ASA 5510 limit Session 2 Error Message
In ASDM I am trying to set the maximum number of SSL Sessions. According to the documentation by my Cisco ASA 5510 Cisco should withstand 250 concurrent SSL VPN sessions. But if you check my screen shot you will see that my ASA does not allow more than 1 or 2! What is happening with this?
http://www-search.Cisco.com/en/us/docs/security/ASDM/6_1/user/guide/vpn_web.PDF
What Miss me? I'm under SMDA 6.2 and the image is 8.21.
Hello
All ASA models (including the 5510), is compatible with only 2 connections VPN SSL factory.
Indeed, the SAA can support up to 250 VPN SSL connections, but for that, you must purchase an additional license.
Check out more information on the data sheet:
Federico.
Tags: Cisco Security
Similar Questions
-
% 7-ASA-710005: request TCP thrown error in the Client VPN Site to CISCO ASA 5510
Hi friends,
I am trying to built customer to site VPN CISCO ASA 5510 8.4 (4) and get error below when connecting to a cisco VPN client software. Also, I'm below ASA, log. Please help me to reslove.
Error in CISCO VPN Client software:
Secure VPN connection terminated locally by the client.
Reason: 414: unable to establish a TCP connection.
Error in CISCO ASA 5510
7-ASA-710005%: TCP request and eliminated from
49276 outward: 10000 The ASA configuration:
XYZ # sh run
: Saved
:
ASA Version 8.4 (4)
!
hostname XYZ
domain XYZ
activate the password encrypted 3uLkVc9JwRA1/OXb N3
activate the encrypted password of R/x90UjisGVJVlh2
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Ethernet0/0
nameif outside_rim
security-level 0
IP 1.1.1.1 255.255.255.252
!
interface Ethernet0/1
full duplex
nameif XYZ_DMZ
security-level 50
IP 172.1.1.1 255.255.255.248
!
interface Ethernet0/2
Speed 100
full duplex
nameif outside
security-level 0
IP address 2.2.2.2 255.255.255.252
!
interface Ethernet0/3
Speed 100
full duplex
nameif inside
security-level 100
IP 3.3.3.3 255.255.255.224
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
!
boot system Disk0: / asa844 - k8.bin
passive FTP mode
DNS domain-lookup outside
DNS server-group DefaultDNS
Server name xx.xx.xx.xx
Server name xx.xx.xx.xx
Server name xx.xx.xx.xx
Server name xx.xx.xx.xx
domain XYZ
network object obj - 172.17.10.3
Home 172.17.10.3
network object obj - 10.1.134.0
10.1.134.0 subnet 255.255.255.0
network object obj - 208.75.237.0
208.75.237.0 subnet 255.255.255.0
network object obj - 10.7.0.0
10.7.0.0 subnet 255.255.0.0
network object obj - 172.17.2.0
172.17.2.0 subnet 255.255.255.0
network object obj - 172.17.3.0
172.17.3.0 subnet 255.255.255.0
network object obj - 172.19.2.0
172.19.2.0 subnet 255.255.255.0
network object obj - 172.19.3.0
172.19.3.0 subnet 255.255.255.0
network object obj - 172.19.7.0
172.19.7.0 subnet 255.255.255.0
network object obj - 10.1.0.0
10.1.0.0 subnet 255.255.0.0
network object obj - 10.2.0.0
10.2.0.0 subnet 255.255.0.0
network object obj - 10.3.0.0
10.3.0.0 subnet 255.255.0.0
network object obj - 10.4.0.0
10.4.0.0 subnet 255.255.0.0
network object obj - 10.6.0.0
10.6.0.0 subnet 255.255.0.0
network object obj - 10.9.0.0
10.9.0.0 subnet 255.255.0.0
network object obj - 10.11.0.0
10.11.0.0 subnet 255.255.0.0
network object obj - 10.12.0.0
10.12.0.0 subnet 255.255.0.0
network object obj - 172.19.1.0
172.19.1.0 subnet 255.255.255.0
network object obj - 172.21.2.0
172.21.2.0 subnet 255.255.255.0
network object obj - 172.16.2.0
172.16.2.0 subnet 255.255.255.0
network object obj - 10.19.130.201
Home 10.19.130.201
network object obj - 172.30.2.0
172.30.2.0 subnet 255.255.255.0
network object obj - 172.30.3.0
172.30.3.0 subnet 255.255.255.0
network object obj - 172.30.7.0
172.30.7.0 subnet 255.255.255.0
network object obj - 10.10.1.0
10.10.1.0 subnet 255.255.255.0
network object obj - 10.19.130.0
10.19.130.0 subnet 255.255.255.0
network of object obj-XXXXXXXX
host XXXXXXXX
network object obj - 145.248.194.0
145.248.194.0 subnet 255.255.255.0
network object obj - 10.1.134.100
Home 10.1.134.100
network object obj - 10.9.124.100
Home 10.9.124.100
network object obj - 10.1.134.101
Home 10.1.134.101
network object obj - 10.9.124.101
Home 10.9.124.101
network object obj - 10.1.134.102
Home 10.1.134.102
network object obj - 10.9.124.102
Home 10.9.124.102
network object obj - 115.111.99.133
Home 115.111.99.133
network object obj - 10.8.108.0
10.8.108.0 subnet 255.255.255.0
