).

  Thanks for help.

  See the following topics:

  http://notebooks.com/2011/02/25/how-to-create-a-simple-partition-in-Windows-7-quick-tip/

• Never had CS6 so had not yet installed on my system (as part of the first installation) - had CC for awhile and just realized there is not yet - someone knows a way to still get on the road with CC Prime Minister? I looked for days now

  Never had CS6 so had not yet installed on my system (as part of the first installation) - had CC for awhile and just realized there is not yet - someone knows a way to still get on the road with CC Prime Minister? I looked for days now and the best advice seems to apply to CC 2014 and has to do with installoing a previous version (CS6) of the Prime Minister - but seems not to apply to the CC 2015... HELP - I have plans to burn and don't want to go to third-party software (if I do I'll ditch CC because it won't let me complete my work on a DVD!) @.

  Hi Matt,

  I found this link corresponding to your query, please see if it helps: CS6 still not installed with creative cloud

  Kind regards
  Rahul

• SQL Server 2005 pack 2... does not install... and now the patch installer has stopped working

  problem signature:

  Problem event name: APPCRASH

  Application name: hotfix.exe

  Application version: 1.4.1549.0

  Application timestamp: 4891da2c

  Fault Module name: ntdll.dll

  Fault Module Version: 6.0.6002.18005

  Timestamp of Module error: 49e03821

  Exception code: c0000005

  Exception offset: 00041e57

  OS version: 6.0.6002.2.2.0.768.2

  Locale ID: 1033

  Additional information 1: crowd

  More information 2: e8adce1c2b9e7be834b4063ac3c53863

  Additional information 3: crowd

  Additional information 4: e8adce1c2b9e7be834b4063ac3c53863

  Hi there, try this forum experts-

  The SQL Server installation & set program at level
  http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/ TaurArian [MVP] 2005-2010 - Update Services

• How would I know that the patch for ms 10-002 is applied

  I have ie8 with vista home os in my laptop, I want to remote connect to my desk in my office. Since this morning, he complains, I need to patch ms 10-002, I applied for several tiime use windows update, but this error still happens.

  so, how would I know this patch is applied with success?  is there any executable file that I can download to run it manually?

  If the update installed successfully, Cumulative Security Update for Internet Explorer 8 for Vista (KB978207) or update of security for Microsoft Windows (KB978207) would be listed in Start | Control Panel | System maintenance and (if you use Classic view, skip this step) | Windows Update | View the update history (or programs & features |) Installed mises_a_jour).

  =====================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How would I know that the patch for ms 10-002 is applied in my laptop

  I have ie8 with vista home os in my laptop, I want to remote connect to my desk in my office. Since this morning, he complains, I need to patch ms 10-002, I applied for several tiime use windows update, but this error still happens.

  so, how would I know this patch is applied with success?  is there any executable file that I can download to run it manually?

  Thank you.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any update/Service Pack problem or issue in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  See you soon.

  Mick Murphy - Microsoft partner

• Each installation of the PATCH fails after installing Windows updates

  Hello

  I would like to report a problem, I think it's a bug of Windows introduced by one of the Windows updates (unfortunately I could not know who of them).

  Here's the test scenario:
  1. install a fresh copy of Windows on a test computer
  2. install all the Windows updates available (so the system is up-to-date)
  3. create a sample MSI installer that installs only some dummy files (let's say Product Version 1.0.0) and host on a web server

  4. install the MSI from the online location using a command line like this:

  msiexec /i http://server/share/package.msi

  5. create a. Patch MSP (e.g. v1.0.1) which only adds a new file to v1.0.0
  6 install the patch v1.0.1

  RESULT: the installation of the patch fails with the following error message: "the file name, directory name or volume label syntax is incorrect."

  NOTES:
  1. the question has replicated to Windows 7 and 8 machines updated
  2. the question is not replicated on a new install of Windows without updates applied

  Is anyone aware of what may cause this error? Once again the patch installation fails only on Windows computers with the latest updates installed.

  THX,

  Daniel

  Hello Daniel,.

  Thanks for posting in the Microsoft Community.

  I suggest you post your question in the MSDN forums:

  Check out the link:

  https://social.msdn.Microsoft.com/forums/en-us/home

  Hope this information is useful. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• On the Patch 9535311

  Hi all
  
  EBS 11.5.10.2 9.2.0.8, AIX 5.3, it's a TEST instance.
  
  I am trying to apply the latest cumulative patches for all families of products that we have. I'm currently apply the patches required, first of all, I applied patch 7429271 11I. AD. I.7 without any problem.
  
