ASA 5500 looking for incomplete service policy

Similar Questions

• I have Office SP3 and am looking for XP service packs, but cannot find "Office XP" from the SP; is there a difference, or is that what I already have?

  I do this because I want to download a calendar program requires XP SP2, but I can't really find that no matter what it is called.    Just "Office XP".  I thought that MS is for office and XP are different; because THEY are different.  So I am confused.  Thank you!!!

  See: How to get Windows XP Service Pack 3

• BlackBerry smartphones I'm looking FOR a SERVICE FOR STORM BOOKS

  HI I have a unlock blackberry storm 9530, I try opportunity for Claro society where I can find the servicebooks for this company in the Caribbean, because I need the config of the internet browser so let me know where I can find books of service for any business.

  IF you have your service Claro books extracted, follow the exact instructions in the link below to get the browser works on your Storm:

  http://www.BlackBerryForums.com/General-9500-series-discussion-storm/180267-unlocked-storm-t-t-Mobil...

  In the link, you'll see instructions for the United States with Tmobile and ATT. Just follow the instructions for ATT and insert Claro where you see any reference to the att.

• CSM (Cisco Security Manager) 4.10 error discovery of ASA with service-policy

  Hello

  I have a problem with the CSM 4.10 and ASA. When I try to discover a CSM ASA I get two internal errors:

  Failure of the policy of discovery: com.cisco.nm.vms.discovery.DiscoveryException: internal error

  Exception, important political group: id = 7992934205670, type = PG firewall. InspectRule, name = .fw - namePG.FIREWALL.InspectRule.

  If I remove the global "service-policy global_policy" line, everything works fine.

  I tested ASA 5505 (7.2.5) and ASA 5512 X (9.1.6.11).

  Any suggestions?

  Hello

  You can try with the following solution, please make a backup of the prior agreement of the CSM Database to apply it, in case

  1. stop the daemon manager.

  2 reset the password for the database "vms".

  To do this, open a command prompt in the CSCOpx/bin directory and issue the following command 'perl dbpasswd.pl dsn = npwd = admin vms'

  * This resets the password DB "admin".

  3. to connect to the DB using the utility program.

  4. run the following query.

  5. validate the changes:

  Type 'make' utility and press "run".

  6 close the utility tool, and then restart the daemon manager.

  I would like to know how everything goes, and in the case the issue persists, then open a case with TAC

• When I try to look for a subject of Google... Yahoo... A service of 500 internsal error is MSN...

  500 Internal Service error

  Operating system: Windows XP

  When I try to look for a subject of Google... Yahoo... A service of 500 internsal error is MSN...

  Make sure that your Internet connection doesn't have any static IP DNS address or you're not going through a proxy server.  Also make sure you have any spyware or viruses on your computer blocking all sites.  To do this, you can check your host file to see if web addresses are blocked.

  Your host file should look like this:

  # Copyright (c) 1993-2009 Microsoft Corp.
  #
  # This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
  #
  # This file contains the mappings of IP addresses to host names. Each
  # entry should be kept on an individual line. The IP address must
  # be placed in the first column, followed by the corresponding host name.
  # The IP address and the host name should be separated by at least one
  space #.
  #
  # In addition, comments (such as these) may be inserted on individual
  # lines or following the name of the machine indicated by a symbol "#".
  #
  # For example:
  #
  # 102.54.94.97 rhino.acme.com # source server
  # 38.25.63.10 x.acme.com # x client host

  resolution of name localhost # is handled within DNS itself.
  # 127.0.0.1 localhost

  You can find your file host here:
  C:\Windows\system32\drivers\etc

  Hope this helps and let me know if it works.

  -TheSpaniard

• Where can I download the language packs for Windows XP Professional with service pack 3 installed? I'm looking for French, German, Italian and Spanish.

  I went through the support center of windows looking for updates and downloads, but it's like pulling teeth.  There is no way to refine your search enough to locate the information I need.  I'm looking for language packs for XP Professional with service pack 3.  I need for the French, Italian, German and Spanish language packs.

  I was able to update Windows Vista with these language packs very well manipulated the updater.  Could someone please provide links to these 4 packs of langiage for Windows XP Professional.

  http://www.Microsoft.com/unlimitedpotential/programs/LLP.mspx MS - MVP - Elephant Boy computers - don't panic!

• Looking for dv9933cl of Maintenance and Service of Guide

  I have a dv9933cl that needs a motherboard replacement.  I'm looking for the maintenance and Service Guide (MSG) for this model.

  Normally, the maintenance and Service Guide appears under Guides the user to the system, but appears not to be the case for any dv9900 series laptop PC.

  According to the sticker on the bottom of the laptop, the dv9933cl part of the dv9700 series.  However, the MSG to the dv9700 series (which is also for dv9500 dv9600 series) lists no information for the dv9900 series.

  In my particular case, I need to replace the motherboard, but the part # for the motherboard for the dv9933cl is not listed in the MSG dv9700 (the dv9933cl has a 512 MB NVIDIA video card).  I was able to find the part # (461069-001) on PartSurfer but still need the MSG for the disassembly instructions.