network object obj - 115.111.99.129
Home 115.111.99.129
network object obj - 195.254.159.133
Home 195.254.159.133
network object obj - 195.254.158.136
Home 195.254.158.136
network object obj - 209.164.192.0
subnet 209.164.192.0 255.255.224.0
network object obj - 209.164.208.19
Home 209.164.208.19
network object obj - 209.164.192.126
Home 209.164.192.126
network object obj - 10.8.100.128
subnet 10.8.100.128 255.255.255.128
network object obj - 115.111.99.130
Home 115.111.99.130
network object obj - 10.10.0.0
subnet 10.10.0.0 255.255.0.0
network object obj - 115.111.99.132
Home 115.111.99.132
network object obj - 10.10.1.45
Home 10.10.1.45
network object obj - 10.99.132.0
10.99.132.0 subnet 255.255.255.0
the Serversubnet object-group network
object-network 10.10.1.0 255.255.255.0
network-object 10.10.5.0 255.255.255.192
the XYZ_destinations object-group network
object-network 10.1.0.0 255.255.0.0
object-network 10.2.0.0 255.255.0.0
network-object 10.3.0.0 255.255.0.0
network-object 10.4.0.0 255.255.0.0
network-object 10.6.0.0 255.255.0.0
network-object 10.7.0.0 255.255.0.0
network-object 10.11.0.0 255.255.0.0
object-network 10.12.0.0 255.255.0.0
object-network 172.19.1.0 255.255.255.0
object-network 172.19.2.0 255.255.255.0
object-network 172.19.3.0 255.255.255.0
object-network 172.19.7.0 255.255.255.0
object-network 172.17.2.0 255.255.255.0
object-network 172.17.3.0 255.255.255.0
object-network 172.16.2.0 255.255.255.0
object-network 172.16.3.0 255.255.255.0
host of the object-Network 10.50.2.206
the XYZ_us_admin object-group network
network-object 10.3.1.245 255.255.255.255
network-object 10.5.33.7 255.255.255.255
network-object 10.211.5.7 255.255.255.255
network-object 10.3.33.7 255.255.255.255
network-object 10.211.3.7 255.255.255.255
the XYZ_blr_networkdevices object-group network
object-network 10.200.10.0 255.255.255.0
access list XYZ extended ip 10.19.130.0 allow 255.255.255.0 145.248.194.0 255.255.255.0
access list XYZ extended ip 10.19.130.0 allow 255.255.255.0 host 172.16.2.21
access list XYZ extended ip 10.19.130.0 allow 255.255.255.0 host 172.16.2.22
access list XYZ extended ip 10.19.130.0 allow 255.255.255.0 host XXXXXXXX
Access extensive list ip 10.19.130.0 XYZ_PAT allow 255.255.255.0 any
Access extensive list ip 10.1.134.0 XYZ_PAT allow 255.255.255.0 host 195.254.159.133
Access extensive list ip 10.1.134.0 XYZ_PAT allow 255.255.255.0 host 195.254.158.136
Access extensive list ip 10.1.134.0 XYZ_PAT allow 255.255.255.0 any
Access extensive list ip 10.1.134.0 XYZ_PAT allow 255.255.255.0 209.164.192.0 255.255.224.0
Access extensive list ip 10.1.134.0 XYZ_PAT allow 255.255.255.0 host 209.164.208.19
Access extensive list ip 10.1.134.0 XYZ_PAT allow 255.255.255.0 host 209.164.192.126
IP 10.1.134.0 allow Access-list extended sheep 255.255.255.0 208.75.237.0 255.255.255.0
Allow Access-list extended sheep 255.255.255.0 10.1.134.0 IP 10.7.0.0 255.255.0.0
IP 10.1.134.0 allow Access-list extended sheep 255.255.255.0 172.17.2.0 255.255.255.0
IP 10.1.134.0 allow Access-list extended sheep 255.255.255.0 172.17.3.0 255.255.255.0
IP 10.1.134.0 allow Access-list extended sheep 255.255.255.0 172.19.2.0 255.255.255.0
IP 10.1.134.0 allow Access-list extended sheep 255.255.255.0 172.19.3.0 255.255.255.0
IP 10.1.134.0 allow Access-list extended sheep 255.255.255.0 172.19.7.0 255.255.255.0
10.1.134.0 IP Access-list extended sheep 255.255.255.0 allow 10.1.0.0 255.255.0.0
10.1.134.0 IP Access-list extended sheep 255.255.255.0 allow 10.2.0.0 255.255.0.0
Allow Access-list extended sheep 255.255.255.0 10.1.134.0 IP 10.3.0.0 255.255.0.0
10.1.134.0 IP Access-list extended sheep 255.255.255.0 allow 10.4.0.0 255.255.0.0
10.1.134.0 IP Access-list extended sheep 255.255.255.0 allow 10.6.0.0 255.255.0.0
Allow Access-list extended sheep 255.255.255.0 10.1.134.0 IP 10.9.0.0 255.255.0.0
Allow Access-list extended sheep 255.255.255.0 10.1.134.0 IP 10.11.0.0 255.255.0.0
10.1.134.0 IP Access-list extended sheep 255.255.255.0 allow 10.12.0.0 255.255.0.0
IP 10.1.134.0 allow Access-list extended sheep 255.255.255.0 172.19.1.0 255.255.255.0
IP 10.1.134.0 allow Access-list extended sheep 255.255.255.0 172.21.2.0 255.255.255.0
10.1.134.0 IP Access-list extended sheep 255.255.255.0 allow 172.16.2.0 255.255.255.0
access-list extended sheep allowed host ip 10.19.130.201 172.30.2.0 255.255.255.0
