As the report

Similar Questions

• Need help to decipher the report panic

  My Mac Pro has had a few panic kernel last week and at least a couple of times would not start after the logo screen.  I could so he can start by Resetting PRAM only what she panics once again.   I don't know a lot about reading the reports of the panic, the only thing I noticed, is that it shows no DIMM 3 or 4.  Is it a hardware problem of RAM?  Any help would be appreciated.

  Anonymous UUID: 82B8536D-9B9C-A6E0-A37B-57D40AFF99A7

  Thu Sep 15 07:54:15 2016

  Panic report *.

  Machine-check capabilities: 0x0000000000001c09

  family: 6, model: 44 stepping: firmware 2:15

  signature: 0x206c2

  Xeon of Intel (r) CPU X 5650 @ 2.67 GHz

  9 banks of error reports

  CPU 0: IA32_MCG_STATUS: 0 x 0000000000000004

  IA32_MC8_STATUS (0 x 421): 0xba000000008000b2

  IA32_MC8_MISC (0 x 423): 0 x 0000000000090000

  Processor 1: IA32_MCG_STATUS: 0 x 0000000000000004

  IA32_MC8_STATUS (0 x 421): 0xba000000008000b2

  IA32_MC8_MISC (0 x 423): 0 x 0000000000090000

  Processor 2: IA32_MCG_STATUS: 0 x 0000000000000004

  IA32_MC8_STATUS (0 x 421): 0xba000000008000b2

  IA32_MC8_MISC (0 x 423): 0 x 0000000000090000

  Processor 3: IA32_MCG_STATUS: 0 x 0000000000000004

  IA32_MC8_STATUS (0 x 421): 0xba000000008000b2

  IA32_MC8_MISC (0 x 423): 0 x 0000000000090000

  4 processor: IA32_MCG_STATUS: 0 x 0000000000000004

  IA32_MC8_STATUS (0 x 421): 0xba000000008000b2

  IA32_MC8_MISC (0 x 423): 0 x 0000000000090000

  Processor 5: IA32_MCG_STATUS: 0 x 0000000000000004

  IA32_MC8_STATUS (0 x 421): 0xba000000008000b2

  IA32_MC8_MISC (0 x 423): 0 x 0000000000090000

  Processor 6: IA32_MCG_STATUS: 0 x 0000000000000004

  IA32_MC8_STATUS (0 x 421): 0xba000000008000b2

  IA32_MC8_MISC (0 x 423): 0 x 0000000000090000

  Processor 7: IA32_MCG_STATUS: 0 x 0000000000000004

  IA32_MC8_STATUS (0 x 421): 0xba000000008000b2

  IA32_MC8_MISC (0 x 423): 0 x 0000000000090000

  Processor 8: IA32_MCG_STATUS: 0 x 0000000000000004

  IA32_MC8_STATUS (0 x 421): 0xba000000008000b2

  IA32_MC8_MISC (0 x 423): 0 x 0000000000090000

  Processor 9: IA32_MCG_STATUS: 0 x 0000000000000004

  IA32_MC8_STATUS (0 x 421): 0xba000000008000b2

  IA32_MC8_MISC (0 x 423): 0 x 0000000000090000

  Processor 10: IA32_MCG_STATUS: 0 x 0000000000000004

  IA32_MC8_STATUS (0 x 421): 0xba000000008000b2

  IA32_MC8_MISC (0 x 423): 0 x 0000000000090000

  Processor 11: IA32_MCG_STATUS: 0 x 0000000000000004

  IA32_MC8_STATUS (0 x 421): 0xba000000008000b2

  IA32_MC8_MISC (0 x 423): 0 x 0000000000090000

  panic (appellant cpu 17 0xffffff801b3cf1ba): "control of Machine 0xffffff7f9d78d39c, registers: \n" "CR0: 0x000000008001003b, CR2: 0 x 0000000000000000, CR3: 0x000000001e372000, CR4: 0x00000000000226e0\n" "RAX: 0 x 0000000000000000, RBX: 0 x 0000000000000000, RCX: 0x00000000603d98dd, RDX: 0x7fffffffffffffff\n '" RSP: 0xffffff857ef03d00, PBR: 0xffffff857ef03d00, IHR: 0x7fffffffffffffff, RDI: 0xffffff85755f1148\n "" R8: 0xffffff8075947800, R9: 0xffffff7f9d7a3ef0, R10: 0x0000000071d8d02c, R11: 0x0000000071d81396\n ' ' R12: 0x7fffffffffffffff, R13: 0x7fffffffffffffff, R14: 0x7fffffffffffffff, R15» ': 0x7fffffffffffffff\n ' ' RFL: 0 x 0000000000000046, RIP: 0xffffff7f9d78d39c, CS: 0 x 0000000000000008, SS: 0x0000000000000000\n "" error code: 0x0000000000000000\n"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3248.60.11/ osfmk/i386/trap_native.c:168.

