ASA and DAP group policy

Similar Questions

• ASA political anyconnect and default group policy

  Hello world

  ASA is configured with anyconnect tunnel group and anyconnect group policy.

  AnyConnect group policy for

  in ASDM to allow concurrent connections box inherit

  timeout in ASDM watch checkmark on inherit

  By default of exhibitions in political group or system default

  simultaneous connections show 3

  timeout idlle shows 30 mins

  Need to understand that when we create anyconnect group policy and we click on inherit means it will take the value of this field of

  default group policy?

  As above default group policy also indicates that it has simultaneous connections for 3 and if I change to 2 concurrent connections in anyconnect group policy

  then the Group anyconnect policy will take precedence over the default group policy?

  The default system policy also shows idle time-out of 30 minutes that means it disconnects the anyconnect session after 30 minutes?

  Concerning

  Mahesh

  You're right about the strategy of group by default. If you assign a simultaneous connection of different to your group policy for the anyconnect profile these settings will override default group policy. Any changes of setting that explicitly to any group policy on the system replaces what has configured the default group policy.

• Windows 7 Home Premium equivalent Group Policy Editor

  Hello, I need help with a problem regarding the ability to restrict access to the application to another user on my computer. For some reason any Microsoft does not Group Policy Editor in Windows 7 Home Premium. I need to restrict the access of another user to all .exe files, with the exception of a small list of allowed applications. I would also like to be able to restrict access to control the Panel and all other files and folders. I still need to be able to access all applications and files of my administrator account.

  Hello

  Yes there are other ways around the problem, although the easiest by far would be to
  upgrade to Pro and use Group Policy.

  You may activate just of Panel as needed. for your administrator account.

  Or use a file fighting to move or rename the fichiers.cpl you don't want to do
  be able to run. Restrict access to where you put the files.

  This checklist:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/bba4931b-7f55-4104-a1a9-ca5ab18e8cba/stop-user-access-to-control-panel?Forum=winserverGP

  Rob - SpiritX

• Disable the Group Policy registry change

  Initially, I was surprised that, by default, run the Publisher of the registry (regedit) under a standard user account does not have administrative credentials.

  Then I realized that if the administrative credentials are required for editing the registry, virtually all configuration changes would require a command prompt. Also, I learned that UAC controls only the registry keys it considers administrative. Thus, for example, standard users can edit and create the registry keys under HKEY_CURRENT_USER, but no other hives.

  All well and good, but I want to disable my standard user 10 year of directly editing the registry.

  At work, we have Win7 enterprise. I'm a standard user to work and I can't even open the registry editor. I get a message "registry editing has been disabled by your administrator". I assume that there is a group policy setting.

  At home we have Win 7 Professional, which is the Group Policy Editor. Can I create a policy to prevent standard users to start the registry editor, and perhaps for the same message, I see at work?

  This link explains how to activate in windows 7 home premium and lower group policy editor.

  This comment (by Fritz) asks how to do from a programming perspective.

  Sorry, wrong link. Here's the good:
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=18c90c80-8b0a-4906-a4f5-ff24cc2030fb#Filelist

• AnyConnect tunnel-group automatic assignment without selecting any group-tunnel-group-list alias and user-group strategy.

  Objective is that the anyconnect user must select group-alias, so that when a user enters his username and password he must go to his political group and tunnel-group specific. as I removed this command in webvpn 'no tunnel-group-list don't enable '. This I can not connect (user does not authenticate).

  1 - my question is why his past does not?

  Solution:

  If I keep only a single tunnel-group by default and make several group policies and assign to each user with his specific group policy that it works. in user attribute means I have only question following the commands it works, but if I put "group-lock value test-tunnel" that it did not identify.

  Please explain why.

  WebVPN

  allow outside

  limit the cache-fs 50

  SVC disk0:/anyconnect-win-3.0.10055-k9.pkg 1 image

  enable SVC

  internal strategy of group test-gp

  attributes of the strategy of group test-gp

  VPN-tunnel-Protocol svc webvpn

  the address value test-pool pools

  username, password test test

  username test attributes

  VPN-tunnel-Protocol svc

  group-lock value test-tunnel

  Strategy Group-VPN-test-gp

  tunnel-group test-tunnel type remote access

  attributes global-tunnel-group test-tunnel

  Group Policy - by default-test-gp

  tunnel-group test-tunnel webvpn-attributes

  allow group-url https://192.168.168.2/test

  Yes, you have the right solution. You only need to create 1 group of tunnel and multiple group policy. Under the attribute of the user, you re then group policy of vpn that you want the user assigned too.

  You can also authenticate users against AD and configure ldap attribute map to map the user to a specific group policy automatically.