access-list extended sheep allowed host ip 10.19.130.201 172.30.3.0 255.255.255.0
access-list extended sheep allowed host ip 10.19.130.201 172.30.7.0 255.255.255.0
access-list extended sheep allowed ip object-group Serversubnet-group of objects XYZ_destinations
10.10.1.0 IP Access-list extended sheep 255.255.255.0 allow 10.2.0.0 255.255.0.0
10.19.130.0 IP Access-list extended sheep 255.255.255.0 allow host XXXXXXXX
IP 10.19.130.0 allow Access-list extended sheep 255.255.255.0 145.248.194.0 255.255.255.0
Access extensive list ip 10.8.108.0 Guest_PAT allow 255.255.255.0 any
CACIB list extended access permitted ip 10.8.100.128 255.255.255.128 145.248.194.0 255.255.255.0
Access extensive list ip 10.8.100.128 Cacib_PAT allow 255.255.255.128 all
Access extensive list ip 10.1.134.0 New_Edge allow 255.255.255.0 208.75.237.0 255.255.255.0
Allow XYZ_global to access extended list ip 10.7.0.0 255.255.0.0 10.1.134.0 255.255.255.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 10.7.0.0 255.255.0.0
Access extensive list ip 172.17.2.0 XYZ_global allow 255.255.255.0 10.1.134.0 255.255.255.0
Access extensive list ip 172.17.3.0 XYZ_global allow 255.255.255.0 10.1.134.0 255.255.255.0
Access extensive list ip 172.19.2.0 XYZ_global allow 255.255.255.0 10.1.134.0 255.255.255.0
Access extensive list ip 172.19.3.0 XYZ_global allow 255.255.255.0 10.1.134.0 255.255.255.0
Access extensive list ip 172.19.7.0 XYZ_global allow 255.255.255.0 10.1.134.0 255.255.255.0
Access extensive list ip 10.1.0.0 XYZ_global allow 255.255.0.0 10.1.134.0 255.255.255.0
Access extensive list 10.2.0.0 ip XYZ_global 255.255.0.0 allow 10.1.134.0 255.255.255.0
Allow XYZ_global to access extended list ip 10.3.0.0 255.255.0.0 10.1.134.0 255.255.255.0
Access extensive list 10.4.0.0 ip XYZ_global 255.255.0.0 allow 10.1.134.0 255.255.255.0
Access extensive list 10.6.0.0 ip XYZ_global 255.255.0.0 allow 10.1.134.0 255.255.255.0
Access extensive list ip 10.9.0.0 XYZ_global allow 255.255.0.0 10.1.134.0 255.255.255.0
Allow XYZ_global to access extended list ip 10.11.0.0 255.255.0.0 10.1.134.0 255.255.255.0
Access extensive list 10.12.0.0 ip XYZ_global 255.255.0.0 allow 10.1.134.0 255.255.255.0
Access extensive list ip 172.19.1.0 XYZ_global allow 255.255.255.0 10.1.134.0 255.255.255.0
Access extensive list ip 172.21.2.0 XYZ_global allow 255.255.255.0 10.1.134.0 255.255.255.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 172.17.2.0 255.255.255.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 172.17.3.0 255.255.255.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 172.19.2.0 255.255.255.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 172.19.3.0 255.255.255.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 172.19.7.0 255.255.255.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 10.1.0.0 255.255.0.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 10.2.0.0 255.255.0.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 10.3.0.0 255.255.0.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 10.4.0.0 255.255.0.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 10.6.0.0 255.255.0.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 10.9.0.0 255.255.0.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 10.11.0.0 255.255.0.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 10.12.0.0 255.255.0.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 172.19.1.0 255.255.255.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 172.21.2.0 255.255.255.0
XYZ_global to access extended list ip 172.16.2.0 allow 255.255.255.0 10.1.134.0 255.255.255.0
Access extensive list ip 10.1.134.0 XYZ_global allow 255.255.255.0 172.16.2.0 255.255.255.0
Access extensive list ip 172.30.2.0 XYZ_global allow 255.255.255.0 host 10.19.130.201
XYZ_global list extended access allowed host ip 10.19.130.201 172.30.2.0 255.255.255.0
Access extensive list ip 172.30.3.0 XYZ_global allow 255.255.255.0 host 10.19.130.201
XYZ_global list extended access allowed host ip 10.19.130.201 172.30.3.0 255.255.255.0
Access extensive list ip 172.30.7.0 XYZ_global allow 255.255.255.0 host 10.19.130.201
XYZ_global list extended access allowed host ip 10.19.130.201 172.30.7.0 255.255.255.0
XYZ_global list extended access permitted ip object-group Serversubnet-group of objects XYZ_destinations
XYZ_global list extended access permitted ip object-group XYZ_destinations-group of objects Serversubnet