  I confirmed that the MSG dv9500, dv9600/dv9700 works for dv9900 series.  I used it to replace the motherboard and got in trouble or notice any differences.

  However, if you want to party #s, you'll have to use PartSurfer.

  Maybe HP wants to publish this manual in dv9900 series systems.  It would be very helpful!

• Can't install service pack 1, it says its installed, but when you are looking for a new upates he keeps repeating.

  Original title: update replication

  Hey there.  I recently did a factory reset and now I can't seem to install service pack 1... It says its installed but when I search for new upates I get the same so far again and again and again.  any ideas?

  I don't think it is a good update of the service pack, a because it was only 1.9 MB, but every once its installed, I look for new updates and get the same thing.  its driving me crazy.  I can't keep getting my system at a speed without this service pack

  Hi Jools101,

  You can try the following steps and check if it helps:

  Method 1:

  You can check the update history if the Service pack is installed or not. If impossible to install, then checkfor codes error.

  a. click Start, all programsand then click Windows Update or Microsoft Update.

  b. on the Windows Update Web site or on the Microsoft Update Web site, click view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

  c. double-click the update has failed to check the error codes.

  For more information, see the article:

  See the Windows updates are installed

  Method 2:

  You can check the article to reset the Windows Update components and check if it helps.

  How to reset the Windows Update components?

  Important: The above link contains steps to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information, you can view the article:

  Back up the registry

  Also see the article:

  Windows Update or Microsoft Update repeatedly offers the same update

  Method 3:

  You may also refer to article and check if it helps:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  For more information, see the article:

  Learn how to install Windows Vista Service Pack 1 (SP1)

• Looking for Service Pack1 House Promium resettlement due to the system recovery

  I had to do a system restore... From scratch... on my Pavillian Slimline Windows Vista... I can't install IE-9 mail without service pack 2 software after previously being installed in my computer...  However, it is said I can't install service pack 2 until I make sure that I installed the service pack 1... the web site Microsoft says get SP 1 off updates.  He isn't here.   I'm not and I don't know if it's in my computer.  I looked for installation without SP-1 (KB936330), but I can't.   I have a problem with my mail using Yahoo because of this... The site offers only Service Pack 1 to computers (COMPANY).  Not for Home Premium...  SOMEONE KNOWS WHAT TO DO?

  Hello

  CLCK start - right click on computer - then properties - see what 32 bit or 64 bit vista version you have

  Choose your appropriate below bit SP1 version

  they are to be used for individual links OK facilities

  Vista SP1 32 bit download

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=30

  Vista SP1 64-bit download

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=21299

• I am looking for job worm. 1.54 Ontime for Windows Calendar software (by Campbell Services, Inc. a Michigan Corporation is no longer in existence) for Windows 7.

  I am looking for job worm. 1.54 Ontime for Windows Calendar software (by Campbell Services, Inc. a Michigan Corporation is no longer in existence) for Windows 7.

  I started using OnTime when the PC only had MS-DOS, and it worked great!

  Windows came out and I called Campbell and they sent me OnTime for Windows version 1.54 (13 May 1994) I use since then, throughout all versions of Windows XP - until what I got new computers with Windows 7, which OnTime install not on :(

  I want to continue using OnTime for Windows, now with Windows 7 - please HELP!  Thank you!!!

  Hi Theodore

  I doubt if you will find this particular version of Ontime, which works on Windows 7.

  Services of Campbell sold out in 1996 and the Ontime product has been sold and resold several times since then.

  Here is a link to the current owner.

  More about OnTime planning:
  http://ontimesuite.com/

  Concerning

• Windows Service host process has stopped working... online and are looking for a solution

  I have a Lenove with Windows 7 Home Premium 64-bit of the system.  Yesterday I got stuck in a loop while looking for a dog boarding on Google.  I had to do a system shutdown to break out of the loop.  Since then, I get the message: «Host process for Windows services has stopped working...» "Also, I heard the music or script play twice since then and did a reboot to get rid of the problem.  I don't know that it will continue if I do not resolve what has caused the problem initially.  Also, I went into the control panel one checked all the sound icons and they are all OK.

  I'd appreciate if someone could give me some instructions on how to solve these problems.  Thank you!!

  Click on Start and open the Control Panel
  Click on System and select Advanced system settings in the left menu.
  Under performance, click settings.
  Click the Data Execution Prevention tab, then enable DEP for all programs and services except those I select.
  Select the check box next to the program that you want to turn off DEP for and then click OK.
  For older (if you want to turn off DEP for IE. Click Add: enter OS 32 bit (Internet program
  The Explorer and select iexplorer.exe) | 64 bit OS (Program Files (x 86) \Internet explore and select iexplorer.exe)
  Select the check box next to the program that you want to turn off DEP for and then click OK.
  Restart the PC and use the IE32 again
  Note: You can not set DEP to 64 bit IE

• Step how to configure ASA 5500 Series Security Services Module-10 (model: ASA-SSM-10)

  Dear support,

  I need to configure Security Services Module-10 (model: ASA-SSM-10) on my ASA 5510 firewall. Could you provide configuration step and how to connect to the module?