  Here is an example of configuration if you happen to have the AD and will authenticate against AD:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00808d1a7c.shtml

  Hope that helps.

• Configure the timeout and session timeout in a group policy.

  I want a L2L tunnel to establish a period of time, this tunnel is established in a PIX 515E.

  Then I had seen that we must configure the idle time in group policy, but I have no ' t know the difference between the idle timeout setting and the session timeout.

  Anyone know what is the difference between this two command line.

  Thank you

  Hello

  Session-Timeout: at the end of this time, the security apparatus terminates the connection.

  Idle-timeout: If there is no communication on the connection activity in this period, the security apparatus terminates the connection.

  Please see the below URL for more details.

  http://www.Cisco.com/en/us/docs/security/ASA/asa70/command/reference/TZ.html#wp1281883

  http://www.Cisco.com/en/us/docs/security/ASA/asa70/configuration/guide/vpngrp.html

  Kind regards

  Arul

  * Rate pls if it helps *.

• ASA and group URL

  So I have the need to provide two SSL VPN environments for two different clients on the same ASA 5510 appliance.  Can I create two group policies, each with a group unique url and then assign a certificate corresponding to the Group url?  From the point of view of the intellectual property, they would all be hitting the same outside IP address.

  Ex:

  Group_policy: customer

  Group URL: https://remote.customera.com

  SSL certificate: remote.customera.com

  Group_policy: CustomerB

  Group URL: https://remote.customerb.com

  SSL certificate: remote.customerb.com

  Thank you!

  -Craig

  Hey Craig,.

  On your request, let me divide 2 parts:

  1. can you use 2 different urls on the SAA for two separate connection profiles

  2. can you use 2 separate certificates to validate the two URLS

  Regarding your first question, yes it is possible. You will need to create 2 separate group policy and 2 connection profiles Tunnel aka groups. Under each tunnel group define a separate url group and assign the corresponding group policy. Your configuration might look like this:

  In-house strategy group customer ASA (config) #.
  Strategy of customer attributes group ASA (config) #.

  .

  .

  .

  (to configure the respective attribute)

  ASA (config) # Tunnel - group customer type remote access
  ASA (config) # Tunnel - group customer General attributes
  ASA(config-tunnel-General) # by default-group-policy customer

  ASA (config) # tunnel - group customer webvpn-attributes

  ASA(config-tunnel-WebVPN) # group - url https://ASA1/remote.customera.com

  Repeat the steps above and replace "customer" by "CustomerB".

  As for your second question, you can only configure a trustpoint to be used with a single interface. If you do one of the following:

  1. get a UCC (Unified Client certificate) to your ASA:

  Get a UCC with multiple CNs / without (Subject Alternative Name extensions) for each domain COMPLETE/IP ASA. If you need a certificate of the UCC with CN to FQDN or IP and no master for each SAA: ASA-1 FQDN or IP, ASA-2 FULL FQDN or IP domain name and so on. Several suppliers PKI/certificates are supported entrust.com, verisign, UCC:godaddy.com, etc.

  Note: the ASA cannot generate a certificate request (CSR) signature with multiple WITHOUT (CSCso70867 is development requesting this capability), so you must be the seller of the PKI to submit the entry for you.

  ASA set a trustpoint "and Install/import the UCC certifcate in this trustpoint. Bind this trustpoint to the external interface.

  2 OR a certificate with wildcards. Generic certificates are discouraged in favour of the UUC certs. According to a seller, Entrust, these are the 2 main reasons:

  1. UCC is more secure than Wildcard certificates since Entrust UC Certificates specify exactly the hosts and domains must be protected
  2. UCC is more flexible than Wildcard certificates since Entrust UC certificates are not limited to a single domain

  I hope this helps.

  Kind regards

  ATRI

• What are the differences between the services and site domain group policy and group policy?

  What are the differences between the services and site domain group policy and group policy?

  Server must wonder about the Technet site.  http://social.technet.Microsoft.com/forums/en-us/home

• Impossible to replace and update a file in the client computers through Group Policy preferences

  Hello

  I am unable to replace and update a file in the client computers through Group Policy preferences.

  For example,.

  I am trying to replace and update a custom calendar file (c:\Program Files\Microsoft Office\Office12\1033\outlook.hol)to client computers through Group Policy ptreferences (political group: computer configuration\group policy setting \file preference\windows).) But it is not updated and replaced in client computers.

  Could you please help me on this?

  THnaks

  Srinivasan

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the following link for assistance:

  http://social.technet.Microsoft.com/forums/en/winserverGP/threads

• Instalation of process, removal, and enumeration for softwear application deployed via Group Policy. How did

  Processes a request instalation, removal, and enumeration for softwear deployed via Group Policy. How Group Policy How did for me.