ML_VPN list extended access allowed host ip 115.111.99.129 209.164.192.0 255.255.224.0
permit access list extended ip host 115.111.99.129 ML_VPN 209.164.208.19
permit access list extended ip host 115.111.99.129 ML_VPN 209.164.192.126
permit access list extended ip host 10.9.124.100 Da_VPN 10.125.81.88
permit access list extended ip host 10.9.124.101 Da_VPN 10.125.81.88
permit access list extended ip host 10.9.124.102 Da_VPN 10.125.81.88
Da_VPN list extended access allowed host ip 10.9.124.100 10.125.81.0 255.255.255.0
Da_VPN list extended access allowed host ip 10.9.124.101 10.125.81.0 255.255.255.0
Da_VPN list extended access allowed host ip 10.9.124.102 10.125.81.0 255.255.255.0
Sr_PAT to access extended list ip 10.10.0.0 allow 255.255.0.0 any
Da_Pd_VPN list extended access allowed host ip 10.9.124.100 10.125.80.64 255.255.255.192
Da_Pd_VPN list extended access allowed host ip 10.9.124.100 10.125.64.0 255.255.240.0
permit access list extended ip host 10.9.124.100 Da_Pd_VPN 10.125.85.46
permit access list extended ip host 10.9.124.100 Da_Pd_VPN 10.125.86.46
Da_Pd_VPN list extended access allowed host ip 10.9.124.101 10.125.80.64 255.255.255.192
Da_Pd_VPN list extended access allowed host ip 10.9.124.101 10.125.64.0 255.255.240.0
permit access list extended ip host 10.9.124.101 Da_Pd_VPN 10.125.85.46
permit access list extended ip host 10.9.124.101 Da_Pd_VPN 10.125.86.46
Da_Pd_VPN list extended access allowed host ip 10.9.124.102 10.125.80.64 255.255.255.192
Da_Pd_VPN list extended access allowed host ip 10.9.124.102 10.125.64.0 255.255.240.0
permit access list extended ip host 10.9.124.102 Da_Pd_VPN 10.125.85.46
permit access list extended ip host 10.9.124.102 Da_Pd_VPN 10.125.86.46
Access extensive list ip 10.19.130.0 XYZ_reliance allow 255.255.255.0 145.248.194.0 255.255.255.0
access-list coextended permit ip host 2.2.2.2 XXXXXXXX
access-list coextended allow the host ip XXXXXXXXhost 2.2.2.2
permitted this access list extended ip 10.1.134.0 255.255.255.0 208.75.237.0 255.255.255.0
permitted this access list extended ip 208.75.237.0 255.255.255.0 10.1.134.0 255.255.255.0
access list acl-outside extended permit ip host 57.66.81.159 172.17.10.3
access list acl-outside extended permit ip host 80.169.223.179 172.17.10.3
access list acl-outside scope permit ip any host 172.17.10.3
access list acl-outside extended permitted tcp any host 10.10.1.45 eq https
access list acl-outside extended permit tcp any any eq 10000
access list acl-outside extended deny ip any any newspaper
pager lines 10
Enable logging
debug logging in buffered memory
outside_rim MTU 1500
MTU 1500 XYZ_DMZ
Outside 1500 MTU
Within 1500 MTU
IP pool local XYZ_c2s_vpn_pool 172.30.10.51 - 172.30.10.254
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow all outside
ICMP allow any inside
don't allow no asdm history
ARP timeout 14400
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 208.75.237.0 obj - 208.75.237.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 10.7.0.0 obj - 10.7.0.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 172.17.2.0 obj - 172.17.2.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 172.17.3.0 obj - 172.17.3.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 172.19.2.0 obj - 172.19.2.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 172.19.3.0 obj - 172.19.3.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 172.19.7.0 obj - 172.19.7.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 10.1.0.0 obj - 10.1.0.0 non-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 10.2.0.0 obj - 10.2.0.0 non-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 10.3.0.0 obj - 10.3.0.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 10.4.0.0 obj - 10.4.0.0 non-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 10.6.0.0 obj - 10.6.0.0 non-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 10.9.0.0 obj - 10.9.0.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 10.11.0.0 obj - 10.11.0.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 10.12.0.0 obj - 10.12.0.0 non-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 172.19.1.0 obj - 172.19.1.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 172.21.2.0 obj - 172.21.2.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.1.134.0 obj - 10.1.134.0 destination static obj - 172.16.2.0 obj - 172.16.2.0 non-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.19.130.201 obj - 10.19.130.201 destination static obj - 172.30.2.0 obj - 172.30.2.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.19.130.201 obj - 10.19.130.201 destination static obj - 172.30.3.0 obj - 172.30.3.0 no-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.19.130.201 obj - 10.19.130.201 destination static obj - 172.30.7.0 obj - 172.30.7.0 no-proxy-arp-search to itinerary