  Then when I tried to connect to the applications I get the error "ERROR: not found"digitSubstitution"parameter in the URL or configuration settings." I checked Metalink and come with Note: 1277045.1 explaining that the error is caused by the $FORMS60_WEB_CONFIG_FILE and I needed to apply the 9535311 patch to upgrade the version of the 115.148 file to 115.158. So I downloaded and applied the patch, there is no errors.
  
  So I ran autoconfig, until the script determines the context file, the following error has occurred;
  
  [/ apptest/TEST/testappl/ad/11.5.0/bin/adcvm.sh[211]: AIX: 0403-012 A test command parameter is not valid.
  
  and when it's done with the error, the following line was in the newspaper,
  
  AutoConfig could not successfully run the following scripts:
  Directory: / apptest/TEST/testora/iAS/Apache/perl/bin/perl-I /apptest/TEST/testora/iAS/Apache/perl/lib/5.00503-je /apptest/TEST/testora/iAS/Apache/perl/lib/site_perl/5.005-je /apptest/TEST/testappl/au/11.5.0/perl/apptest/TEST/testcomn/admin/install/TEST_testsrv
  txkFrmUTF8.pl INSTE8_SETUP 1
  
  Now, assume that this error is caused by the version of perl, but I don't know what to do exactly, can I you help me with this problem?
  
  Thank you
  Burak

  Hey Burak;

  Please check below notes:

  Failure of Adconfig.Sh to txkFrmUTF8.pl [416506.1 ID]

  Automatic configuration error: adcvm.sh [211]: ' AIX: 0403-012 A test command parameter is not valid ' [1185307.1 ID]

  Bug 10054410: AIX: 0403-012 A TEST COMMAND PARAMETER IS NOT VALID.
  https://support.Oracle.com/CSP/main/article?cmd=show&type=bug&ID=10054410&productFamily=Oracle

  Bug 4675487: grouping of iPlanet AppServer 6.5 on AIX
  https://support.Oracle.com/CSP/UI/Flash.HTML#tab=KBHome%28page=KBHome&ID=%28%29%29, %28page=KBNavigator&id=%28viewingMode=1143&bmDocType=BUG&bmDocDsrc=BUG&bmDocTitle=Clustering%20of%20iPlanet%20AppServer%206.5%20on%20AIX&from=BOOKMARK&bmDocID=4675487%29%29

  Respect of
  HELIOS

• I have a new idea called (active safety) and would be happy if I can have apple as my sponsor because the idea is new and I have a great expectations most apple applications will be part of my idea. So who can help? who should I contact at apple?

  I have a new idea called (active safety) and would be happy if I can have apple as my sponsor because the idea is new and I have a great expectations most apple applications will be part of my idea. So who can help? who should I contact at apple?

  Apple does not project sponsor, but you can contact Apple directly here > http://www.apple.com/contact/

• Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  This has two questions:

  1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

  2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

  3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

  Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

  The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

  Then there is the BootCamp partition on the HARD drive partition #2.

  Is there a way to get what I need?

  That is what has been described in this notice of two canoes?

  Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

  n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

  Thank you.

  After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

  Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

  A. take backup

  1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

  B. fuse out of the merger in two physical disks drive: SSD + HDD

  1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

  Cs diskutil list

  2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

  I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

  Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

  and repeat for disk1/dev/disk1 which is the HARD drive in my case).

  This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

  2 create independent partitions (non-fusionend) for the installation of OSX.

  Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

  3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

  C. install on the HARD disk as drive didier autonomous not fusion.

  1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

  D. use BootCamp Yosemite f5 to install windows.

  1. launch Yosemite bootcamp.

  2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

  3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

  4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

  -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

  -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

  5. open Boot Camp Assistant again and only select the third option, install Windows 7.

  It will show you the screen to select what installation disk, select HARD drive.

  Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

  For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

  Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

  6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

  7. once the installation is complete, check that windows is functioning correctly.

  E. Si you want to upgrade to windows 10 Windows 7.

  1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

  2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

  F. reinstall OSX El Capitan

  Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

  1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

  6 type the 'diskutil list' command to list all disks and partitions.

  The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

  The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

  G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

  1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

  Cs diskutil list

  6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB SSD 121.0 disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 1.7 Untitled TB disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 503.0 GB disk1s4

  5: Apple_HFS 801,4 Untitled GB disk1s5

  8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

  diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

  Note: Mark the group id of logical volume shown in the results.

  In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

  So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

  9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

  diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

  10 command "diskutil cs type list" to check the resulting fusion drive created.

