AS3 - entry of TLF - and the ENTER key

Similar Questions

• Designer CSS and the Enter"" key.

  I guess that maybe it's a bug.

  When I m writing a new rule in the selection panel, on that I tend to press 'enter' to complete the edition but, every time I do it, a character 'a' appears in the rule (and editing is not finished). Little bug but annoying.

  It is not a bug, but the way it was designed. To finish editing a selector, press enter two times. It was designed this way because pressing ENTER to select a hint of code led to the selection being created, and you had to double-click on it to continue to build the selector. If you get problems with 'a' added to your selection, press ESC before you press Enter.

  Normally, 'a' will appear as an indicator of code only if you add a space after the existing part of the selector, but it can sometimes occur if you move the insertion point to the beginning of the selector field.

• Could not load any websites. I don't get any 'error message', the 'enter' key has no effect in the address bar. Works fine in FF and IE search box.

  Entering a URL in the address bar and pressing on enter does nothing. Or the 'enter' key or 'address arrow bar', to go to the site function. Web site does not load and no error message appears. 'Enter' key works very well in the FF and IE search box, is not my keyboard.

   Tried most of the recommended fixes under the "Error loading websites" article with the exception of "DNS refetching", as typing "about:config" in the location bar does no good as the "enter button" won't function. I've removed and re-added FF back into the windows firewall, removed ZoneAlarm from my system, edited proxy settings, deleted and reinstalled FF several times. NOTHING WORKS!!! I'm a die hard FF fan and this is KILLING me. Please HELP!!!
  

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• Satellite A100 - by pressing the Enter key and BACKSPACE insert a backslash

  The keyboard on my Satellite A100 has a perculiar behavior.
  The Enter key and BACKSPACE times return the insertion point to the beginning of the next line, and then insert a backslash.

  The behavior is similar in various products such as MS Word, internet Explorer, Notepad, WordPad, to name a few.
  The BACKSPACE key returns to the top of the page in MS Word and Notepad.

  This behavior is very frustrating and makes every day very difficult calculation.

  Does anyone have a solution to this problem

  Hello

  First I thought that this could be a result keyboard or Ms Word, Notepad setting language setting
  But while reading the story one more time, I think that this problem could be linked to the failure of hardware.
  But this is just a suggestion.

  I put t know if this problem would appear on new recovered BONES.
  Have you tried to restore the operating system using the Toshiba Recovery CD?
  Maybe you should do to see if it's really a hardware problem

  Good luck

• By pressing the ENTER key once instead of twice

  Hello!

  I am developing a Login System. I want the user to choose a user name (from the list), and then enter a password (in a text box with "the password display" enabled). I want the user to be able to press ENTER, optionally with a click on the Login button after entering the password.

  I'm doing it with a Structure to the event read the key Down event and using the node Vcle to record key is pressed. (see image below)

  My problem is that the user must press the Enter key twice to something happened. I want that happens on the first click.

  Anyone has any advice?

  Hey PeterPoPS,

  If you right click on the button enter and go to Properties > Navigation key, you can select the toggle property to bind to the key back from there. You can implement the correct mechanical action so that the button is not fixed in this State, such as lock to exit. You can change the action type mechanical button responds with by right-clicking on the control of entry button and navigate through the menu of mechanical Action . If you later want to use this button within a structure of the event, be careful because the mechanical action of locking must be explicitly read and reset through the event.

  This way you can build an event around the change in value of enter key.

  I hope this helps!

  Kind regards

• leave an interaction without the "enter" - key

  I am working on a task where the participants must push a button ' or 'K' as soon as possible, according to the symbol that appears on the screen.
  Right now I have an icon of the interaction with a calculation icon attached to it, but when I press on the ' or 'K' button, I always have to press the 'enter' - button to continue the conduct of flow... How can I get out of an interaction by pressing a certain key (S or K) AND at the same time to save this entry without having to press the "enter" - key?
  I tried all day, even with the helppages authorware, but I can't find the solution. Please help me!
  
  Best regards, Anouk
  

  "Anouk123" wrote in message
  News:fnhjqc$IBV$1@forums. Macromedia.com...
  > I looked the keypress responses, but I'm not familiar with
  > authorware and I just can't seem to do things... When I followed the
  > steps in the helppages, for keypress responses (which
  (> are hard to follow when you are not very familiar with authorware), I
  > stuck in the interaction. Enter is not necessary, but I can't get out
  > interaction with the keys I've selected. It seems simple, but it just
  > does not work! What actions should I take exactly to do this
  > work?

  1. place an Interaction icon on the flow line.
  2. drag a Calc icon to the right of this Interaction icon.
  3. open this Calc icon and type:
  keypressed: = clΘ
  4. set the response type to: Keypress
  The Keys value: K | S (or if you want to capture upper and lower
  case K | k | S | s)
  Direction the value: output Interaction

  Now when you press one of these keys keypress will set the value of
  the key and it will come out the interaction.

  HTH

  Chris Forecast

• page up and down and the arrow keys do not work, they do on any other programs

  Page up and down and the arrow keys do not work or jump at the bottom of page.