NAT (inside, all) static source Serversubnet Serversubnet XYZ_destinations XYZ_destinations non-proxy-arp-search of route static destination
NAT (inside, all) source static obj - 10.10.1.0 obj - 10.10.1.0 destination static obj - 10.2.0.0 obj - 10.2.0.0 non-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.19.130.0 obj - 10.19.130.0 destination static obj-XXXXXXXX XXXXXXXX - obj non-proxy-arp-search to itinerary
NAT (inside, all) source static obj - 10.19.130.0 obj - 10.19.130.0 destination static obj - 145.248.194.0 obj - 145.248.194.0 no-proxy-arp-search to itinerary
NAT source (indoor, outdoor), obj static obj - 10.1.134.100 - 10.9.124.100
NAT source (indoor, outdoor), obj static obj - 10.1.134.101 - 10.9.124.101
NAT source (indoor, outdoor), obj static obj - 10.1.134.102 - 10.9.124.102
NAT interface dynamic obj - 10.8.108.0 source (indoor, outdoor)
NAT (inside, outside) source dynamic obj - 10.19.130.0 obj - 115.111.99.129
NAT (inside, outside) source dynamic obj - 10.1.134.0 obj - 115.111.99.129 destination static obj - 195.254.159.133 obj - 195.254.159.133
NAT (inside, outside) source dynamic obj - 10.1.134.0 obj - 115.111.99.129 destination static obj - 195.254.158.136 obj - 195.254.158.136
NAT (inside, outside) source dynamic obj - 10.1.134.0 obj - 115.111.99.129
NAT (inside, outside) source dynamic obj - 10.1.134.0 obj - 115.111.99.129 destination static obj - 209.164.192.0 obj - 209.164.192.0
NAT (inside, outside) source dynamic obj - 10.1.134.0 obj - 115.111.99.129 destination static obj - 209.164.208.19 obj - 209.164.208.19
NAT (inside, outside) source dynamic obj - 10.1.134.0 obj - 115.111.99.129 destination static obj - 209.164.192.126 obj - 209.164.192.126
NAT (inside, outside) source dynamic obj - 10.8.100.128 obj - 115.111.99.130
NAT (inside, outside) source dynamic obj - 10.10.0.0 obj - 115.111.99.132
NAT source (indoor, outdoor), obj static obj - 10.10.1.45 - 115.111.99.133
NAT (inside, outside) source dynamic obj - 10.99.132.0 obj - 115.111.99.129
!
network object obj - 172.17.10.3
NAT (XYZ_DMZ, outside) static 115.111.99.134
Access-group acl-outside in external interface
Route outside 0.0.0.0 0.0.0.0 115.111.23.129 1
Route outside 0.0.0.0 0.0.0.0 115.254.127.130 10
Route inside 10.10.0.0 255.255.0.0 10.8.100.1 1
Route inside 10.10.1.0 255.255.255.0 10.8.100.1 1
Route inside 10.10.5.0 255.255.255.192 10.8.100.1 1
Route inside 10.8.100.128 255.255.255.128 10.8.100.1 1
Route inside 10.8.108.0 255.255.255.0 10.8.100.1 1
Route inside 10.19.130.0 255.255.255.0 10.8.100.1 1
Route inside 10.99.4.0 255.255.255.0 10.99.130.254 1
Route inside 10.99.132.0 255.255.255.0 10.8.100.1 1
Route inside 10.1.134.0 255.255.255.0 10.8.100.1 1
Route outside 208.75.237.0 255.255.255.0 115.111.23.129 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication LOCAL telnet console
LOCAL AAA authorization command
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-aes-256 ikev1, esp-sha-hmac vpn2
Crypto ipsec transform-set esp-aes-256 ikev1, esp-md5-hmac vpn6
Crypto ipsec transform-set esp-aes-256 ikev1, esp-sha-hmac vpn5
Crypto ipsec transform-set esp-aes-256 ikev1, esp-md5-hmac vpn7
Crypto ipsec transform-set esp-aes-256 ikev1, esp-sha-hmac vpn4
Crypto ipsec transform-set esp-aes-256 ikev1, esp-sha-hmac vpn1
Crypto ipsec transform-set esp-aes-256 ikev1, esp-sha-hmac vpn_reliance
Crypto ipsec transform-set esp-3des esp-md5-hmac ikev1 c2s_vpn
86400 seconds, duration of life crypto ipsec security association
Crypto-map dynamic dyn1 ikev1 transform-set c2s_vpn 1 set
Crypto-map dynamic dyn1 1jeu reverse-road
card crypto vpn 1 corresponds to the address XYZ
card 1 set of peer XYZ Peer IP vpn crypto
1 set transform-set vpn1 ikev1 vpn crypto card
card crypto vpn 1 lifetime of security set association, 3600 seconds
card crypto vpn 1 set security-association life kilobytes 4608000