  Backtrace (CPU 17), Frame: Return address

  0xffffff85753c5e90: 0xffffff801b2dab52

  0xffffff85753c5f10: 0xffffff801b3cf1ba

  0xffffff85753c6070: 0xffffff801b3ecdff

  0xffffff857ef03d00: 0xffffff7f9d78b6d4

  0xffffff857ef03d30: 0xffffff7f9d78b7b4

  0xffffff857ef03d70: 0xffffff7f9d784ff1

  0xffffff857ef03e60: 0xffffff7f9d784690

  0xffffff857ef03f20: 0xffffff801b3d0459

  0xffffff857ef03f40: 0xffffff801b2f22fd

  0xffffff857ef03f90: 0xffffff801b2f27f0

  0xffffff857ef03fb0: 0xffffff801b3c9117

  Corresponding to the current thread BSD process name: kernel_task

  Mac OS version:

  Not yet defined

  Kernel version:

  15.6.0 Darwin kernel version: Mon Aug 29 20:21:34 PDT 2016; root:XNU-3248.60.11~1/RELEASE_X86_64

  Kernel UUID: E349749B-3303-3DDF-959C-B5885A0E1F6E

  Slide kernel: 0x000000001b000000

  Text of core base: 0xffffff801b200000

  Text __HIB base: 0xffffff801b100000

  Name of system model: MacPro5, 1 (Mac-F221BEC8)

  Availability of the system in nanoseconds: 2574260790

  last load kext to 1721994094: com.apple.iokit.IOUSBFamily 900.4.1 (0xffffff7f9c576000, size 630784 addr)

  kexts responsible:

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  com.apple.driver.usb.AppleUSBEHCI 1.0.1

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 417,4

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  Model: MacPro5, 1, BootROM MP51.007F.B03 12 6-Core processors, Intel Xeon, 2.66 GHz, 48Go, MSC 1.39f11

  Graphics card: card graphics NVIDIA Quadro 4000, NVIDIA Quadro 4000, PCIe, 2048 MB

  Memory module: DIMM 1, 8 GB, DDR3 ECC, 1333 MHz, 0x857F, 0 x 463732314752363546393333334700000000

  Memory module: DIMM 2, 8 GB, DDR3 ECC, 1333 MHz, 0x857F, 0 x 463732314752363546393333334700000000

  Memory module: DIMM 5, 8 GB, DDR3 ECC, 1333 MHz, 0x857F, 0 x 463732314752363546393333334700000000

  Memory module: DIMM 6, 8 GB, DDR3 ECC, 1333 MHz, 0x857F, 0 x 463732314752363546393333334700000000

  Memory module: DIMM 7, 8 GB, DDR3 ECC, 1333 MHz, 0x857F, 0 x 463732314752363546393333334700000000

  Memory module: DIMM 8, 8 GB, DDR3 ECC, 1333 MHz, 0x857F, 0 x 463732314752363546393333334700000000

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.106.98.100.24)

  Bluetooth: Version 4.4.6f1 17910, 3 services, 27 aircraft, 1 incoming serial ports

  Network service: Wi - Fi, AirPort, en2

  PCI card: Graphics NVIDIA Quadro 4000, view controller, Slot-1 card

  PCI card: NVIDIA Quadro 4000, NVDA, Parent, Slot-1

  PCI card: pci1b21, 625, AHCI, slot-3 controller

  PCI card: pci1095, 3132, other Mass Storage Controller, Slot-4

  Serial ATA Device: HL-DT-ST DVD - RW GH61N

  Serial ATA Device: WDC WD1001FALS-403AA0, 1 TB

  Serial ATA Device: Hitachi HDS722020ALA330, 2 TB

  Serial ATA Device: Hitachi HDS722020ALA330, 2 TB

  Serial ATA Device: Hitachi HDS722020ALA330, 2 TB

  Serial ATA Device: Samsung 850 EVO 500 GB, GB 500,11 SSD

  USB device: USB Bus

  USB device: USB Bus

  USB device: Hub BRCM2046

  USB Device: USB Bluetooth host controller

  USB device: USB Bus

  USB device: USB Bus

  USB device: USB Bus

  USB device: USB Bus

  USB device: USB 2.0 Bus

  USB device: Keyboard Hub

  USB Device: Apple keyboard

  USB device: USB 2.0 Bus

  USB device: USB 2.0 Hub

  USB device: USB DONGLE

  FireWire devices: built-in_hub, up to 800 Mb/s

  Crush Bus:

  Yes, very probably a memory problem when there is more than one bank error reports.