  You may have accidentally entered mode 'Keyboard Navigation. The F7 key will toggle "Keyboard Navigation" on or off.

  • See-> http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• When I type in a url, the Enter key is not recognized, so the site does not load

  When I type a url or paste in one and press ENTER, the Enter key is not recognized and nothing happens. It does not load. If I use a bookmark and click on a saved url that will load automatically.
  Have uninstalled and reinstalled firefox and it has not solved the problem.

  The problem may be caused by the Ask.com toolbar (Tools > Modules > Extensions)

  The details of your system display this toolbar to the user as AskTbARS/3.11.3.15590 agent

  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• When I enter a Web site in the url of the Enter key does not work. I have to click on the arrow at the end of the line. Is this a configuration problem?

  The Enter key does not work in the line of the URL. If I go says:
  www.Bing.com
  and then press the Enter key, nothing happens.
  I have to click the arrow at the end of the field in order to activate the link.
  If I am anywhere else on any page the Enter key works as it should.

  Please click the button of resolved next to the answer that solved your problem of Firefox support, when you are connected.

• By pressing the ENTER key in the first tab-> a button in a different tab is pressed?

  Hi guys,.

  I am facing a problem. I have a tab with 4 different tabs. When I'm in the first tab and try to change the value of a control by pressing the Enter key, it suddenly switches to the second tab and presses a button here.

  No idea how it goes? I want to avoid that from happening.

  Thank you

  Check your tab order and control is enabled is a shortcut bound to it.

• Field to focus on a searchable ListField through the Enter key

  Hi all

  I have one ordered (I use SimpleSortingVector) ListField that contains only strings, so I want to catch (alphanumeric) of essential production factors to target the first item in the list that begins with the Enter key.  I think this can be solved with the indexOf method or the indexOfList method and focus on this area, but don't know how to use both methods. How can I do this? or is there another way to do it please show it...

  Thanks in advanc

  It is actually very easy using indexOfList (.).

  First of all, if you call great or do not ignore it, I think that the treatment will do a "toString" on each getItem, so if the getItem returns the string, you may have to do nothing at all.  However, I found that the default implementation will just before, so I coded so that it will wrap.  The pseudo-code looks like

  for (int i = start + 1; I< listfield.size();="" i++="" )="">

  String testString = the ith index in the ListField

  If {(testStrinag.startsWith (prefix))

  Return i;

  }

  }

  for Int i = 0; I have< start;="" i++="" )="">

  String testString = the ith index in the ListField

  If {(testStrinag.startsWith (prefix))

  Return i;

  }

  }

  back to top; did not find, do not move.

• I bought a legitimate copy of windows and the product key is blocked. This version has also been purchased by microsoft.

  I would like to request a new key product, sent to the e-mail address below that I got from microsoft has been blocked. I'm not impressed by the product you got supplied with. If you can please get in touch as soon as POSSIBLE.

  I'm very disappointed with what I've been delivered.
  contact me via this email;
  E-mail address is removed from the privacy *.
  Thank you very much
  A very unhappy customer.
  Kieran Baker

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• Set the button play to be the same as the Enter key

  Greetings,

  I am using Media Encoder CC 2015 and Encore CS6 Blu - Ray DVD authoring.

  I have a Macbook Pro running 10.11.5 2012 (El Capitan) is

  I find that on the remote, when I press the play button, it does not play the link I have on my Menu Blu - Ray.

  I have to press the Enter key so he could play.

  Is there a way in which I can put the button play to function as the Enter key?

  Thanks in advance for your answer.

  Kind regards

  Tiya

  I think that the answer is not simple. The only control you have is if a particular function is allowed, not how the BD Player interprets the button.

• disable the ENTER KEY on the text element

  All,

  I am trying to disable VALIDATE on the ENTER KEY for a piece of text on a page like below but still his presentation how can I achieve this.

  I want the page to totally disable the entry button so when I press the ENTER KEY, nothing happens.

  what I did:

  1. when the page loads,

  $("input").keypress (function evt) {}

  charCode = evt.charCode var | evt.keyCode;

  If (charCode == 13) {}

  Returns false;

  }

  });

  2.

  When you press enter

  NO.

  APEX 4.2

  Thank you.

  Hello

  Your code is not valid.

  I don't know that it generates errors.

  Put on the page-> Execute JavaScript when loading the Page

  $("input,select").keypress(function(e){
   return e.keyCode!==13;
  });
  

  Kind regards

  Jari

• Hit the Enter key or don't choose "make the work area" no rendering occurs

  I recently migratated all my photos and my projects from one computer to another, a new.

  In collaboration with ss12.

  I'm trying to make a project that I created, but when I press the Enter key, or even to choose "Workspace to return" in the menu timeline, instead of rendering, it reads back the project.

  Anyone know what is happening? Please?

  Hi Love_Green_Turtles,

  Please post on the Adobe forums,

  If the timeline plays instead of rendering, this means that you need not rendering.

  Regrads,

  Sandeep

  Post edited by: Sandeep Singh