correspondence vpn crypto card address 2 DON'T
2 peer NE_Peer IP vpn crypto card game
2 set transform-set vpn2 ikev1 vpn crypto card
3600 seconds, duration of life card crypto vpn 2 set security-association
card crypto vpn 2 set security-association life kilobytes 4608000
card crypto vpn 4 corresponds to the address ML_VPN
card crypto vpn 4 set pfs
vpn crypto card game 4 peers ML_Peer IP
4 set transform-set vpn4 ikev1 vpn crypto card
3600 seconds, duration of life card crypto vpn 4 set - the security association
card crypto vpn 4 set security-association life kilobytes 4608000
vpn crypto card 5 corresponds to the address XYZ_global
vpn crypto card game 5 peers XYZ_globa_Peer IP
5 set transform-set vpn5 ikev1 vpn crypto card
3600 seconds, duration of life card crypto vpn 5 set - the security association
card 5 security-association life set vpn crypto kilobytes 4608000
vpn crypto card 6 corresponds to the address Da_VPN
vpn crypto card game 6 peers Da_VPN_Peer IP
6 set transform-set vpn6 ikev1 vpn crypto card
3600 seconds, duration of life card crypto vpn 6 set - the security association
card crypto vpn 6 set security-association life kilobytes 4608000
vpn crypto card 7 corresponds to the address Da_Pd_VPN
7 peer Da_Pd_VPN_Peer IP vpn crypto card game
7 set transform-set vpn6 ikev1 vpn crypto card
3600 seconds, duration of life card crypto vpn 7 set - the security association
card crypto vpn 7 set security-association life kilobytes 4608000
vpn outside crypto map interface
crypto map vpn_reliance 1 corresponds to the address XYZ_rim
card crypto vpn_reliance 1 set of peer XYZ_rim_Peer IP
card crypto 1 ikev1 transform-set vpn_reliance set vpn_reliance
vpn_reliance card crypto 1 lifetime of security set association, 3600 seconds
card crypto vpn_reliance 1 set security-association life kilobytes 4608000
card crypto vpn_reliance interface outside_rim
dynamic mymap 1 dyn1 ipsec-isakmp crypto map
crypto isakmp identity address
No encryption isakmp nat-traversal
Crypto ikev1 enable outside_rim
Crypto ikev1 allow outside
IKEv1 crypto policy 1
preshared authentication
aes-256 encryption
sha hash
Group 5
lifetime 28800
IKEv1 crypto policy 2
preshared authentication
aes-256 encryption
sha hash
Group 5
life 86400
IKEv1 crypto policy 4
preshared authentication
aes-256 encryption
sha hash
Group 5
life 28000
IKEv1 crypto policy 5
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
preshared authentication
3des encryption
sha hash
Group 2
life 43200
IKEv1 crypto policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet 10.8.100.0 255.255.255.224 inside
Telnet timeout 5
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0
no basic threat threat detection
no statistical access list - a threat detection
no statistical threat detection tcp-interception
internal XYZ_c2s_vpn group strategy
username testadmin encrypted password oFJjANE3QKoA206w
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group ipsec-attributes XXXXXXXX
IKEv1 pre-shared-key *.
tunnel-group XXXXXXXXtype ipsec-l2l
tunnel-group XXXXXXXXipsec-attributes
IKEv1 pre-shared-key *.
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group ipsec-attributes XXXXXXXX
IKEv1 pre-shared-key *.
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group ipsec-attributes XXXXXXXX
IKEv1 pre-shared-key *.
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group ipsec-attributes XXXXXXXX
IKEv1 pre-shared-key *.
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group ipsec-attributes XXXXXXXX
IKEv1 pre-shared-key *.
tunnel-group XXXXXXXX type ipsec-l2l
tunnel-group ipsec-attributes XXXXXXXX
IKEv1 pre-shared-key *.
type tunnel-group XYZ_c2s_vpn remote access
attributes global-tunnel-group XYZ_c2s_vpn
address pool XYZ_c2s_vpn_pool
IPSec-attributes tunnel-group XYZ_c2s_vpn
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp
Review the ip options
!
global service-policy global_policy
level 3 privilege see the running-config command exec mode
logging of orders privilege see the level 3 exec mode
privilege see the level 3 exec mode command crypto
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:caa7476cd348ed89b95d37d4e3c9e1d8
: endXYZ #.
Good news
Follow these steps:
network object obj - 172.30.10.0_24
172.30.10.0 subnet 255.255.255.0
!
the LOCAL_NETWORKS_VPN object-group network
object-network 1.1.1.0 255.255.255.0
!