  Hello
   
  I suggest you contact the Technet forum, where we have some support professionals who are well equipped with knowledge on area issues, to do so please visit the link provided below.
   
  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads
  

• User tab is missing from the snap-in group policy in Microsoft Management Console (MMC) and Windows XP users

  I'm trying to add the user and group policy in Windows XP in MMC. However, when I click on browse, it has no user inside tab. How an application policy for a certain group of users?

  Hi Muhammad,

  Your computer is connected to the server or domain?

  If your computer is in a domain environment, please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• Local administrator account and issue of local Group Policy permissions problem.

  You have a local administrator account where it was defined

  http://img26.imageshack.us/img26/5716/18112010133154.PNG

  I think preventing the admin account to remove or install devices.  This causes a problem.  Looks like it's AD GP as is grayed out and I can't add locally.  The network team claim there is no GPs AD to limit the admin account local they know of.

  Also, I try to use the process on the machine monitor, but who needs administrator rights and he repeats that the local administrator account is not a member of the Administrators group, but it is.

  Any ideas?  Even if it's just he Process Monitor bit setting?

  And looking at the photo can someone explain which means that icon next to load and unload device drivers.  It is different from the others and think that it is linked, may be trying to tell me that it is a strategy of AD Group.

  I talked to the networks, they said there is not together AD GP for this.  I used the local administrator account to create a new local administrator account and put it in the Administrators group.  Connected to it and it also has the same problem.

  Any ideas?

  The symbol, that you reference indicates that the setting has been locked by group policy and is not editable.  When I saw it in the past, the only way I could replace, it is using "secedit".  For more information about this command:
  Starting-> help and support-> Search: Secedit

  "Elephant Gun" approach might also work:

  "How to restore the security settings the default settings?
    <>http://support.Microsoft.com/kb/313222 >

  HTH,
  JW

• On a windows 2000 Server computer how to configure Group Policy to prevent my students to always change the desktop background and screen saver? __I want to set a screen saver and corporate logo.

  The server is a standard computer on Windows 2000 server and the workstations are XP.  We will be upgrading our servers next year, but for now I have to use what I have.  I do not know true with Windows 2000 Server Edition.

  You have posted in a forum for issues of office and customization for the Windows XP operating system. Your question has to do with Windows Server and group policy. Here's a great site to help you with your server issues:

  http://www.Petri.co.il

  Questions on group policy can be asked in the TechNet forums or in the Group Policy newsgroup:

  In a News Reader: microsoft.public.windows.group_policy
  On the web: http://www.microsoft.com/communities/newsgroups/list/en-us/default.aspx?dg= microsoft.public.windows.group_policy

  http://social.technet.Microsoft.com/forums/en/categories/ MS - MVP - Elephant Boy computers - don't panic!

• Windows defender and he says Defender is disabled by group policy? That is what it is?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • JUST a SUBSCRIPTION to McAFEE SECURITY WAS EXHAUSTED
  • CANNOT OPEN WINDOWS DEFENDER
  • SAYS WINDOWS DEFENDER IS DISABLED BY GROUP POLICY?

  First, go to your application of features & programs or add remove & uninstall your McAfee has expired.
  Then, you use McAfee Removal Tool to remove the 'remains' of McAfee from the system. Here is the link:
  http://www.pchell.com/virus/uninstallmcafee.shtml
  Scroll down until you see:
  Follow these instructions to download the McAfee removal tool and run it to remove the programs above.
  (download the removal tool, then run it)

  When this is done, here is how to restart Windows Defender:

  Start button > in the search box, typeServices> press the Enter key > scroll to find Windows Defender, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on Windows Defender > click Properties > in the new window, make the necessary changes, as above > click OK when finished.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Whenever I insert a USB in my PC is not autoplay, I do not have available to all group policy, and I can't read or write CD/DVD

  Original title: "Autoplay, group policy and CD/DVD"

  Hello

  I have two questions actually worry,

  First of all, I have Windows Vista Home Premium Service Pack 1 installed on my PC

  My first problem is that whenver I insert a USB in my PC it doesn't autoplay and the option is not available at all even when I get clich the drive itself, I went Microsoft support and installed security update 950582 and still no hope. I also can't find the NoDriveAutoRun or NoDriveTypeAutoRun in the registry because I don't have the key explore in both policies.

  In addition, I have not available to all group policy.

  My second question is that I can't read or write CD/DVD even if I have the driver installed, I tried the DVD Microsoft repair but it shows that the repair failed.

  Thanks in advance and hope to receive a solution soon.

  SAS ING.

  Hi Sas Eng,

  There are a few solutions to the question of automatic playback on the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  And if the solutions provided for the DVD ROM Lorien did not help, as you say, it is probably a hardware fault.

  Try the steps are on the link and let me know if it helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.