  9 banks of error reports

  Often see you also RAM disappear as you said "I noticed is that this is not show DIMM 3 or 4"»

• How to see the report on health v29 firefox?

  My firefox works slowly and I wanted to see the report on the health, but I got lost in the new interface of firefox, of course I really like it but right now I'm lost and cannot find how to open firefox report health function.

  So can someone point me in the right direction?

  Thanks in advance

  You can type about: healthreport in the address bar and press ENTER.

  Also try to read Firefox is slow - how to make it faster

• After updating Firefox 9.0.1 Mac OS x 10.6.8 Trusteer report for banking activity disappeared. I reinstalled the report but is still missing. How do I do?

  Hello. When I was on the internet with previous Firefox, there was Trusteer report (j.4 Banking UK software: http://www.trusteer.com/) icon was still there. However after Firefox gave me an alart update for version 9.0.1 Mac OS x 10.6.8 today and after that I followed the update in the early evening, Trusteer report disappeared. I have re-installed the latest report of Trusteer and restarted Firefox for several times, however, he is still missing. The report of Trusteer is a security software required to connect to secure Web sites Bank like RBS, NatWest and HSBC UK etc. and it also validates web security for Paypal and eBay by report of Trusteer on Firefox icon, that's why I need. How do I do? I have none of the other add-on/plug-ins installed, because previous Firefox crashed before conflict of Trusteer report and Nectar Yahoo Toolbar. If it was a bug, please fix as soon as possible please. Thank you.

  Make sure you have the latest version of installed Trusteer.

  I do not have my favorites on hand, but I do not remember the program Trusteer causing sometimes serious problems with Firefox, (some versions may even have been on the blacklist and blockedby Firefox).

  You can find more information if you are looking for in the forum.

  Sorry only once for a quick response.

• My computer guard shut down, and the report said "panic."?

  The computer stops regularly without promting, then automatically restarts after a few seconds. The reports said the word 'panic', as well as a bunch of stuff I don't understand. Much obliged for any suggestions as to what may be the problem.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ System

  (not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu bar.

  There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A report of panic has a name that begins with "Kernel" and ends with ".panic." Select the most recent. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  If you don't see any report, but you know, there was a panic, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  When you post the report, an error message may appear on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Why Firefox won't work all of a sudden? The reports sent every time...

  For about a week now, I was not able to start Firefox as it crashes every time immediately I try. Reports have been sent automatically every time. I uninstalled and tried to install other versions without success...

  Thank you

  In recent days, we have a lot of crashes with Trusteer report. If you have this program, try to disable it and see if that stops the noise.
  
  You can stop the report by using the Start Menu > programs > Trusteer report > report stop
  
  You can ask their helpdesk when a version update of their products will be available or, if you do not need this software, uninstall.
  
  http://www.Trusteer.com/support/en/report-problem

  Since yesterday, we have a lot of crashes with Roboform. Install the latest version of Roboform 7.6.2 should solve this problem according to the related Bug 691271.

  If you do not report or Roboform, so we have a crash report ID.
  When you send a report of the Mozilla crash puts it right in a gigantic database. We have no way to seek without the ID of the report. I don't know what the problem is without searching the crash report. Please get the ID of your last report of the accident report.
  
  See https://support.mozilla.com/en-US/kb/Firefox%20crashes

• I can't open firefox. Home page comes up, I get just the reporter Crash asking to restart/quit but every time I do the same message always comes back.

  I can't open Firefox. Home page comes up, I get just the reporter Crash asking me to restart/quit but every time I do the same message always comes back. I was not able to use Firefox for days now.

  In recent days, we have a lot of crashes with Trusteer report. If you have this program, try to disable it and see if that stops the noise.
  
  You can stop the report by using the Start Menu > programs > Trusteer report > report stop
  
  You can ask their helpdesk when a version update of their products will be available or, if you do not need this software, uninstall.
  
  http://www.Trusteer.com/support/en/report-problem

  If you do not report, so we have a crash report ID. When you send a report of the Mozilla crash puts it right in a gigantic database. We have no way to seek without the ID of the report. I don't know what the problem is without searching the crash report. Please get the ID of your last report of the accident report.
  