NAT (inside, outside) 1 static source LOCAL_NETWORKS_VPN destination LOCAL_NETWORKS_VPN static obj - 172.30.10.0_24 obj - 172.30.10.0_24 - route search
* Where 1.1.1.0/24 is the internal network that you want to reach through the tunnel.
Keep me posted.
Thank you.
Please note all messages that will be useful.
-
Yahoo home page, I click on an article to read. If the item has a video I get the following error message: "your browser has requested that this server could not understand.
A request header field exceeds server limit. »
Does not happen with all videos.
This problem may be caused by corrupted cookies.
Clear the cache and cookies from sites that cause problems.
"Clear the Cache":
- Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
'Delete Cookies' sites causing problems:
- Tools > Options > privacy > Cookies: "show the Cookies".
-
IMac using Firefox 8 and Yahoo as a homepage. When I click on a link of news it brings up the error message next - "your browser has requested that this server could not understand. A request header field exceeds server limit. When I use Safari it is no problem.
I did as b ^ 24554 and cleared out the cache and cookies and the problem seems to be resolved. Thank you.
-
Satellite Pro P100 - error message-"unable to get session notifications.
Everytime I turn it on I get the error message "unable to get session notifications.
What is c?
How difficult or turn it off?Thank you
Hmm... It looks like a 3rd party software notification.
You may have removed (uninstalled) a program, but the registry contains some bad entries that cause this strange notification.You know the free app "CCleaner"? It repairs and cleans them registry and system files. Maybe this program might help to get rid of this message...
Good luck
-
All in one printer 5510: old printer at startup error message
Hi all, I recently upgraded my printer Photosmart 5510 to 5540 desire. I installed a new printer and removed the old. Since then, I get this error message whenever I start the computer:
There is a problem starting: C:\Program Files\HP\HPPhotosmart5510series\bin\HPStatus BL.dll
The specific module could not be found
I tried to reinstall the old printer, I deleted again, I went through HP troubleshooting... nothing!
Someone has an idea? Thanks for your help.
Hello
From file Exploer type %appdata%\Microsoft\Windows\Start Menu\Programs\Startup in the address bar and press ENTER.
Delete the shortcut to monitor alerts for Non-Existing printer ink and the error should appear is no longer.Kind regards
Shlomi -
Error message: a message session could not be started. Please check your MAPI installation - sending email from MYOB
When I try to send an email to MYOB I get error message saying: "an email session could not be started. Please check your MAPI installation '.
How can I solve this problem?
Hi all
I have a workaround which is a little less boring that the patch "restart the PC": If you get the error where MYOB crashes when you try to send an e-mail, open Task Manager (ctrl-alt-del or right click on the start bar), then go to the "Processes" tab and close all instances of wlmail.exe using the button "complete the process".
It seems that this error occurs if you have Windows Live Mail opened when you try and send emails of MYOB. If you then close WLMail after that get the error the process seems to never close, so you have to close it manually. If you send all your emails with closed WLMail MYOB it seems to be OK.
See you soon
-
I'm very used to make new user accounts and he have done many times, but this is the first time I had trouble with it. I'm just trying to create another user on my computer, but every time I try to create an and log on to it, I get the message: the user profile service service has no opening session/user profile cannot be loaded. I tried to create this profile as a standard user, administrator, and a customer. Does anyone know what is the problem?
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps and happy holidays!
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Disney app will not work on 5510 printer. Error connection server error message:-95
New 5510 printer. All the apps work except Disney. Tried several times. Able to selected photo, preview and select # copies, but after hitting OK error message: "server connection error:-95.. There was a problem connecting to the server. Press Retry to reconnect or OK to change. "Does not work. Help, I want Disney app to work.
If this is the only app that does not work on your printer and after uninstallation and reinstallation of the application, it still does not work, the problem lies in the app and its manufacturer. The fact the other apps are working shows the issue is not with the printer or apps function. I could wait a few days and see if it starts working again, but at this point, there is nothing else to solve problems too long that other applications work properly.
-
ASA - 313005 no link corresponding to the ICMP Error Message
Hello
Nice day! Don't need your help on this 313005 newspapers no link corresponding to the ICMP Error Message. How can I avoid not having the error logs on the ASA?
I've attached a screenshot of the logs.
Thank you.
vrian
vrian
If you want to have the ASA no longer generates the message then you can try this
No message recording 313005
HTH
Rick
-
Hi guys,.
My client has a solution with UCCX 10.6 and the system presented today, in the morning (08:00 more or less) followed the error message: "the request to open a session in the Unified Cisco CCX application server has expired. Please make sure your system is online and try again." After a minute the system back to work without nothing action. I saw the newspapers MIVR and not identify the possible cause of the problem.
Can I help me, please
Thank you
Wilson
These newspapers are not in a readable format. Look for something like lost connection
Concerning
Deepak
-
Error message 5545 ASA Cisco: % ASA-3-210007: READ allocate xlate failed
Hello team,
We have 2 firewall Cisco ASA, active failover / standby.
the waiting for firewall, we see this error message "% ASA-3-210007: READ allocate xlate failed.