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

  =========================================================

  Name: LVG

  Status: online

  Dimensions: 1815635525632 B (1.8 to)

  Free space: 90112 B (90.1 KB)

  |

  +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 1694646673408 B (1.7 to)

  |

  +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1809780178944 B (1.8 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

  12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

  13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

  14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

  15. yet once please take personal responsibility on damage if you follow the instructions in this article.

• Hello apple.toi have 1 iphone 4S issues to buy it in a store minh.toi your old phone, then reinstall it requires icloud mem.va part of the cu.toi not know who owns the nay.toi wish apple unlock his laptop for my toi.imei my *.

  Hello apple.toi have 1 iphone 4S issues to buy it in a store minh.toi your old phone, then reinstall it requires icloud mem.va part of the cu.toi not know who owns the nay.toi wish apple unlock his laptop for my toi.imei my * .gmail: ***@gmail.com

  This is a user to user forum. To disable locking activation iCloud the owner of the iCloud account should turn off. There is no way around it. Find my iPhone Activation Lock - Apple Support  If you are unable to contact the owner or that they will not remove the lock try to get your money as soon as the phone cannot be used. -AJ

• The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing, or the upgrade patch may update a different version of the program

  I try to use the Microsoft Office tool that implement an MSI for 64-bit Office 2010 installation file.  The tool works file and creates the msi file.  I get to the tool by going to the x 64-bit folder on the office 2010 installation disc.

  I install a new virtual machine from Windows 7 and tried to use the MSI file to install office 2010 and I get the error:

  "The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing or the upgrade patch may update a different version of the program"

  If I just click Setup on the office 2010 dvd he moved very well on the same VM window7.

  Does anyone have an idea how do to understand why the windows installer keep fails or what he wants?

  If I click on the msi even on a system with office 2007 is installed, I get the same error.

  Thanks for the help

  jbabe

  Windows Update has nothing to do with the upgrade or installation of Office 2010. Please post future questions in this forum: http://social.answers.microsoft.com/Forums/en-US/officeinstall/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error "Microsoft Visual C++ runtime library has encountered an error and must terminate the program" during the installation of the patch for World of Warcraft

  Original title: runtime library

  When you install the game World of warcraft it installs ok but the problem comes when the patch is installed, when it is 99% done windows gives me an error message

  Microsoft visual c ++ runtime library then said he has encountered an error and must terminate the program, I never had this problem when I put the game on my HARD lecteur2 replaced because he was going to die on me

  My operating system is Windows Vista SP2

  Help me please if you can

  Thank you much xx

  Hi Hopson81,

  Try to install the patch by starting the computer in selective startup mode (also known as a clean boot state).

  Start your computer in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  For instructions, see How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 .

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Error message "the upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing or the upgrade patch may update a different version of the program."

  Original title: cannot install WMP11, update rollup 2

  I'm still on WMP 10 for a reason, and I wanted to connect my PC with 360 videos. I downloaded the update, but he told me to go get the Update Rollup 2 or something, so I tried to install it and he told me that I needed to go get the .NET framework 1.1 and .NET framework 1.1 SP1. I went to download them and install them, but he tells me that "the upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing or the upgrade patch may update a different version of the program".

  I Googled, tried of all kinds, uninstalled SP3 and tried and nothing.

  Hi xelliotx,
   
  I suggest that you follow these steps.
   
  Step 1:
   
  First of all, download and install .net Framework Cleanup Tool to remove selected versions of the .NET Framework on your computer.
   
  Step 2:
   
  Manually install the versions of Microsoft .NET Framework below:
   
  Microsoft .NET Framework Version 1.1 redistributable package
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=262D25E3-F589-4842-8157-034D1E7CF3A3&displaylang=en
   
  Microsoft .NET Framework 1.1 Service Pack 1
  http://www.Microsoft.com/downloads/details.aspx?FamilyID=a8f5654f-088e-40b2-bbdb-a83353618b38&displaylang=en
  Once this installation is complete, try to install the other required software and check.
   
  See also:
   
  Error message when you install an update for .NET Framework 1.1 or the .NET Framework 1.0: "the upgrade patch cannot be installed by the Windows Installer service.
  http://support.Microsoft.com/kb/940332
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I bought Halo 2 for Vista, but who like OS Windows XP Pro, just can't launch the startup.exe, I search the community, there is a rumor that it won't work even with the patch. Can someone help, please?

  I bought Halo 2 for Vista, but who like OS Windows XP Pro, just can't launch the startup.exe, I search the community, there is a rumor that it won't work even with the patch. Can someone help, please?

  Unfortunately, Halo 2 does support Windows Vista and more.  Windows XP is not supported.  There may be 3 party hacks that can make it work, but they are not taken in charge and potentially dangerous.

  Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)