  See https://support.mozilla.com/en-US/kb/Firefox%20crashes
  
  or http://kb.mozillazine.org/Firefox_crashes

• I just installed Firefox 6, and the report does more - the same problem you had with Firefox 5. What is going on?

  You prompted me to install Firefox 6 tonight, because it addresses serious security/stability problems, but when I did this, the report icon has disappeared from the address bar. Reinstall the latest version of the report was corrected not it.
  It's the same thing with Firefox 5 a few months ago, and it has taken report per week to develop a new compatible version.
  Why this happened again? You not check this before launching new versions? Or, why at all not least we warn in advance that some programs will not work for X days? I prefer to be without the latest Firefox for a week or two, and no report - not least because that my Bank, I have to use the report.

  Please advise as soon as POSSIBLE.

  Malcolm Oliver

  This is the link in the message that Trusteer sent me today. I have updated and works great so far.

  Please contact the Support technique Trusteer.

  We are pleased to inform you that a version of the report that supports Firefox 6 has
  been released and is now available for download in the following link:
  http://download.Trusteer.com/NkuiAcruiKc/RapportSetup.exe

  Please be sure to restart your computer once the installation process
  completed.

  Please note: this version of the report is currently a beta version. We'd
  appreciate any comments you may have about this version.

  If the report indicates that the version of the report that you are trying to install is older
  than the version already installed, follow these steps:
  1. choose uninstall report
  2. When prompted, select 'delete all user settings '. Please, assisted by the
  suite of image: http://consumers.trusteer.com/files/images/uninstall.jpg
  3 reinstall the report from the link above.

• Firefox plant - Signature and ID the ID of the report: crash: 4a6fe122-4395-43f7-b2c3-492342100719 Signature: NOWImaging_Moz.dll@0x3bca

  Firefox keeps crashing

  ID of the Crash

  ID: 4a6fe122-4395-43f7-b2c3-492342100719

  Which block the report points to a file, NOWImaging_Moz.dll, as the probable cause of plant it. This file is not a part of Firefox, but a Google search shows that it is part of an extension, probably SlipStream SP decoders of images.

  Check your list of extensions, if you try to disable it to see if that stops the noise.
  To disable an extension follow these steps:

  1. Click on the Tools menu, and select Add-ons. Modules window appears.
  2. In the window modules, click the Extensions Panel. The list of installed extensions is displayed.
  3. Click on the name of an extension of the list to select it.
  4. Click on disable to disable the selected extension.
  5. Click Restart Firefox.

• Where is the Report Spam button?

  This person is the display which looks like a real help, but within the text is a dangerous link.   I don't see a button "Report as Spam" anywhere.

  richardsonkane75

  Also on the list Stop Spam of Forum.

  The 'Report Post' function will be available only after you have reached level 2. Thanks for the 'heads up '. I reported the scam.

• HDD iMAC - made NAS El Capitan trace bad sectors after the report of an error?

  I replaced the HARD drive failing in my iMac 2009 end with a 4 to Seagate NAS drive, thinking it would be a better more sustainable choice, ignoring other differences of a NAS disk.  The computer runs very cool indeed.  However,.

  Apparently the resumption on error and the mapping of the sector is different on a NAS drive.  Seagate advertisement indicates that during a difficult to read, the Seagate NASware reports the error to the operating system within a maximum of 7 seconds instead of spending up to 20 seconds to try to read (and remap?) the bad data so that the NAS operating system has a chance to recover data from RAID system and write a new correct sector and thus correct the file without error and little time.

  Modern readers but defective sectors realloueront told me that the NAS drives will not (could not check this based on data I found on the web site of Seagate).

  Three questions

  1: the OS has the ability to work with bad sectors and map just like the old OSs?

  2: El Capitan reports the error to the user, or turn the ball.  I never saw the report of the OS that the data file cannot be read properly, as windows used to in my old bad days before moving to Apple.

  3: this rumor NAS disk does not remap is correct?  I think it makes more sense to report the erorr to the operating system, and then remap the sector on a writing data (as the NAS operating system should do once he finds the correct data).

  I would not lose time popular with these basic question, but I could not find the relevant info.

  I don't want to swap the drive that replacing a drive in a 27 "iMAC is not easy and will not be repeated until the disc breaks down.