This error message is related to the bug?
Thank you for your help,
Best regards
Yunus Saleh
Hi Younous,
This error on the rescue unit could be associated with a problem of memory on the device or memory full on the device.
IF these options are not confirmed, we can consider that your devices version is bug hit.
https://Tools.Cisco.com/bugsearch/bug/CSCub94479/?referring_site=bugquic...
BTW, you send us the "sh version" of your device.
If your version is 'old' or connected to the version mentioned in the BUG system, is high suggests updating your device.
In a law/stb Setup, are also "0 downtime" and updated easy both devices
Let me know
Matteo
Please rate me if the post was beneficial for your solution / questions
-
After I upgraded my ASA to v7.0 (4) I noticed a mistake in the running-config ' ERROR: command requires the failover license "so I removed the interface of the monitor commands and sauvΘs mem but the declarations of the error remained in the running-config. I then copied the startup-config to my tftp server removed the statements of the error and copied then return. I rebooted the ASA and these same error message came back. I did a 'start of show err' and he returned without error. Can someone tell me how to get these messages out of my config.
That you use in a cosmetic bug, nothing to worry about.
See http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsc23718&Submit=Search for more details.
This problem is fixed in 7.0 (4.2) draft code version, you can upgrade to the latest provisional version (7.0 (4.3), fully TAC supported) here:
http://www.Cisco.com/cgi-bin/tablebuild.pl/PIX-interim
You can see in the Notes of all the bug fixes, including one you touch.
-
Trying to opening session c:windows\system32\lfass.exe is corrupt or unreadible error message
When you try to log on to my DELL Dimension 3100 (Windows XP) I get an error message C:wINDOWS\SYSTEM32\LFASS.exe is corrupt or unreadible. Please run the Chkdsk utility.
What I'm doing, some items suggest running the recovery disc but these models do not have a disc in standard?
Any assistance accepted gratfully?
Thnaks
Scott
Hello
1. are you able to boot into Normal mode after receiving this error message?
2. the problem occurs in safe mode?
3 have there been recent changes to the computer before the show?
I suggest to follow the steps provided and check if it helps.
Method 1: How to perform disk error checking in Windows XP: http://support.microsoft.com/kb/315265#method2
Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.
Method 2: How to fix a computer that does not start.
http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start
More information: Advanced Troubleshooting for General startup problems in Windows XP: http://support.microsoft.com/kb/308041
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
(Try all stages except the upgrade on the spot)
Hope this information is useful.
-
"Limit reached" error message on the site license
I work in a school that subscribes to the creative cloud (in fact, my entire division has access to creative cloud). I have creative cloud and various applications (Photoshop, Illustrator, Acrobat, after effects etc.) installed on my computer of the professor. I have a subscription so that I can use creative cloud at home. I want to synchronize my libraries. The problem is when I go to school and try to open Photoshop or any other creative cloud application, I get an error (I posted a screenshot). I have two computers (my home computer and my laptop) that use the two licenses. But my school has a site license. Everything works fine if I just click on the 'X' at the top right and then restarts. But it's just a pain having to do every time I launch Photoshop. I guess at first launch, he's trying to look at my license of individual creative cloud, then when I click the X and the launch, it is looking at my school site license.
We have recently reimagee our computers, that's when it started to happen. I used to be able to start the applications and all my libraries would be fine synchronization; However, now I get this error message. Once I get in the application, my library sync very well, but I would like this message to stop popping up. Is there a way to change the license to this at my school, then identify yourself as me trying to fix this?
What type of license is used at school? Serialized, peripheral licenses or user named (signing on)?
If there are two different Adobe ID involved, so here are the separate accounts each with their own storage.
If you sign in with your ID staff and that you have already connected to two other computers, then the message is correct.
Navigate, sync and manage the assets of the Adobe Creative Cloud
Maybe you are looking for
-
L870 satellite keeps turning off
My laptop keeps itself powered. The battery shows a full charge, but the power light keeps going on and outside
-
need to make space on my pc for re - org hard disk and a user folder size is 14.3 GB
-
missing Windows Sidebar. C: Program Files Application not found.
10 days ago everything worked fine, but now even if I want to customize my dock or I use D T the Application C:/Program Files etc not found keep appearing. Also, whenever I click on Google Chrome or IE etc etc, I get a box popping up that are asked t
-
System interupts causing the high CPU usage, possibly ataport.sys
I have worked on this for a month now and have had no luck looking in other posts. Interrupts system uses a core of my 100% computer. I ran windows performance monitor and it seems to be caused by ataport.sys. The problem happens periodically and wil
-
Why my programs are stopping on their own
I just upgraded from XP to windows 7 Home premium 6-bit (something I was lothe to do first)Since Monday that didn't have any other problems, Ive reformatted twice already and its really me off ticking, my computer was basically unusable for the last