  Here is the information on the module

  ciscoasa (config) # sh Details of module 1
  The details of the Service module, please wait...
  ASA 5500 Series Security Services Module-10
  Model: ASA-SSM-10
  Hardware version: 1.0
  Serial number: JAF1115066U
  Firmware version: 1.0 (11) 2
  Software version: 1.0000 E1
  MAC address range: 001a.e268.5aa9 to 001a.e268.5aa9
  App name: IPS
  App status. : to the top
  App status. / / Desc:
  App version: 1.0000 E1
  Data of aircraft status: Up
  Status: to the top
  Mgmt IP addr: 133.1.9.144
  Web to MGMT ports: 443
  Mgmt TLS enabled: true

  your help is very appreciate.

  Thank you

  Best regards

  Hi Sothengse,

  Please find the samlpe on AIP SSM module configurations. You can go through this to begin with.

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

  https://www.YouTube.com/watch?v=FgYU5ZXwk4g

  Concerning

  Knockaert

• "Sorry, we could not connect to the Microsoft services right now. If the problem persists, look for 'referee' on the start screen.

  "Sorry, we could not connect to the Microsoft services right now. If the problem persists, look for 'referee' on the start screen.

  This appears when I try to connect with Microsoft Account.

  I tried all the possibilities that was displayed in the link but when even the problem exists... below you please suggest me the solution to add the microsoft account

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-networking/sorry-we-couldn

  Hi Nikhil,

  If you connect through a proxy, then I suggest you to try the steps suggested in this article and checking:

  http://support.Microsoft.com/kb/2778122/en-us

  Keep us updated on the results.

• I'm looking for the relationship between the unit ORGANIZATION and self-service workflow?

  Hi all:
  I have 3 UO and 3 files of wft different workflow self-service in the my HR system. How can I know the relationship between the unit ORGANIZATION and self-service workflow? I mean what wft file corresponds to an ORGANIZATIONAL unit?
  
  my environment is oracle 11.5.9. self-service 4.1 | workflow Builder 2.6
  
  for example:
  OR 1 = > HRSSA1.wft
  
  OR 2 = > HRSSA3.wft
  
  OR 3 = > HRSSA2.wft
  
  I'm looking for this relationship?
  
  
  Concerning
  Terry

  Terry,

  I mean what wft file corresponds to an ORGANIZATIONAL unit?

  Open the workflow designer using wft files and see if you can find any reference to these OUs.

  Thank you
  Hussein

• Windows task manager looks completely wrong-it has no tabs for applications, services, processes, performance and put in a network, just a box of size rectangle TASKS WORKING ON?

  The Windows Task Manager seems completely wrong - it has no tabs for applications, services, processes, performance and networking, just one size rectangle box SHOW the TASKS of WORKING ON?  I use it all the time close process and close programs stuborn. None of these options are CURRENTLY available? The only thing I can think is I went to delete one of my readers WD3.0 data and he says it has been used by another program and I've had that happen before and just go close a lot of the process by typing Control, Alt and delete which opens the windows task manager. I recently changed "System Configuration'under'msconfig" Normal startup to "selective startup" and reduce the number of drivers and programs loading to 'Start Up', as he ran 90 things and slow start. "" "» I have no viruses or malware. I changed the "system configuration" back to normal + restart and that he would remove the progams, or processes that have been intefering with the Western Digital HD software. THIS IS WHEN I FIRST NOTICED WINDOWS TASK MANAGER HAS BEEN SCREWED UP.

  But I can't because my Windows Task Manager is just a rectangular box with a single word to the top sayingTASKS!  Without tab with all the other options as in (program, process, services, performance, and network management).

  Would BE AN INTELLIGENT PERSON please TELL ME WHAT TO? I don't want to do a system restore , as I just cleaned it all points this week and just started around and added a bunch of programs and data this week that I let go.

  PLEASE HELP ME TECHE AND MICROSOFT. I PAY $250 p/year FOR THIS DELL ALIENWARE MACHINE LOADED due to it's PERFORMANCE AND THEY WILL NOT ANSWER (1) DANG SOFTWARE ISSUE WITH what THEY ARE PAID. THEY WANT $60 - $100 OR MORE TO ANSWER THIS QESTION FRENCH ANOTER. THEY USED TO, WHEN I COULD BUY GOLD SUPPORT BUT THEY SELL ON THIS MACHINE, SO I'M ON MY OWN AND THANKS FOR THE ADVICE LIKE THIS...

  The Microsoft Support web site.

  The task manager has two different views. For the display that includes menus and tabs, double-click the border of the Task Manager window. To return to the view without menus and tabs, double-click anywhere in the border around the tabs.

  We won't have the information mentioned in the first response of Sandsweep.

  (I confirmed Microsoft's answer worked.) I must have clicked on the edge of the window Task Manager to have switched over to the second, less familiar view.)