  A NAS is just a file server. He is responsible for the management of storage of data including the maintenance of readers. The operating system access is just request the data of and presenting data on the NAS. The inner workings of the actual storage is the responsibility of the NAS.

• Number of the results in the report variable

  Hello everyone,

  I need help in TestStand reports. I use TestStand 2014 and 2014 of Labview, both 32 bits.

  The situation is like this: I am running a test with test steps 3. The first stage of the test is a step of "additional results" which records the device under test info (versions of the hardware software etc...). This information appear in the report and the result data in the database (table prop_result). The next 2 steps are the steps 'real' which measures something.

  In the report, there is a call from the variable "Number of results" (see the screen attached capture) and you see a '3 '. There are actually only 2 steps of 'real' test as I don't want to consider the first step of "additional results" as a test step. How can we affect the variable 'Number of results' so that it does not count this first step? I tried to use the properties-> Run Options-> record result of the for Option set to "Disable". It works and the number of results appeared as "2", but the device under test info do not appear in the report and not in the prop_result of the database table.

  In general, how can I get the number of results of account not a step, but continues to display the result in the database and report? Is there an API where I can access and modify its value (number of results value) such as: "Number of results" - 1?

  Hope someone can point me in the right direction. I have attached the release of the report, as well as the file in the sequence.

  Yours,

  chati

  I ment, you can change the XML seq.--> \Components\Models\TestStandModels\reportgen_xml.seq generator (Ref http://www.ni.com/white-paper/3977/en/).

  It's the AddReportHeader, you need to change. Or more specific step 9 (in teststand 2012) which is a statement-->

  Parameters.ReportHeader += "<" +="" fileglobals.reportelementname="" +="" "="" type='UUT' "="" +="" "="" title='" + ResStr("MODEL", "RPT_HEADER_TITLE") + "' "="" +="" "="" link='" + Locals.UUTItemNameForLink + "' "="" +="" "="" uutresult='" + Str(Locals.Status) + "' "="" +="" "="" stepcount='" + Str(Parameters.StepCount) + "' "="" +="" "="">\r\n".

  and then, you can modify the varabel StepCount using some filtering by using for example a subsequnce that counts only the type of measures that your customer wants to be counted.

  There might be ways esier there, but that's what I'd do.

• How can I connect a Labview XY (cluster of 2 tables) TestStand 2010 SP1 chart and do appear correctly in the report?

  Patterns of data record TestStand 2010 SP1 default shared this cluster in two tables stored as binary data, resulting in two graphs displayed in the report: one for data and one for X data Y. We need the elements X and Y, couples on the same graph. This cluster is marked for logging as a step output variable. It seems possible to add a table "PROP_XYGRAPH" (similar to the PROP_ANALOGWAVEFORM) to the schema to simplify the other treatment after the database record, but how can we get the Builder, to accept this type of data is displayed correctly? XY graphics come from LabVIEW 2013 SP1 exclusively as a cluster of two matrices, usually between 500 and 1,000 items long.

  ... Geoff.

  Hello Geoff,

  Had a few resources for you to check. Let us know if none of them work for you.

  Inserting an image of LabVIEW Control:

  <>http://www.NI.com/example/30736/en/ >

  Display of graphics in TestStand:

  <>https://decibel.NI.com/content/docs/doc-38945 >

  Display of measurement data in the shape of graph:

  <>http://zone.NI.com/reference/en-XX/help/370052J-01/tsref/infotopics/measurement_data/ >

  See you soon!

• View the report not showing after test button

  It's really weird, if someone of you guys have had this problem before. It seems that teststand does not report. but I triple check all report parameters and parameters of the step and I have the same sequence of work on another computer and print the report. I tried to do a repair of windows testand and it didn't work either.

  There is an option in the settings of the Station to disable recording for all sequences of result. Can you check this setting and confirm that it is not enabled?

• How can I configure the folder in which a movie TS file stores the report?

  How can I configure the folder in which a movie TS file stores the report?

  Thank you

  Too bad... I found it

  Thank you

• How to change the report options to show only the results of success/failure?

  Hello

  in the report Options I have report = ASCII text file Format.

  In the Expression of filtering the results, I can choose between four preset selections (all results, exclude,..).

  But if I want to put together a custom then the first word 'Result' expression is highlighted in red
  Result.Status == 'past ' | Result.Status == "failed".

  And the error message in the ToolTip indicates: property name or an unknown variable.

  What happens then?

  THX

  OK, I lied!

  It worked for me, just by using Result.Status.

  It's ok that it shows red like that because it will assess correctly during runtime.

  Kind regards